! Started logfile: /vlbi/vcs9/uvm//J0635-262A_X_b_dfm.log on Tue Dec 26 21:47:13 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J0635-262A_X_b_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0635-262A_X_b_uvm.fits
! AN table 1: 166 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.756627 visibilities/baseline/integration-bin.
! Found source: J0635-262A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 45216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J0635-262A_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.142712 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 357 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011500Jy  sigma=20.197052
! Fit after  self-cal, rms=0.866764Jy  sigma=17.130127
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.6776 mas, bmaj=1.858 mas, bpa=-2.442 degrees
! Estimated noise=0.382461 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.115872 Jy
! Component: 100  -  total flux cleaned = 0.131176 Jy
! Total flux subtracted in 100 components = 0.131176 Jy
! Clean residual min=-0.003802 max=0.007825 Jy/beam
! Clean residual mean=0.000007 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.131176 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.131176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047803Jy  sigma=0.815729
! Fit after  self-cal, rms=0.047801Jy  sigma=0.815684
! Inverting map 
! Added new window around map position (1, -2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00792562 Jy
! Component: 100  -  total flux cleaned = 0.0117368 Jy
! Total flux subtracted in 100 components = 0.0117368 Jy
! Clean residual min=-0.003847 max=0.005912 Jy/beam
! Clean residual mean=0.000005 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.142913 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.142913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046472Jy  sigma=0.784931
! Fit after  self-cal, rms=0.046354Jy  sigma=0.780744
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9387 mas, bmaj=2.444 mas, bpa=-1.878 degrees
! Estimated noise=0.167295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 3.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695821 Jy
! Component: 100  -  total flux cleaned = 0.0103133 Jy
! Component: 150  -  total flux cleaned = 0.0117425 Jy
! Component: 200  -  total flux cleaned = 0.0120845 Jy
! Total flux subtracted in 200 components = 0.0120845 Jy
! Clean residual min=-0.002301 max=0.002462 Jy/beam
! Clean residual mean=0.000004 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.154997 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 65 components and 0.154997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045795Jy  sigma=0.763299
! Fit after  self-cal, rms=0.045772Jy  sigma=0.762812
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.983714
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.21     KP        1.01     
!   LA        1.02     MK        1.00     NL        0.95     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.981527
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.20     KP        1.00     
!   LA        1.04     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.980317
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.25     KP        1.00     
!   LA        1.01     MK        0.99     NL        0.97     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.983991
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.23     KP        1.01     
!   LA        1.01     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.989715
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.21     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.97     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.985152
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.19     KP        1.00     
!   LA        1.02     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.978079
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.22     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.02     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.984959
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.20     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.045772Jy  sigma=0.762812
! Fit after  self-cal, rms=0.047029Jy  sigma=0.758121
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047029Jy  sigma=0.758121
! Fit after  self-cal, rms=0.047031Jy  sigma=0.758120
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9519 mas, bmaj=2.452 mas, bpa=-1.725 degrees
! Estimated noise=0.161957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00458175 Jy
! Component: 100  -  total flux cleaned = -0.00567039 Jy
! Component: 150  -  total flux cleaned = -0.0062561 Jy
! Component: 200  -  total flux cleaned = -0.00650797 Jy
! Total flux subtracted in 200 components = -0.00650797 Jy
! Clean residual min=-0.001692 max=0.001751 Jy/beam
! Clean residual mean=0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.148489 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 87 components and 0.148489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046666Jy  sigma=0.749752
! Fit after  self-cal, rms=0.046656Jy  sigma=0.749584
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046656Jy  sigma=0.749584
! Fit after  self-cal, rms=0.046657Jy  sigma=0.749546
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195039 Jy
! Component: 100  -  total flux cleaned = -0.000224318 Jy
! Component: 150  -  total flux cleaned = -0.000273643 Jy
! Component: 200  -  total flux cleaned = -0.000272737 Jy
! Total flux subtracted in 200 components = -0.000272737 Jy
! Clean residual min=-0.001595 max=0.001690 Jy/beam
! Clean residual mean=0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.148217 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 100 components and 0.148217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046624Jy  sigma=0.748933
! Fit after  self-cal, rms=0.046621Jy  sigma=0.748854
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9519 x 2.452 at -1.725 degrees (North through East)
! Clean map  min=-0.0015201  max=0.13078 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046621Jy  sigma=0.748854
! Fit after  self-cal, rms=0.050820Jy  sigma=0.730370
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050820Jy  sigma=0.730370
! Fit after  self-cal, rms=0.050826Jy  sigma=0.730365
! Inverting map and beam 
! Estimated beam: bmin=0.9566 mas, bmaj=2.466 mas, bpa=-1.809 degrees
! Estimated noise=0.162089 mJy/beam.
