! Started logfile: /vlbi/vcs9/uvm//J0443+1909_X_a_dfm.log on Tue Dec 26 21:37:16 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0443+1909_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0443+1909_X_a_uvm.fits ! AN table 1: 46 integrations on 15 of 15 possible baselines. ! AN table 2: 52 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.975303 visibilities/baseline/integration-bin. ! Found source: J0443+1909 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 16744 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0443+1909_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0400621 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002240Jy sigma=24.406011 ! Fit after self-cal, rms=0.976333Jy sigma=23.765307 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=3.115 mas, bpa=-6.891 degrees ! Estimated noise=0.472283 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206056 Jy ! Component: 100 - total flux cleaned = 0.024169 Jy ! Total flux subtracted in 100 components = 0.024169 Jy ! Clean residual min=-0.001419 max=0.001630 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.024169 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.024169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031885Jy sigma=0.724810 ! Fit after self-cal, rms=0.031858Jy sigma=0.724192 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.415 mas, bmaj=3.132 mas, bpa=-5.763 degrees ! Estimated noise=0.224455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.2, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192509 Jy ! Component: 100 - total flux cleaned = 0.00200733 Jy ! Component: 150 - total flux cleaned = 0.00183699 Jy ! Component: 200 - total flux cleaned = 0.00177682 Jy ! Total flux subtracted in 200 components = 0.00177682 Jy ! Clean residual min=-0.000745 max=0.001028 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.0259458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.0259458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031781Jy sigma=0.722028 ! Fit after self-cal, rms=0.031774Jy sigma=0.721875 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.991029 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 KP 0.90 LA 1.10 ! NL 1.03 OV 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.966609 ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.91 HN 1.17 LA 1.08 ! MK 1.32 NL 0.96 OV 0.85 PT 1.08 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983625 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 KP 0.93 LA 1.12 ! NL 1.09 OV 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02935 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 1.00 LA 0.89 ! MK 1.01 NL 1.03 OV 0.93 PT 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.961496 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 KP 0.99 LA 0.92 ! NL 1.01 OV 1.17 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00832 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.05 LA 1.09 ! MK 1.11 NL 0.91 OV 0.88 PT 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97528 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 KP 1.10 LA 0.95 ! NL 1.03 OV 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.968192 ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.06 HN 0.90 LA 0.99 ! MK 1.05 NL 1.00 OV 1.02 PT 1.16 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.984936 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 KP 0.96 LA 1.10 ! NL 1.04 OV 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00468 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.94 HN 0.89 LA 1.00 ! MK 1.12 NL 0.84 OV 1.09 PT 1.14 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.95988 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 KP 1.14 LA 1.20 ! NL 0.96 OV 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.990971 ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.16 HN 0.89 LA 1.08 ! MK 0.93 NL 0.97 OV 1.03 PT 0.98 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.00181 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 KP 0.89 LA 1.02 ! NL 1.02 OV 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00344 ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.02 HN 1.06 LA 0.99 ! MK 1.03 NL 0.98 OV 1.04 PT 0.95 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.0066 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 KP 0.91 LA 1.06 ! NL 0.98 OV 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.04213 ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.03 HN 0.90 LA 1.06 ! MK 0.98 NL 0.89 OV 0.91 PT 1.05 ! ! ! Fit before self-cal, rms=0.031774Jy sigma=0.721875 ! Fit after self-cal, rms=0.032083Jy sigma=0.719494 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032083Jy sigma=0.719494 ! Fit after self-cal, rms=0.032085Jy sigma=0.719487 