! Started logfile: /vlbi/vcs9/uvm//J0617+5404_C_a_dfm.log on Tue Dec 26 21:46:01 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0617+5404_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0617+5404_C_a_uvm.fits
! AN table 1: 18 integrations on 1 of 1 possible baselines.
! AN table 2: 17 integrations on 1 of 1 possible baselines.
! AN table 3: 80 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.817493 visibilities/baseline/integration-bin.
! Found source: J0617+5404
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 11216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0617+5404_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0246351 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  A total of 34 telescope corrections were flagged in sub-array 2.
!  A total of 39 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000021Jy  sigma=35.319802
! Fit after  self-cal, rms=0.989114Jy  sigma=34.916210
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=3.83 mas, bmaj=5.224 mas, bpa=54.35 degrees
! Estimated noise=0.418853 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927665 Jy
! Component: 100  -  total flux cleaned = 0.0117499 Jy
! Total flux subtracted in 100 components = 0.0117499 Jy
! Clean residual min=-0.001421 max=0.001563 Jy/beam
! Clean residual mean=-0.000020 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0117499 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0117499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021869Jy  sigma=0.737258
! Fit after  self-cal, rms=0.021847Jy  sigma=0.736397
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.55 mas, bmaj=5.439 mas, bpa=58.43 degrees
! Estimated noise=0.191968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224502 Jy
! Component: 100  -  total flux cleaned = 0.00363328 Jy
! Component: 150  -  total flux cleaned = 0.00455952 Jy
! Component: 200  -  total flux cleaned = 0.00519022 Jy
! Total flux subtracted in 200 components = 0.00519022 Jy
! Clean residual min=-0.001397 max=0.001592 Jy/beam
! Clean residual mean=-0.000025 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.0169401 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 65 components and 0.0169401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021654Jy  sigma=0.729418
! Fit after  self-cal, rms=0.021654Jy  sigma=0.729387
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.03021
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.88     FD        1.16     KP        0.97     LA        0.81     
!   NL        1.02     OV        1.23     PT        0.72     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.00702
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        0.96     KP        0.92     LA        0.83     
!   NL        1.16     OV        1.40     PT        0.62     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.02626
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.85     FD        1.00     KP        0.94     LA        1.02     
!   NL        0.94     OV        1.27     PT        0.80     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.890822
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        1.84     KP        1.04     LA        0.76     
!   NL        1.29     OV        1.11     PT        0.81     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.913874
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.84     FD        1.60     KP        0.86     LA        1.24     
!   NL        1.03     OV        1.34     PT        0.74     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.896474
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     FD        1.50     KP        1.18     LA        0.76     
!   NL        1.05     OV        1.48     PT        0.86     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.842506
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.16     FD        1.90     KP        1.06     LA        0.98     
!   NL        1.18     OV        1.23     PT        0.80     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    PT        0.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.969147
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.90     FD        1.45     KP        0.92     LA        1.06     
!   NL        1.01     OV        1.12     PT        0.76     
! 
! 
! Fit before self-cal, rms=0.021654Jy  sigma=0.729387
! Fit after  self-cal, rms=0.022250Jy  sigma=0.723909
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022250Jy  sigma=0.723909
! Fit after  self-cal, rms=0.022256Jy  sigma=0.723838
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.689 mas, bmaj=5.59 mas, bpa=69.95 degrees
! Estimated noise=0.163878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012432 Jy
! Component: 100  -  total flux cleaned = -0.00164693 Jy
