! Started logfile: /vlbi/vcs9/uvm//J0430+1655_C_a_dfm.log on Tue Dec 26 21:35:51 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J0430+1655_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0430+1655_C_a_uvm.fits ! AN table 1: 54 integrations on 15 of 15 possible baselines. ! AN table 2: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.947092 visibilities/baseline/integration-bin. ! Found source: J0430+1655 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 15896 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J0430+1655_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0475038 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000504Jy sigma=30.623016 ! Fit after self-cal, rms=0.963207Jy sigma=29.499047 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.948 mas, bmaj=5.379 mas, bpa=-7.527 degrees ! Estimated noise=0.302268 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312194 Jy ! Component: 100 - total flux cleaned = 0.0388826 Jy ! Total flux subtracted in 100 components = 0.0388826 Jy ! Clean residual min=-0.004280 max=0.005287 Jy/beam ! Clean residual mean=-0.000008 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.0388826 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0388826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028898Jy sigma=0.844299 ! Fit after self-cal, rms=0.028889Jy sigma=0.843954 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=5.586 mas, bpa=-6.38 degrees ! Estimated noise=0.183209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245243 Jy ! Component: 100 - total flux cleaned = 0.00290963 Jy ! Component: 150 - total flux cleaned = 0.00313864 Jy ! Component: 200 - total flux cleaned = 0.00329679 Jy ! Total flux subtracted in 200 components = 0.00329679 Jy ! Clean residual min=-0.005044 max=0.005848 Jy/beam ! Clean residual mean=-0.000008 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.0421794 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.0421794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028664Jy sigma=0.838675 ! Fit after self-cal, rms=0.028663Jy sigma=0.838662 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.2368 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.80 KP 0.80 LA 0.83 ! NL 0.77 OV 0.79 ! ! Amplitude normalization factor in sub-array 2: 0.864477 ! Telescope amplitude corrections in sub-array 2: ! BR 1.25 FD 1.43 HN 0.98 LA 1.23 ! MK 0.83 NL 1.15 OV 1.17 PT 1.22 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.25326 ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.81 KP 0.79 LA 0.81 ! NL 0.72 OV 0.83 ! ! Amplitude normalization factor in sub-array 2: 0.837106 ! Telescope amplitude corrections in sub-array 2: ! BR 1.50 FD 1.32 HN 1.05 LA 1.15 ! MK 0.84 NL 1.22 OV 1.30 PT 1.18 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.246 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.80 KP 0.82 LA 0.84 ! NL 0.73 OV 0.77 ! ! Amplitude normalization factor in sub-array 2: 0.863548 ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 1.30 HN 0.94 LA 1.24 ! MK 0.87 NL 1.24 OV 1.16 PT 1.26 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.24212 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.80 KP 0.82 LA 0.82 ! NL 0.73 OV 0.80 ! ! Amplitude normalization factor in sub-array 2: 0.838564 ! Telescope amplitude corrections in sub-array 2: ! BR 1.36 FD 1.35 HN 0.96 LA 1.35 ! MK 0.79 NL 1.11 OV 1.24 PT 1.37 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.20262 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.86 KP 0.85 LA 0.85 ! NL 0.74 OV 0.78 ! ! Amplitude normalization factor in sub-array 2: 0.785718 ! Telescope amplitude corrections in sub-array 2: ! BR 1.58 FD 1.30 HN 1.02 LA 1.27 ! MK 0.96 NL 1.32 OV 1.39 PT 1.35 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.2084 ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.83 KP 0.85 LA 0.85 ! NL 0.75 OV 0.83 ! ! Amplitude normalization factor in sub-array 2: 0.839307 ! Telescope amplitude corrections in sub-array 2: ! BR 1.36 FD 1.38 HN 1.01 LA 1.21 ! MK 0.84 NL 1.12 OV 1.32 PT 1.29 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.17946 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.86 KP 0.91 LA 0.86 ! NL 0.75 OV 0.83 ! ! Amplitude normalization factor in sub-array 2: 0.848065 ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 1.24 HN 1.06 LA 1.18 ! MK 0.86 NL 1.20 OV 1.23 PT 1.39 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.18906 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.84 KP 0.88 LA 0.86 ! NL 0.75 OV 0.82 ! ! Amplitude normalization factor in sub-array 2: 0.839559 ! Telescope amplitude corrections in sub-array 2: ! BR 1.36 FD 1.38 HN 0.94 LA 1.26 ! MK 0.79 NL 1.30 OV 1.28 PT 1.23 ! ! ! Fit before self-cal, rms=0.028663Jy sigma=0.838662 ! Fit after self-cal, rms=0.027817Jy sigma=0.817910 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027817Jy sigma=0.817910 ! Fit after self-cal, rms=0.027818Jy sigma=0.817896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=6.03 mas, bpa=-8.657 degrees ! Estimated noise=0.179335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 29.7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646709 Jy ! Component: 100 - total flux cleaned = 0.00776656 Jy ! Component: 150 - total flux cleaned = 0.00866353 Jy ! Component: 200 - total flux cleaned = 0.00927833 Jy ! Total flux subtracted in 200 components = 0.00927833 Jy ! Clean residual min=-0.003831 max=0.004686 Jy/beam ! Clean residual mean=-0.000007 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.0514577 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 0.0514578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026624Jy sigma=0.774669 ! Fit after self-cal, rms=0.026462Jy sigma=0.769586 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026462Jy sigma=0.769586 ! Fit after self-cal, rms=0.026431Jy sigma=0.768729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775227 Jy ! Component: 100 - total flux cleaned = 0.000900077 Jy ! Component: 150 - total flux cleaned = 0.000956454 Jy ! Component: 200 - total flux cleaned = 0.00105917 Jy ! Total flux subtracted in 200 components = 0.00105917 Jy ! Clean residual min=-0.003533 max=0.003474 Jy/beam ! Clean residual mean=-0.000007 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0525169 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 90 components and 0.0525169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026180Jy sigma=0.759391 ! Fit after self-cal, rms=0.026137Jy sigma=0.758229 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.076 x 6.03 at -8.657 degrees (North through East) ! Clean map min=-0.0036512 max=0.033893 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.768 mas, bmaj=5.681 mas, bpa=-8.477 degrees ! Estimated noise=0.283045 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302674 Jy ! Component: 100 - total flux cleaned = 0.0406451 Jy ! Component: 150 - total flux cleaned = 0.0462937 Jy ! Component: 200 - total flux cleaned = 0.0488533 Jy ! Total flux subtracted in 200 components = 0.0488533 Jy ! Clean residual min=-0.003459 max=0.003511 Jy/beam ! Clean residual mean=-0.000006 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0488533 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.0488533 Jy ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=6.03 mas, bpa=-8.657 degrees ! Estimated noise=0.179335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38.7, -3.3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406607 Jy ! Component: 100 - total flux cleaned = 0.00541913 Jy ! Component: 150 - total flux cleaned = 0.00633056 Jy ! Component: 200 - total flux cleaned = 0.007028 Jy ! Total flux subtracted in 200 components = 0.007028 Jy ! Clean residual min=-0.003150 max=0.002868 Jy/beam ! Clean residual mean=-0.000007 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.0558813 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 93 components and 0.0558813 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479955 Jy ! Component: 100 - total flux cleaned = 0.00073117 Jy ! Component: 150 - total flux cleaned = 0.0009636 Jy ! Component: 200 - total flux cleaned = 0.00123374 Jy ! Total flux subtracted in 200 components = 0.00123374 Jy ! Clean residual min=-0.003101 max=0.002692 Jy/beam ! Clean residual mean=-0.000007 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0571151 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 133 components and 0.0571151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025716Jy sigma=0.744990 ! Fit after self-cal, rms=0.025667Jy sigma=0.743347 wmodel J0430+1655_C_map.mod ! Writing 133 model components to file: J0430+1655_C_map.mod wobs J0430+1655_C_uvs.fits ! Writing UV FITS file: J0430+1655_C_uvs.fits wwins J0430+1655_C_map.win ! wwins: Wrote 3 windows to J0430+1655_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032452 Jy ! Component: 100 - total flux cleaned = -1.10018e-05 Jy ! Component: 150 - total flux cleaned = 0.000198364 Jy ! Component: 200 - total flux cleaned = 0.000353982 Jy ! Component: 250 - total flux cleaned = 0.000390529 Jy ! Component: 300 - total flux cleaned = 0.000425197 Jy ! Component: 350 - total flux cleaned = 0.000390831 Jy ! Component: 400 - total flux cleaned = 0.000358247 Jy ! Component: 450 - total flux cleaned = 0.000326724 Jy ! Component: 500 - total flux cleaned = 0.000297324 Jy ! Component: 550 - total flux cleaned = 0.000326216 Jy ! Component: 600 - total flux cleaned = 0.000270688 Jy ! Component: 650 - total flux cleaned = 0.000297845 Jy ! Component: 700 - total flux cleaned = 0.000246105 Jy ! Component: 750 - total flux cleaned = 0.000271518 Jy ! Component: 800 - total flux cleaned = 0.000271857 Jy ! Component: 850 - total flux cleaned = 0.000248537 Jy ! Component: 900 - total flux cleaned = 