! Started logfile: /vlbi/vcs9/uvm//J0945+2640_X_a_dfm.log on Tue Dec 26 22:07:53 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0945+2640_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0945+2640_X_a_uvm.fits ! AN table 1: 18 integrations on 6 of 6 possible baselines. ! AN table 2: 17 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.981132 visibilities/baseline/integration-bin. ! Found source: J0945+2640 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 1248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0945+2640_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.035599 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000942Jy sigma=24.128093 ! Fit after self-cal, rms=0.977405Jy sigma=23.611641 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=6.985 mas, bmaj=7.713 mas, bpa=-84.78 degrees ! Estimated noise=0.882623 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190522 Jy ! Component: 100 - total flux cleaned = 0.0222262 Jy ! Total flux subtracted in 100 components = 0.0222262 Jy ! Clean residual min=-0.001616 max=0.001432 Jy/beam ! Clean residual mean=-0.000011 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0222262 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0222262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027197Jy sigma=0.561228 ! Fit after self-cal, rms=0.027175Jy sigma=0.560397 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.691 mas, bmaj=7.489 mas, bpa=49.8 degrees ! Estimated noise=0.829995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131687 Jy ! Component: 100 - total flux cleaned = 0.00210719 Jy ! Component: 150 - total flux cleaned = 0.00266325 Jy ! Component: 200 - total flux cleaned = 0.00309031 Jy ! Total flux subtracted in 200 components = 0.00309031 Jy ! Clean residual min=-0.001145 max=0.001032 Jy/beam ! Clean residual mean=-0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0253165 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 82 model components to the UV plane model. ! The established model now contains 99 components and 0.0253165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027111Jy sigma=0.558893 ! Fit after self-cal, rms=0.027107Jy sigma=0.558870 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03091 ! Telescope amplitude corrections in sub-array 1: ! FD 1.13 KP 1.02 LA 0.93 PT 0.79 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.958261 ! Telescope amplitude corrections in sub-array 1: ! FD 1.24 KP 0.93 LA 1.06 PT 0.95 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.950986 ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.00 LA 1.00 PT 1.16 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.938213 ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.27 LA 1.30 PT 0.67 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.943503 ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 KP 1.19 LA 0.90 PT 0.97 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00234 ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 KP 0.91 LA 1.03 PT 0.95 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02579 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.96 LA 1.01 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.969276 ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 KP 0.77 LA 1.52 PT 0.92 ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1 ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* LA 0.00* PT 0.00* ! ! ! Fit before self-cal, rms=0.027107Jy sigma=0.558870 ! Fit after self-cal, rms=0.026676Jy sigma=0.563142 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026676Jy sigma=0.563142 ! Fit after self-cal, rms=0.026679Jy sigma=0.563063 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.947 mas, bmaj=7.982 mas, bpa=2.004 degrees ! Estimated noise=1.00272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000789455 Jy ! Component: 100 - total flux cleaned = -0.000769886 Jy ! Component: 150 - total flux cleaned = -0.000720291 Jy ! Component: 200 - total flux cleaned = -0.000666536 Jy ! Total flux subtracted in 200 components = -0.000666536 Jy ! Clean residual min=-0.000539 max=0.000615 Jy/beam ! Clean residual mean=-0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.02465 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 138 components and 0.02465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026676Jy sigma=0.562425 ! Fit after self-cal, rms=0.026674Jy sigma=0.562419 