! Started logfile: /vlbi/vcs9/uvm//J0700+1709_X_a_dfm.log on Tue Dec 26 21:49:33 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J0700+1709_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0700+1709_X_a_uvm.fits
! AN table 1: 17 integrations on 28 of 28 possible baselines.
! AN table 2: 34 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.883754 visibilities/baseline/integration-bin.
! Found source: J0700+1709
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 10096 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J0700+1709_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.640294 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.152443Jy  sigma=26.876002
! Fit after  self-cal, rms=0.380346Jy  sigma=8.651250
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.9269 mas, bmaj=1.881 mas, bpa=11.68 degrees
! Estimated noise=0.514324 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.526621 Jy
! Component: 100  -  total flux cleaned = 0.640881 Jy
! Total flux subtracted in 100 components = 0.640881 Jy
! Clean residual min=-0.018410 max=0.032588 Jy/beam
! Clean residual mean=-0.000047 rms=0.004598 Jy/beam
! Combined flux in latest and established models = 0.640881 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.640881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071000Jy  sigma=1.698754
! Fit after  self-cal, rms=0.070920Jy  sigma=1.696775
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0423005 Jy
! Component: 100  -  total flux cleaned = 0.0598677 Jy
! Total flux subtracted in 100 components = 0.0598677 Jy
! Clean residual min=-0.015733 max=0.019917 Jy/beam
! Clean residual mean=-0.000044 rms=0.003255 Jy/beam
! Combined flux in latest and established models = 0.700749 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.700749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059136Jy  sigma=1.317314
! Fit after  self-cal, rms=0.059031Jy  sigma=1.315304
! Inverting map 
! Added new window around map position (1, -2.8).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116021 Jy
! Component: 100  -  total flux cleaned = 0.0126467 Jy
! Total flux subtracted in 100 components = 0.0126467 Jy
! Clean residual min=-0.014739 max=0.015745 Jy/beam
! Clean residual mean=-0.000037 rms=0.002763 Jy/beam
! Combined flux in latest and established models = 0.713396 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.713396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055426Jy  sigma=1.229824
! Fit after  self-cal, rms=0.054978Jy  sigma=1.214381
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.276 mas, bmaj=2.304 mas, bpa=9.663 degrees
! Estimated noise=0.301939 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00385387 Jy
! Component: 100  -  total flux cleaned = -0.00409109 Jy
! Component: 150  -  total flux cleaned = -0.00394848 Jy
! Component: 200  -  total flux cleaned = -0.0035308 Jy
! Total flux subtracted in 200 components = -0.0035308 Jy
! Clean residual min=-0.011900 max=0.012307 Jy/beam
! Clean residual mean=-0.000038 rms=0.003133 Jy/beam
! Combined flux in latest and established models = 0.709865 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.709865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053116Jy  sigma=1.182001
! Fit after  self-cal, rms=0.053044Jy  sigma=1.178812
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.0255
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.97     KP        0.96     LA        0.94     
!   MK        1.01     NL        0.98     PT        0.95     SC        0.99     
! 
!  Amplitude normalization factor in sub-array 2: 0.998866
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.00     HN        0.98     KP        1.02     
!   LA        1.01     NL        0.97     OV        1.07     SC        0.98     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.02531
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.97     KP        0.96     LA        0.95     
!   MK        1.01     NL        0.96     PT        0.95     SC        0.99     
! 
!  Amplitude normalization factor in sub-array 2: 0.994499
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.99     HN        0.99     KP        1.03     
!   LA        1.01     NL        0.97     OV        1.08     SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.02509
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.97     KP        0.96     LA        0.95     
!   MK        1.02     NL        0.96     PT        0.97     SC        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 0.994713
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.99     HN        0.99     KP        1.03     
!   LA        1.01     NL        0.98     OV        1.08     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.01607
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        0.95     LA        0.95     
!   MK        1.03     NL        0.97     PT        0.95     SC        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 0.988942
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.04     
!   LA        1.02     NL        0.99     OV        1.08     SC        0.99     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.00895
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        0.99     KP        0.97     LA        0.96     
!   MK        1.02     NL        0.98     PT        0.95     SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.979286
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     HN        1.02     KP        1.05     
!   LA        1.03     NL        1.00     OV        1.06     SC        0.99     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.00862
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        0.98     KP        0.97     LA        0.97     
!   MK        1.03     NL        0.97     PT        0.95     SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.972822
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.06     
!   LA        1.03     NL        1.01     OV        1.09     SC        1.01     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.00651
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00     KP        0.97     LA        0.95     
!   MK        1.05     NL        0.98     PT        0.94     SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.966174
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        1.02     KP        1.08     
!   LA        1.03     NL        1.00     OV        1.11     SC        1.00     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 1.00372
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.99     KP        0.97     LA        0.96     
!   MK        1.05     NL        0.98     PT        0.95     SC        1.04     
! 
