! Started logfile: /vlbi/vcs9/uvm//J0813+4813_X_a_dfm.log on Tue Dec 26 21:59:30 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0813+4813_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0813+4813_X_a_uvm.fits ! AN table 1: 106 integrations on 21 of 21 possible baselines. ! AN table 2: 119 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914391 visibilities/baseline/integration-bin. ! Found source: J0813+4813 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 55456 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0813+4813_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0285957 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 742 telescope corrections were flagged in sub-array 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000281Jy sigma=25.840048 ! Fit after self-cal, rms=0.990599Jy sigma=25.590994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7351 mas, bmaj=2.779 mas, bpa=33.11 degrees ! Estimated noise=0.376415 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00867531 Jy ! Component: 100 - total flux cleaned = 0.00934793 Jy ! Total flux subtracted in 100 components = 0.00934793 Jy ! Clean residual min=-0.001142 max=0.001093 Jy/beam ! Clean residual mean=0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.00934793 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.00934793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026868Jy sigma=0.671274 ! Fit after self-cal, rms=0.026859Jy sigma=0.671040 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=2.779 mas, bpa=33.52 degrees ! Estimated noise=0.137969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139424 Jy ! Component: 100 - total flux cleaned = -0.000182625 Jy ! Component: 150 - total flux cleaned = -0.000213366 Jy ! Component: 200 - total flux cleaned = -0.000207352 Jy ! Total flux subtracted in 200 components = -0.000207352 Jy ! Clean residual min=-0.000433 max=0.000573 Jy/beam ! Clean residual mean=-0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.00914058 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.00914058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026853Jy sigma=0.670870 ! Fit after self-cal, rms=0.026853Jy sigma=0.670869 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.962802 ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 0.79 HN 1.07 KP 1.17 ! LA 1.14 MK 0.85 NL 1.06 OV 1.06 ! PT 1.31 SC 1.16 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.9368 ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.26 HN 1.19 KP 0.92 ! LA 1.03 MK 0.82 NL 0.97 OV 1.12 ! PT 1.20 SC 1.21 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.966016 ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.97 HN 1.08 KP 0.92 ! LA 1.05 MK 0.84 NL 1.10 OV 1.11 ! PT 1.04 SC 1.11 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.980644 ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 0.85 HN 1.03 KP 0.96 ! LA 1.07 MK 0.88 NL 1.10 OV 1.10 ! PT 0.91 SC 1.09 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00714 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.95 KP 0.82 ! LA 1.14 MK 0.99 NL 1.03 OV 1.01 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.996756 ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.89 HN 0.89 KP 0.96 ! LA 1.01 MK 0.92 NL 0.99 OV 0.94 ! PT 1.14 SC 1.06 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00824 ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.98 HN 1.00 KP 0.88 ! LA 0.96 MK 0.86 NL 1.20 OV 0.93 ! PT 1.29 SC 0.93 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00311 ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.88 HN 0.97 KP 1.05 ! LA 1.11 MK 0.99 NL 1.22 OV 0.84 ! PT 1.10 SC 0.91 ! ! ! Fit before self-cal, rms=0.026853Jy sigma=0.670869 ! Fit after self-cal, rms=0.026806Jy sigma=0.669619 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026806Jy sigma=0.669619 ! Fit after self-cal, rms=0.026806Jy sigma=0.669617 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=2.729 mas, bpa=33.45 degrees ! Estimated noise=0.130898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.99793e-05 Jy ! Component: 100 - total flux cleaned = -1.53649e-05 Jy ! Component: 150 - total flux cleaned = 2.83961e-05 Jy ! Component: 200 - total flux cleaned = 4.77116e-05 Jy ! Total flux subtracted in 200 components = 4.77116e-05 Jy ! Clean residual min=-0.000344 max=0.000343 Jy/beam ! Clean residual mean=0.000000 rms=0.000081 Jy/beam ! Combined flux in latest and established models = 0.00918829 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.00918829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026803Jy