! Added new window around map position (0.2, 8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302523 Jy
! Component: 100  -  total flux cleaned = 0.000421013 Jy
! Component: 150  -  total flux cleaned = 0.000452127 Jy
! Component: 200  -  total flux cleaned = 0.000528539 Jy
! Total flux subtracted in 200 components = 0.000528539 Jy
! Clean residual min=-0.000817 max=0.000795 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.148745 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 123 components and 0.148745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050775Jy  sigma=0.729049
! Fit after  self-cal, rms=0.050773Jy  sigma=0.728985
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6793 mas, bmaj=1.848 mas, bpa=-2.281 degrees
! Estimated noise=0.371987 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.115603 Jy
! Component: 100  -  total flux cleaned = 0.131452 Jy
! Component: 150  -  total flux cleaned = 0.136309 Jy
! Component: 200  -  total flux cleaned = 0.139424 Jy
! Total flux subtracted in 200 components = 0.139424 Jy
! Clean residual min=-0.001874 max=0.001733 Jy/beam
! Clean residual mean=0.000003 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.139424 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.139424 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9566 mas, bmaj=2.466 mas, bpa=-1.809 degrees
! Estimated noise=0.162089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417444 Jy
! Component: 100  -  total flux cleaned = 0.00634141 Jy
! Component: 150  -  total flux cleaned = 0.00769745 Jy
! Component: 200  -  total flux cleaned = 0.00859649 Jy
! Total flux subtracted in 200 components = 0.00859649 Jy
! Clean residual min=-0.000772 max=0.000649 Jy/beam
! Clean residual mean=0.000000 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.14802 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 83 components and 0.14802 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536381 Jy
! Component: 100  -  total flux cleaned = 0.000656947 Jy
! Component: 150  -  total flux cleaned = 0.000792066 Jy
! Component: 200  -  total flux cleaned = 0.000892026 Jy
! Total flux subtracted in 200 components = 0.000892026 Jy
! Clean residual min=-0.000733 max=0.000656 Jy/beam
! Clean residual mean=-0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.148912 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 102 components and 0.148912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050758Jy  sigma=0.728563
! Fit after  self-cal, rms=0.050754Jy  sigma=0.728508
wmodel J0635-262A_X_map.mod
! Writing 102 model components to file: J0635-262A_X_map.mod
wobs   J0635-262A_X_uvs.fits
! Writing UV FITS file: J0635-262A_X_uvs.fits
wwins  J0635-262A_X_map.win
! wwins: Wrote 4 windows to J0635-262A_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104803 Jy
! Component: 100  -  total flux cleaned = -0.000216853 Jy
! Component: 150  -  total flux cleaned = -0.000322614 Jy
! Component: 200  -  total flux cleaned = -0.000444152 Jy
! Component: 250  -  total flux cleaned = -0.000531903 Jy
! Component: 300  -  total flux cleaned = -0.000569815 Jy
! Component: 350  -  total flux cleaned = -0.000625304 Jy
! Component: 400  -  total flux cleaned = -0.000661054 Jy
! Component: 450  -  total flux cleaned = -0.000660955 Jy
! Component: 500  -  total flux cleaned = -0.00063517 Jy
! Component: 550  -  total flux cleaned = -0.000635136 Jy
! Component: 600  -  total flux cleaned = -0.000610333 Jy
! Component: 650  -  total flux cleaned = -0.000602152 Jy
! Component: 700  -  total flux cleaned = -0.000570069 Jy
! Component: 750  -  total flux cleaned = -0.000554376 Jy
! Component: 800  -  total flux cleaned = -0.000538804 Jy
! Component: 850  -  total flux cleaned = -0.000538652 Jy
! Component: 900  -  total flux cleaned = -0.000523633 Jy
! Component: 950  -  total flux cleaned = -0.00053109 Jy
! Component: 1000  -  total flux cleaned = -0.00052388 Jy
! Component: 1050  -  total flux cleaned = -0.000545513 Jy
! Component: 1100  -  total flux cleaned = -0.000559664 Jy
! Component: 1150  -  total flux cleaned = -0.00054544 Jy
! Component: 1200  -  total flux cleaned = -0.000545531 Jy
! Component: 1250  -  total flux cleaned = -0.000559327 Jy
! Component: 1300  -  total flux cleaned = -0.00055936 Jy
! Component: 1350  -  total flux cleaned = -0.000559376 Jy
! Component: 1400  -  total flux cleaned = -0.000559256 Jy
! Component: 1450  -  total flux cleaned = -0.000546061 Jy