!  Amplitude normalization factor in sub-array 2: 0.974467
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     HN        1.02     KP        1.06     
!   LA        1.03     NL        1.01     OV        1.06     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.053044Jy  sigma=1.178812
! Fit after  self-cal, rms=0.045670Jy  sigma=1.007114
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045670Jy  sigma=1.007114
! Fit after  self-cal, rms=0.045680Jy  sigma=1.007088
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.301 mas, bmaj=2.287 mas, bpa=9.841 degrees
! Estimated noise=0.300906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0041056 Jy
! Component: 100  -  total flux cleaned = -0.00412129 Jy
! Component: 150  -  total flux cleaned = -0.00398444 Jy
! Component: 200  -  total flux cleaned = -0.00397782 Jy
! Total flux subtracted in 200 components = -0.00397782 Jy
! Clean residual min=-0.009022 max=0.010404 Jy/beam
! Clean residual mean=-0.000016 rms=0.002389 Jy/beam
! Combined flux in latest and established models = 0.705887 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.705887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044612Jy  sigma=0.985164
! Fit after  self-cal, rms=0.044522Jy  sigma=0.984097
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044522Jy  sigma=0.984097
! Fit after  self-cal, rms=0.044511Jy  sigma=0.983861
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00059733 Jy
! Component: 100  -  total flux cleaned = -0.000506812 Jy
! Component: 150  -  total flux cleaned = -0.000506634 Jy
! Component: 200  -  total flux cleaned = -0.000432315 Jy
! Total flux subtracted in 200 components = -0.000432315 Jy
! Clean residual min=-0.009026 max=0.010282 Jy/beam
! Clean residual mean=-0.000016 rms=0.002354 Jy/beam
! Combined flux in latest and established models = 0.705455 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.705455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044263Jy  sigma=0.976971
! Fit after  self-cal, rms=0.044197Jy  sigma=0.976224
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.301 x 2.287 at 9.841 degrees (North through East)
! Clean map  min=-0.0087048  max=0.62881 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044197Jy  sigma=0.976224
! Fit after  self-cal, rms=0.037753Jy  sigma=0.806492
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037753Jy  sigma=0.806492
! Fit after  self-cal, rms=0.037753Jy  sigma=0.806488
! Inverting map and beam 
! Estimated beam: bmin=1.282 mas, bmaj=2.296 mas, bpa=9.272 degrees
! Estimated noise=0.300444 mJy/beam.
! Added new window around map position (-1.8, -1.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00808519 Jy
! Component: 100  -  total flux cleaned = 0.00949151 Jy
! Component: 150  -  total flux cleaned = 0.0100082 Jy
! Component: 200  -  total flux cleaned = 0.0104291 Jy
! Total flux subtracted in 200 components = 0.0104291 Jy
! Clean residual min=-0.004698 max=0.006215 Jy/beam
! Clean residual mean=-0.000004 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.715884 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 80 components and 0.715884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035152Jy  sigma=0.744884
! Fit after  self-cal, rms=0.035034Jy  sigma=0.741634
! Inverting map 
! Added new window around map position (-2.8, -11).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00709666 Jy
! Component: 100  -  total flux cleaned = 0.010906 Jy
! Component: 150  -  total flux cleaned = 0.013418 Jy
! Component: 200  -  total flux cleaned = 0.0154182 Jy
! Total flux subtracted in 200 components = 0.0154182 Jy
! Clean residual min=-0.003452 max=0.003308 Jy/beam
! Clean residual mean=-0.000002 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.731302 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 115 components and 0.731302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033623Jy  sigma=0.708094
! Fit after  self-cal, rms=0.033555Jy  sigma=0.706773
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9332 mas, bmaj=1.878 mas, bpa=11.61 degrees
