! Started logfile: /vlbi/vcs9/uvm//J0730-2620_C_a_dfm.log on Tue Dec 26 21:52:52 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J0730-2620_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0730-2620_C_a_uvm.fits ! AN table 1: 81 integrations on 36 of 36 possible baselines. ! AN table 2: 83 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.96716 visibilities/baseline/integration-bin. ! Found source: J0730-2620 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 36048 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J0730-2620_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0354329 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000528Jy sigma=22.806194 ! Fit after self-cal, rms=0.986531Jy sigma=22.502075 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.227 mas, bmaj=3.366 mas, bpa=-1.738 degrees ! Estimated noise=0.348812 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122624 Jy ! Component: 100 - total flux cleaned = 0.0140417 Jy ! Total flux subtracted in 100 components = 0.0140417 Jy ! Clean residual min=-0.001247 max=0.001286 Jy/beam ! Clean residual mean=-0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0140417 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0140417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032546Jy sigma=0.683675 ! Fit after self-cal, rms=0.032536Jy sigma=0.683417 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.748 mas, bmaj=4.69 mas, bpa=-4.601 degrees ! Estimated noise=0.163359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464476 Jy ! Component: 100 - total flux cleaned = -0.000501776 Jy ! Component: 150 - total flux cleaned = -0.000510074 Jy ! Component: 200 - total flux cleaned = -0.000525449 Jy ! Total flux subtracted in 200 components = -0.000525449 Jy ! Clean residual min=-0.000682 max=0.000727 Jy/beam ! Clean residual mean=-0.000004 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.0135163 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 12 components and 0.0135163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032533Jy sigma=0.683268 ! Fit after self-cal, rms=0.032533Jy sigma=0.683266 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999294 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 KP 1.00 LA 0.92 ! MK 1.08 NL 0.74 OV 0.91 PT 1.42 ! SC 1.09 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.09091 ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.86 KP 1.01 LA 0.86 ! MK 0.76 OV 0.87 PT 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.86 KP 1.07 LA 1.04 ! MK 0.90 NL 0.74 OV 1.15 PT 1.15 ! SC 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.07713 ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.77 KP 1.02 LA 0.85 ! MK 0.97 OV 0.93 PT 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.974805 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.13 KP 1.17 LA 0.96 ! MK 0.98 NL 0.78 OV 1.02 PT 1.10 ! SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00838 ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.95 KP 1.10 LA 1.06 ! MK 0.90 OV 0.97 PT 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972738 ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.97 KP 1.36 LA 0.83 ! MK 1.06 NL 0.94 OV 1.13 PT 0.90 ! SC 0.84 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01482 ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 KP 1.29 LA 0.87 ! MK 0.94 OV 0.91 PT 0.91 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.987613 ! Telescope amplitude corrections in sub-array 1: ! BR 0.46 FD 1.25 KP 1.08 LA 1.13 ! MK 0.94 NL 0.74 OV 1.26 PT 1.28 ! SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03696 ! Telescope amplitude corrections in sub-array 2: ! BR 0.53 FD 0.94 KP 1.33 LA 0.96 ! MK 1.11 OV 0.86 PT 1.02 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.947418 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 KP 1.17 LA 1.05 ! MK 1.07 NL 0.86 OV 1.18 PT 1.10 ! SC 1.09 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.957124 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 KP 1.42 LA 0.93 ! MK 1.03 OV 0.99 PT 0.94 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.908282 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.98 KP 0.97 LA 0.98 ! MK 1.07 NL 1.11 OV 1.17 PT 1.28 ! SC 1.18 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.915272 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 KP 1.40 LA 0.96 ! MK 1.29 OV 0.85 PT 1.25 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.937436 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.24 KP 1.20 LA 0.71 ! MK 1.02 NL 1.01 OV 1.13 PT 1.18 ! SC 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.997827 ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 1.07 KP 1.06 LA 0.87 ! MK 0.93 OV 1.09 PT 1.17 ! ! ! Fit before self-cal, rms=0.032533Jy sigma=0.683266 ! Fit after self-cal, rms=0.031506Jy sigma=0.680138 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031506Jy