sigma=0.669497 ! Fit after self-cal, rms=0.026804Jy sigma=0.669496 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026804Jy sigma=0.669496 ! Fit after self-cal, rms=0.026753Jy sigma=0.667968 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111632 Jy ! Component: 100 - total flux cleaned = 0.000151504 Jy ! Component: 150 - total flux cleaned = 0.000165076 Jy ! Component: 200 - total flux cleaned = 0.000179266 Jy ! Total flux subtracted in 200 components = 0.000179266 Jy ! Clean residual min=-0.000349 max=0.000342 Jy/beam ! Clean residual mean=0.000000 rms=0.000081 Jy/beam ! Combined flux in latest and established models = 0.00936756 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.00936756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026753Jy sigma=0.667950 ! Fit after self-cal, rms=0.026748Jy sigma=0.667803 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.064 x 2.729 at 33.45 degrees (North through East) ! Clean map min=-0.00032716 max=0.0096193 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7325 mas, bmaj=2.777 mas, bpa=32.88 degrees ! Estimated noise=0.360363 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842237 Jy ! Component: 100 - total flux cleaned = 0.00917685 Jy ! Component: 150 - total flux cleaned = 0.00942329 Jy ! Component: 200 - total flux cleaned = 0.00955618 Jy ! Total flux subtracted in 200 components = 0.00955618 Jy ! Clean residual min=-0.001000 max=0.000943 Jy/beam ! Clean residual mean=0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.00955618 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.00955618 Jy ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=2.729 mas, bpa=33.45 degrees ! Estimated noise=0.130898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165436 Jy ! Component: 100 - total flux cleaned = -0.00015555 Jy ! Component: 150 - total flux cleaned = -0.000163093 Jy ! Component: 200 - total flux cleaned = -0.000158543 Jy ! Total flux subtracted in 200 components = -0.000158543 Jy ! Clean residual min=-0.000340 max=0.000350 Jy/beam ! Clean residual mean=0.000000 rms=0.000083 Jy/beam ! Combined flux in latest and established models = 0.00939763 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.00939763 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.41152e-06 Jy ! Component: 100 - total flux cleaned = 1.5492e-05 Jy ! Component: 150 - total flux cleaned = 1.86565e-05 Jy ! Component: 200 - total flux cleaned = 2.41632e-05 Jy ! Total flux subtracted in 200 components = 2.41632e-05 Jy ! Clean residual min=-0.000342 max=0.000351 Jy/beam ! Clean residual mean=0.000000 rms=0.000082 Jy/beam ! Combined flux in latest and established models = 0.0094218 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.0094218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026747Jy sigma=0.667803 ! Fit after self-cal, rms=0.026747Jy sigma=0.667788 wmodel J0813+4813_X_map.mod ! Writing 40 model components to file: J0813+4813_X_map.mod wobs J0813+4813_X_uvs.fits ! Writing UV FITS file: J0813+4813_X_uvs.fits wwins J0813+4813_X_map.win ! wwins: Wrote 1 windows to J0813+4813_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.0925e-05 Jy ! Component: 100 - total flux cleaned = -1.31929e-05 Jy ! Component: 150 - total flux cleaned = -3.47475e-05 Jy ! Component: 200 - total flux cleaned = -4.49336e-05 Jy ! Component: 250 - total flux cleaned = -4.49331e-05 Jy ! Component: 300 - total flux cleaned = -4.99025e-05 Jy ! Component: 350 - total flux cleaned = -4.99369e-05 Jy ! Component: 400 - total flux cleaned = -6.83566e-05 Jy ! Component: 450 - total flux cleaned = -8.63063e-05 Jy ! Component: 500 - total flux cleaned = -0.000103891 Jy ! Component: 550 - total flux cleaned = -0.000120981 Jy ! Component: 600 - total flux cleaned = -0.000125112 Jy ! Component: 650 - total flux cleaned = -0.000133388 Jy ! Component: 700 - total flux cleaned = -0.000145618 Jy ! Component: 750 - total flux cleaned = -0.000153683 Jy ! Component: 800 - total flux cleaned = -0.000169459 Jy ! Component: 850 - total flux cleaned = -0.000188838 Jy ! Component: 900 - total flux cleaned = -0.000204073 Jy ! Component: 950 - total flux cleaned = -0.00021536 Jy ! Component: 1000 - total flux cleaned = -0.000237595 Jy ! Component: 1050 - total flux cleaned = -0.000255822 Jy ! Component: 1100 - total flux cleaned = -0.000266577 Jy ! Component: 1150 - total flux cleaned = -0.000287836 Jy ! Component: 1200 - total flux cleaned = -0.000305348 Jy ! Component: 1250 - total flux cleaned = -0.00031573 Jy ! Component: 1300 - total flux cleaned = -0.000339667 Jy ! Component: 1350 - total flux cleaned = -0.000356554 Jy ! Component: 1400 - total flux cleaned = -0.000373193 Jy ! Component: 1450 - total flux cleaned = -0.000392994 Jy ! Component: 1500 - total flux cleaned = -0.000406035 Jy ! Component: 1550 - total flux cleaned = -0.000415741 Jy ! Component: 1600 - total flux cleaned = -0.000438112 Jy ! Component: 1650 - total flux cleaned = -0.000450749 Jy ! Component: 1700 - total flux cleaned = -0.000460162 Jy ! Component: 1750 - total flux cleaned = -0.000487938 Jy ! Component: 1800 - total flux cleaned = -0.000503214 Jy ! Component: 1850 - total flux cleaned = -0.000512346 Jy ! Component: 1900 - total flux cleaned = -0.000530403 Jy ! Component: 1950 - total flux cleaned = -0.000542365 Jy ! Component: 2000 - total flux cleaned = -0.000563018 Jy ! Component: 2050 - total flux cleaned = -0.000580575 Jy ! Component: 2100 - total flux cleaned = -0.000595083 Jy ! Component: 2150 - total flux cleaned = -0.000612332 Jy ! Component: 2200 - total flux cleaned = -0.000623703 Jy ! Component: 2250 - total flux cleaned = -0.000640648 Jy ! Component: 2300 - total flux cleaned = -0.000654676 Jy ! Component: 2350 - total flux cleaned = -0.000663038 Jy ! Component: 2400 - total flux cleaned = -0.000682363 Jy ! Component: 2450 - total flux cleaned = -0.000693289 Jy ! Component: 2500 - total flux cleaned = -0.000704167 Jy ! Component: 2550 - total flux cleaned = -0.000720373 Jy ! Component: 2600 - total flux cleaned = -0.000733775 Jy ! Component: 2650 - total flux cleaned = -0.000744411 Jy ! Component: 2700 - total flux cleaned = -0.000749695 Jy ! Component: 2750 - total flux cleaned = -0.000770608 Jy ! Component: 2800 - total flux cleaned = -0.000780957 Jy ! Component: 2850 - total flux cleaned = -0.000783565 Jy ! Component: 2900 - total flux cleaned = -0.000788729 Jy ! Component: 2950 - total flux cleaned = -0.000809089 Jy ! Component: 3000 - total flux cleaned = -0.000819221 Jy ! Component: 3050 - total flux cleaned = -0.000829249 Jy ! Component: 3100 - total flux cleaned = -0.000829241 Jy ! Component: 3150 - total flux cleaned = -0.000841646 Jy ! Component: 3200 - total flux cleaned = -0.000846588 Jy ! Component: 3250 - total flux cleaned = -0.000846615 Jy ! Component: 3300 - total flux cleaned = -0.000856363 Jy ! Component: 3350 - total flux cleaned = -0.000870896 Jy ! Component: 3400 - total flux cleaned = -0.000875702 Jy ! Component: 3450 - total flux cleaned = -0.000878074 Jy ! Component: 3500 - total flux cleaned = -0.000887584 Jy ! Component: 3550 - total flux cleaned = -0.000887565 Jy ! Component: 3600 - total flux cleaned = -0.000894597 Jy ! Component: 3650 - total flux cleaned = -0.000899263 Jy ! Component: 3700 - total flux cleaned = -0.000896954 Jy ! Component: 3750 - total flux cleaned = -0.000908509 Jy ! Component: 3800 - total flux cleaned = -0.000906206 Jy ! Component: 3850 - total flux cleaned = -0.00091308 Jy ! Component: 3900 - total flux cleaned = -0.000910821 Jy ! Component: 3950 - total flux cleaned = -0.000910814 Jy ! Component: 4000 - total flux cleaned = -0.00090858 Jy ! Component: 4050 - total flux cleaned = -0.000910801 Jy ! Total flux subtracted in 4096 components = -0.000906353 Jy ! Clean residual min=-0.000129 max=0.000146 Jy/beam ! Clean residual mean=0.000000 rms=0.000039 Jy/beam ! Combined flux in latest and established models = 0.00851544 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 299 components and 0.00851545 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0813+4813_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.064 x 2.729 at 33.45 degrees (North through East) ! Clean map min=-0.00026176 max=0.009601 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0813+4813_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0813+4813_X_a_map.mod ! Writing 299 model components to file: /vlbi/vcs9/uvm//J0813+4813_X_a_map.mod wobs /vlbi/vcs9/uvm//J0813+4813_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0813+4813_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0813+4813_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0813+4813_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00960104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 3.77583e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17982 1.17982 2.35964 4.71928 9.43856 18.8771 37.7542 75.5085 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.009 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 254.276 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0813+4813_X_a_dfm.log closed on Tue Dec 26 21:59:34 2017