! Estimated noise=0.510524 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.52221 Jy
! Component: 100  -  total flux cleaned = 0.634521 Jy
! Component: 150  -  total flux cleaned = 0.677535 Jy
! Component: 200  -  total flux cleaned = 0.696175 Jy
! Total flux subtracted in 200 components = 0.696175 Jy
! Clean residual min=-0.008849 max=0.010503 Jy/beam
! Clean residual mean=-0.000009 rms=0.001973 Jy/beam
! Combined flux in latest and established models = 0.696175 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.696175 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.282 mas, bmaj=2.296 mas, bpa=9.272 degrees
! Estimated noise=0.300444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122057 Jy
! Component: 100  -  total flux cleaned = 0.0185089 Jy
! Component: 150  -  total flux cleaned = 0.0237787 Jy
! Component: 200  -  total flux cleaned = 0.0286332 Jy
! Total flux subtracted in 200 components = 0.0286332 Jy
! Clean residual min=-0.004809 max=0.004563 Jy/beam
! Clean residual mean=-0.000005 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.724808 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 45 components and 0.724808 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407239 Jy
! Component: 100  -  total flux cleaned = 0.00601881 Jy
! Component: 150  -  total flux cleaned = 0.0074474 Jy
! Component: 200  -  total flux cleaned = 0.0088804 Jy
! Total flux subtracted in 200 components = 0.0088804 Jy
! Clean residual min=-0.003586 max=0.003484 Jy/beam
! Clean residual mean=-0.000003 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.733688 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 65 components and 0.733689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034344Jy  sigma=0.723958
! Fit after  self-cal, rms=0.034232Jy  sigma=0.721990
wmodel J0700+1709_X_map.mod
! Writing 65 model components to file: J0700+1709_X_map.mod
wobs   J0700+1709_X_uvs.fits
! Writing UV FITS file: J0700+1709_X_uvs.fits
wwins  J0700+1709_X_map.win
! wwins: Wrote 4 windows to J0700+1709_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.92573e-07 Jy
! Component: 100  -  total flux cleaned = 6.36613e-05 Jy
! Component: 150  -  total flux cleaned = -4.99455e-05 Jy
! Component: 200  -  total flux cleaned = -5.18395e-05 Jy
! Component: 250  -  total flux cleaned = -0.000154926 Jy
! Component: 300  -  total flux cleaned = -0.000250935 Jy
! Component: 350  -  total flux cleaned = -0.000250701 Jy
! Component: 400  -  total flux cleaned = -0.000427244 Jy
! Component: 450  -  total flux cleaned = -0.000470575 Jy
! Component: 500  -  total flux cleaned = -0.00046965 Jy
! Component: 550  -  total flux cleaned = -0.000468804 Jy
! Component: 600  -  total flux cleaned = -0.000467839 Jy
! Component: 650  -  total flux cleaned = -0.000394895 Jy
! Component: 700  -  total flux cleaned = -0.000394517 Jy
! Component: 750  -  total flux cleaned = -0.00029071 Jy
! Component: 800  -  total flux cleaned = -0.000189599 Jy
! Component: 850  -  total flux cleaned = -0.000125135 Jy
! Component: 900  -  total flux cleaned = -9.35771e-05 Jy
! Component: 950  -  total flux cleaned = -6.17483e-05 Jy
! Component: 1000  -  total flux cleaned = 7.15763e-08 Jy
! Component: 1050  -  total flux cleaned = 2.93015e-05 Jy
! Component: 1100  -  total flux cleaned = -2.80005e-05 Jy
! Component: 1150  -  total flux cleaned = 8.78095e-07 Jy
! Component: 1200  -  total flux cleaned = 6.87457e-07 Jy
! Component: 1250  -  total flux cleaned = -2.63259e-05 Jy
! Component: 1300  -  total flux cleaned = -2.65789e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000154802 Jy
! Component: 1400  -  total flux cleaned = -0.000178903 Jy
! Component: 1450  -  total flux cleaned = -0.000251869 Jy
! Component: 1500  -  total flux cleaned = -0.000131856 Jy
! Component: 1550  -  total flux cleaned = -0.00013207 Jy
! Component: 1600  -  total flux cleaned = -6.29837e-05 Jy
! Component: 1650  -  total flux cleaned = -6.29051e-05 Jy
! Component: 1700  -  total flux cleaned = -6.23419e-05 Jy
! Component: 1750  -  total flux cleaned = -1.85548e-05 Jy
! Component: 1800  -  total flux cleaned = -4.02199e-05 Jy
