! Started logfile: /vlbi/vcs9/uvm//J0559+2353_C_a_dfm.log on Tue Dec 26 21:44:12 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0559+2353_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0559+2353_C_a_uvm.fits
! AN table 1: 19 integrations on 21 of 21 possible baselines.
! AN table 2: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.946514 visibilities/baseline/integration-bin.
! Found source: J0559+2353
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 67 lines of history.
! 
! Reading 7928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0559+2353_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.331305 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.043624Jy  sigma=34.769710
! Fit after  self-cal, rms=0.670507Jy  sigma=22.494519
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.423 mas, bmaj=4.009 mas, bpa=4.602 degrees
! Estimated noise=0.352073 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.28563 Jy
! Component: 100  -  total flux cleaned = 0.322886 Jy
! Total flux subtracted in 100 components = 0.322886 Jy
! Clean residual min=-0.005223 max=0.006247 Jy/beam
! Clean residual mean=0.000001 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 0.322886 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.322886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029345Jy  sigma=0.891646
! Fit after  self-cal, rms=0.029342Jy  sigma=0.891464
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.786 mas, bmaj=4.376 mas, bpa=6.625 degrees
! Estimated noise=0.237639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.7, 3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00810001 Jy
! Component: 100  -  total flux cleaned = 0.0102776 Jy
! Component: 150  -  total flux cleaned = 0.0110797 Jy
! Component: 200  -  total flux cleaned = 0.0116399 Jy
! Total flux subtracted in 200 components = 0.0116399 Jy
! Clean residual min=-0.003905 max=0.003106 Jy/beam
! Clean residual mean=0.000001 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.334526 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 27 components and 0.334526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027027Jy  sigma=0.822496
! Fit after  self-cal, rms=0.026923Jy  sigma=0.819435
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01614
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     KP        0.96     LA        0.95     
!   NL        0.98     OV        1.00     SC        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 1.03124
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        0.99     LA        0.99     
!   MK        0.95     NL        0.97     OV        0.96     PT        0.99     
!   SC        0.90     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01809
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        0.96     LA        0.98     
!   NL        0.98     OV        0.98     SC        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 1.01778
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     HN        1.00     LA        1.01     
!   MK        0.95     NL        1.00     OV        0.97     PT        0.99     
!   SC        0.89     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01833
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.96     LA        0.98     
!   NL        0.98     OV        0.97     SC        0.99     
! 
!  Amplitude normalization factor in sub-array 2: 1.00994
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     HN        1.02     LA        0.99     
!   MK        0.95     NL        0.99     OV        1.00     PT        1.00     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.01833
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        0.97     LA        0.97     
!   NL        0.98     OV        0.97     SC        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 1.0008
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.00     HN        1.03     LA        1.01     
!   MK        0.95     NL        1.04     OV        0.99     PT        1.00     
!   SC        0.94     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.00791
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.98     LA        0.99     
!   NL        1.00     OV        0.99     SC        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 0.994463
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.02     HN        1.03     LA        1.02     
!   MK        0.99     NL        1.00     OV        1.01     PT        1.00     
!   SC        0.93     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.00038
