! Started logfile: /vlbi/vcs9/uvm//J0617+5404_X_a_dfm.log on Tue Dec 26 21:46:06 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0617+5404_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0617+5404_X_a_uvm.fits ! AN table 1: 17 integrations on 1 of 1 possible baselines. ! AN table 2: 75 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.873662 visibilities/baseline/integration-bin. ! Found source: J0617+5404 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 3264 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0617+5404_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0252859 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 51 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001091Jy sigma=27.985223 ! Fit after self-cal, rms=0.985218Jy sigma=27.679194 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=6.226 mas, bmaj=9.07 mas, bpa=52.62 degrees ! Estimated noise=0.507762 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131797 Jy ! Component: 100 - total flux cleaned = 0.0142276 Jy ! Total flux subtracted in 100 components = 0.0142276 Jy ! Clean residual min=-0.000712 max=0.000748 Jy/beam ! Clean residual mean=-0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.0142276 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0142276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020346Jy sigma=0.558899 ! Fit after self-cal, rms=0.020331Jy sigma=0.558479 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.422 mas, bmaj=9.777 mas, bpa=52.57 degrees ! Estimated noise=0.474272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299695 Jy ! Component: 100 - total flux cleaned = -0.000515613 Jy ! Component: 150 - total flux cleaned = -0.000718851 Jy ! Component: 200 - total flux cleaned = -0.000880791 Jy ! Total flux subtracted in 200 components = -0.000880791 Jy ! Clean residual min=-0.000380 max=0.000365 Jy/beam ! Clean residual mean=-0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.0133468 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.0133468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020317Jy sigma=0.558119 ! Fit after self-cal, rms=0.020317Jy sigma=0.558114 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.980316 ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 KP 1.36 LA 0.75 PT 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.963192 ! Telescope amplitude corrections in sub-array 2: ! FD 1.13 KP 0.91 LA 1.07 PT 1.05 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.9114 ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 KP 1.09 LA 1.11 PT 1.20 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.979467 ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 KP 1.08 LA 0.91 PT 1.00 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.04622 ! Telescope amplitude corrections in sub-array 2: ! FD 0.88 KP 0.87 LA 1.01 PT 1.06 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.983131 ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 KP 1.00 LA 0.95 PT 1.17 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.974443 ! Telescope amplitude corrections in sub-array 2: ! FD 1.17 KP 0.85 LA 1.13 PT 0.96 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! LA 0.00* PT 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.0097 ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 KP 0.92 LA 1.06 PT 1.04 ! ! ! Fit before self-cal, rms=0.020317Jy sigma=0.558114 ! Fit after self-cal, rms=0.020671Jy sigma=0.561729 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020671Jy sigma=0.561729 ! Fit after self-cal, rms=0.020673Jy sigma=0.561689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.577 mas, bmaj=9.465 mas, bpa=52.23 degrees ! Estimated noise=0.480473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512102 Jy ! Component: 100 - total flux cleaned = -0.000632003 Jy ! Component: 150 - total flux cleaned = -0.000706166 Jy ! Component: 200 - total flux cleaned = -0.000752725 Jy ! Total flux subtracted in 200 components = -0.000752725 Jy ! Clean residual min=-0.000363 max=0.000314 Jy/beam ! Clean residual mean=0.000001 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.0125941 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 61 model components to the UV plane model. ! The established model now contains 119 components and 0.0125941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020666Jy sigma=0.561414 ! Fit after self-cal, rms=0.020666Jy sigma=0.561413 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020666Jy