! Started logfile: /vlbi/vcs9/uvm//J0440-2459_X_a_dfm.log on Tue Dec 26 21:37:05 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0440-2459_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0440-2459_X_a_uvm.fits ! AN table 1: 91 integrations on 28 of 28 possible baselines. ! AN table 2: 103 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.939352 visibilities/baseline/integration-bin. ! Found source: J0440-2459 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 26888 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0440-2459_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0329358 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 47 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000474Jy sigma=23.983204 ! Fit after self-cal, rms=0.986352Jy sigma=23.660958 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8636 mas, bmaj=5.245 mas, bpa=-19.02 degrees ! Estimated noise=0.4185 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.012108 Jy ! Component: 100 - total flux cleaned = 0.0137053 Jy ! Total flux subtracted in 100 components = 0.0137053 Jy ! Clean residual min=-0.001221 max=0.001165 Jy/beam ! Clean residual mean=0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0137053 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0137053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029418Jy sigma=0.661792 ! Fit after self-cal, rms=0.029409Jy sigma=0.661570 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.246 mas, bmaj=5.824 mas, bpa=-18.05 degrees ! Estimated noise=0.180245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.48834e-05 Jy ! Component: 100 - total flux cleaned = 4.45328e-05 Jy ! Component: 150 - total flux cleaned = 2.97892e-05 Jy ! Component: 200 - total flux cleaned = 3.09096e-05 Jy ! Total flux subtracted in 200 components = 3.09096e-05 Jy ! Clean residual min=-0.000883 max=0.000939 Jy/beam ! Clean residual mean=0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0137362 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.0137362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029393Jy sigma=0.661102 ! Fit after self-cal, rms=0.029393Jy sigma=0.661091 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.926946 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.18 KP 1.16 LA 0.91 ! MK 0.97 NL 0.98 OV 1.12 PT 1.40 ! ! Amplitude normalization factor in sub-array 2: 1.00088 ! Telescope amplitude corrections in sub-array 2: ! FD 0.71 KP 1.05 NL 1.09 OV 0.90 ! PT 1.25 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.935616 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.25 KP 0.87 LA 1.30 ! MK 0.96 NL 0.88 OV 1.11 PT 1.25 ! ! Amplitude normalization factor in sub-array 2: 1.05686 ! Telescope amplitude corrections in sub-array 2: ! FD 0.90 KP 0.91 NL 0.85 OV 0.98 ! PT 1.10 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.910505 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 KP 0.93 LA 1.16 ! MK 0.98 NL 1.08 OV 1.07 PT 1.44 ! ! Amplitude normalization factor in sub-array 2: 1.02466 ! Telescope amplitude corrections in sub-array 2: ! FD 0.89 KP 0.81 NL 1.09 OV 0.94 ! PT 1.14 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.932346 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.08 KP 1.02 LA 1.02 ! MK 0.96 NL 1.00 OV 1.00 PT 1.39 ! ! Amplitude normalization factor in sub-array 2: 0.98758 ! Telescope amplitude corrections in sub-array 2: ! FD 0.90 KP 1.00 NL 1.15 OV 0.91 ! PT 1.10 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.977284 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 KP 0.85 LA 1.03 ! MK 0.99 NL 1.02 OV 1.10 PT 1.09 ! ! Amplitude normalization factor in sub-array 2: 1.11072 ! Telescope amplitude corrections in sub-array 2: ! FD 0.89 KP 0.74 NL 0.94 OV 0.92 ! PT 1.01 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.994254 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.03 KP 0.83 LA 1.05 ! MK 0.93 NL 0.94 OV 1.03 PT 1.05 ! ! Amplitude normalization factor in sub-array 2: 1.07035 ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 KP 1.01 NL 0.89 OV 0.84 ! PT 0.99 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.0013 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 KP 0.73 LA 1.03 ! MK 1.09 NL 1.11 OV 0.90 PT 1.15 ! ! Amplitude normalization factor in sub-array 2: 1.10576 ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 KP 0.78 NL 1.01 OV 0.71 ! PT 1.07 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.979108 ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.91 KP 1.06 LA 1.10 ! MK 0.98 NL 1.06 OV 0.89 PT 1.41 ! ! Amplitude normalization factor in sub-array 2: 1.05883 ! Telescope amplitude corrections in sub-array 2: ! FD 0.84 KP 0.90 NL 0.99 OV 0.88 ! PT 1.11 ! ! ! Fit before self-cal, rms=0.029393Jy sigma=0.661091 ! Fit after self-cal, rms=0.029333Jy sigma=0.658863 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029333Jy