! Component: 1500  -  total flux cleaned = -0.0005201 Jy
! Component: 1550  -  total flux cleaned = -0.000507394 Jy
! Component: 1600  -  total flux cleaned = -0.000513689 Jy
! Component: 1650  -  total flux cleaned = -0.000488606 Jy
! Component: 1700  -  total flux cleaned = -0.000482475 Jy
! Component: 1750  -  total flux cleaned = -0.000482307 Jy
! Component: 1800  -  total flux cleaned = -0.000445913 Jy
! Component: 1850  -  total flux cleaned = -0.000433937 Jy
! Component: 1900  -  total flux cleaned = -0.000427918 Jy
! Component: 1950  -  total flux cleaned = -0.000404192 Jy
! Component: 2000  -  total flux cleaned = -0.000409979 Jy
! Component: 2050  -  total flux cleaned = -0.000398334 Jy
! Component: 2100  -  total flux cleaned = -0.000358306 Jy
! Component: 2150  -  total flux cleaned = -0.000364044 Jy
! Component: 2200  -  total flux cleaned = -0.00036405 Jy
! Component: 2250  -  total flux cleaned = -0.000336214 Jy
! Component: 2300  -  total flux cleaned = -0.000325169 Jy
! Component: 2350  -  total flux cleaned = -0.000336168 Jy
! Component: 2400  -  total flux cleaned = -0.000309023 Jy
! Component: 2450  -  total flux cleaned = -0.000303696 Jy
! Component: 2500  -  total flux cleaned = -0.000303756 Jy
! Component: 2550  -  total flux cleaned = -0.00029311 Jy
! Component: 2600  -  total flux cleaned = -0.00028265 Jy
! Component: 2650  -  total flux cleaned = -0.000277419 Jy
! Component: 2700  -  total flux cleaned = -0.00027744 Jy
! Component: 2750  -  total flux cleaned = -0.000241471 Jy
! Component: 2800  -  total flux cleaned = -0.000231347 Jy
! Component: 2850  -  total flux cleaned = -0.000226322 Jy
! Component: 2900  -  total flux cleaned = -0.000201174 Jy
! Component: 2950  -  total flux cleaned = -0.000201137 Jy
! Component: 3000  -  total flux cleaned = -0.000171424 Jy
! Component: 3050  -  total flux cleaned = -0.000176381 Jy
! Component: 3100  -  total flux cleaned = -0.000171464 Jy
! Component: 3150  -  total flux cleaned = -0.000156869 Jy
! Component: 3200  -  total flux cleaned = -0.000152038 Jy
! Component: 3250  -  total flux cleaned = -0.000147226 Jy
! Component: 3300  -  total flux cleaned = -0.000142461 Jy
! Component: 3350  -  total flux cleaned = -0.000156631 Jy
! Component: 3400  -  total flux cleaned = -0.000133153 Jy
! Component: 3450  -  total flux cleaned = -0.000156465 Jy
! Component: 3500  -  total flux cleaned = -0.000142558 Jy
! Component: 3550  -  total flux cleaned = -0.000142582 Jy
! Component: 3600  -  total flux cleaned = -0.000128819 Jy
! Component: 3650  -  total flux cleaned = -0.00011516 Jy
! Component: 3700  -  total flux cleaned = -0.000110678 Jy
! Component: 3750  -  total flux cleaned = -0.000115135 Jy
! Component: 3800  -  total flux cleaned = -8.83179e-05 Jy
! Component: 3850  -  total flux cleaned = -7.50198e-05 Jy
! Component: 3900  -  total flux cleaned = -7.94385e-05 Jy
! Component: 3950  -  total flux cleaned = -7.50555e-05 Jy
! Component: 4000  -  total flux cleaned = -8.37839e-05 Jy
! Component: 4050  -  total flux cleaned = -7.07032e-05 Jy
! Total flux subtracted in 4096 components = -5.34374e-05 Jy
! Clean residual min=-0.000297 max=0.000246 Jy/beam
! Clean residual mean=0.000000 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.148859 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 411 components and 0.148859 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0635-262A_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9566 x 2.466 at -1.809 degrees (North through East)
! Clean map  min=-0.00050067  max=0.13322 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0635-262A_X_b_map.fits
wmodel /vlbi/vcs9/uvm//J0635-262A_X_b_map.mod
! Writing 411 model components to file: /vlbi/vcs9/uvm//J0635-262A_X_b_map.mod
wobs   /vlbi/vcs9/uvm//J0635-262A_X_b_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0635-262A_X_b_uvs.fits
wwins  /vlbi/vcs9/uvm//J0635-262A_X_b_map.win
! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J0635-262A_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133217 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.67585e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.172857 0.172857 0.345715 0.69143 1.38286 2.76572 5.53144 11.0629 22.1258 44.2515 88.503
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1735.53 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0635-262A_X_b_dfm.log closed on Tue Dec 26 21:47:18 2017