! Started logfile: /vlbi/vcs9/uvm//J0423+4150_C_a_dfm.log on Tue Dec 26 21:34:09 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0423+4150_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0423+4150_C_a_uvm.fits
! AN table 1: 26 integrations on 36 of 36 possible baselines.
! AN table 2: 25 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.771394 visibilities/baseline/integration-bin.
! Found source: J0423+4150
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 10096 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0423+4150_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.861069 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 28 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.329902Jy  sigma=37.686904
! Fit after  self-cal, rms=0.252601Jy  sigma=6.763731
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.612 mas, bmaj=5.456 mas, bpa=69.39 degrees
! Estimated noise=0.498988 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.704259 Jy
! Component: 100  -  total flux cleaned = 0.846448 Jy
! Total flux subtracted in 100 components = 0.846448 Jy
! Clean residual min=-0.037921 max=0.045925 Jy/beam
! Clean residual mean=-0.000478 rms=0.009602 Jy/beam
! Combined flux in latest and established models = 0.846449 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.846449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.162405Jy  sigma=4.338902
! Fit after  self-cal, rms=0.161709Jy  sigma=4.310590
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=5.948 mas, bpa=67.86 degrees
! Estimated noise=0.250531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.101659 Jy
! Component: 100  -  total flux cleaned = 0.150138 Jy
! Component: 150  -  total flux cleaned = 0.177563 Jy
! Component: 200  -  total flux cleaned = 0.193986 Jy
! Total flux subtracted in 200 components = 0.193986 Jy
! Clean residual min=-0.026329 max=0.023845 Jy/beam
! Clean residual mean=-0.000834 rms=0.005923 Jy/beam
! Combined flux in latest and established models = 1.04043 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 1.04043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.110805Jy  sigma=2.727886
! Fit after  self-cal, rms=0.109762Jy  sigma=2.699646
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.06068
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.93     HN        0.94     KP        0.97     
!   LA        0.97     NL        0.95     OV        0.99     PT        0.94     
!   SC        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.958641
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     HN        1.05     KP        1.10     LA        1.04     
!   NL        1.03     OV        1.05     PT        0.88     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0459
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.95     HN        0.95     KP        0.97     
!   LA        0.97     NL        0.97     OV        1.02     PT        0.94     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.948576
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     HN        1.02     KP        1.10     LA        1.05     
!   NL        1.05     OV        1.08     PT        0.90     SC        1.09     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02599
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.95     KP        0.98     
!   LA        0.97     NL        0.98     OV        1.07     PT        0.95     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.941572
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     HN        1.05     KP        1.11     LA        1.04     
!   NL        1.08     OV        1.06     PT        0.93     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02947
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        0.95     KP        0.99     
!   LA        0.97     NL        0.97     OV        1.08     PT        0.95     
!   SC        0.96     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.940735
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     HN        1.07     KP        1.10     LA        1.06     
!   NL        1.05     OV        1.03     PT        0.96     SC        1.10     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.05693
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.64     FD        0.97     HN        0.95     KP        0.99     
!   LA        0.98     NL        0.97     OV        1.09     PT        0.96     
!   SC        0.96     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.951394
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     HN        1.05     KP        1.12     LA        1.06     
!   NL        1.03     OV        1.04     PT        0.93     SC        1.07     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02248
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.97     HN        0.96     KP        0.99     
!   LA        0.97     NL        0.97     OV        1.09     PT        0.96     
!   SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.945108
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     HN        1.05     KP        1.11     LA        1.04     
!   NL        1.04     OV        1.06     PT        0.92     SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02084
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        0.95     KP        1.00     
!   LA        0.98     NL        0.96     OV        1.09     PT        0.96     
!   SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.944578
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     HN        1.04     KP        1.13     LA        1.06     
!   NL        1.06     OV        1.07     PT        0.93     SC        1.09     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02112
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.98     HN        0.96     KP        1.00     
!   LA        0.98     NL        0.96     OV        1.09     PT        0.96     
