! Started logfile: /vlbi/vcs9/uvm//J0541-0541_X_b_dfm.log on Tue Dec 26 21:43:07 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0541-0541_X_b_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0541-0541_X_b_uvm.fits ! AN table 1: 25 integrations on 21 of 21 possible baselines. ! AN table 2: 23 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.901786 visibilities/baseline/integration-bin. ! Found source: J0541-0541 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 67 lines of history. ! ! Reading 7272 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0541-0541_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.589727 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.150004Jy sigma=24.141157 ! Fit after self-cal, rms=0.516942Jy sigma=11.125625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=3.066 mas, bpa=19.24 degrees ! Estimated noise=0.688646 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.458374 Jy ! Component: 100 - total flux cleaned = 0.539921 Jy ! Total flux subtracted in 100 components = 0.539921 Jy ! Clean residual min=-0.038667 max=0.087258 Jy/beam ! Clean residual mean=-0.000054 rms=0.015903 Jy/beam ! Combined flux in latest and established models = 0.539921 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.539921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.231477Jy sigma=4.960165 ! Fit after self-cal, rms=0.231449Jy sigma=4.959000 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.355 mas, bmaj=3.439 mas, bpa=17.22 degrees ! Estimated noise=0.391977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.8, 17.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106929 Jy ! Component: 100 - total flux cleaned = 0.148825 Jy ! Component: 150 - total flux cleaned = 0.172914 Jy ! Component: 200 - total flux cleaned = 0.191123 Jy ! Total flux subtracted in 200 components = 0.191123 Jy ! Clean residual min=-0.038256 max=0.063211 Jy/beam ! Clean residual mean=-0.000035 rms=0.012043 Jy/beam ! Combined flux in latest and established models = 0.731044 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 62 components and 0.731045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190555Jy sigma=4.162262 ! Fit after self-cal, rms=0.186041Jy sigma=4.066344 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05964 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.65 HN 0.98 KP 0.95 ! NL 0.94 OV 0.99 SC 1.12 ! ! Amplitude normalization factor in sub-array 2: 0.113756 ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 55.81 HN 0.98 KP 0.96 ! LA 0.93 NL 0.94 OV 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05808 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.63 HN 1.00 KP 0.94 ! NL 0.95 OV 1.00 SC 1.11 ! ! Amplitude normalization factor in sub-array 2: 0.110914 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 57.40 HN 0.98 KP 0.95 ! LA 0.93 NL 0.95 OV 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05331 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.63 HN 1.00 KP 0.95 ! NL 0.95 OV 1.00 SC 1.12 ! ! Amplitude normalization factor in sub-array 2: 0.135708 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 45.82 HN 0.98 KP 0.96 ! LA 0.91 NL 0.96 OV 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04514 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.64 HN 1.00 KP 0.95 ! NL 0.97 OV 1.00 SC 1.14 ! ! Amplitude normalization factor in sub-array 2: 0.169003 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 35.61 HN 0.98 KP 0.97 ! LA 0.93 NL 0.97 OV 0.97 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03321 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.66 HN 0.99 KP 0.96 ! NL 0.99 OV 1.01 SC 1.13 ! ! Amplitude normalization factor in sub-array 2: 0.153538 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 39.81 HN 0.95 KP 0.94 ! LA 0.92 NL 1.00 OV 0.97 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03215 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.67 HN 0.98 KP 0.95 ! NL 0.99 OV 1.02 SC 1.14 ! ! Amplitude normalization factor in sub-array 2: 0.0807583 ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 80.91 HN 0.96 KP 0.96 ! LA 0.91 NL 0.99 OV 0.97 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03133 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.69 HN 0.98 KP 0.94 ! NL 0.99 OV 1.01 SC 1.13 ! ! Amplitude normalization factor in sub-array 2: 0.162663 ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 37.27 HN 0.95 KP 0.95 ! LA 0.91 NL 0.98 OV 0.97 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03244 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.71 HN 0.97 KP 0.93 ! NL 0.98 OV 1.02 SC 1.13 ! ! Amplitude normalization factor in sub-array 2: 0.177148 ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 33.74 HN 0.95 KP 0.96 ! LA 0.91 NL 1.00 OV 0.96 ! ! ! Fit before self-cal, rms=0.186041Jy sigma=4.066344 ! Fit after self-cal, rms=0.399372Jy