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        0.98     LA        0.99     
!   NL        1.01     OV        0.99     SC        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 0.987927
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.03     HN        1.04     LA        1.02     
!   MK        1.01     NL        1.01     OV        1.02     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.00297
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        0.98     LA        0.99     
!   NL        1.01     OV        0.99     SC        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 0.985802
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.03     HN        1.05     LA        1.02     
!   MK        1.01     NL        1.00     OV        1.02     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.99864
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        0.99     LA        1.00     
!   NL        1.02     OV        0.99     SC        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 0.981893
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.03     HN        1.04     LA        1.03     
!   MK        1.01     NL        1.01     OV        1.03     PT        1.02     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.026923Jy  sigma=0.819435
! Fit after  self-cal, rms=0.024314Jy  sigma=0.753128
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024314Jy  sigma=0.753128
! Fit after  self-cal, rms=0.024314Jy  sigma=0.753125
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.755 mas, bmaj=4.363 mas, bpa=7.111 degrees
! Estimated noise=0.238015 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293345 Jy
! Component: 100  -  total flux cleaned = 0.0046134 Jy
! Component: 150  -  total flux cleaned = 0.00564766 Jy
! Component: 200  -  total flux cleaned = 0.00600517 Jy
! Total flux subtracted in 200 components = 0.00600517 Jy
! Clean residual min=-0.002713 max=0.002104 Jy/beam
! Clean residual mean=0.000001 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.340531 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.340531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023904Jy  sigma=0.742373
! Fit after  self-cal, rms=0.023893Jy  sigma=0.742072
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023893Jy  sigma=0.742072
! Fit after  self-cal, rms=0.023892Jy  sigma=0.742058
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532312 Jy
! Component: 100  -  total flux cleaned = 0.000682801 Jy
! Component: 150  -  total flux cleaned = 0.000760438 Jy
! Component: 200  -  total flux cleaned = 0.000857106 Jy
! Total flux subtracted in 200 components = 0.000857106 Jy
! Clean residual min=-0.002747 max=0.002050 Jy/beam
! Clean residual mean=0.000001 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.341388 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 62 components and 0.341388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023824Jy  sigma=0.740328
! Fit after  self-cal, rms=0.023819Jy  sigma=0.740226
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.755 x 4.363 at 7.111 degrees (North through East)
! Clean map  min=-0.0026055  max=0.32808 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023819Jy  sigma=0.740226
! Fit after  self-cal, rms=0.021669Jy  sigma=0.677731
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021669Jy  sigma=0.677731
! Fit after  self-cal, rms=0.021669Jy  sigma=0.677728
! Inverting map and beam 
! Estimated beam: bmin=1.751 mas, bmaj=4.373 mas, bpa=7.171 degrees
! Estimated noise=0.237846 mJy/beam.
! Added new window around map position (-11.1, 11.1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143695 Jy
! Component: 100  -  total flux cleaned = 0.00192814 Jy
! Component: 150  -  total flux cleaned = 0.00220678 Jy
! Component: 200  -  total flux cleaned = 0.00244545 Jy
! Total flux subtracted in 200 components = 0.00244545 Jy
! Clean residual min=-0.000902 max=0.001128 Jy/beam
! Clean residual mean=-0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.343834 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.343834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021559Jy  sigma=0.674186
! Fit after  self-cal, rms=0.021553Jy  sigma=0.674007
! Inverting map 
! Added new window around map position (-11.1, -62.1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000728388 Jy
! Component: 100  -  total flux cleaned = 0.000930505 Jy
! Component: 150  -  total flux cleaned = 0.00120986 Jy
! Component: 200  -  total flux cleaned = 0.00139131 Jy
! Total flux subtracted in 200 components = 0.00139131 Jy