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.435 mas, bmaj=3.108 mas, bpa=-5.291 degrees ! Estimated noise=0.218989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.08515e-05 Jy ! Component: 100 - total flux cleaned = -6.13205e-05 Jy ! Component: 150 - total flux cleaned = -8.22826e-05 Jy ! Component: 200 - total flux cleaned = -9.18969e-05 Jy ! Total flux subtracted in 200 components = -9.18969e-05 Jy ! Clean residual min=-0.000598 max=0.000600 Jy/beam ! Clean residual mean=-0.000001 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0258539 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 73 components and 0.0258539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032080Jy sigma=0.719299 ! Fit after self-cal, rms=0.032079Jy sigma=0.719298 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032079Jy sigma=0.719298 ! Fit after self-cal, rms=0.032027Jy sigma=0.717983 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.55971e-05 Jy ! Component: 100 - total flux cleaned = -5.78918e-05 Jy ! Component: 150 - total flux cleaned = -6.45457e-05 Jy ! Component: 200 - total flux cleaned = -5.86604e-05 Jy ! Total flux subtracted in 200 components = -5.86604e-05 Jy ! Clean residual min=-0.000593 max=0.000564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0257953 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 0.0257953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032025Jy sigma=0.717928 ! Fit after self-cal, rms=0.032021Jy sigma=0.717819 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.435 x 3.108 at -5.291 degrees (North through East) ! Clean map min=-0.00056739 max=0.023604 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.109 mas, bmaj=3.1 mas, bpa=-6.725 degrees ! Estimated noise=0.467445 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203875 Jy ! Component: 100 - total flux cleaned = 0.0240919 Jy ! Component: 150 - total flux cleaned = 0.0256185 Jy ! Component: 200 - total flux cleaned = 0.0264604 Jy ! Total flux subtracted in 200 components = 0.0264604 Jy ! Clean residual min=-0.001052 max=0.000989 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0264604 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0264604 Jy ! Inverting map and beam ! Estimated beam: bmin=1.435 mas, bmaj=3.108 mas, bpa=-5.291 degrees ! Estimated noise=0.218989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346441 Jy ! Component: 100 - total flux cleaned = -0.000472941 Jy ! Component: 150 - total flux cleaned = -0.000543554 Jy ! Component: 200 - total flux cleaned = -0.000592795 Jy ! Total flux subtracted in 200 components = -0.000592795 Jy ! Clean residual min=-0.000601 max=0.000585 Jy/beam ! Clean residual mean=-0.000001 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0258676 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 51 components and 0.0258676 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.11822e-05 Jy ! Component: 100 - total flux cleaned = -4.78279e-05 Jy ! Component: 150 - total flux cleaned = -6.25124e-05 Jy ! Component: 200 - total flux cleaned = -5.52031e-05 Jy ! Total flux subtracted in 200 components = -5.52031e-05 Jy ! Clean residual min=-0.000594 max=0.000564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0258124 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.0258124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032021Jy sigma=0.717822 ! Fit after self-cal, rms=0.032021Jy sigma=0.717813 wmodel J0443+1909_X_map.mod ! Writing 67 model components to file: J0443+1909_X_map.mod wobs J0443+1909_X_uvs.fits ! Writing UV FITS file: J0443+1909_X_uvs.fits wwins J0443+1909_X_map.win ! wwins: Wrote 2 windows to J0443+1909_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.86183e-05 Jy ! Component: 100 - total flux cleaned = 0.000183409 Jy ! Component: 150 - total flux cleaned = 0.000272914 Jy ! Component: 200 - total flux cleaned = 0.000315825 Jy ! Component: 250 - total flux cleaned = 0.000372402 Jy ! Component: 300 - total flux cleaned = 0.000411154 Jy ! Component: 350 - total flux cleaned = 0.000463294 Jy ! Component: 400 - total flux cleaned = 0.000513551 Jy ! Component: 450 - total flux cleaned = 0.000534488 Jy ! Component: 500 - total flux cleaned = 0.000568276 Jy ! Component: 550 - total flux cleaned = 0.000581491 Jy ! Component: 600 - total flux cleaned = 0.00060086 Jy ! Component: 650 - total flux cleaned = 0.000613342 Jy ! Component: 700 - total flux cleaned = 0.00063746 Jy ! Component: 750 - total flux cleaned = 0.000619753 Jy ! Component: 800 - total flux cleaned = 0.000643005 Jy ! Component: 850 - total flux cleaned = 0.000660036 Jy ! Component: 900 - total flux cleaned = 0.000671001 Jy ! Component: 950 - total flux cleaned = 0.000660016 Jy ! Component: 1000 - total flux cleaned = 0.000665373 Jy ! Component: 1050 - total flux cleaned = 