! Started logfile: /vlbi/vcs9/uvm//J0804+470A_C_a_dfm.log on Tue Dec 26 21:57:55 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0804+470A_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0804+470A_C_a_uvm.fits
! AN table 1: 270 integrations on 21 of 21 possible baselines.
! AN table 2: 39 integrations on 1 of 1 possible baselines.
! AN table 3: 82 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.655155 visibilities/baseline/integration-bin.
! Found source: J0804+470A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 30352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0804+470A_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0335476 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 321 telescope corrections were flagged in sub-array 1.
!  A total of 78 telescope corrections were flagged in sub-array 2.
!  A total of 164 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000622Jy  sigma=35.024960
! Fit after  self-cal, rms=0.984358Jy  sigma=34.584721
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=4.066 mas, bmaj=4.941 mas, bpa=66.09 degrees
! Estimated noise=0.234032 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115706 Jy
! Component: 100  -  total flux cleaned = 0.0150488 Jy
! Total flux subtracted in 100 components = 0.0150488 Jy
! Clean residual min=-0.002245 max=0.001800 Jy/beam
! Clean residual mean=0.000000 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.0150488 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.0150488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029265Jy  sigma=1.003722
! Fit after  self-cal, rms=0.029248Jy  sigma=1.003139
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.734 mas, bmaj=6.16 mas, bpa=60.26 degrees
! Estimated noise=0.117444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617709 Jy
! Component: 100  -  total flux cleaned = 0.00960794 Jy
! Component: 150  -  total flux cleaned = 0.0115607 Jy
! Component: 200  -  total flux cleaned = 0.0126803 Jy
! Total flux subtracted in 200 components = 0.0126803 Jy
! Clean residual min=-0.003641 max=0.003009 Jy/beam
! Clean residual mean=0.000005 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.0277291 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 83 components and 0.0277291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028568Jy  sigma=0.968262
! Fit after  self-cal, rms=0.028564Jy  sigma=0.968080
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02323
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.58     KP        1.23     LA        0.82     
!   NL        0.87     OV        1.07     PT        1.06     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.97507
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.66     KP        1.42     LA        0.85     
!   NL        0.98     OV        1.09     PT        1.02     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.975521
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.64     KP        1.49     LA        0.96     
!   NL        0.96     OV        1.06     PT        1.02     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.812504
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.30     FD        0.61     KP        2.18     LA        1.00     
!   NL        1.35     OV        1.16     PT        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.903444
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.68     KP        1.63     LA        0.93     
!   NL        1.05     OV        1.24     PT        1.26     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.839851
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.92     KP        1.62     LA        0.74     
!   NL        1.06     OV        1.45     PT        1.37     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.870587
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.87     KP        1.65     LA        0.95     
!   NL        0.95     OV        1.33     PT        1.27     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.820911
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        0.98     KP        1.79     LA        0.75     
!   NL        0.94     OV        1.29     PT        1.51     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.028564Jy  sigma=0.968080
! Fit after  self-cal, rms=0.028556Jy  sigma=0.960392
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028556Jy  sigma=0.960392
! Fit after  self-cal, rms=0.028608Jy  sigma=0.959298
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.725 mas, bmaj=6.726 mas, bpa=60.01 degrees
! Estimated noise=0.0900325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00349719 Jy
! Component: 100  -  total flux cleaned = -0.00480402 Jy
! Component: 150  -  total flux cleaned = -0.00542462 Jy
! Component: 200  -  total flux cleaned = -0.00567999 Jy
! Total flux subtracted in 200 components = -0.00567999 Jy
! Clean residual min=-0.002145 max=0.002314 Jy/beam
! Clean residual mean=0.000002 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.0220491 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 121 components and 0.0220491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028433Jy  sigma=0.941304
! Fit after  self-cal, rms=0.028432Jy  sigma=0.941287
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028432Jy  sigma=0.941287
! Fit after  self-cal, rms=0.028403Jy  sigma=0.937334
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168695 Jy
! Component: 100  -  total flux cleaned = 0.000176114 Jy
! Component: 150  -  total flux cleaned = 0.000176249 Jy
! Component: 200  -  total flux cleaned = 0.000187838 Jy
! Total flux subtracted in 200 components = 0.000187838 Jy
! Clean residual min=-0.002154 max=0.002346 Jy/beam
! Clean residual mean=0.000002 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.022237 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 129 components and 0.022237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028404Jy  sigma=0.937186
! Fit after  self-cal, rms=0.028410Jy  sigma=0.936837
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.725 x 6.726 at 60.01 degrees (North through East)
! Clean map  min=-0.0021483  max=0.012979 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=5.075 mas, bpa=61.18 degrees
! Estimated noise=0.196947 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00970865 Jy
! Component: 100  -  total flux cleaned = 0.0130254 Jy
! Component: 150  -  total flux cleaned = 0.0152997 Jy
! Component: 200  -  total flux cleaned = 0.016893 Jy
! Total flux subtracted in 200 components = 0.016893 Jy
! Clean residual min=-0.001540 max=0.001346 Jy/beam
! Clean residual mean=0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.016893 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 56 model components to the UV plane model.
