! Started logfile: /vlbi/vcs9/uvm//J0635-262B_C_b_dfm.log on Tue Dec 26 21:47:19 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0635-262B_C_b_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0635-262B_C_b_uvm.fits
! AN table 1: 166 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.756627 visibilities/baseline/integration-bin.
! Found source: J0635-262B
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 45216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0635-262B_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0984099 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004729Jy  sigma=22.590735
! Fit after  self-cal, rms=0.917553Jy  sigma=20.500501
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.188 mas, bmaj=3.286 mas, bpa=-1.896 degrees
! Estimated noise=0.326452 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628424 Jy
! Component: 100  -  total flux cleaned = 0.0826579 Jy
! Total flux subtracted in 100 components = 0.0826579 Jy
! Clean residual min=-0.004888 max=0.007471 Jy/beam
! Clean residual mean=-0.000018 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.0826579 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0826579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048111Jy  sigma=1.006213
! Fit after  self-cal, rms=0.048113Jy  sigma=1.005934
! Inverting map 
! Added new window around map position (1.5, 4.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110633 Jy
! Component: 100  -  total flux cleaned = 0.0177575 Jy
! Total flux subtracted in 100 components = 0.0177575 Jy
! Clean residual min=-0.004055 max=0.005194 Jy/beam
! Clean residual mean=-0.000011 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.100415 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.100415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044551Jy  sigma=0.886579
! Fit after  self-cal, rms=0.044521Jy  sigma=0.884934
! Inverting map 
! Added new window around map position (18, -36.9).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621499 Jy
! Component: 100  -  total flux cleaned = 0.00986824 Jy
! Total flux subtracted in 100 components = 0.00986824 Jy
! Clean residual min=-0.003460 max=0.003762 Jy/beam
! Clean residual mean=-0.000008 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.110284 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.110284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043501Jy  sigma=0.850752
! Fit after  self-cal, rms=0.043423Jy  sigma=0.848299
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.677 mas, bmaj=4.365 mas, bpa=0.3768 degrees
! Estimated noise=0.148144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00703652 Jy
! Component: 100  -  total flux cleaned = 0.010091 Jy
! Component: 150  -  total flux cleaned = 0.011321 Jy
! Component: 200  -  total flux cleaned = 0.0114004 Jy
! Total flux subtracted in 200 components = 0.0114004 Jy
! Clean residual min=-0.002058 max=0.002904 Jy/beam
! Clean residual mean=-0.000008 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.121684 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 61 components and 0.121684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043042Jy  sigma=0.828582
! Fit after  self-cal, rms=0.043042Jy  sigma=0.828314
! Inverting map 
! Added new window around map position (6.9, 3.3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335333 Jy
! Component: 100  -  total flux cleaned = 0.00444795 Jy
! Component: 150  -  total flux cleaned = 0.0046854 Jy
! Component: 200  -  total flux cleaned = 0.00477124 Jy
! Total flux subtracted in 200 components = 0.00477124 Jy
! Clean residual min=-0.001774 max=0.002423 Jy/beam
! Clean residual mean=-0.000005 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.126455 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.126455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042828Jy  sigma=0.823109
! Fit after  self-cal, rms=0.042816Jy  sigma=0.822572
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01637
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.16     KP        0.96     
!   LA        0.96     MK        0.93     NL        1.02     OV        0.96     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00322