! Component: 150  -  total flux cleaned = -0.00178729 Jy
! Component: 200  -  total flux cleaned = -0.00182775 Jy
! Total flux subtracted in 200 components = -0.00182775 Jy
! Clean residual min=-0.000949 max=0.000878 Jy/beam
! Clean residual mean=-0.000015 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0151123 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 110 components and 0.0151123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022229Jy  sigma=0.721422
! Fit after  self-cal, rms=0.022229Jy  sigma=0.721418
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022229Jy  sigma=0.721418
! Fit after  self-cal, rms=0.022177Jy  sigma=0.718784
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.75124e-05 Jy
! Component: 100  -  total flux cleaned = 5.81438e-05 Jy
! Component: 150  -  total flux cleaned = 6.70839e-05 Jy
! Component: 200  -  total flux cleaned = 7.12899e-05 Jy
! Total flux subtracted in 200 components = 7.12899e-05 Jy
! Clean residual min=-0.000946 max=0.000870 Jy/beam
! Clean residual mean=-0.000016 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0151836 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.0151836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022174Jy  sigma=0.718710
! Fit after  self-cal, rms=0.022174Jy  sigma=0.718458
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.689 x 5.59 at 69.95 degrees (North through East)
! Clean map  min=-0.00092549  max=0.010034 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.911 mas, bmaj=5.301 mas, bpa=57.55 degrees
! Estimated noise=0.383989 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00865477 Jy
! Component: 100  -  total flux cleaned = 0.0109419 Jy
! Component: 150  -  total flux cleaned = 0.0122753 Jy
! Component: 200  -  total flux cleaned = 0.0132035 Jy
! Total flux subtracted in 200 components = 0.0132035 Jy
! Clean residual min=-0.001161 max=0.001458 Jy/beam
! Clean residual mean=-0.000012 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0132035 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0132035 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.689 mas, bmaj=5.59 mas, bpa=69.95 degrees
! Estimated noise=0.163878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106664 Jy
! Component: 100  -  total flux cleaned = 0.00158302 Jy
! Component: 150  -  total flux cleaned = 0.00185079 Jy
! Component: 200  -  total flux cleaned = 0.00194395 Jy
! Total flux subtracted in 200 components = 0.00194395 Jy
! Clean residual min=-0.000981 max=0.000867 Jy/beam
! Clean residual mean=-0.000017 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0151474 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 48 components and 0.0151474 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.18441e-05 Jy
! Component: 100  -  total flux cleaned = 2.70233e-05 Jy
! Component: 150  -  total flux cleaned = 3.17224e-05 Jy
! Component: 200  -  total flux cleaned = 3.64713e-05 Jy
! Total flux subtracted in 200 components = 3.64713e-05 Jy
! Clean residual min=-0.000970 max=0.000874 Jy/beam
! Clean residual mean=-0.000017 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0151839 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.0151839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022170Jy  sigma=0.718429
! Fit after  self-cal, rms=0.022169Jy  sigma=0.718355
wmodel J0617+5404_C_map.mod
! Writing 51 model components to file: J0617+5404_C_map.mod
wobs   J0617+5404_C_uvs.fits
! Writing UV FITS file: J0617+5404_C_uvs.fits
wwins  J0617+5404_C_map.win
! wwins: Wrote 1 windows to J0617+5404_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.06318e-05 Jy
! Component: 100  -  total flux cleaned = -3.273e-06 Jy
! Component: 150  -  total flux cleaned = 2.0854e-05 Jy
! Component: 200  -  total flux cleaned = 9.70187e-05 Jy
! Component: 250  -  total flux cleaned = 0.000167515 Jy
! Component: 300  -  total flux cleaned = 0.000233678 Jy
! Component: 350  -  total flux cleaned = 0.00031438 Jy
! Component: 400  -  total flux cleaned = 0.000390787 Jy
! Component: 450  -  total flux cleaned = 0.000479276 Jy
! Component: 500  -  total flux cleaned = 0.000586452 Jy
! Component: 550  -  total flux cleaned = 0.00068185 Jy
! Component: 600  -  total flux cleaned = 0.000766538 Jy
! Component: 650  -  total flux cleaned = 0.000840884 Jy
! Component: 700  -  total flux cleaned = 0.00090559 Jy
! Component: 750  -  total flux cleaned = 0.0009432 Jy
! Component: 800  -  total flux cleaned = 0.000985425 Jy
! Component: 850  -  total flux cleaned = 0.00100856 Jy
! Component: 900  -  total flux cleaned = 0.00103687 Jy
! Component: 950  -  total flux cleaned = 0.00104793 Jy
! Component: 1000  -  total flux cleaned = 0.00105879 Jy
! Component: 1050  -  total flux cleaned = 0.00106936 Jy