! The established model now contains 56 components and 0.016893 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.725 mas, bmaj=6.726 mas, bpa=60.01 degrees
! Estimated noise=0.0900325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263794 Jy
! Component: 100  -  total flux cleaned = 0.00388007 Jy
! Component: 150  -  total flux cleaned = 0.00451959 Jy
! Component: 200  -  total flux cleaned = 0.0048669 Jy
! Total flux subtracted in 200 components = 0.0048669 Jy
! Clean residual min=-0.002144 max=0.002371 Jy/beam
! Clean residual mean=0.000002 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.0217599 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 90 components and 0.0217599 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197348 Jy
! Component: 100  -  total flux cleaned = 0.000256423 Jy
! Component: 150  -  total flux cleaned = 0.000288239 Jy
! Component: 200  -  total flux cleaned = 0.000308877 Jy
! Total flux subtracted in 200 components = 0.000308877 Jy
! Clean residual min=-0.002144 max=0.002398 Jy/beam
! Clean residual mean=0.000002 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.0220688 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.0220688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028419Jy  sigma=0.936958
! Fit after  self-cal, rms=0.028428Jy  sigma=0.936854
wmodel J0804+470A_C_map.mod
! Writing 102 model components to file: J0804+470A_C_map.mod
wobs   J0804+470A_C_uvs.fits
! Writing UV FITS file: J0804+470A_C_uvs.fits
wwins  J0804+470A_C_map.win
! wwins: Wrote 1 windows to J0804+470A_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000515097 Jy
! Component: 100  -  total flux cleaned = 0.000550528 Jy
! Component: 150  -  total flux cleaned = 0.000485366 Jy
! Component: 200  -  total flux cleaned = 0.000631389 Jy
! Component: 250  -  total flux cleaned = 0.000795284 Jy
! Component: 300  -  total flux cleaned = 0.000950299 Jy
! Component: 350  -  total flux cleaned = 0.00109525 Jy
! Component: 400  -  total flux cleaned = 0.00123196 Jy
! Component: 450  -  total flux cleaned = 0.00138211 Jy
! Component: 500  -  total flux cleaned = 0.00160642 Jy
! Component: 550  -  total flux cleaned = 0.00180097 Jy
! Component: 600  -  total flux cleaned = 0.00202342 Jy
! Component: 650  -  total flux cleaned = 0.00216511 Jy
! Component: 700  -  total flux cleaned = 0.00226739 Jy
! Component: 750  -  total flux cleaned = 0.0023663 Jy
! Component: 800  -  total flux cleaned = 0.00244518 Jy
! Component: 850  -  total flux cleaned = 0.00250599 Jy
! Component: 900  -  total flux cleaned = 0.00259452 Jy
! Component: 950  -  total flux cleaned = 0.00262337 Jy
! Component: 1000  -  total flux cleaned = 0.002624 Jy
! Component: 1050  -  total flux cleaned = 0.00263719 Jy
! Component: 1100  -  total flux cleaned = 0.00263681 Jy
! Component: 1150  -  total flux cleaned = 0.00262397 Jy
! Component: 1200  -  total flux cleaned = 0.00261153 Jy
! Component: 1250  -  total flux cleaned = 0.00264736 Jy
! Component: 1300  -  total flux cleaned = 0.00263571 Jy
! Component: 1350  -  total flux cleaned = 0.00265848 Jy
! Component: 1400  -  total flux cleaned = 0.00269163 Jy
! Component: 1450  -  total flux cleaned = 0.00271283 Jy
! Component: 1500  -  total flux cleaned = 0.00270214 Jy
! Component: 1550  -  total flux cleaned = 0.00269227 Jy
! Component: 1600  -  total flux cleaned = 0.00272234 Jy
! Component: 1650  -  total flux cleaned = 0.00270278 Jy
! Component: 1700  -  total flux cleaned = 0.00271246 Jy
! Component: 1750  -  total flux cleaned = 0.00268456 Jy
! Component: 1800  -  total flux cleaned = 0.00268453 Jy
! Component: 1850  -  total flux cleaned = 0.00267535 Jy
! Component: 1900  -  total flux cleaned = 0.00264906 Jy
! Component: 1950  -  total flux cleaned = 0.00267486 Jy
! Component: 2000  -  total flux cleaned = 0.00268313 Jy