0.000675893 Jy ! Component: 1100 - total flux cleaned = 0.000670715 Jy ! Component: 1150 - total flux cleaned = 0.000701047 Jy ! Component: 1200 - total flux cleaned = 0.000676126 Jy ! Component: 1250 - total flux cleaned = 0.000685946 Jy ! Component: 1300 - total flux cleaned = 0.000666624 Jy ! Component: 1350 - total flux cleaned = 0.00066192 Jy ! Component: 1400 - total flux cleaned = 0.000652564 Jy ! Component: 1450 - total flux cleaned = 0.000643355 Jy ! Component: 1500 - total flux cleaned = 0.000652479 Jy ! Component: 1550 - total flux cleaned = 0.000643579 Jy ! Component: 1600 - total flux cleaned = 0.000661422 Jy ! Component: 1650 - total flux cleaned = 0.00066578 Jy ! Component: 1700 - total flux cleaned = 0.000678716 Jy ! Component: 1750 - total flux cleaned = 0.000682941 Jy ! Component: 1800 - total flux cleaned = 0.000691317 Jy ! Component: 1850 - total flux cleaned = 0.000691312 Jy ! Component: 1900 - total flux cleaned = 0.000695427 Jy ! Component: 1950 - total flux cleaned = 0.000699528 Jy ! Component: 2000 - total flux cleaned = 0.000707581 Jy ! Component: 2050 - total flux cleaned = 0.000719398 Jy ! Component: 2100 - total flux cleaned = 0.000727117 Jy ! Component: 2150 - total flux cleaned = 0.000723171 Jy ! Component: 2200 - total flux cleaned = 0.00074225 Jy ! Component: 2250 - total flux cleaned = 0.000727081 Jy ! Component: 2300 - total flux cleaned = 0.000730854 Jy ! Component: 2350 - total flux cleaned = 0.000723405 Jy ! Component: 2400 - total flux cleaned = 0.000727085 Jy ! Component: 2450 - total flux cleaned = 0.000723439 Jy ! Component: 2500 - total flux cleaned = 0.00071267 Jy ! Component: 2550 - total flux cleaned = 0.000712671 Jy ! Component: 2600 - total flux cleaned = 0.00071619 Jy ! Component: 2650 - total flux cleaned = 0.000684708 Jy ! Component: 2700 - total flux cleaned = 0.000688179 Jy ! Component: 2750 - total flux cleaned = 0.000677866 Jy ! Component: 2800 - total flux cleaned = 0.000664264 Jy ! Component: 2850 - total flux cleaned = 0.000647388 Jy ! Component: 2900 - total flux cleaned = 0.000644065 Jy ! Component: 2950 - total flux cleaned = 0.000637393 Jy ! Component: 3000 - total flux cleaned = 0.000637338 Jy ! Component: 3050 - total flux cleaned = 0.000624252 Jy ! Component: 3100 - total flux cleaned = 0.000611299 Jy ! Component: 3150 - total flux cleaned = 0.000608099 Jy ! Component: 3200 - total flux cleaned = 0.000608111 Jy ! Component: 3250 - total flux cleaned = 0.000604877 Jy ! Component: 3300 - total flux cleaned = 0.000604866 Jy ! Component: 3350 - total flux cleaned = 0.000598652 Jy ! Component: 3400 - total flux cleaned = 0.000607981 Jy ! Component: 3450 - total flux cleaned = 0.00060797 Jy ! Component: 3500 - total flux cleaned = 0.000604897 Jy ! Component: 3550 - total flux cleaned = 0.000601874 Jy ! Component: 3600 - total flux cleaned = 0.000604891 Jy ! Component: 3650 - total flux cleaned = 0.000598904 Jy ! Component: 3700 - total flux cleaned = 0.000592963 Jy ! Component: 3750 - total flux cleaned = 0.000595929 Jy ! Component: 3800 - total flux cleaned = 0.000587089 Jy ! Component: 3850 - total flux cleaned = 0.000590024 Jy ! Component: 3900 - total flux cleaned = 0.000590037 Jy ! Component: 3950 - total flux cleaned = 0.000595838 Jy ! Component: 4000 - total flux cleaned = 0.000590091 Jy ! Component: 4050 - total flux cleaned = 0.000592963 Jy ! Total flux subtracted in 4096 components = 0.000595827 Jy ! Clean residual min=-0.000218 max=0.000175 Jy/beam ! Clean residual mean=-0.000000 rms=0.000051 Jy/beam ! Combined flux in latest and established models = 0.0264083 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 356 components and 0.0264083 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0443+1909_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.435 x 3.108 at -5.291 degrees (North through East) ! Clean map min=-0.00040667 max=0.023563 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0443+1909_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0443+1909_X_a_map.mod ! Writing 356 model components to file: /vlbi/vcs9/uvm//J0443+1909_X_a_map.mod wobs /vlbi/vcs9/uvm//J0443+1909_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0443+1909_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0443+1909_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0443+1909_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0235627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.0261e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.639922 0.639922 1.27984 2.55969 5.11937 10.2387 20.4775 40.955 81.91 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.023 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 468.807 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0443+1909_X_a_dfm.log closed on Tue Dec 26 21:37:20 2017