sigma=0.680138 ! Fit after self-cal, rms=0.031508Jy sigma=0.680123 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.754 mas, bmaj=4.638 mas, bpa=-4.736 degrees ! Estimated noise=0.153553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046505 Jy ! Component: 100 - total flux cleaned = -0.000500775 Jy ! Component: 150 - total flux cleaned = -0.000504515 Jy ! Component: 200 - total flux cleaned = -0.000507779 Jy ! Total flux subtracted in 200 components = -0.000507779 Jy ! Clean residual min=-0.000406 max=0.000425 Jy/beam ! Clean residual mean=-0.000002 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0130085 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0130085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031507Jy sigma=0.679990 ! Fit after self-cal, rms=0.031507Jy sigma=0.679989 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031507Jy sigma=0.679989 ! Fit after self-cal, rms=0.031472Jy sigma=0.678770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.7237e-05 Jy ! Component: 100 - total flux cleaned = 0.00010517 Jy ! Component: 150 - total flux cleaned = 0.000107511 Jy ! Component: 200 - total flux cleaned = 0.00010935 Jy ! Total flux subtracted in 200 components = 0.00010935 Jy ! Clean residual min=-0.000439 max=0.000445 Jy/beam ! Clean residual mean=-0.000003 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0131178 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0131178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031471Jy sigma=0.678760 ! Fit after self-cal, rms=0.031469Jy sigma=0.678635 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.754 x 4.638 at -4.736 degrees (North through East) ! Clean map min=-0.00042113 max=0.013471 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.232 mas, bmaj=3.349 mas, bpa=-2.048 degrees ! Estimated noise=0.325344 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114823 Jy ! Component: 100 - total flux cleaned = 0.0131795 Jy ! Component: 150 - total flux cleaned = 0.0133848 Jy ! Component: 200 - total flux cleaned = 0.0134511 Jy ! Total flux subtracted in 200 components = 0.0134511 Jy ! Clean residual min=-0.000993 max=0.000976 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0134511 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0134511 Jy ! Inverting map and beam ! Estimated beam: bmin=1.754 mas, bmaj=4.638 mas, bpa=-4.736 degrees ! Estimated noise=0.153553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110443 Jy ! Component: 100 - total flux cleaned = -0.000154056 Jy ! Component: 150 - total flux cleaned = -0.000181038 Jy ! Component: 200 - total flux cleaned = -0.000203385 Jy ! Total flux subtracted in 200 components = -0.000203385 Jy ! Clean residual min=-0.000464 max=0.000444 Jy/beam ! Clean residual mean=-0.000002 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0132477 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0132477 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.86365e-05 Jy ! Component: 100 - total flux cleaned = -3.43182e-05 Jy ! Component: 150 - total flux cleaned = -4.77414e-05 Jy ! Component: 200 - total flux cleaned = -5.92417e-05 Jy ! Total flux subtracted in 200 components = -5.92417e-05 Jy ! Clean residual min=-0.000451 max=0.000437 Jy/beam ! Clean residual mean=-0.000002 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0131884 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 24 components and 0.0131884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031469Jy sigma=0.678625 ! Fit after self-cal, rms=0.031470Jy sigma=0.678614 wmodel J0730-2620_C_map.mod ! Writing 24 model components to file: J0730-2620_C_map.mod wobs J0730-2620_C_uvs.fits ! Writing UV FITS file: J0730-2620_C_uvs.fits wwins J0730-2620_C_map.win ! wwins: Wrote 1 windows to J0730-2620_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.01783e-05 Jy ! Component: 100 - total flux cleaned = -0.000174633 Jy ! Component: 150 - total flux cleaned = -0.000234674 Jy ! Component: 200 - total flux cleaned = -0.000266881 Jy ! Component: 250 - total flux cleaned = -0.000279298 Jy ! Component: 300 - total flux cleaned = -0.000285401 Jy ! Component: 350 - total flux cleaned = -0.000302988 Jy ! Component: 400 - total flux cleaned = -0.000314351 Jy ! Component: 450 - total flux cleaned = -0.000325411 Jy ! Component: 500 - total flux cleaned = -0.000330866 Jy ! Component: 550 - total flux cleaned = -0.000336154 Jy ! Component: 600 - total flux cleaned = -0.000351648 Jy ! Component: 650 - total flux cleaned = -0.000356701 Jy ! Component: 700 - total flux cleaned = -0.000381412 Jy ! Component: 750 - total flux cleaned = -0.000391007 Jy ! Component: 800 - total flux cleaned = -0.000410093 Jy ! Component: 850 - total flux cleaned = -0.000419414 Jy ! Component: 900 - total flux cleaned = -0.000437746 Jy ! Component: 950 - total flux cleaned = -0.000442215 Jy ! Component: 1000 - total flux cleaned = -0.000464314 Jy ! Component: 1050 - total flux cleaned = -0.000477324 Jy ! Component: 1100 - total flux cleaned = -0.000477345 Jy ! Component: 1150 - total flux cleaned = -0.000502697 Jy ! Component: 1200 - total flux cleaned = -0.000506845 Jy ! Component: 1250 - total flux cleaned = -0.000519079 Jy ! Component: 1300 - total flux cleaned = -0.000515069 Jy ! Component: 1350 - total flux cleaned = -0.000542866 Jy ! Component: 1400 - total flux cleaned = -0.000570307 Jy ! Component: 1450 - total flux cleaned = -0.000581954 Jy ! Component: 1500 - total flux cleaned = -0.000601117 Jy ! Component: 1550 - total flux cleaned = -0.000619993 Jy ! Component: 1600 - total flux cleaned = -0.000623711 Jy ! Component: 1650 - total flux cleaned = -0.00064216 Jy ! Component: 1700 - total flux cleaned = -0.000660313 Jy ! Component: 1750 - total flux cleaned = -0.000663872 Jy ! Component: 1800 - total flux cleaned = -0.000667381 Jy ! Component: 1850 - total flux cleaned = -0.000674425 Jy ! Component: 1900 - total flux cleaned = -0.000677913 Jy ! Component: 1950 - total flux cleaned = -0.000688236 Jy ! Component: 2000 - total flux cleaned = -0.000705295 Jy ! Component: 2050 - total flux cleaned = -0.000701857 Jy ! Component: 2100 - total flux cleaned = -0.000705218 Jy ! Component: 2150 - total flux cleaned = -0.000721801 Jy ! Component: 2200 - total flux cleaned = -0.000728402 Jy ! Component: 2250 - total flux cleaned = -0.000747897 Jy ! Component: 2300 - total flux cleaned = -0.000747899 Jy ! Component: 2350 - total flux cleaned = -0.000763878 Jy ! Component: 2400 - total flux cleaned = -0.000763861 Jy ! Component: 2450 - total flux cleaned = -0.000770137 Jy ! Component: 2500 - total flux cleaned = -0.000782628 Jy ! Component: 2550 - total flux cleaned = -0.000788846 Jy ! Component: 2600 - total flux cleaned = -0.000801124 Jy ! Component: 2650 - total flux cleaned = -0.000810237 Jy ! Component: 2700 - total flux cleaned = -0.000816251 Jy ! Component: 2750 - total flux cleaned = -0.000825204 Jy ! Component: 2800 - total flux cleaned = -0.000828178 Jy ! Component: 2850 - total flux cleaned = -0.000842878 Jy ! Component: 2900 - total flux cleaned = -0.000837031 Jy ! Component: 2950 - total flux cleaned = -0.000837044 Jy ! Component: 3000 - total flux cleaned = -0.000845688 Jy ! Component: 3050 - total flux cleaned = -0.000842819 Jy ! Component: 3100 - total flux cleaned = -0.000848517 Jy ! Component: 3150 - total flux cleaned = -0.000859845 Jy ! Component: 3200 - total flux cleaned = -0.000865435 Jy ! Component: 3250 - total flux cleaned = -0.000879389 Jy ! Component: 3300 - total flux cleaned = -0.000873832 Jy ! Component: 3350 - total flux cleaned = -0.000884835 Jy ! Component: 3400 - total flux cleaned = -0.00089303 Jy ! Component: 3450 - total flux cleaned = -0.000890289 Jy ! Component: 3500 - total flux cleaned = -0.000898401 Jy ! Component: 3550 - total flux cleaned = -0.000906482 Jy ! Component: 3600 - total flux cleaned = -0.0009145 Jy ! Component: 3650 - total flux cleaned = -0.000919803 Jy ! Component: 3700 - total flux cleaned = -0.000927729 Jy ! Component: 3750 - total flux cleaned = -0.000930337 Jy ! Component: 3800 - total flux cleaned = -0.000935546 Jy ! Component: 3850 - total flux cleaned = -0.000930378 Jy ! Component: 3900 - total flux cleaned = -0.000938137 Jy ! Component: 3950 - total flux cleaned = -0.000953561 Jy ! Component: 4000 - total flux cleaned = -0.000951022 Jy ! Component: 4050 - total flux cleaned = -0.000966265 Jy ! Total flux subtracted in 4096 components = -0.000968793 Jy ! Clean residual min=-0.000134 max=0.000139 Jy/beam ! Clean residual mean=-0.000002 rms=0.000046 Jy/beam ! Combined flux in latest and established models = 0.0122196 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 289 components and 0.0122196 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0730-2620_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.754 x 4.638 at -4.736 degrees (North through East) ! Clean map min=-0.0003401 max=0.013498 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0730-2620_C_a_map.fits wmodel /vlbi/vcs9/uvm//J0730-2620_C_a_map.mod ! Writing 289 model components to file: /vlbi/vcs9/uvm//J0730-2620_C_a_map.mod wobs /vlbi/vcs9/uvm//J0730-2620_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0730-2620_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J0730-2620_C_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0730-2620_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0134983 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 4.61161e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02493 1.02493 2.04986 4.09972 8.19943 16.3989 32.7977 65.5955 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.013 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 292.703 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0730-2620_C_a_dfm.log closed on Tue Dec 26 21:52:55 2017