! Component: 2050  -  total flux cleaned = 0.00269136 Jy
! Component: 2100  -  total flux cleaned = 0.00269148 Jy
! Component: 2150  -  total flux cleaned = 0.00271571 Jy
! Component: 2200  -  total flux cleaned = 0.00277092 Jy
! Component: 2250  -  total flux cleaned = 0.00280951 Jy
! Component: 2300  -  total flux cleaned = 0.00284012 Jy
! Component: 2350  -  total flux cleaned = 0.00286287 Jy
! Component: 2400  -  total flux cleaned = 0.00290749 Jy
! Component: 2450  -  total flux cleaned = 0.00293684 Jy
! Component: 2500  -  total flux cleaned = 0.00295868 Jy
! Component: 2550  -  total flux cleaned = 0.00300164 Jy
! Component: 2600  -  total flux cleaned = 0.00304416 Jy
! Component: 2650  -  total flux cleaned = 0.00308607 Jy
! Component: 2700  -  total flux cleaned = 0.00311361 Jy
! Component: 2750  -  total flux cleaned = 0.00314089 Jy
! Component: 2800  -  total flux cleaned = 0.00317471 Jy
! Component: 2850  -  total flux cleaned = 0.00319478 Jy
! Component: 2900  -  total flux cleaned = 0.00323453 Jy
! Component: 2950  -  total flux cleaned = 0.00323462 Jy
! Component: 3000  -  total flux cleaned = 0.00326722 Jy
! Component: 3050  -  total flux cleaned = 0.00327372 Jy
! Component: 3100  -  total flux cleaned = 0.00329926 Jy
! Component: 3150  -  total flux cleaned = 0.00329297 Jy
! Component: 3200  -  total flux cleaned = 0.00328674 Jy
! Component: 3250  -  total flux cleaned = 0.00329299 Jy
! Component: 3300  -  total flux cleaned = 0.00330532 Jy
! Component: 3350  -  total flux cleaned = 0.00328699 Jy
! Component: 3400  -  total flux cleaned = 0.00328698 Jy
! Component: 3450  -  total flux cleaned = 0.0032809 Jy
! Component: 3500  -  total flux cleaned = 0.00326299 Jy
! Component: 3550  -  total flux cleaned = 0.00323927 Jy
! Component: 3600  -  total flux cleaned = 0.00323926 Jy
! Component: 3650  -  total flux cleaned = 0.00323336 Jy
! Component: 3700  -  total flux cleaned = 0.00321593 Jy
! Component: 3750  -  total flux cleaned = 0.00320442 Jy
! Component: 3800  -  total flux cleaned = 0.00319299 Jy
! Component: 3850  -  total flux cleaned = 0.00319296 Jy
! Component: 3900  -  total flux cleaned = 0.00316472 Jy
! Component: 3950  -  total flux cleaned = 0.00314797 Jy
! Component: 4000  -  total flux cleaned = 0.00314801 Jy
! Component: 4050  -  total flux cleaned = 0.0031314 Jy
! Total flux subtracted in 4096 components = 0.00312591 Jy
! Clean residual min=-0.000322 max=0.000289 Jy/beam
! Clean residual mean=0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0251947 Jy
keep
! Adding 812 model components to the UV plane model.
! The established model now contains 914 components and 0.0251947 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0804+470A_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.725 x 6.726 at 60.01 degrees (North through East)
! Clean map  min=-0.00091867  max=0.013138 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0804+470A_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0804+470A_C_a_map.mod
! Writing 914 model components to file: /vlbi/vcs9/uvm//J0804+470A_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0804+470A_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0804+470A_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0804+470A_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0804+470A_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0131384 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00012856 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.93552 2.93552 5.87104 11.7421 23.4841 46.9683 93.9366
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.013 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  102.196 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0804+470A_C_a_dfm.log closed on Tue Dec 26 21:58:00 2017