! Started logfile: /vlbi/vcs9/uvm//J0429+1815_X_a_dfm.log on Tue Dec 26 21:35:46 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0429+1815_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0429+1815_X_a_uvm.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863318 visibilities/baseline/integration-bin. ! Found source: J0429+1815 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 22688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0429+1815_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.111058 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006044Jy sigma=26.828629 ! Fit after self-cal, rms=0.894460Jy sigma=23.793303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8066 mas, bmaj=2.043 mas, bpa=9.071 degrees ! Estimated noise=0.345938 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0870497 Jy ! Component: 100 - total flux cleaned = 0.106571 Jy ! Total flux subtracted in 100 components = 0.106571 Jy ! Clean residual min=-0.003479 max=0.006145 Jy/beam ! Clean residual mean=-0.000003 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.106571 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.106571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030036Jy sigma=0.771829 ! Fit after self-cal, rms=0.030021Jy sigma=0.771357 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854749 Jy ! Component: 100 - total flux cleaned = 0.0123136 Jy ! Total flux subtracted in 100 components = 0.0123136 Jy ! Clean residual min=-0.002806 max=0.003123 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.118885 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 9 components and 0.118885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027941Jy sigma=0.710571 ! Fit after self-cal, rms=0.027939Jy sigma=0.710436 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.095 mas, bmaj=2.412 mas, bpa=8.28 degrees ! Estimated noise=0.176104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.8, -2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384669 Jy ! Component: 100 - total flux cleaned = 0.00602278 Jy ! Component: 150 - total flux cleaned = 0.0071519 Jy ! Component: 200 - total flux cleaned = 0.0079469 Jy ! Total flux subtracted in 200 components = 0.0079469 Jy ! Clean residual min=-0.001649 max=0.001819 Jy/beam ! Clean residual mean=-0.000005 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.126832 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 0.126832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027486Jy sigma=0.698068 ! Fit after self-cal, rms=0.027476Jy sigma=0.697859 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999867 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.97 KP 1.00 ! LA 0.98 MK 1.03 NL 1.02 OV 1.02 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00092 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.97 KP 1.00 ! LA 0.99 MK 1.03 NL 1.02 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00617 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.96 KP 0.99 ! LA 0.99 MK 1.02 NL 1.02 OV 1.01 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00258 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.96 KP 1.00 ! LA 1.00 MK 1.02 NL 1.03 OV 1.00 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.0038 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.96 KP 0.99 ! LA 1.00 MK 1.04 NL 1.01 OV 1.01 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.999986 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.96 KP 0.99 ! LA 0.99 MK 1.05 NL 1.02 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.00336 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.97 KP 0.99 ! LA 0.98 MK 1.04 NL 1.01 OV 1.00 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.998118 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.98 KP 0.99 ! LA 0.98 MK 1.04 NL 1.02 OV 1.01 ! PT 0.98 SC 1.02 ! ! ! Fit before self-cal, rms=0.027476Jy sigma=0.697859 ! Fit after self-cal, rms=0.027420Jy sigma=0.694538 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027420Jy sigma=0.694538 ! Fit after self-cal, rms=0.027421Jy sigma=0.694531 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.103 mas, bmaj=2.419 mas, bpa=8.602 degrees ! Estimated noise=0.17621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850956 Jy ! Component: 100 - total flux cleaned = 0.00117339 Jy ! Component: 150 - total flux cleaned = 0.00133826 Jy ! Component: 200 - total flux cleaned = 0.0014105 Jy ! Total flux subtracted in 200 components = 0.0014105 Jy ! Clean residual min=-0.001818 max=0.001505 Jy/beam ! Clean residual mean=-0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.128242 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 0.128242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027368Jy sigma=0.693200 ! Fit after self-cal, rms=0.027366Jy sigma=0.693172 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027366Jy sigma=0.693172 ! Fit after