!   SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.946031
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     HN        1.04     KP        1.12     LA        1.05     
!   NL        1.04     OV        1.08     PT        0.91     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.109762Jy  sigma=2.699646
! Fit after  self-cal, rms=0.088712Jy  sigma=2.406487
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088712Jy  sigma=2.406487
! Fit after  self-cal, rms=0.088713Jy  sigma=2.406432
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.209 mas, bmaj=5.875 mas, bpa=67.94 degrees
! Estimated noise=0.248938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117148 Jy
! Component: 100  -  total flux cleaned = 0.0149853 Jy
! Component: 150  -  total flux cleaned = 0.016195 Jy
! Component: 200  -  total flux cleaned = 0.0169151 Jy
! Total flux subtracted in 200 components = 0.0169151 Jy
! Clean residual min=-0.017134 max=0.016538 Jy/beam
! Clean residual mean=0.000206 rms=0.003891 Jy/beam
! Combined flux in latest and established models = 1.05735 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 65 components and 1.05735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087195Jy  sigma=2.370779
! Fit after  self-cal, rms=0.087105Jy  sigma=2.369549
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087105Jy  sigma=2.369549
! Fit after  self-cal, rms=0.086635Jy  sigma=2.355369
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122751 Jy
! Component: 100  -  total flux cleaned = 0.00167221 Jy
! Component: 150  -  total flux cleaned = 0.00188239 Jy
! Component: 200  -  total flux cleaned = 0.0019783 Jy
! Total flux subtracted in 200 components = 0.0019783 Jy
! Clean residual min=-0.017221 max=0.016293 Jy/beam
! Clean residual mean=0.000231 rms=0.003879 Jy/beam
! Combined flux in latest and established models = 1.05933 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 1.05933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086345Jy  sigma=2.349439
! Fit after  self-cal, rms=0.086202Jy  sigma=2.345786
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.209 x 5.875 at 67.94 degrees (North through East)
! Clean map  min=-0.016974  max=0.83701 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086202Jy  sigma=2.345786
! Fit after  self-cal, rms=0.041144Jy  sigma=1.021397
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041144Jy  sigma=1.021397
! Fit after  self-cal, rms=0.041050Jy  sigma=1.018521
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=5.819 mas, bpa=67.98 degrees
! Estimated noise=0.247501 mJy/beam.
! Added new window around map position (-10.8, -6.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145463 Jy
! Component: 100  -  total flux cleaned = 0.0204907 Jy
! Component: 150  -  total flux cleaned = 0.0220841 Jy
! Component: 200  -  total flux cleaned = 0.0230635 Jy
! Total flux subtracted in 200 components = 0.0230635 Jy
! Clean residual min=-0.004797 max=0.006543 Jy/beam
! Clean residual mean=-0.000020 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 1.08239 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 100 components and 1.08239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036610Jy  sigma=0.877207
! Fit after  self-cal, rms=0.036201Jy  sigma=0.869172
! Inverting map 
! Added new window around map position (-15.3, 22.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00687633 Jy
! Component: 100  -  total flux cleaned = 0.00809562 Jy
! Component: 150  -  total flux cleaned = 0.00835168 Jy
! Component: 200  -  total flux cleaned = 0.00858487 Jy
! Total flux subtracted in 200 components = 0.00858487 Jy
! Clean residual min=-0.004309 max=0.004183 Jy/beam
! Clean residual mean=0.000036 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 1.09098 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 131 components and 1.09098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034989Jy  sigma=0.828788
! Fit after  self-cal, rms=0.034839Jy  sigma=0.824572
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.624 mas, bmaj=5.409 mas, bpa=69.54 degrees
! Estimated noise=0.494218 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.700173 Jy
! Component: 100  -  total flux cleaned = 0.848196 Jy
! Component: 150  -  total flux cleaned = 0.919619 Jy
! Component: 200  -  total flux cleaned = 0.961329 Jy
! Total flux subtracted in 200 components = 0.961329 Jy
! Clean residual min=-0.009490 max=0.018615 Jy/beam
! Clean residual mean=-0.000208 rms=0.002818 Jy/beam
! Combined flux in latest and established models = 0.961329 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.961329 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=5.819 mas, bpa=67.98 degrees
! Estimated noise=0.247501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.7, -0.3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0443816 Jy
! Component: 100  -  total flux cleaned = 0.0687267 Jy
! Component: 150  -  total flux cleaned = 0.0839849 Jy
! Component: 200  -  total flux cleaned = 0.0947585 Jy
! Total flux subtracted in 200 components = 0.0947585 Jy
! Clean residual min=-0.004883 max=0.005911 Jy/beam
! Clean residual mean=-0.000324 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 1.05609 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 91 components and 1.05609 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793704 Jy
! Component: 100  -  total flux cleaned = 0.0137765 Jy
! Component: 150  -  total flux cleaned = 0.0174291 Jy
! Component: 200  -  total flux cleaned = 0.0203806 Jy
! Total flux subtracted in 200 components = 0.0203806 Jy
! Clean residual min=-0.003541 max=0.003156 Jy/beam
! Clean residual mean=-0.000119 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 1.07647 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 68 model components to the UV plane model.