! Component: 1850  -  total flux cleaned = -8.26617e-05 Jy
! Component: 1900  -  total flux cleaned = -0.000165384 Jy
! Component: 1950  -  total flux cleaned = -0.000165229 Jy
! Component: 2000  -  total flux cleaned = -0.000265429 Jy
! Component: 2050  -  total flux cleaned = -0.000246186 Jy
! Component: 2100  -  total flux cleaned = -0.000285017 Jy
! Component: 2150  -  total flux cleaned = -0.000323197 Jy
! Component: 2200  -  total flux cleaned = -0.000398013 Jy
! Component: 2250  -  total flux cleaned = -0.000379664 Jy
! Component: 2300  -  total flux cleaned = -0.000434036 Jy
! Component: 2350  -  total flux cleaned = -0.000398188 Jy
! Component: 2400  -  total flux cleaned = -0.000415949 Jy
! Component: 2450  -  total flux cleaned = -0.000450863 Jy
! Component: 2500  -  total flux cleaned = -0.000450919 Jy
! Component: 2550  -  total flux cleaned = -0.000434019 Jy
! Component: 2600  -  total flux cleaned = -0.000467108 Jy
! Component: 2650  -  total flux cleaned = -0.000417902 Jy
! Component: 2700  -  total flux cleaned = -0.000433985 Jy
! Component: 2750  -  total flux cleaned = -0.000417994 Jy
! Component: 2800  -  total flux cleaned = -0.000449446 Jy
! Component: 2850  -  total flux cleaned = -0.000371685 Jy
! Component: 2900  -  total flux cleaned = -0.00038716 Jy
! Component: 2950  -  total flux cleaned = -0.000387183 Jy
! Component: 3000  -  total flux cleaned = -0.000372471 Jy
! Component: 3050  -  total flux cleaned = -0.000372555 Jy
! Component: 3100  -  total flux cleaned = -0.000328561 Jy
! Component: 3150  -  total flux cleaned = -0.000227544 Jy
! Component: 3200  -  total flux cleaned = -0.000227525 Jy
! Component: 3250  -  total flux cleaned = -0.000199146 Jy
! Component: 3300  -  total flux cleaned = -0.000129289 Jy
! Component: 3350  -  total flux cleaned = -0.00014307 Jy
! Component: 3400  -  total flux cleaned = -0.000129328 Jy
! Component: 3450  -  total flux cleaned = -0.00010236 Jy
! Component: 3500  -  total flux cleaned = -0.000115808 Jy
! Component: 3550  -  total flux cleaned = -8.92319e-05 Jy
! Component: 3600  -  total flux cleaned = -7.61486e-05 Jy
! Component: 3650  -  total flux cleaned = -6.31172e-05 Jy
! Component: 3700  -  total flux cleaned = -5.00958e-05 Jy
! Component: 3750  -  total flux cleaned = 1.34821e-05 Jy
! Component: 3800  -  total flux cleaned = 3.86732e-05 Jy
! Component: 3850  -  total flux cleaned = 0.000101115 Jy
! Component: 3900  -  total flux cleaned = 0.000113574 Jy
! Component: 3950  -  total flux cleaned = 0.000162376 Jy
! Component: 4000  -  total flux cleaned = 0.000174635 Jy
! Component: 4050  -  total flux cleaned = 0.000246899 Jy
! Total flux subtracted in 4096 components = 0.000270636 Jy
! Clean residual min=-0.000647 max=0.000781 Jy/beam
! Clean residual mean=0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.733959 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 323 components and 0.73396 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0700+1709_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.282 x 2.296 at 9.272 degrees (North through East)
! Clean map  min=-0.005659  max=0.62817 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0700+1709_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J0700+1709_X_a_map.mod
! Writing 323 model components to file: /vlbi/vcs9/uvm//J0700+1709_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J0700+1709_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0700+1709_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0700+1709_X_a_map.win
! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J0700+1709_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.628167 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000197691 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0944135 0.0944135 0.188827 0.377654 0.755308 1.51062 3.02123 6.04246 12.0849 24.1698 48.3397 96.6794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.628 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3177.51 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0700+1709_X_a_dfm.log closed on Tue Dec 26 21:49:36 2017