0.000249195 Jy ! Component: 950 - total flux cleaned = 0.000249948 Jy ! Component: 1000 - total flux cleaned = 0.000271724 Jy ! Component: 1050 - total flux cleaned = 0.000292987 Jy ! Component: 1100 - total flux cleaned = 0.000333125 Jy ! Component: 1150 - total flux cleaned = 0.000312671 Jy ! Component: 1200 - total flux cleaned = 0.000312853 Jy ! Component: 1250 - total flux cleaned = 0.000350131 Jy ! Component: 1300 - total flux cleaned = 0.000350255 Jy ! Component: 1350 - total flux cleaned = 0.000349801 Jy ! Component: 1400 - total flux cleaned = 0.000384398 Jy ! Component: 1450 - total flux cleaned = 0.000367171 Jy ! Component: 1500 - total flux cleaned = 0.000383956 Jy ! Component: 1550 - total flux cleaned = 0.000383897 Jy ! Component: 1600 - total flux cleaned = 0.00038369 Jy ! Component: 1650 - total flux cleaned = 0.000367625 Jy ! Component: 1700 - total flux cleaned = 0.000382313 Jy ! Component: 1750 - total flux cleaned = 0.000337556 Jy ! Component: 1800 - total flux cleaned = 0.000351535 Jy ! Component: 1850 - total flux cleaned = 0.000379884 Jy ! Component: 1900 - total flux cleaned = 0.000462645 Jy ! Component: 1950 - total flux cleaned = 0.000489455 Jy ! Component: 2000 - total flux cleaned = 0.000476215 Jy ! Component: 2050 - total flux cleaned = 0.000515285 Jy ! Component: 2100 - total flux cleaned = 0.000528056 Jy ! Component: 2150 - total flux cleaned = 0.000528286 Jy ! Component: 2200 - total flux cleaned = 0.000528469 Jy ! Component: 2250 - total flux cleaned = 0.000540634 Jy ! Component: 2300 - total flux cleaned = 0.000540767 Jy ! Component: 2350 - total flux cleaned = 0.000563905 Jy ! Component: 2400 - total flux cleaned = 0.000518855 Jy ! Component: 2450 - total flux cleaned = 0.000551964 Jy ! Component: 2500 - total flux cleaned = 0.000508756 Jy ! Component: 2550 - total flux cleaned = 0.000551649 Jy ! Component: 2600 - total flux cleaned = 0.00055168 Jy ! Component: 2650 - total flux cleaned = 0.000551596 Jy ! Component: 2700 - total flux cleaned = 0.000571852 Jy ! Component: 2750 - total flux cleaned = 0.000551959 Jy ! Component: 2800 - total flux cleaned = 0.000591327 Jy ! Component: 2850 - total flux cleaned = 0.00064894 Jy ! Component: 2900 - total flux cleaned = 0.000648786 Jy ! Component: 2950 - total flux cleaned = 0.000676787 Jy ! Component: 3000 - total flux cleaned = 0.000713607 Jy ! Component: 3050 - total flux cleaned = 0.000722663 Jy ! Component: 3100 - total flux cleaned = 0.000767302 Jy ! Component: 3150 - total flux cleaned = 0.000784952 Jy ! Component: 3200 - total flux cleaned = 0.00082828 Jy ! Component: 3250 - total flux cleaned = 0.000836844 Jy ! Component: 3300 - total flux cleaned = 0.000853753 Jy ! Component: 3350 - total flux cleaned = 0.000886826 Jy ! Component: 3400 - total flux cleaned = 0.000911075 Jy ! Component: 3450 - total flux cleaned = 0.000927142 Jy ! Component: 3500 - total flux cleaned = 0.000935099 Jy ! Component: 3550 - total flux cleaned = 0.000958633 Jy ! Component: 3600 - total flux cleaned = 0.00101252 Jy ! Component: 3650 - total flux cleaned = 0.00103526 Jy ! Component: 3700 - total flux cleaned = 0.00104274 Jy ! Component: 3750 - total flux cleaned = 0.00110176 Jy ! Component: 3800 - total flux cleaned = 0.00113073 Jy ! Component: 3850 - total flux cleaned = 0.00113075 Jy ! Component: 3900 - total flux cleaned = 0.00116629 Jy ! Component: 3950 - total flux cleaned = 0.00118036 Jy ! Component: 4000 - total flux cleaned = 0.00120108 Jy ! Component: 4050 - total flux cleaned = 0.00121466 Jy ! Total flux subtracted in 4096 components = 0.00122809 Jy ! Clean residual min=-0.000354 max=0.000397 Jy/beam ! Clean residual mean=-0.000001 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0583431 Jy keep ! Adding 395 model components to the UV plane model. ! The established model now contains 528 components and 0.0583432 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0430+1655_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.076 x 6.03 at -8.657 degrees (North through East) ! Clean map min=-0.0025421 max=0.032175 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0430+1655_C_a_map.fits wmodel /vlbi/vcs9/uvm//J0430+1655_C_a_map.mod ! Writing 528 model components to file: /vlbi/vcs9/uvm//J0430+1655_C_a_map.mod wobs /vlbi/vcs9/uvm//J0430+1655_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0430+1655_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J0430+1655_C_a_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J0430+1655_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0321751 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000133716 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24676 1.24676 2.49353 4.98706 9.97411 19.9482 39.8964 79.7929 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 240.622 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0430+1655_C_a_dfm.log closed on Tue Dec 26 21:35:55 2017