sigma=0.658863 ! Fit after self-cal, rms=0.029334Jy sigma=0.658847 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.211 mas, bmaj=5.659 mas, bpa=-18.27 degrees ! Estimated noise=0.170674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308207 Jy ! Component: 100 - total flux cleaned = -0.000213735 Jy ! Component: 150 - total flux cleaned = -0.000133311 Jy ! Component: 200 - total flux cleaned = -5.60446e-05 Jy ! Total flux subtracted in 200 components = -5.60446e-05 Jy ! Clean residual min=-0.000571 max=0.000668 Jy/beam ! Clean residual mean=0.000003 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0136802 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.0136802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029327Jy sigma=0.658574 ! Fit after self-cal, rms=0.029327Jy sigma=0.658565 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029327Jy sigma=0.658565 ! Fit after self-cal, rms=0.029283Jy sigma=0.657136 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151788 Jy ! Component: 100 - total flux cleaned = 0.000212514 Jy ! Component: 150 - total flux cleaned = 0.000253759 Jy ! Component: 200 - total flux cleaned = 0.000280735 Jy ! Total flux subtracted in 200 components = 0.000280735 Jy ! Clean residual min=-0.000499 max=0.000641 Jy/beam ! Clean residual mean=0.000003 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0139609 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0139609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029281Jy sigma=0.657083 ! Fit after self-cal, rms=0.029280Jy sigma=0.656976 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.211 x 5.659 at -18.27 degrees (North through East) ! Clean map min=-0.00084136 max=0.014434 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8526 mas, bmaj=5.162 mas, bpa=-19.08 degrees ! Estimated noise=0.395181 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114969 Jy ! Component: 100 - total flux cleaned = 0.0132003 Jy ! Component: 150 - total flux cleaned = 0.0133507 Jy ! Component: 200 - total flux cleaned = 0.0134377 Jy ! Total flux subtracted in 200 components = 0.0134377 Jy ! Clean residual min=-0.000866 max=0.000845 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0134377 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0134377 Jy ! Inverting map and beam ! Estimated beam: bmin=1.211 mas, bmaj=5.659 mas, bpa=-18.27 degrees ! Estimated noise=0.170674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 38.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870191 Jy ! Component: 100 - total flux cleaned = 0.00123879 Jy ! Component: 150 - total flux cleaned = 0.00141395 Jy ! Component: 200 - total flux cleaned = 0.00157447 Jy ! Total flux subtracted in 200 components = 0.00157447 Jy ! Clean residual min=-0.000483 max=0.000540 Jy/beam ! Clean residual mean=0.000002 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0150121 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 84 components and 0.0150121 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104293 Jy ! Component: 100 - total flux cleaned = 0.000165691 Jy ! Component: 150 - total flux cleaned = 0.000220301 Jy ! Component: 200 - total flux cleaned = 0.000270135 Jy ! Total flux subtracted in 200 components = 0.000270135 Jy ! Clean residual min=-0.000391 max=0.000494 Jy/beam ! Clean residual mean=0.000002 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.0152823 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 112 components and 0.0152823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029269Jy sigma=0.656597 ! Fit after self-cal, rms=0.029268Jy sigma=0.656538 wmodel J0440-2459_X_map.mod ! Writing 112 model components to file: J0440-2459_X_map.mod wobs J0440-2459_X_uvs.fits ! Writing UV FITS file: J0440-2459_X_uvs.fits wwins J0440-2459_X_map.win ! wwins: Wrote 2 windows to J0440-2459_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204098 Jy ! Component: 100 - total flux cleaned = 0.000366309 Jy ! Component: 150 - total flux cleaned = 0.00045032 Jy ! Component: 200 - total flux cleaned = 0.000486644 Jy ! Component: 250 - total flux cleaned = 0.000492416 Jy ! Component: 300 - total flux cleaned = 0.000503284 Jy ! Component: 350 - total flux cleaned = 0.000518875 Jy ! Component: 400 - total flux cleaned = 0.000523761 Jy ! Component: 450 - total flux cleaned = 0.000528761 Jy ! Component: 500 - total flux cleaned = 0.000561734 Jy ! Component: 550 - total flux cleaned = 0.000598237 Jy ! Component: 600 - total flux cleaned = 0.000620475 Jy ! Component: 650 - total flux cleaned = 0.000650887 Jy ! Component: 700 - total flux cleaned = 0.000688927 Jy ! Component: 750 - total flux cleaned = 0.000726176 Jy ! Component: 800 - total flux cleaned = 0.000758361 Jy ! Component: 850 - total flux cleaned = 0.000793846 Jy ! Component: 900 - total flux cleaned = 0.000832391 Jy ! Component: 950 - total flux