sigma=610.578619 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.399372Jy sigma=610.578619 ! Fit after self-cal, rms=0.399440Jy sigma=610.578696 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.687 mas, bmaj=4.379 mas, bpa=0.7984 degrees ! Estimated noise=0.00836835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.532549 Jy ! Component: 100 - total flux cleaned = -0.628715 Jy ! Component: 150 - total flux cleaned = -0.665697 Jy ! Component: 200 - total flux cleaned = -0.682465 Jy ! Total flux subtracted in 200 components = -0.682465 Jy ! Clean residual min=-0.010046 max=0.010579 Jy/beam ! Clean residual mean=0.000004 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 0.0485798 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 89 components and 0.0485797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.422737Jy sigma=21.211947 ! Fit after self-cal, rms=0.398393Jy sigma=19.755670 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.398393Jy sigma=19.755670 ! Fit after self-cal, rms=0.398264Jy sigma=19.753780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00806991 Jy ! Component: 100 - total flux cleaned = -0.0133885 Jy ! Component: 150 - total flux cleaned = -0.0178497 Jy ! Component: 200 - total flux cleaned = -0.0211262 Jy ! Total flux subtracted in 200 components = -0.0211262 Jy ! Clean residual min=-0.003343 max=0.004135 Jy/beam ! Clean residual mean=-0.000000 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.0274535 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 117 components and 0.0274535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.402255Jy sigma=12.447370 ! Fit after self-cal, rms=0.401614Jy sigma=12.351821 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.687 x 4.379 at 0.7984 degrees (North through East) ! Clean map min=-0.011471 max=0.01253 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.456 mas, bmaj=4.253 mas, bpa=0.6334 degrees ! Estimated noise=0.0303721 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136874 Jy ! Component: 100 - total flux cleaned = 0.0134154 Jy ! Component: 150 - total flux cleaned = 0.0131409 Jy ! Component: 200 - total flux cleaned = 0.0136238 Jy ! Total flux subtracted in 200 components = 0.0136238 Jy ! Clean residual min=-0.006290 max=0.009082 Jy/beam ! Clean residual mean=-0.000000 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.0136238 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0136238 Jy ! Inverting map and beam ! Estimated beam: bmin=1.687 mas, bmaj=4.379 mas, bpa=0.7984 degrees ! Estimated noise=0.00836835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00434601 Jy ! Component: 100 - total flux cleaned = -0.00391378 Jy ! Component: 150 - total flux cleaned = -0.00332389 Jy ! Component: 200 - total flux cleaned = -0.00307327 Jy ! Total flux subtracted in 200 components = -0.00307327 Jy ! Clean residual min=-0.001771 max=0.001588 Jy/beam ! Clean residual mean=-0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0105506 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.0105506 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218914 Jy ! Component: 100 - total flux cleaned = 0.000373838 Jy ! Component: 150 - total flux cleaned = 0.000577337 Jy ! Component: 200 - total flux cleaned = 0.000724816 Jy ! Total flux subtracted in 200 components = 0.000724816 Jy ! Clean residual min=-0.001532 max=0.001305 Jy/beam ! Clean residual mean=-0.000000 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0112754 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.0112754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.408677Jy sigma=10.613327 ! Fit after self-cal, rms=0.407346Jy sigma=10.441274 wmodel J0541-0541_X_map.mod ! Writing 63 model components to file: J0541-0541_X_map.mod wobs J0541-0541_X_uvs.fits ! Writing UV FITS file: J0541-0541_X_uvs.fits wwins J0541-0541_X_map.win ! wwins: Wrote 2 windows to J0541-0541_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384419 Jy ! Component: 100 - total flux cleaned = -0.000345024 Jy ! Component: 150 - total flux cleaned = -0.000380648 Jy ! Component: 200 - total flux cleaned = -0.000411598 Jy ! Component: 250 - total flux cleaned = -0.000427318 Jy ! Component: 300 - total flux cleaned = -0.000428255 Jy ! Component: 350 - total flux cleaned = -0.000368251 Jy ! Component: 400 - total flux cleaned = -0.000334551 Jy ! Component: 450 - total flux cleaned = -0.00029202 Jy ! Component: 500 - total flux cleaned = -0.000301903 Jy ! Component: 550 - total flux cleaned = -0.000292175 Jy ! Component: 600 - total flux cleaned = -0.000319257 Jy ! Component: 650 - total flux cleaned = -0.000318939 Jy ! Component: 700 - total flux cleaned = -0.00033498 Jy ! Component: 750 - total flux cleaned = -0.000350626 Jy ! Component: 800 - total flux cleaned = -0.000358044 Jy ! Component: 850 - total flux cleaned = -0.000372435 Jy ! Component: 900 - total flux cleaned = -0.000379377 Jy ! Component: 950 - total flux cleaned = -0.000392747 Jy ! Component: 1000 - total flux cleaned = -0.000399313 Jy ! Component: 1050 - total flux cleaned = -0.000424458 Jy ! Component: 1100 - total flux cleaned = -0.000424437 Jy ! Component: 1150 - total flux cleaned = -0.000442227 Jy ! Component: 1200 - total flux cleaned = -0.000453857 Jy ! Component: 1250 - total flux cleaned = -0.000459498 Jy ! Component: 1300 - total flux cleaned = -0.000481978 Jy ! Component: 1350 - total flux cleaned = -0.000509557 Jy ! Component: 1400 - total flux cleaned = -0.000525909 Jy ! Component: 1450 - total flux cleaned = -0.000547505 Jy ! Component: 1500 - total flux cleaned = -0.000574217 Jy ! Component: 1550 - total flux cleaned = -0.000595378 Jy ! Component: 1600 - total flux cleaned = -0.000621561 Jy ! Component: 1650 - total flux cleaned = -0.000631965 Jy ! Component: 1700 - total flux cleaned = -0.000642339 Jy ! Component: 1750 - total flux cleaned = -0.000662898 Jy ! Component: 1800 - total flux cleaned = -0.000678249 Jy ! Component: 1850 - total flux cleaned = -0.000698669 Jy ! Component: 1900 - total flux cleaned = -0.00071896 Jy ! Component: 1950 - total flux cleaned = -0.000729066 Jy ! Component: 2000 - total flux cleaned = -0.000749256 Jy ! Component: 2050 - total flux cleaned = -0.000759351 Jy ! Component: 2100 - total flux cleaned = -0.000789642 Jy ! Component: 2150 - total flux cleaned = -0.000814933 Jy ! Component: 2200 - total flux cleaned = -0.000830115 Jy ! Component: 2250 - total flux cleaned = -0.00085556 Jy ! Component: 2300 - total flux cleaned = -0.000876013 Jy ! Component: 2350 - total flux cleaned = -0.000901666 Jy ! Component: 2400 - total flux cleaned = -0.000911963 Jy ! Component: 2450 - total flux cleaned = -0.000932659 Jy ! Component: 2500 - total flux cleaned = -0.000937864 Jy ! Component: 2550 - total flux cleaned = -0.000948311 Jy ! Component: 2600 - total flux cleaned = -0.000953624 Jy ! Component: 2650 - total flux cleaned = -0.000969552 Jy ! Component: 2700 - total flux cleaned = -0.000974928 Jy ! Component: 2750 - total flux cleaned = -0.000980288 Jy ! Component: 2800 - total flux cleaned = -0.000996546 Jy ! Component: 2850 - total flux cleaned = -0.00101849 Jy ! Component: 2900 - total flux cleaned = -0.00103509 Jy ! Component: 2950 - total flux cleaned = -0.00105184 Jy ! Component: 3000 - total flux cleaned = -0.00106316 Jy ! Component: 3050 - total flux cleaned = -0.0010746 Jy ! Component: 3100 - total flux cleaned = -0.00108035 Jy ! Component: 3150 - total flux cleaned = -0.00108624 Jy ! Component: 3200 - total flux cleaned = -0.00108626 Jy ! Component: 3250 - total flux cleaned = -0.00108621 Jy ! Component: 3300 - total flux cleaned = -0.00109233 Jy ! Component: 3350 - total flux cleaned = -0.00108601 Jy ! Component: 3400 - total flux cleaned = -0.00109242 Jy ! Component: 3450 - total flux cleaned = -0.00108601 Jy ! Component: 3500 - total flux cleaned = -0.00108598 Jy ! Component: 3550 - total flux cleaned = -0.00107917 Jy ! Component: 3600 - total flux cleaned = -0.00109285 Jy ! Component: 3650 - total flux cleaned = -0.00109305 Jy ! Component: 3700 - total flux cleaned = -0.00108602 Jy ! Component: 3750 - total flux cleaned = -0.00107158 Jy ! Component: 3800 - total flux cleaned = -0.00106432 Jy ! Component: 3850 - total flux cleaned = -0.00104918 Jy ! Component: 3900 - total flux cleaned = -0.00104148 Jy ! Component: 3950 - total flux cleaned = -0.00104159 Jy ! Component: 4000 - total flux cleaned = -0.00101729 Jy ! Component: 4050 - total flux cleaned = -0.00100054 Jy ! Total flux subtracted in 4096 components = -0.00099194 Jy ! Clean residual min=-0.000571 max=0.000488 Jy/beam ! Clean residual mean=0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0102834 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 285 components and 0.0102834 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0541-0541_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.687 x 4.379 at 0.7984 degrees (North through East) ! Clean map min=-0.0029663 max=0.0065291 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0541-0541_X_b_map.fits wmodel /vlbi/vcs9/uvm//J0541-0541_X_b_map.mod ! Writing 285 model components to file: /vlbi/vcs9/uvm//J0541-0541_X_b_map.mod wobs /vlbi/vcs9/uvm//J0541-0541_X_b_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0541-0541_X_b_uvs.fits wwins /vlbi/vcs9/uvm//J0541-0541_X_b_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0541-0541_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00652909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.06742 5.06742 10.1348 20.2697 40.5394 81.0788 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.006 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 59.201 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0541-0541_X_b_dfm.log closed on Tue Dec 26 21:43:10 2017