! Component: 1100  -  total flux cleaned = 0.00108979 Jy
! Component: 1150  -  total flux cleaned = 0.00109478 Jy
! Component: 1200  -  total flux cleaned = 0.00110445 Jy
! Component: 1250  -  total flux cleaned = 0.00109963 Jy
! Component: 1300  -  total flux cleaned = 0.00110431 Jy
! Component: 1350  -  total flux cleaned = 0.00111341 Jy
! Component: 1400  -  total flux cleaned = 0.0011089 Jy
! Component: 1450  -  total flux cleaned = 0.00111336 Jy
! Component: 1500  -  total flux cleaned = 0.00110483 Jy
! Component: 1550  -  total flux cleaned = 0.00111335 Jy
! Component: 1600  -  total flux cleaned = 0.00111339 Jy
! Component: 1650  -  total flux cleaned = 0.00110928 Jy
! Component: 1700  -  total flux cleaned = 0.00109301 Jy
! Component: 1750  -  total flux cleaned = 0.00108899 Jy
! Component: 1800  -  total flux cleaned = 0.00106918 Jy
! Component: 1850  -  total flux cleaned = 0.00106921 Jy
! Component: 1900  -  total flux cleaned = 0.00105375 Jy
! Component: 1950  -  total flux cleaned = 0.00105375 Jy
! Component: 2000  -  total flux cleaned = 0.00104614 Jy
! Component: 2050  -  total flux cleaned = 0.00103863 Jy
! Component: 2100  -  total flux cleaned = 0.00103122 Jy
! Component: 2150  -  total flux cleaned = 0.00103124 Jy
! Component: 2200  -  total flux cleaned = 0.00103853 Jy
! Component: 2250  -  total flux cleaned = 0.0010349 Jy
! Component: 2300  -  total flux cleaned = 0.00103133 Jy
! Component: 2350  -  total flux cleaned = 0.00103843 Jy
! Component: 2400  -  total flux cleaned = 0.00103489 Jy
! Component: 2450  -  total flux cleaned = 0.00103139 Jy
! Component: 2500  -  total flux cleaned = 0.00103137 Jy
! Component: 2550  -  total flux cleaned = 0.00102445 Jy
! Component: 2600  -  total flux cleaned = 0.00102102 Jy
! Component: 2650  -  total flux cleaned = 0.00101417 Jy
! Component: 2700  -  total flux cleaned = 0.000997163 Jy
! Component: 2750  -  total flux cleaned = 0.000993763 Jy
! Component: 2800  -  total flux cleaned = 0.000983621 Jy
! Component: 2850  -  total flux cleaned = 0.000966686 Jy
! Component: 2900  -  total flux cleaned = 0.000959904 Jy
! Component: 2950  -  total flux cleaned = 0.000956539 Jy
! Component: 3000  -  total flux cleaned = 0.000942987 Jy
! Component: 3050  -  total flux cleaned = 0.000926051 Jy
! Component: 3100  -  total flux cleaned = 0.000905707 Jy
! Component: 3150  -  total flux cleaned = 0.000895505 Jy
! Component: 3200  -  total flux cleaned = 0.000878486 Jy
! Component: 3250  -  total flux cleaned = 0.000864861 Jy
! Component: 3300  -  total flux cleaned = 0.000847748 Jy
! Component: 3350  -  total flux cleaned = 0.000827183 Jy
! Component: 3400  -  total flux cleaned = 0.000806545 Jy
! Component: 3450  -  total flux cleaned = 0.00078929 Jy
! Component: 3500  -  total flux cleaned = 0.000765069 Jy
! Component: 3550  -  total flux cleaned = 0.000740756 Jy
! Component: 3600  -  total flux cleaned = 0.000723329 Jy
! Component: 3650  -  total flux cleaned = 0.00070237 Jy
! Component: 3700  -  total flux cleaned = 0.000667292 Jy
! Component: 3750  -  total flux cleaned = 0.00065671 Jy
! Component: 3800  -  total flux cleaned = 0.000635504 Jy
! Component: 3850  -  total flux cleaned = 0.000621336 Jy
! Component: 3900  -  total flux cleaned = 0.000596393 Jy
! Component: 3950  -  total flux cleaned = 0.000571317 Jy
! Component: 4000  -  total flux cleaned = 0.000549709 Jy
! Component: 4050  -  total flux cleaned = 0.000535225 Jy
! Total flux subtracted in 4096 components = 0.000517058 Jy
! Clean residual min=-0.000193 max=0.000203 Jy/beam
! Clean residual mean=-0.000004 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.015701 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 365 components and 0.0157009 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0617+5404_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.689 x 5.59 at 69.95 degrees (North through East)
! Clean map  min=-0.00064016  max=0.010102 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0617+5404_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0617+5404_C_a_map.mod
! Writing 365 model components to file: /vlbi/vcs9/uvm//J0617+5404_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0617+5404_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0617+5404_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0617+5404_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0617+5404_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0101024 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.90421e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.05026 2.05026 4.10052 8.20103 16.4021 32.8041 65.6083
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  146.323 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0617+5404_C_a_dfm.log closed on Tue Dec 26 21:46:05 2017