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.17     KP        0.96     
!   LA        0.98     MK        0.96     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.987502
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.20     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.03     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00181
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.16     KP        1.01     
!   LA        1.00     MK        0.95     NL        0.95     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.964786
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.98     HN        1.19     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.03     OV        1.00     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.967161
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.26     KP        1.01     
!   LA        0.99     MK        1.05     NL        1.05     OV        0.98     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.967133
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.22     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.05     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.959754
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.19     KP        1.01     
!   LA        1.00     MK        1.08     NL        1.05     OV        1.00     
!   PT        1.01     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.042816Jy  sigma=0.822572
! Fit after  self-cal, rms=0.044909Jy  sigma=0.821769
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044909Jy  sigma=0.821769
! Fit after  self-cal, rms=0.044915Jy  sigma=0.821755
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.683 mas, bmaj=4.358 mas, bpa=0.8687 degrees
! Estimated noise=0.142953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0035386 Jy
! Component: 100  -  total flux cleaned = -0.00419205 Jy
! Component: 150  -  total flux cleaned = -0.00423351 Jy
! Component: 200  -  total flux cleaned = -0.00430655 Jy
! Total flux subtracted in 200 components = -0.00430655 Jy
! Clean residual min=-0.001565 max=0.001867 Jy/beam
! Clean residual mean=0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.122149 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.122149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044714Jy  sigma=0.815727
! Fit after  self-cal, rms=0.044699Jy  sigma=0.815536
! Inverting map 
! Added new window around map position (-23.1, 36.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000998493 Jy
! Component: 100  -  total flux cleaned = 0.000857423 Jy
! Component: 150  -  total flux cleaned = 0.000856294 Jy
! Component: 200  -  total flux cleaned = 0.000857332 Jy
! Total flux subtracted in 200 components = 0.000857332 Jy
! Clean residual min=-0.001408 max=0.001358 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.123006 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 115 components and 0.123006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044606Jy  sigma=0.813237
! Fit after  self-cal, rms=0.044595Jy  sigma=0.813130
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044595Jy  sigma=0.813130
! Fit after  self-cal, rms=0.044591Jy  sigma=0.812674
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -5.59131e-05 Jy
! Component: 100  -  total flux cleaned = -5.61823e-05 Jy
! Component: 150  -  total flux cleaned = -5.73039e-05 Jy
! Component: 200  -  total flux cleaned = -5.72618e-05 Jy
! Total flux subtracted in 200 components = -5.72618e-05 Jy
! Clean residual min=-0.001387 max=0.001354 Jy/beam
! Clean residual mean=0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.122949 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 122 components and 0.122949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044549Jy  sigma=0.811804
! Fit after  self-cal, rms=0.044548Jy  sigma=0.811737
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.683 x 4.358 at 0.8687 degrees (North through East)
! Clean map  min=-0.0012989  max=0.076506 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=3.264 mas, bpa=-1.628 degrees
! Estimated noise=0.31606 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0615559 Jy
! Component: 100  -  total flux cleaned = 0.081557 Jy
! Component: 150  -  total flux cleaned = 0.0930518 Jy