sigma=0.561413 ! Fit after self-cal, rms=0.020615Jy sigma=0.559532 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.42918e-05 Jy ! Component: 100 - total flux cleaned = -7.42563e-05 Jy ! Component: 150 - total flux cleaned = -9.12832e-05 Jy ! Component: 200 - total flux cleaned = -0.000101882 Jy ! Total flux subtracted in 200 components = -0.000101882 Jy ! Clean residual min=-0.000358 max=0.000309 Jy/beam ! Clean residual mean=0.000002 rms=0.000087 Jy/beam ! Combined flux in latest and established models = 0.0124922 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 0.0124922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020615Jy sigma=0.559516 ! Fit after self-cal, rms=0.020612Jy sigma=0.559295 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.577 x 9.465 at 52.23 degrees (North through East) ! Clean map min=-0.00045336 max=0.014145 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.228 mas, bmaj=9.032 mas, bpa=52.28 degrees ! Estimated noise=0.509779 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127041 Jy ! Component: 100 - total flux cleaned = 0.0136874 Jy ! Component: 150 - total flux cleaned = 0.0134801 Jy ! Component: 200 - total flux cleaned = 0.0132322 Jy ! Total flux subtracted in 200 components = 0.0132322 Jy ! Clean residual min=-0.000425 max=0.000420 Jy/beam ! Clean residual mean=-0.000004 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0132322 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.0132322 Jy ! Inverting map and beam ! Estimated beam: bmin=6.577 mas, bmaj=9.465 mas, bpa=52.23 degrees ! Estimated noise=0.480473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240476 Jy ! Component: 100 - total flux cleaned = -0.000397863 Jy ! Component: 150 - total flux cleaned = -0.000510319 Jy ! Component: 200 - total flux cleaned = -0.000595351 Jy ! Total flux subtracted in 200 components = -0.000595351 Jy ! Clean residual min=-0.000353 max=0.000306 Jy/beam ! Clean residual mean=0.000001 rms=0.000085 Jy/beam ! Combined flux in latest and established models = 0.0126369 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 82 components and 0.0126369 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.90921e-05 Jy ! Component: 100 - total flux cleaned = -9.0941e-05 Jy ! Component: 150 - total flux cleaned = -0.000109646 Jy ! Component: 200 - total flux cleaned = -0.000125052 Jy ! Total flux subtracted in 200 components = -0.000125052 Jy ! Clean residual min=-0.000351 max=0.000294 Jy/beam ! Clean residual mean=0.000002 rms=0.000083 Jy/beam ! Combined flux in latest and established models = 0.0125118 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.0125118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020612Jy sigma=0.559290 ! Fit after self-cal, rms=0.020614Jy sigma=0.559249 wmodel J0617+5404_X_map.mod ! Writing 102 model components to file: J0617+5404_X_map.mod wobs J0617+5404_X_uvs.fits ! Writing UV FITS file: J0617+5404_X_uvs.fits wwins J0617+5404_X_map.win ! wwins: Wrote 1 windows to J0617+5404_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.44688e-05 Jy ! Component: 100 - total flux cleaned = -4.44454e-05 Jy ! Component: 150 - total flux cleaned = -5.34322e-05 Jy ! Component: 200 - total flux cleaned = -7.52237e-05 Jy ! Component: 250 - total flux cleaned = -7.94794e-05 Jy ! Component: 300 - total flux cleaned = -7.12084e-05 Jy ! Component: 350 - total flux cleaned = -6.29593e-05 Jy ! Component: 400 - total flux cleaned = -5.88421e-05 Jy ! Component: 450 - total flux cleaned = -5.46808e-05 Jy ! Component: 500 - total flux cleaned = -4.63293e-05 Jy ! Component: 550 - total flux cleaned = -5.05823e-05 Jy ! Component: 600 - total flux cleaned = -5.9038e-05 Jy ! Component: 650 - total flux cleaned = -7.19701e-05 Jy ! Component: 700 - total flux cleaned = -8.06488e-05 Jy ! Component: 750 - total flux cleaned = -9.84979e-05 Jy ! Component: 800 - total flux cleaned = -0.000116726 Jy ! Component: 850 - total flux cleaned = -0.000130657 Jy ! Component: 900 - total flux cleaned = -0.000140151 Jy ! Component: 950 - total flux cleaned = -0.000144983 Jy ! Component: 1000 - total flux cleaned = -0.000154801 Jy ! Component: 1050 - total flux cleaned = -0.000159708 Jy ! Component: 1100 - total flux cleaned = -0.000175134 Jy ! Component: 1150 - total flux cleaned = -0.000190938 Jy ! Component: 1200 - total flux cleaned = -0.000212566 Jy ! Component: 1250 - total flux cleaned = -0.000234764 Jy ! Component: 1300 - total flux cleaned = -0.000263367 Jy ! Component: 1350 - total flux cleaned = -0.0002811 Jy ! Component: 1400 - total flux cleaned = -0.000305335 Jy ! Component: 1450 - total flux cleaned = -0.000323977 Jy ! Component: 1500 - total flux cleaned = -0.000349602 Jy ! Component: 1550 - total flux cleaned = -0.00036931 Jy ! Component: 1600 - total flux cleaned = -0.000389685 Jy ! Component: 1650 - total flux cleaned = -0.000410705 Jy ! Component: 1700 - total flux cleaned = -0.000432438 Jy ! Component: 1750 - total flux cleaned = -0.000432525 Jy ! Component: 1800 - total flux cleaned = -0.000432574 Jy ! Component: 1850 - total flux cleaned = -0.000432425 Jy ! Component: 1900 - total flux cleaned = -0.000424373 Jy ! Component: 1950 - total flux cleaned = -0.000424414 Jy ! Component: 2000 - total flux cleaned = -0.000424613 Jy ! Component: 2050 - total flux cleaned = -0.000424447 Jy ! Component: 2100 - total flux cleaned = -0.000452082 Jy ! Component: 2150 - total flux cleaned = -0.000500291 Jy ! Component: 2200 - total flux cleaned = -0.000520122 Jy ! Component: 2250 - total flux cleaned = -0.000571677 Jy ! Component: 2300 - total flux cleaned = -0.000593285 Jy ! Component: 2350 - total flux cleaned = -0.000648197 Jy ! Component: 2400 - total flux cleaned = -0.000682327 Jy ! Component: 2450 - total flux cleaned = -0.00072937 Jy ! Component: 2500 - total flux cleaned = -0.00079022 Jy ! Component: 2550 - total flux cleaned = -0.000840411 Jy ! Component: 2600 - total flux cleaned = -0.000918731 Jy ! Component: 2650 - total flux cleaned = -0.000973027 Jy ! Component: 2700 - total flux cleaned = -0.00104311 Jy ! Component: 2750 - total flux cleaned = -0.00113029 Jy ! Component: 2800 - total flux cleaned = -0.00119074 Jy ! Component: 2850 - total flux cleaned = -0.00128405 Jy ! Component: 2900 - total flux cleaned = -0.00138085 Jy ! Component: 2950 - total flux cleaned = -0.00146427 Jy ! Component: 3000 - total flux cleaned = -0.00156836 Jy ! Component: 3050 - total flux cleaned = -0.00164017 Jy ! Component: 3100 - total flux cleaned = -0.00175222 Jy ! Component: 3150 - total flux cleaned = -0.00184867 Jy ! Component: 3200 - total flux cleaned = -0.00198918 Jy ! Component: 3250 - total flux cleaned = -0.00207263 Jy ! Component: 3300 - total flux cleaned = -0.00220178 Jy ! Component: 3350 - total flux cleaned = -0.00231327 Jy ! Component: 3400 - total flux cleaned = -0.0024289 Jy ! Component: 3450 - total flux cleaned = -0.00259723 Jy ! Component: 3500 - total flux cleaned = -0.00272228 Jy ! Component: 3550 - total flux cleaned = -0.00285127 Jy ! Component: 3600 - total flux cleaned = -0.00301306 Jy ! Component: 3650 - total flux cleaned = -0.00315287 Jy ! Component: 3700 - total flux cleaned = -0.00329732 Jy ! Component: 3750 - total flux cleaned = -0.00344626 Jy ! Component: 3800 - total flux cleaned = -0.00366322 Jy ! Component: 3850 - total flux cleaned = -0.00382517 Jy ! Component: 3900 - total flux cleaned = -0.00399286 Jy ! Component: 3950 - total flux cleaned = -0.00420018 Jy ! Component: 4000 - total flux cleaned = -0.00434364 Jy ! Component: 4050 - total flux cleaned = -0.00456727 Jy ! Total flux subtracted in 4096 components = -0.00472185 Jy ! Clean residual min=-0.002052 max=0.001991 Jy/beam ! Clean residual mean=-0.000046 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.00778996 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 233 components and 0.00778995 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0617+5404_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.577 x 9.465 at 52.23 degrees (North through East) ! Clean map min=-0.0044985 max=0.013884 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0617+5404_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0617+5404_X_a_map.mod ! Writing 233 model components to file: /vlbi/vcs9/uvm//J0617+5404_X_a_map.mod wobs /vlbi/vcs9/uvm//J0617+5404_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0617+5404_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0617+5404_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0617+5404_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0138843 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000637368 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -13.7717 13.7717 27.5434 55.0868 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.013 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 21.783 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0617+5404_X_a_dfm.log closed on Tue Dec 26 21:46:09 2017