cleaned = 0.000870068 Jy ! Component: 1000 - total flux cleaned = 0.000910556 Jy ! Component: 1050 - total flux cleaned = 0.000932196 Jy ! Component: 1100 - total flux cleaned = 0.000957027 Jy ! Component: 1150 - total flux cleaned = 0.000964047 Jy ! Component: 1200 - total flux cleaned = 0.000987901 Jy ! Component: 1250 - total flux cleaned = 0.000994559 Jy ! Component: 1300 - total flux cleaned = 0.0010077 Jy ! Component: 1350 - total flux cleaned = 0.00102708 Jy ! Component: 1400 - total flux cleaned = 0.00103031 Jy ! Component: 1450 - total flux cleaned = 0.00104909 Jy ! Component: 1500 - total flux cleaned = 0.00105515 Jy ! Component: 1550 - total flux cleaned = 0.0010582 Jy ! Component: 1600 - total flux cleaned = 0.00107313 Jy ! Component: 1650 - total flux cleaned = 0.00108775 Jy ! Component: 1700 - total flux cleaned = 0.00109063 Jy ! Component: 1750 - total flux cleaned = 0.00109923 Jy ! Component: 1800 - total flux cleaned = 0.00111893 Jy ! Component: 1850 - total flux cleaned = 0.0011217 Jy ! Component: 1900 - total flux cleaned = 0.0011382 Jy ! Component: 1950 - total flux cleaned = 0.00115175 Jy ! Component: 2000 - total flux cleaned = 0.00114634 Jy ! Component: 2050 - total flux cleaned = 0.00114373 Jy ! Component: 2100 - total flux cleaned = 0.00115424 Jy ! Component: 2150 - total flux cleaned = 0.00116204 Jy ! Component: 2200 - total flux cleaned = 0.00116716 Jy ! Component: 2250 - total flux cleaned = 0.00117219 Jy ! Component: 2300 - total flux cleaned = 0.00117217 Jy ! Component: 2350 - total flux cleaned = 0.0011697 Jy ! Component: 2400 - total flux cleaned = 0.00116725 Jy ! Component: 2450 - total flux cleaned = 0.00116969 Jy ! Component: 2500 - total flux cleaned = 0.00115767 Jy ! Component: 2550 - total flux cleaned = 0.0011553 Jy ! Component: 2600 - total flux cleaned = 0.00115057 Jy ! Component: 2650 - total flux cleaned = 0.0011342 Jy ! Component: 2700 - total flux cleaned = 0.00112262 Jy ! Component: 2750 - total flux cleaned = 0.00111112 Jy ! Component: 2800 - total flux cleaned = 0.0010997 Jy ! Component: 2850 - total flux cleaned = 0.0010839 Jy ! Component: 2900 - total flux cleaned = 0.00107945 Jy ! Component: 2950 - total flux cleaned = 0.00106386 Jy ! Component: 3000 - total flux cleaned = 0.00106166 Jy ! Component: 3050 - total flux cleaned = 0.00105288 Jy ! Component: 3100 - total flux cleaned = 0.0010485 Jy ! Component: 3150 - total flux cleaned = 0.00103337 Jy ! Component: 3200 - total flux cleaned = 0.00102479 Jy ! Component: 3250 - total flux cleaned = 0.00101414 Jy ! Component: 3300 - total flux cleaned = 0.00100357 Jy ! Component: 3350 - total flux cleaned = 0.000995149 Jy ! Component: 3400 - total flux cleaned = 0.000990959 Jy ! Component: 3450 - total flux cleaned = 0.000974346 Jy ! Component: 3500 - total flux cleaned = 0.00097023 Jy ! Component: 3550 - total flux cleaned = 0.000968175 Jy ! Component: 3600 - total flux cleaned = 0.000959986 Jy ! Component: 3650 - total flux cleaned = 0.000949822 Jy ! Component: 3700 - total flux cleaned = 0.00094173 Jy ! Component: 3750 - total flux cleaned = 0.000945761 Jy ! Component: 3800 - total flux cleaned = 0.00093372 Jy ! Component: 3850 - total flux cleaned = 0.000927725 Jy ! Component: 3900 - total flux cleaned = 0.000925729 Jy ! Component: 3950 - total flux cleaned = 0.00091978 Jy ! Component: 4000 - total flux cleaned = 0.000915822 Jy ! Component: 4050 - total flux cleaned = 0.000909916 Jy ! Total flux subtracted in 4096 components = 0.000902066 Jy ! Clean residual min=-0.000122 max=0.000130 Jy/beam ! Clean residual mean=0.000000 rms=0.000036 Jy/beam ! Combined flux in latest and established models = 0.0161843 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 375 components and 0.0161843 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0440-2459_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.211 x 5.659 at -18.27 degrees (North through East) ! Clean map min=-0.00050734 max=0.01341 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0440-2459_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0440-2459_X_a_map.mod ! Writing 375 model components to file: /vlbi/vcs9/uvm//J0440-2459_X_a_map.mod wobs /vlbi/vcs9/uvm//J0440-2459_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0440-2459_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0440-2459_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0440-2459_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0134105 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 3.45259e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.772366 0.772366 1.54473 3.08946 6.17893 12.3579 24.7157 49.4314 98.8628 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.013 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 388.416 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0440-2459_X_a_dfm.log closed on Tue Dec 26 21:37:10 2017