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026674Jy sigma=0.562419 ! Fit after self-cal, rms=0.026677Jy sigma=0.561907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.27757e-05 Jy ! Component: 100 - total flux cleaned = 0.000113588 Jy ! Component: 150 - total flux cleaned = 0.000139123 Jy ! Component: 200 - total flux cleaned = 0.000152053 Jy ! Total flux subtracted in 200 components = 0.000152053 Jy ! Clean residual min=-0.000501 max=0.000543 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.024802 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 0.024802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026677Jy sigma=0.561859 ! Fit after self-cal, rms=0.026694Jy sigma=0.561834 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.947 x 7.982 at 2.004 degrees (North through East) ! Clean map min=-0.00047628 max=0.020234 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.987 mas, bmaj=8.099 mas, bpa=-16.43 degrees ! Estimated noise=1.06753 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170554 Jy ! Component: 100 - total flux cleaned = 0.0196927 Jy ! Component: 150 - total flux cleaned = 0.0209961 Jy ! Component: 200 - total flux cleaned = 0.0218462 Jy ! Total flux subtracted in 200 components = 0.0218462 Jy ! Clean residual min=-0.000785 max=0.000810 Jy/beam ! Clean residual mean=-0.000002 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.0218462 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.0218462 Jy ! Inverting map and beam ! Estimated beam: bmin=5.947 mas, bmaj=7.982 mas, bpa=2.004 degrees ! Estimated noise=1.00272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814532 Jy ! Component: 100 - total flux cleaned = 0.0013004 Jy ! Component: 150 - total flux cleaned = 0.00164958 Jy ! Component: 200 - total flux cleaned = 0.00193696 Jy ! Total flux subtracted in 200 components = 0.00193696 Jy ! Clean residual min=-0.000508 max=0.000552 Jy/beam ! Clean residual mean=-0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0237832 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 113 components and 0.0237832 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244009 Jy ! Component: 100 - total flux cleaned = 0.000453115 Jy ! Component: 150 - total flux cleaned = 0.000633031 Jy ! Component: 200 - total flux cleaned = 0.000788071 Jy ! Total flux subtracted in 200 components = 0.000788071 Jy ! Clean residual min=-0.000484 max=0.000516 Jy/beam ! Clean residual mean=-0.000001 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0245713 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.0245713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026695Jy sigma=0.561826 ! Fit after self-cal, rms=0.026712Jy sigma=0.561855 wmodel J0945+2640_X_map.mod ! Writing 132 model components to file: J0945+2640_X_map.mod wobs J0945+2640_X_uvs.fits ! Writing UV FITS file: J0945+2640_X_uvs.fits wwins J0945+2640_X_map.win ! wwins: Wrote 1 windows to J0945+2640_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.62286e-05 Jy ! Component: 100 - total flux cleaned = -4.58669e-05 Jy ! Component: 150 - total flux cleaned = -9.28844e-05 Jy ! Component: 200 - total flux cleaned = -0.000130575 Jy ! Component: 250 - total flux cleaned = -0.000150633 Jy ! Component: 300 - total flux cleaned = -0.000164607 Jy ! Component: 350 - total flux cleaned = -0.000177834 Jy ! Component: 400 - total flux cleaned = -0.000190419 Jy ! Component: 450 - total flux cleaned = -0.000206487 Jy ! Component: 500 - total flux cleaned = -0.000221919 Jy ! Component: 550 - total flux cleaned = -0.000251894 Jy ! Component: 600 - total flux cleaned = -0.00028892 Jy ! Component: 650 - total flux cleaned = -0.000318283 Jy ! Component: 700 - total flux cleaned = -0.000343835 Jy ! Component: 750 - total flux cleaned = -0.00036581 Jy ! Component: 800 - total flux cleaned = -0.000387909 Jy ! Component: 850 - total flux cleaned = -0.000406491 Jy ! Component: 900 - total flux cleaned = -0.000432764 Jy ! Component: 950 - total flux cleaned = -0.000440393 Jy ! Component: 1000 - total flux cleaned = -0.000448105 Jy ! Component: 1050 - total flux cleaned = -0.000455934 Jy ! Component: 1100 - total flux cleaned = -0.000459983 Jy ! Component: 1150 - total flux cleaned = -0.000464073 Jy ! Component: 1200 - total flux cleaned = -0.000459814 Jy ! Component: 1250 - total flux cleaned = -0.000455503 Jy ! Component: 1300 - total flux cleaned = -0.000451081 Jy ! Component: 1350 - total flux