! Component: 200  -  total flux cleaned = 0.100366 Jy
! Total flux subtracted in 200 components = 0.100366 Jy
! Clean residual min=-0.003285 max=0.003730 Jy/beam
! Clean residual mean=-0.000009 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.100366 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.100366 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.683 mas, bmaj=4.358 mas, bpa=0.8687 degrees
! Estimated noise=0.142953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00968712 Jy
! Component: 100  -  total flux cleaned = 0.0143426 Jy
! Component: 150  -  total flux cleaned = 0.0174427 Jy
! Component: 200  -  total flux cleaned = 0.0196151 Jy
! Total flux subtracted in 200 components = 0.0196151 Jy
! Clean residual min=-0.001607 max=0.001682 Jy/beam
! Clean residual mean=-0.000002 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.119981 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 82 components and 0.119981 Jy
! Inverting map 
! Added new window around map position (-11.1, 31.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148685 Jy
! Component: 100  -  total flux cleaned = 0.00194804 Jy
! Component: 150  -  total flux cleaned = 0.00229612 Jy
! Component: 200  -  total flux cleaned = 0.00251901 Jy
! Total flux subtracted in 200 components = 0.00251901 Jy
! Clean residual min=-0.001470 max=0.001455 Jy/beam
! Clean residual mean=-0.000000 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.1225 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 100 components and 0.1225 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 8.28519e-05 Jy
! Component: 100  -  total flux cleaned = 8.16658e-05 Jy
! Component: 150  -  total flux cleaned = 0.000158951 Jy
! Component: 200  -  total flux cleaned = 0.000159086 Jy
! Total flux subtracted in 200 components = 0.000159086 Jy
! Clean residual min=-0.001438 max=0.001402 Jy/beam
! Clean residual mean=-0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.12266 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 111 components and 0.12266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044629Jy  sigma=0.812935
! Fit after  self-cal, rms=0.044607Jy  sigma=0.812742
wmodel J0635-262B_C_map.mod
! Writing 111 model components to file: J0635-262B_C_map.mod
wobs   J0635-262B_C_uvs.fits
! Writing UV FITS file: J0635-262B_C_uvs.fits
wwins  J0635-262B_C_map.win
! wwins: Wrote 6 windows to J0635-262B_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.40967e-05 Jy
! Component: 100  -  total flux cleaned = -0.00017484 Jy
! Component: 150  -  total flux cleaned = -0.000334361 Jy
! Component: 200  -  total flux cleaned = -0.000465552 Jy
! Component: 250  -  total flux cleaned = -0.000550166 Jy
! Component: 300  -  total flux cleaned = -0.000693194 Jy
! Component: 350  -  total flux cleaned = -0.000772732 Jy
! Component: 400  -  total flux cleaned = -0.000851243 Jy
! Component: 450  -  total flux cleaned = -0.000889816 Jy
! Component: 500  -  total flux cleaned = -0.000927832 Jy
! Component: 550  -  total flux cleaned = -0.000946437 Jy
! Component: 600  -  total flux cleaned = -0.00100111 Jy
! Component: 650  -  total flux cleaned = -0.000983087 Jy
! Component: 700  -  total flux cleaned = -0.00100119 Jy
! Component: 750  -  total flux cleaned = -0.00105371 Jy
! Component: 800  -  total flux cleaned = -0.00100173 Jy
! Component: 850  -  total flux cleaned = -0.00101886 Jy
! Component: 900  -  total flux cleaned = -0.000985129 Jy
! Component: 950  -  total flux cleaned = -0.00098528 Jy
! Component: 1000  -  total flux cleaned = -0.000952222 Jy
! Component: 1050  -  total flux cleaned = -0.00098458 Jy
! Component: 1100  -  total flux cleaned = -0.000903947 Jy
! Component: 1150  -  total flux cleaned = -0.000967705 Jy
! Component: 1200  -  total flux cleaned = -0.000951814 Jy
! Component: 1250  -  total flux cleaned = -0.000951697 Jy
! Component: 1300  -  total flux cleaned = -0.000982628 Jy
! Component: 1350  -  total flux cleaned = -0.000936909 Jy
! Component: 1400  -  total flux cleaned = -0.00092192 Jy
! Component: 1450  -  total flux cleaned = -0.000937018 Jy
! Component: 1500  -  total flux cleaned = -0.00092231 Jy
! Component: 1550  -  total flux cleaned = -0.000907388 Jy
! Component: 1600  -  total flux cleaned = -0.000892503 Jy
