! Started logfile: /vlbi/vcs9/uvm//J0635-262B_X_b_dfm.log on Tue Dec 26 21:47:25 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0635-262B_X_b_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0635-262B_X_b_uvm.fits ! AN table 1: 166 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.756627 visibilities/baseline/integration-bin. ! Found source: J0635-262B ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 45216 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0635-262B_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0850306 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003459Jy sigma=19.804657 ! Fit after self-cal, rms=0.938874Jy sigma=18.404545 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.6802 mas, bmaj=1.861 mas, bpa=-2.524 degrees ! Estimated noise=0.38974 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493359 Jy ! Component: 100 - total flux cleaned = 0.0678698 Jy ! Total flux subtracted in 100 components = 0.0678698 Jy ! Clean residual min=-0.004388 max=0.007332 Jy/beam ! Clean residual mean=0.000009 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.0678698 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0678698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.051297Jy sigma=0.942053 ! Fit after self-cal, rms=0.051282Jy sigma=0.941725 ! Inverting map ! Added new window around map position (0.2, -2.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112273 Jy ! Component: 100 - total flux cleaned = 0.0180436 Jy ! Total flux subtracted in 100 components = 0.0180436 Jy ! Clean residual min=-0.003370 max=0.005048 Jy/beam ! Clean residual mean=0.000004 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0859135 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.0859135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048167Jy sigma=0.848993 ! Fit after self-cal, rms=0.048144Jy sigma=0.848427 ! Inverting map ! Added new window around map position (1, 1.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601225 Jy ! Component: 100 - total flux cleaned = 0.00966647 Jy ! Total flux subtracted in 100 components = 0.00966647 Jy ! Clean residual min=-0.003016 max=0.003736 Jy/beam ! Clean residual mean=0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0955799 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.0955799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047306Jy sigma=0.822872 ! Fit after self-cal, rms=0.047248Jy sigma=0.821227 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9522 mas, bmaj=2.474 mas, bpa=-1.943 degrees ! Estimated noise=0.168714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681676 Jy ! Component: 100 - total flux cleaned = 0.0103312 Jy ! Component: 150 - total flux cleaned = 0.0123518 Jy ! Component: 200 - total flux cleaned = 0.0135744 Jy ! Total flux subtracted in 200 components = 0.0135744 Jy ! Clean residual min=-0.001743 max=0.001964 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.109154 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 96 components and 0.109154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046662Jy sigma=0.805422 ! Fit after self-cal, rms=0.046645Jy sigma=0.805130 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.995229 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.16 KP 1.01 ! LA 0.96 MK 0.98 NL 1.01 OV 1.03 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99512 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.12 KP 1.00 ! LA 1.00 MK 0.98 NL 1.00 OV 1.02 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990774 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.17 KP 1.02 ! LA 0.97 MK 0.97 NL 1.01 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00168 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.12 KP 1.00 ! LA 0.97 MK 0.98 NL 1.01 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.964466 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.14 KP 1.02 ! LA 0.97 MK 1.03 NL 1.00 OV 1.03 ! PT 1.01 SC 1.19 ! ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.960165 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.23 KP 1.01 ! LA 0.98 MK 1.05 NL 1.02 OV 1.01 ! PT 1.00 SC 1.14 ! ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.957997 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.29 KP 1.02 ! LA 0.98 MK 1.09 NL 1.01 OV 1.03 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.96065 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.19 KP 1.02 ! LA 1.00 MK 1.11 NL 0.98 OV 1.03 ! PT 0.98 SC 1.09 ! ! ! Fit before self-cal, rms=0.046645Jy sigma=0.805130 ! Fit after self-cal, rms=0.048493Jy sigma=0.807371 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048493Jy sigma=0.807371 ! Fit after self-cal, rms=0.048495Jy sigma=0.807363 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9793 mas, bmaj=2.518 mas, bpa=-2.205 degrees ! Estimated noise=0.163596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320509 Jy ! Component: 100 - total flux cleaned = -0.00427681 Jy ! Component: 150 - total flux cleaned = -0.00461107 Jy ! Component: 200 - total flux cleaned = -0.00481303 Jy ! Total flux subtracted in 200 components = -0.00481303 Jy ! Clean residual min=-0.001407 max=0.001621 Jy/beam ! Clean residual mean=0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.104341 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.104341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048314Jy sigma=0.803735 ! Fit after self-cal, rms=0.048307Jy sigma=0.803647 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048307Jy sigma=0.803647 ! Fit after self-cal, rms=0.048280Jy sigma=0.803020 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.31239e-05 Jy ! Component: 100 - total flux cleaned = -9.11376e-05 Jy ! Component: 150 - total flux cleaned = -0.000107675 Jy ! Component: 200 - total flux cleaned = -0.000123134 Jy ! Total flux subtracted in 200 components = -0.000123134 Jy ! Clean residual min=-0.001377 max=0.001678 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.104218 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.104218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048257Jy sigma=0.802753 ! Fit after self-cal, rms=0.048252Jy sigma=0.802662 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9793 x 2.518 at -2.205 degrees (North through East) ! Clean map min=-0.0012969 max=0.054635 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6843 mas, bmaj=1.863 mas, bpa=-2.44 degrees ! Estimated noise=0.376316 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484745 Jy ! Component: 100 - total flux cleaned = 0.0670476 Jy ! Component: 150 - total flux cleaned = 0.078026 Jy ! Component: 200 - total flux cleaned = 0.0850746 Jy ! Total flux subtracted in 200 components = 0.0850746 Jy ! Clean residual min=-0.003330 max=0.003859 Jy/beam ! Clean residual mean=0.000004 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.0850746 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.0850746 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9793 mas, bmaj=2.518 mas, bpa=-2.205 degrees ! Estimated noise=0.163596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925359 Jy ! Component: 100 - total flux cleaned = 0.013813 Jy ! Component: 150 - total flux cleaned = 0.0163027 Jy ! Component: 200 - total flux cleaned = 0.0177471 Jy ! Total flux subtracted in 200 components = 0.0177471 Jy ! Clean residual min=-0.001490 max=0.001694 Jy/beam ! Clean residual mean=0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.102822 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 103 components and 0.102822 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857152 Jy ! Component: 100 - total flux cleaned = 0.00116229 Jy ! Component: 150 - total flux cleaned = 0.00124131 Jy ! Component: 200 - total flux cleaned = 0.00127777 Jy ! Total flux subtracted in 200 components = 0.00127777 Jy ! Clean residual min=-0.001428 max=0.001599 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.1041 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.1041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048284Jy sigma=0.803014 ! Fit after self-cal, rms=0.048276Jy sigma=0.802955 wmodel J0635-262B_X_map.mod ! Writing 116 model components to file: J0635-262B_X_map.mod wobs J0635-262B_X_uvs.fits ! Writing UV FITS file: J0635-262B_X_uvs.fits wwins J0635-262B_X_map.win ! wwins: Wrote 4 windows to J0635-262B_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649005 Jy ! Component: 100 - total flux cleaned = 0.000932613 Jy ! Component: 150 - total flux cleaned = 0.00129755 Jy ! Component: 200 - total flux cleaned = 0.00162234 Jy ! Component: 250 - total flux cleaned = 0.00189026 Jy ! Component: 300 - total flux cleaned = 0.00212727 Jy ! Component: 350 - total flux cleaned = 0.00229444 Jy ! Component: 400 - total flux cleaned = 0.00239614 Jy ! Component: 450 - total flux cleaned = 0.00243621 Jy ! Component: 500 - total flux cleaned = 0.00253349 Jy ! Component: 550 - total flux cleaned = 0.00253374 Jy ! Component: 600 - total flux cleaned = 0.00264528 Jy ! Component: 650 - total flux cleaned = 0.00269943 Jy ! Component: 700 - total flux cleaned = 0.00275273 Jy ! Component: 750 - total flux cleaned = 0.00280526 Jy ! Component: 800 - total flux cleaned = 0.00287383 Jy ! Component: 850 - total flux cleaned = 0.00287383 Jy ! Component: 900 - total flux cleaned = 0.00287365 Jy ! Component: 950 - total flux cleaned = 0.00284108 Jy ! Component: 1000 - total flux cleaned = 0.00282504 Jy ! Component: 1050 - total flux cleaned = 0.00279375 Jy ! Component: 1100 - total flux cleaned = 0.00280903 Jy ! Component: 1150 - total flux cleaned = 0.00276336 Jy ! Component: 1200 - total flux cleaned = 0.00277876 Jy ! Component: 1250 - total flux cleaned = 0.00277869 Jy ! Component: 1300 - total flux cleaned = 0.00273479 Jy ! Component: 1350 - total flux cleaned = 0.00273475 Jy ! Component: 1400 - total flux cleaned = 0.00269205 Jy ! Component: 1450 - total flux cleaned = 0.00264966 Jy ! Component: 1500 - total flux cleaned = 0.00263582 Jy ! Component: 1550 - total flux cleaned = 0.00260797 Jy ! Component: 1600 - total flux cleaned = 0.00256702 Jy ! Component: 1650 - total flux cleaned = 0.00252683 Jy ! Component: 1700 - total flux cleaned = 0.00252687 Jy ! Component: 1750 - total flux cleaned = 0.00246109 Jy ! Component: 1800 - total flux cleaned = 0.00240902 Jy ! Component: 1850 - total flux cleaned = 0.0023833 Jy ! Component: 1900 - total flux cleaned = 0.00233221 Jy ! Component: 1950 - total flux cleaned = 0.00229436 Jy ! Component: 2000 - total flux cleaned = 0.00223185 Jy ! Component: 2050 - total flux cleaned = 0.00220733 Jy ! Component: 2100 - total flux cleaned = 0.00215835 Jy ! Component: 2150 - total flux cleaned = 0.00212203 Jy ! Component: 2200 - total flux cleaned = 0.00211008 Jy ! Component: 2250 - total flux cleaned = 0.00209802 Jy ! Component: 2300 - total flux cleaned = 0.00206266 Jy ! Component: 2350 - total flux cleaned = 0.0020158 Jy ! Component: 2400 - total flux cleaned = 0.00194619 Jy ! Component: 2450 - total flux cleaned = 0.00195775 Jy ! Component: 2500 - total flux cleaned = 0.00192337 Jy ! Component: 2550 - total flux cleaned = 0.00186697 Jy ! Component: 2600 - total flux cleaned = 0.00183343 Jy ! Component: 2650 - total flux cleaned = 0.00180009 Jy ! Component: 2700 - total flux cleaned = 0.00178925 Jy ! Component: 2750 - total flux cleaned = 0.0017782 Jy ! Component: 2800 - total flux cleaned = 0.00174573 Jy ! Component: 2850 - total flux cleaned = 0.00170302 Jy ! Component: 2900 - total flux cleaned = 0.00172432 Jy ! Component: 2950 - total flux cleaned = 0.00169272 Jy ! Component: 3000 - total flux cleaned = 0.00167181 Jy ! Component: 3050 - total flux cleaned = 0.00168224 Jy ! Component: 3100 - total flux cleaned = 0.00168242 Jy ! Component: 3150 - total flux cleaned = 0.00169263 Jy ! Component: 3200 - total flux cleaned = 0.00166211 Jy ! Component: 3250 - total flux cleaned = 0.00167225 Jy ! Component: 3300 - total flux cleaned = 0.00166229 Jy ! Component: 3350 - total flux cleaned = 0.00168214 Jy ! Component: 3400 - total flux cleaned = 0.00167224 Jy ! Component: 3450 - total flux cleaned = 0.00167228 Jy ! Component: 3500 - total flux cleaned = 0.00167235 Jy ! Component: 3550 - total flux cleaned = 0.00169163 Jy ! Component: 3600 - total flux cleaned = 0.00170124 Jy ! Component: 3650 - total flux cleaned = 0.00169172 Jy ! Component: 3700 - total flux cleaned = 0.00170125 Jy ! Component: 3750 - total flux cleaned = 0.00170123 Jy ! Component: 3800 - total flux cleaned = 0.00173863 Jy ! Component: 3850 - total flux cleaned = 0.00171082 Jy ! Component: 3900 - total flux cleaned = 0.0017569 Jy ! Component: 3950 - total flux cleaned = 0.0017752 Jy ! Component: 4000 - total flux cleaned = 0.00176617 Jy ! Component: 4050 - total flux cleaned = 0.00181133 Jy ! Total flux subtracted in 4096 components = 0.00183822 Jy ! Clean residual min=-0.000449 max=0.000525 Jy/beam ! Clean residual mean=0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.105938 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 414 components and 0.105938 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0635-262B_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9793 x 2.518 at -2.205 degrees (North through East) ! Clean map min=-0.0011906 max=0.055556 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0635-262B_X_b_map.fits wmodel /vlbi/vcs9/uvm//J0635-262B_X_b_map.mod ! Writing 414 model components to file: /vlbi/vcs9/uvm//J0635-262B_X_b_map.mod wobs /vlbi/vcs9/uvm//J0635-262B_X_b_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0635-262B_X_b_uvs.fits wwins /vlbi/vcs9/uvm//J0635-262B_X_b_map.win ! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J0635-262B_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0555556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159832 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.863094 0.863094 1.72619 3.45238 6.90475 13.8095 27.619 55.238 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 347.586 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0635-262B_X_b_dfm.log closed on Tue Dec 26 21:47:30 2017