cleaned = -0.000455613 Jy ! Component: 1400 - total flux cleaned = -0.000460425 Jy ! Component: 1450 - total flux cleaned = -0.000460555 Jy ! Component: 1500 - total flux cleaned = -0.000460668 Jy ! Component: 1550 - total flux cleaned = -0.000465882 Jy ! Component: 1600 - total flux cleaned = -0.000460438 Jy ! Component: 1650 - total flux cleaned = -0.000465844 Jy ! Component: 1700 - total flux cleaned = -0.000471446 Jy ! Component: 1750 - total flux cleaned = -0.000477278 Jy ! Component: 1800 - total flux cleaned = -0.00048349 Jy ! Component: 1850 - total flux cleaned = -0.000489908 Jy ! Component: 1900 - total flux cleaned = -0.000489956 Jy ! Component: 1950 - total flux cleaned = -0.000503382 Jy ! Component: 2000 - total flux cleaned = -0.000503479 Jy ! Component: 2050 - total flux cleaned = -0.0005249 Jy ! Component: 2100 - total flux cleaned = -0.00056176 Jy ! Component: 2150 - total flux cleaned = -0.000592413 Jy ! Component: 2200 - total flux cleaned = -0.000632268 Jy ! Component: 2250 - total flux cleaned = -0.000665486 Jy ! Component: 2300 - total flux cleaned = -0.000699737 Jy ! Component: 2350 - total flux cleaned = -0.000735178 Jy ! Component: 2400 - total flux cleaned = -0.000781374 Jy ! Component: 2450 - total flux cleaned = -0.000819892 Jy ! Component: 2500 - total flux cleaned = -0.000859784 Jy ! Component: 2550 - total flux cleaned = -0.00091179 Jy ! Component: 2600 - total flux cleaned = -0.000944254 Jy ! Component: 2650 - total flux cleaned = -0.00100033 Jy ! Component: 2700 - total flux cleaned = -0.00104702 Jy ! Component: 2750 - total flux cleaned = -0.00109557 Jy ! Component: 2800 - total flux cleaned = -0.00114604 Jy ! Component: 2850 - total flux cleaned = -0.00119849 Jy ! Component: 2900 - total flux cleaned = -0.00123913 Jy ! Component: 2950 - total flux cleaned = -0.00129519 Jy ! Component: 3000 - total flux cleaned = -0.00135373 Jy ! Component: 3050 - total flux cleaned = -0.00142991 Jy ! Component: 3100 - total flux cleaned = -0.00147771 Jy ! Component: 3150 - total flux cleaned = -0.0015104 Jy ! Component: 3200 - total flux cleaned = -0.00154479 Jy ! Component: 3250 - total flux cleaned = -0.00158067 Jy ! Component: 3300 - total flux cleaned = -0.00161775 Jy ! Component: 3350 - total flux cleaned = -0.00163739 Jy ! Component: 3400 - total flux cleaned = -0.00167814 Jy ! Component: 3450 - total flux cleaned = -0.00169907 Jy ! Component: 3500 - total flux cleaned = -0.0017429 Jy ! Component: 3550 - total flux cleaned = -0.0017892 Jy ! Component: 3600 - total flux cleaned = -0.00181286 Jy ! Component: 3650 - total flux cleaned = -0.00186265 Jy ! Component: 3700 - total flux cleaned = -0.00188846 Jy ! Component: 3750 - total flux cleaned = -0.00191508 Jy ! Component: 3800 - total flux cleaned = -0.00194273 Jy ! Component: 3850 - total flux cleaned = -0.00197145 Jy ! Component: 3900 - total flux cleaned = -0.00200155 Jy ! Component: 3950 - total flux cleaned = -0.00203327 Jy ! Component: 4000 - total flux cleaned = -0.00203299 Jy ! Component: 4050 - total flux cleaned = -0.00206621 Jy ! Total flux subtracted in 4096 components = -0.00206561 Jy ! Clean residual min=-0.002188 max=0.002009 Jy/beam ! Clean residual mean=-0.000002 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0225056 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 326 components and 0.0225057 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0945+2640_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.947 x 7.982 at 2.004 degrees (North through East) ! Clean map min=-0.0043242 max=0.020421 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0945+2640_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0945+2640_X_a_map.mod ! Writing 326 model components to file: /vlbi/vcs9/uvm//J0945+2640_X_a_map.mod wobs /vlbi/vcs9/uvm//J0945+2640_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0945+2640_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0945+2640_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0945+2640_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0204208 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000698582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.2628 10.2628 20.5256 41.0513 82.1025 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.02 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 29.231 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0945+2640_X_a_dfm.log closed on Tue Dec 26 22:07:57 2017