! Component: 1650  -  total flux cleaned = -0.000848882 Jy
! Component: 1700  -  total flux cleaned = -0.000863332 Jy
! Component: 1750  -  total flux cleaned = -0.000834537 Jy
! Component: 1800  -  total flux cleaned = -0.000734739 Jy
! Component: 1850  -  total flux cleaned = -0.0007492 Jy
! Component: 1900  -  total flux cleaned = -0.000763313 Jy
! Component: 1950  -  total flux cleaned = -0.000749264 Jy
! Component: 2000  -  total flux cleaned = -0.000749373 Jy
! Component: 2050  -  total flux cleaned = -0.000776936 Jy
! Component: 2100  -  total flux cleaned = -0.000735948 Jy
! Component: 2150  -  total flux cleaned = -0.000762959 Jy
! Component: 2200  -  total flux cleaned = -0.000722526 Jy
! Component: 2250  -  total flux cleaned = -0.000709274 Jy
! Component: 2300  -  total flux cleaned = -0.000722607 Jy
! Component: 2350  -  total flux cleaned = -0.000709473 Jy
! Component: 2400  -  total flux cleaned = -0.000709368 Jy
! Component: 2450  -  total flux cleaned = -0.000657066 Jy
! Component: 2500  -  total flux cleaned = -0.000683061 Jy
! Component: 2550  -  total flux cleaned = -0.000683132 Jy
! Component: 2600  -  total flux cleaned = -0.000708597 Jy
! Component: 2650  -  total flux cleaned = -0.000682876 Jy
! Component: 2700  -  total flux cleaned = -0.000644724 Jy
! Component: 2750  -  total flux cleaned = -0.000619423 Jy
! Component: 2800  -  total flux cleaned = -0.000619504 Jy
! Component: 2850  -  total flux cleaned = -0.000607061 Jy
! Component: 2900  -  total flux cleaned = -0.000582154 Jy
! Component: 2950  -  total flux cleaned = -0.000619179 Jy
! Component: 3000  -  total flux cleaned = -0.000570175 Jy
! Component: 3050  -  total flux cleaned = -0.000582371 Jy
! Component: 3100  -  total flux cleaned = -0.000570204 Jy
! Component: 3150  -  total flux cleaned = -0.000582242 Jy
! Component: 3200  -  total flux cleaned = -0.00052222 Jy
! Component: 3250  -  total flux cleaned = -0.000534201 Jy
! Component: 3300  -  total flux cleaned = -0.000427275 Jy
! Component: 3350  -  total flux cleaned = -0.000451056 Jy
! Component: 3400  -  total flux cleaned = -0.000392334 Jy
! Component: 3450  -  total flux cleaned = -0.000368952 Jy
! Component: 3500  -  total flux cleaned = -0.000334021 Jy
! Component: 3550  -  total flux cleaned = -0.000322433 Jy
! Component: 3600  -  total flux cleaned = -0.000311065 Jy
! Component: 3650  -  total flux cleaned = -0.000265188 Jy
! Component: 3700  -  total flux cleaned = -0.00021956 Jy
! Component: 3750  -  total flux cleaned = -0.000174143 Jy
! Component: 3800  -  total flux cleaned = -0.00021937 Jy
! Component: 3850  -  total flux cleaned = -0.000196934 Jy
! Component: 3900  -  total flux cleaned = -0.000185773 Jy
! Component: 3950  -  total flux cleaned = -0.000141205 Jy
! Component: 4000  -  total flux cleaned = -9.69897e-05 Jy
! Component: 4050  -  total flux cleaned = -0.000119081 Jy
! Total flux subtracted in 4096 components = -0.000163024 Jy
! Clean residual min=-0.000605 max=0.000548 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.122497 Jy
keep
! Adding 251 model components to the UV plane model.
! The established model now contains 362 components and 0.122497 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0635-262B_C_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.683 x 4.358 at 0.8687 degrees (North through East)
! Clean map  min=-0.0011456  max=0.077346 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0635-262B_C_b_map.fits
wmodel /vlbi/vcs9/uvm//J0635-262B_C_b_map.mod
! Writing 362 model components to file: /vlbi/vcs9/uvm//J0635-262B_C_b_map.mod
wobs   /vlbi/vcs9/uvm//J0635-262B_C_b_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0635-262B_C_b_uvs.fits
wwins  /vlbi/vcs9/uvm//J0635-262B_C_b_map.win
! wwins: Wrote 7 windows to /vlbi/vcs9/uvm//J0635-262B_C_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0773462 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000194027 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.752567 0.752567 1.50513 3.01027 6.02054 12.0411 24.0821 48.1643 96.3286
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  398.635 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0635-262B_C_b_dfm.log closed on Tue Dec 26 21:47:24 2017