! Clean residual min=-0.000854 max=0.001000 Jy/beam
! Clean residual mean=-0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.345225 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.345225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021478Jy  sigma=0.671739
! Fit after  self-cal, rms=0.021476Jy  sigma=0.671650
! Inverting map 
! Added new window around map position (39.6, -74.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989402 Jy
! Component: 100  -  total flux cleaned = 0.00134812 Jy
! Component: 150  -  total flux cleaned = 0.00154825 Jy
! Component: 200  -  total flux cleaned = 0.00167751 Jy
! Total flux subtracted in 200 components = 0.00167751 Jy
! Clean residual min=-0.000828 max=0.000857 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.346903 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 125 components and 0.346903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021432Jy  sigma=0.670097
! Fit after  self-cal, rms=0.021430Jy  sigma=0.670045
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.41 mas, bmaj=4.006 mas, bpa=4.92 degrees
! Estimated noise=0.350394 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.284264 Jy
! Component: 100  -  total flux cleaned = 0.321342 Jy
! Component: 150  -  total flux cleaned = 0.32917 Jy
! Component: 200  -  total flux cleaned = 0.332985 Jy
! Total flux subtracted in 200 components = 0.332985 Jy
! Clean residual min=-0.001879 max=0.001620 Jy/beam
! Clean residual mean=0.000000 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.332985 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.332985 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.751 mas, bmaj=4.373 mas, bpa=7.171 degrees
! Estimated noise=0.237846 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336272 Jy
! Component: 100  -  total flux cleaned = 0.00501697 Jy
! Component: 150  -  total flux cleaned = 0.00641888 Jy
! Component: 200  -  total flux cleaned = 0.00753475 Jy
! Total flux subtracted in 200 components = 0.00753475 Jy
! Clean residual min=-0.001077 max=0.001132 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.34052 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 48 components and 0.34052 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100301 Jy
! Component: 100  -  total flux cleaned = 0.00183801 Jy
! Component: 150  -  total flux cleaned = 0.0023916 Jy
! Component: 200  -  total flux cleaned = 0.00292984 Jy
! Total flux subtracted in 200 components = 0.00292984 Jy
! Clean residual min=-0.000979 max=0.000983 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.34345 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 76 components and 0.34345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021533Jy  sigma=0.673367
! Fit after  self-cal, rms=0.021531Jy  sigma=0.673253
wmodel J0559+2353_C_map.mod
! Writing 76 model components to file: J0559+2353_C_map.mod
wobs   J0559+2353_C_uvs.fits
! Writing UV FITS file: J0559+2353_C_uvs.fits
wwins  J0559+2353_C_map.win
! wwins: Wrote 5 windows to J0559+2353_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.44457e-05 Jy
! Component: 100  -  total flux cleaned = 0.00021698 Jy
! Component: 150  -  total flux cleaned = 0.000325494 Jy
! Component: 200  -  total flux cleaned = 0.000384198 Jy
! Component: 250  -  total flux cleaned = 0.00037037 Jy
! Component: 300  -  total flux cleaned = 0.000316555 Jy
! Component: 350  -  total flux cleaned = 0.000290458 Jy
! Component: 400  -  total flux cleaned = 0.00026476 Jy
! Component: 450  -  total flux cleaned = 0.000240166 Jy
! Component: 500  -  total flux cleaned = 0.000204467 Jy
! Component: 550  -  total flux cleaned = 0.000169296 Jy
! Component: 600  -  total flux cleaned = 0.000135173 Jy
! Component: 650  -  total flux cleaned = 0.000123909 Jy
! Component: 700  -  total flux cleaned = 0.000102142 Jy
! Component: 750  -  total flux cleaned = -3.87997e-06 Jy
! Component: 800  -  total flux cleaned = -3.5751e-06 Jy
! Component: 850  -  total flux cleaned = -8.52764e-05 Jy
! Component: 900  -  total flux cleaned = -8.53446e-05 Jy
! Component: 950  -  total flux cleaned = -0.000124695 Jy
! Component: 1000  -  total flux cleaned = -0.000182263 Jy
! Component: 1050  -  total flux cleaned = -0.000172727 Jy
! Component: 1100  -  total flux cleaned = -0.000228648 Jy
! Component: 1150  -  total flux cleaned = -0.000247095 Jy
! Component: 1200  -  total flux cleaned = -0.000319625 Jy
! Component: 1250  -  total flux cleaned = -0.000328513 Jy
! Component: 1300  -  total flux cleaned = -0.000363743 Jy
! Component: 1350  -  total flux cleaned = -0.00042435 Jy