! The established model now contains 143 components and 1.07647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034267Jy  sigma=0.809420
! Fit after  self-cal, rms=0.033907Jy  sigma=0.799637
wmodel J0423+4150_C_map.mod
! Writing 143 model components to file: J0423+4150_C_map.mod
wobs   J0423+4150_C_uvs.fits
! Writing UV FITS file: J0423+4150_C_uvs.fits
wwins  J0423+4150_C_map.win
! wwins: Wrote 4 windows to J0423+4150_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000876051 Jy
! Component: 100  -  total flux cleaned = 0.000717735 Jy
! Component: 150  -  total flux cleaned = 0.000567774 Jy
! Component: 200  -  total flux cleaned = 0.000521467 Jy
! Component: 250  -  total flux cleaned = 0.000564477 Jy
! Component: 300  -  total flux cleaned = 0.000731102 Jy
! Component: 350  -  total flux cleaned = 0.000889802 Jy
! Component: 400  -  total flux cleaned = 0.000891278 Jy
! Component: 450  -  total flux cleaned = 0.00110922 Jy
! Component: 500  -  total flux cleaned = 0.00131651 Jy
! Component: 550  -  total flux cleaned = 0.00138344 Jy
! Component: 600  -  total flux cleaned = 0.00154317 Jy
! Component: 650  -  total flux cleaned = 0.0015443 Jy
! Component: 700  -  total flux cleaned = 0.00145548 Jy
! Component: 750  -  total flux cleaned = 0.00151403 Jy
! Component: 800  -  total flux cleaned = 0.00154238 Jy
! Component: 850  -  total flux cleaned = 0.0015153 Jy
! Component: 900  -  total flux cleaned = 0.0015965 Jy
! Component: 950  -  total flux cleaned = 0.00164864 Jy
! Component: 1000  -  total flux cleaned = 0.00151981 Jy
! Component: 1050  -  total flux cleaned = 0.00154495 Jy
! Component: 1100  -  total flux cleaned = 0.00156881 Jy
! Component: 1150  -  total flux cleaned = 0.00152041 Jy
! Component: 1200  -  total flux cleaned = 0.00142564 Jy
! Component: 1250  -  total flux cleaned = 0.00133358 Jy
! Component: 1300  -  total flux cleaned = 0.00122022 Jy
! Component: 1350  -  total flux cleaned = 0.00115376 Jy
! Component: 1400  -  total flux cleaned = 0.0010665 Jy
! Component: 1450  -  total flux cleaned = 0.000980121 Jy
! Component: 1500  -  total flux cleaned = 0.000812264 Jy
! Component: 1550  -  total flux cleaned = 0.000729738 Jy
! Component: 1600  -  total flux cleaned = 0.000628452 Jy
! Component: 1650  -  total flux cleaned = 0.000509422 Jy
! Component: 1700  -  total flux cleaned = 0.000490016 Jy
! Component: 1750  -  total flux cleaned = 0.000374642 Jy
! Component: 1800  -  total flux cleaned = 0.00035607 Jy
! Component: 1850  -  total flux cleaned = 0.000299638 Jy
! Component: 1900  -  total flux cleaned = 0.000225887 Jy
! Component: 1950  -  total flux cleaned = 0.000171608 Jy
! Component: 2000  -  total flux cleaned = 0.000171746 Jy
! Component: 2050  -  total flux cleaned = 8.41042e-05 Jy
! Component: 2100  -  total flux cleaned = 4.91602e-05 Jy
! Component: 2150  -  total flux cleaned = -8.72719e-05 Jy
! Component: 2200  -  total flux cleaned = -0.000104333 Jy
! Component: 2250  -  total flux cleaned = -0.000204262 Jy
! Component: 2300  -  total flux cleaned = -0.000253785 Jy
! Component: 2350  -  total flux cleaned = -0.000351334 Jy
! Component: 2400  -  total flux cleaned = -0.000463533 Jy
! Component: 2450  -  total flux cleaned = -0.000526889 Jy