self-cal, rms=0.027344Jy sigma=0.692600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.58571e-05 Jy ! Component: 100 - total flux cleaned = 9.83147e-05 Jy ! Component: 150 - total flux cleaned = 7.79244e-05 Jy ! Component: 200 - total flux cleaned = 3.94027e-05 Jy ! Total flux subtracted in 200 components = 3.94027e-05 Jy ! Clean residual min=-0.001765 max=0.001476 Jy/beam ! Clean residual mean=-0.000002 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.128282 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.128282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027319Jy sigma=0.692004 ! Fit after self-cal, rms=0.027316Jy sigma=0.691947 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.103 x 2.419 at 8.602 degrees (North through East) ! Clean map min=-0.0016751 max=0.10726 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027316Jy sigma=0.691947 ! Fit after self-cal, rms=0.027028Jy sigma=0.685033 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027028Jy sigma=0.685033 ! Fit after self-cal, rms=0.027028Jy sigma=0.685026 ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=2.416 mas, bpa=8.773 degrees ! Estimated noise=0.175913 mJy/beam. ! Added new window around map position (8.8, 2.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809914 Jy ! Component: 100 - total flux cleaned = 0.000808224 Jy ! Component: 150 - total flux cleaned = 0.000806509 Jy ! Component: 200 - total flux cleaned = 0.000775649 Jy ! Total flux subtracted in 200 components = 0.000775649 Jy ! Clean residual min=-0.001450 max=0.001374 Jy/beam ! Clean residual mean=0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.129057 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.129057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026897Jy sigma=0.682403 ! Fit after self-cal, rms=0.026898Jy sigma=0.682328 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8093 mas, bmaj=2.043 mas, bpa=9.316 degrees ! Estimated noise=0.347365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873558 Jy ! Component: 100 - total flux cleaned = 0.106659 Jy ! Component: 150 - total flux cleaned = 0.115054 Jy ! Component: 200 - total flux cleaned = 0.119661 Jy ! Total flux subtracted in 200 components = 0.119661 Jy ! Clean residual min=-0.002667 max=0.002594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.119661 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.119661 Jy ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=2.416 mas, bpa=8.773 degrees ! Estimated noise=0.175913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370036 Jy ! Component: 100 - total flux cleaned = 0.00580065 Jy ! Component: 150 - total flux cleaned = 0.00682555 Jy ! Component: 200 - total flux cleaned = 0.00713981 Jy ! Total flux subtracted in 200 components = 0.00713981 Jy ! Clean residual min=-0.001414 max=0.001345 Jy/beam ! Clean residual mean=-0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.1268 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 47 components and 0.1268 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279282 Jy ! Component: 100 - total flux cleaned = 0.000361607 Jy ! Component: 150 - total flux cleaned = 0.000554163 Jy ! Component: 200 - total flux cleaned = 0.000767414 Jy ! Total flux subtracted in 200 components = 0.000767414 Jy ! Clean residual min=-0.001376 max=0.001215 Jy/beam ! Clean residual mean=-0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.127568 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.127568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026904Jy sigma=0.681960 ! Fit after self-cal, rms=0.026894Jy sigma=0.681818 wmodel J0429+1815_X_map.mod ! Writing 59 model components to file: J0429+1815_X_map.mod wobs J0429+1815_X_uvs.fits ! Writing UV FITS file: J0429+1815_X_uvs.fits wwins J0429+1815_X_map.win ! wwins: Wrote 4 windows to J0429+1815_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000509064 Jy ! Component: 100 - total flux cleaned = -0.000733828 Jy ! Component: 150 - total flux cleaned = -0.00094453 Jy ! Component: 200 - total flux cleaned = -0.00112476 Jy ! Component: 250 - total flux cleaned = -0.00127819 Jy ! Component: 300 - total flux cleaned = -0.00142576 Jy ! Component: 350 - total flux cleaned = -0.00156861 Jy ! Component: 400 - total flux cleaned = -0.00167248 Jy ! Component: 450 - total flux cleaned = -0.00179045 Jy ! Component: 500 - total flux cleaned = -0.00188857 Jy ! Component: 550 - total flux cleaned = -0.001968 Jy ! Component: 600 - total flux cleaned = -0.00202986 Jy ! Component: 650 - total flux cleaned = -0.00207509 Jy ! Component: 700 - total flux cleaned = -0.00217806 Jy ! Component: 750 - total flux cleaned = -0.00223562 Jy ! Component: 800 - total flux cleaned = -0.00230629 Jy ! Component: 850 - total flux cleaned = -0.00238964 Jy ! Component: 900 - total flux cleaned = -0.00247106 Jy ! Component: 950 - total flux cleaned = -0.00256395 Jy ! Component: 1000 - total flux cleaned = -0.00262924 Jy ! Component: 1050 - total flux cleaned = -0.00270591 Jy ! Component: 1100 - total flux cleaned = -0.00275614 Jy ! Component: 1150 - total flux cleaned = -0.00283 Jy ! Component: 1200 - total flux cleaned = -0.00290256 Jy ! Component: 1250 - total flux cleaned = -0.0029501 Jy ! Component: 1300 - total flux cleaned = -0.00302011 Jy ! Component: 1350 - total flux cleaned = -0.00311183 Jy ! Component: 1400 - total flux cleaned = -0.00312304 Jy ! Component: 1450 - total flux cleaned = -0.00316775 Jy ! Component: 1500 - total flux cleaned = -0.00322245 Jy ! Component: 1550 - total flux cleaned = -0.00328712 Jy ! Component: 1600 - total flux cleaned = -0.00332967 Jy ! Component: 1650 - total flux cleaned = -0.003382 Jy ! Component: 1700 - total flux cleaned = -0.00341302 Jy ! Component: 1750 - total flux cleaned = -0.00348422 Jy ! Component: 1800 - total flux cleaned = -0.00351444 Jy ! Component: 1850 - total flux cleaned = -0.00355442 Jy ! Component: 1900 - total flux cleaned = -0.00358414 Jy ! Component: 1950 - total flux cleaned = -0.00363274 Jy ! Component: 2000 - total flux cleaned = -0.00366146 Jy ! Component: 2050 - total flux cleaned = -0.00368986 Jy ! Component: 2100 - total flux cleaned = -0.00368988 Jy ! Component: 2150 - total flux cleaned = -0.00372694 Jy ! Component: 2200 - total flux cleaned = -0.00374529 Jy ! Component: 2250 - total flux cleaned = -0.00377237 Jy ! Component: 2300 - total flux cleaned = -0.00379031 Jy ! Component: 2350 - total flux cleaned = -0.00378141 Jy ! Component: 2400 - total flux cleaned = -0.00379916 Jy ! Component: 2450 - total flux cleaned = -0.00381658 Jy ! Component: 2500 - total flux cleaned = -0.00380796 Jy ! Component: 2550 - total flux cleaned = -0.00381656 Jy ! Component: 2600 - total flux cleaned = -0.00382511 Jy ! Component: 2650 - total flux cleaned = -0.00384186 Jy ! Component: 2700 - total flux cleaned = -0.00385019 Jy ! Component: 2750 - total flux cleaned = -0.00383373 Jy ! Component: 2800 - total flux cleaned = -0.00385828 Jy ! Component: 2850 - total flux cleaned = -0.00385013 Jy ! Component: 2900 - total flux cleaned = -0.00386609 Jy ! Component: 2950 - total flux cleaned = -0.00385813 Jy ! Component: 3000 - total flux cleaned = -0.00385816 Jy ! Component: 3050 - total flux cleaned = -0.00389735 Jy ! Component: 3100 - total flux cleaned = -0.00390504 Jy ! Component: 3150 - total flux cleaned = -0.00387411 Jy ! Component: 3200 - total flux cleaned = -0.00389707 Jy ! Component: 3250 - total flux cleaned = -0.00390454 Jy ! Component: 3300 - total flux cleaned = -0.00389702 Jy ! Component: 3350 - total flux cleaned = -0.00392688 Jy ! Component: 3400 - total flux cleaned = -0.00392682 Jy ! Component: 3450 - total flux cleaned = -0.00393414 Jy ! Component: 3500 - total flux cleaned = -0.00394143 Jy ! Component: 3550 - total flux cleaned = -0.00394143 Jy ! Component: 3600 - total flux cleaned = -0.00395581 Jy ! Component: 3650 - total flux cleaned = -0.00397009 Jy ! Component: 3700 - total flux cleaned = -0.00397719 Jy ! Component: 3750 - total flux cleaned = -0.0039913 Jy ! Component: 3800 - total flux cleaned = -0.00399128 Jy ! Component: 3850 - total flux cleaned = -0.00402587 Jy ! Component: 3900 - total flux cleaned = -0.00401201 Jy ! Component: 3950 - total flux cleaned = -0.00401884 Jy ! Component: 4000 - total flux cleaned = -0.00402566 Jy ! Component: 4050 - total flux cleaned = -0.00400546 Jy ! Total flux subtracted in 4096 components = -0.00404565 Jy ! Clean residual min=-0.000379 max=0.000404 Jy/beam ! Clean residual mean=-0.000000 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.123522 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 366 components and 0.123522 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0429+1815_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 2.416 at 8.773 degrees (North through East) ! Clean map min=-0.00078273 max=0.10673 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0429+1815_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0429+1815_X_a_map.mod ! Writing 366 model components to file: /vlbi/vcs9/uvm//J0429+1815_X_a_map.mod wobs /vlbi/vcs9/uvm//J0429+1815_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0429+1815_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0429+1815_X_a_map.win ! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J0429+1815_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.106728 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116055 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326217 0.326217 0.652433 1.30487 2.60973 5.21946 10.4389 20.8779 41.7557 83.5114 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.106 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 919.634 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0429+1815_X_a_dfm.log closed on Tue Dec 26 21:35:50 2017