! Component: 1400  -  total flux cleaned = -0.000466809 Jy
! Component: 1450  -  total flux cleaned = -0.00050883 Jy
! Component: 1500  -  total flux cleaned = -0.000550434 Jy
! Component: 1550  -  total flux cleaned = -0.000591425 Jy
! Component: 1600  -  total flux cleaned = -0.000615728 Jy
! Component: 1650  -  total flux cleaned = -0.000679392 Jy
! Component: 1700  -  total flux cleaned = -0.000718663 Jy
! Component: 1750  -  total flux cleaned = -0.000765226 Jy
! Component: 1800  -  total flux cleaned = -0.000803488 Jy
! Component: 1850  -  total flux cleaned = -0.000841236 Jy
! Component: 1900  -  total flux cleaned = -0.000856164 Jy
! Component: 1950  -  total flux cleaned = -0.000900528 Jy
! Component: 2000  -  total flux cleaned = -0.000958819 Jy
! Component: 2050  -  total flux cleaned = -0.000994808 Jy
! Component: 2100  -  total flux cleaned = -0.00103028 Jy
! Component: 2150  -  total flux cleaned = -0.00109369 Jy
! Component: 2200  -  total flux cleaned = -0.00112837 Jy
! Component: 2250  -  total flux cleaned = -0.00116284 Jy
! Component: 2300  -  total flux cleaned = -0.00120366 Jy
! Component: 2350  -  total flux cleaned = -0.00123735 Jy
! Component: 2400  -  total flux cleaned = -0.00130388 Jy
! Component: 2450  -  total flux cleaned = -0.00131704 Jy
! Component: 2500  -  total flux cleaned = -0.00133668 Jy
! Component: 2550  -  total flux cleaned = -0.00137547 Jy
! Component: 2600  -  total flux cleaned = -0.00143301 Jy
! Component: 2650  -  total flux cleaned = -0.00148367 Jy
! Component: 2700  -  total flux cleaned = -0.00152123 Jy
! Component: 2750  -  total flux cleaned = -0.00154614 Jy
! Component: 2800  -  total flux cleaned = -0.00160162 Jy
! Component: 2850  -  total flux cleaned = -0.00161997 Jy
! Component: 2900  -  total flux cleaned = -0.00165621 Jy
! Component: 2950  -  total flux cleaned = -0.00169209 Jy
! Component: 3000  -  total flux cleaned = -0.0017336 Jy
! Component: 3050  -  total flux cleaned = -0.00172182 Jy
! Component: 3100  -  total flux cleaned = -0.00176851 Jy
! Component: 3150  -  total flux cleaned = -0.00176278 Jy
! Component: 3200  -  total flux cleaned = -0.00178005 Jy
! Component: 3250  -  total flux cleaned = -0.00180278 Jy
! Component: 3300  -  total flux cleaned = -0.00183659 Jy
! Component: 3350  -  total flux cleaned = -0.00184221 Jy
! Component: 3400  -  total flux cleaned = -0.0018644 Jy
! Component: 3450  -  total flux cleaned = -0.00188092 Jy
! Component: 3500  -  total flux cleaned = -0.00191355 Jy
! Component: 3550  -  total flux cleaned = -0.00192435 Jy
! Component: 3600  -  total flux cleaned = -0.00195114 Jy
! Component: 3650  -  total flux cleaned = -0.0019671 Jy
! Component: 3700  -  total flux cleaned = -0.00198829 Jy
! Component: 3750  -  total flux cleaned = -0.00200928 Jy
! Component: 3800  -  total flux cleaned = -0.0020301 Jy
! Component: 3850  -  total flux cleaned = -0.00206109 Jy
! Component: 3900  -  total flux cleaned = -0.00207648 Jy
! Component: 3950  -  total flux cleaned = -0.00209684 Jy
! Component: 4000  -  total flux cleaned = -0.00211709 Jy
! Component: 4050  -  total flux cleaned = -0.00213719 Jy
! Total flux subtracted in 4096 components = -0.0021521 Jy
! Clean residual min=-0.000303 max=0.000288 Jy/beam
! Clean residual mean=-0.000000 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.341298 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 390 components and 0.341298 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0559+2353_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.751 x 4.373 at 7.171 degrees (North through East)
! Clean map  min=-0.00069818  max=0.32771 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0559+2353_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0559+2353_C_a_map.mod
! Writing 390 model components to file: /vlbi/vcs9/uvm//J0559+2353_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0559+2353_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0559+2353_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0559+2353_C_a_map.win
! wwins: Wrote 6 windows to /vlbi/vcs9/uvm//J0559+2353_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.327709 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.20453e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0842625 0.0842625 0.168525 0.33705 0.6741 1.3482 2.6964 5.3928 10.7856 21.5712 43.1424 86.2848
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.327 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3560.3 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0559+2353_C_a_dfm.log closed on Tue Dec 26 21:44:16 2017