! Component: 2500  -  total flux cleaned = -0.000604978 Jy
! Component: 2550  -  total flux cleaned = -0.000728223 Jy
! Component: 2600  -  total flux cleaned = -0.000788988 Jy
! Component: 2650  -  total flux cleaned = -0.000864208 Jy
! Component: 2700  -  total flux cleaned = -0.000923723 Jy
! Component: 2750  -  total flux cleaned = -0.00101206 Jy
! Component: 2800  -  total flux cleaned = -0.00108488 Jy
! Component: 2850  -  total flux cleaned = -0.0011424 Jy
! Component: 2900  -  total flux cleaned = -0.00117108 Jy
! Component: 2950  -  total flux cleaned = -0.00128389 Jy
! Component: 3000  -  total flux cleaned = -0.0013674 Jy
! Component: 3050  -  total flux cleaned = -0.00138115 Jy
! Component: 3100  -  total flux cleaned = -0.0014494 Jy
! Component: 3150  -  total flux cleaned = -0.00148985 Jy
! Component: 3200  -  total flux cleaned = -0.00155682 Jy
! Component: 3250  -  total flux cleaned = -0.00163611 Jy
! Component: 3300  -  total flux cleaned = -0.0016883 Jy
! Component: 3350  -  total flux cleaned = -0.00174013 Jy
! Component: 3400  -  total flux cleaned = -0.00180411 Jy
! Component: 3450  -  total flux cleaned = -0.00186765 Jy
! Component: 3500  -  total flux cleaned = -0.00195578 Jy
! Component: 3550  -  total flux cleaned = -0.00200567 Jy
! Component: 3600  -  total flux cleaned = -0.00207967 Jy
! Component: 3650  -  total flux cleaned = -0.0021409 Jy
! Component: 3700  -  total flux cleaned = -0.00222553 Jy
! Component: 3750  -  total flux cleaned = -0.00226148 Jy
! Component: 3800  -  total flux cleaned = -0.00233283 Jy
! Component: 3850  -  total flux cleaned = -0.0024034 Jy
! Component: 3900  -  total flux cleaned = -0.00243832 Jy
! Component: 3950  -  total flux cleaned = -0.00248463 Jy
! Component: 4000  -  total flux cleaned = -0.00254215 Jy
! Component: 4050  -  total flux cleaned = -0.00257629 Jy
! Total flux subtracted in 4096 components = -0.00267788 Jy
! Clean residual min=-0.000615 max=0.000592 Jy/beam
! Clean residual mean=-0.000017 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 1.07379 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 467 components and 1.07379 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0423+4150_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.218 x 5.819 at 67.98 degrees (North through East)
! Clean map  min=-0.0016887  max=0.83736 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0423+4150_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0423+4150_C_a_map.mod
! Writing 467 model components to file: /vlbi/vcs9/uvm//J0423+4150_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0423+4150_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0423+4150_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0423+4150_C_a_map.win
! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J0423+4150_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.837357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0759755 0.0759755 0.151951 0.303902 0.607804 1.21561 2.43122 4.86243 9.72486 19.4497 38.8995 77.7989
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.837 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3948.64 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0423+4150_C_a_dfm.log closed on Tue Dec 26 21:34:13 2017