! Started logfile: /vlbi/vcs9/uvm//J0418-0300_X_b_dfm.log on Tue Dec 26 21:33:24 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0418-0300_X_b_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0418-0300_X_b_uvm.fits ! AN table 1: 37 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.984234 visibilities/baseline/integration-bin. ! Found source: J0418-0300 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 10488 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0418-0300_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0433641 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000527Jy sigma=22.887110 ! Fit after self-cal, rms=0.981248Jy sigma=22.452432 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8724 mas, bmaj=3.947 mas, bpa=-20.18 degrees ! Estimated noise=0.503811 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161096 Jy ! Component: 100 - total flux cleaned = 0.0195987 Jy ! Total flux subtracted in 100 components = 0.0195987 Jy ! Clean residual min=-0.001463 max=0.001260 Jy/beam ! Clean residual mean=0.000000 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0195987 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0195987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038665Jy sigma=0.720337 ! Fit after self-cal, rms=0.038637Jy sigma=0.719573 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.178 mas, bmaj=4.155 mas, bpa=-19.29 degrees ! Estimated noise=0.301719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234332 Jy ! Component: 100 - total flux cleaned = 0.00345699 Jy ! Component: 150 - total flux cleaned = 0.00406705 Jy ! Component: 200 - total flux cleaned = 0.00429163 Jy ! Total flux subtracted in 200 components = 0.00429163 Jy ! Clean residual min=-0.001045 max=0.000898 Jy/beam ! Clean residual mean=0.000002 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.0238904 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.0238904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038547Jy sigma=0.716840 ! Fit after self-cal, rms=0.038546Jy sigma=0.716810 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.978592 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.19 KP 1.13 ! LA 1.02 MK 1.04 NL 0.92 OV 0.97 ! PT 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988455 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.10 HN 1.27 KP 0.81 ! LA 1.00 MK 0.98 NL 1.04 OV 0.94 ! PT 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02145 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.04 KP 0.92 ! LA 1.07 MK 0.97 NL 0.93 OV 0.94 ! PT 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.950739 ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.14 HN 1.01 KP 0.85 ! LA 0.95 MK 0.98 NL 1.02 OV 0.97 ! PT 1.16 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.01337 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 0.98 KP 0.90 ! LA 0.98 MK 1.05 NL 0.91 OV 0.96 ! PT 1.07 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.953674 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.11 KP 0.92 ! LA 1.05 MK 1.13 NL 0.93 OV 1.10 ! PT 1.20 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.96454 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 0.93 KP 1.04 ! LA 1.08 MK 0.99 NL 1.36 OV 0.85 ! PT 1.03 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.0248 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 0.88 KP 0.98 ! LA 1.15 MK 0.99 NL 1.06 OV 0.94 ! PT 0.90 ! ! ! Fit before self-cal, rms=0.038546Jy sigma=0.716810 ! Fit after self-cal, rms=0.039151Jy sigma=0.715089 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039151Jy sigma=0.715089 ! Fit after self-cal, rms=0.039154Jy sigma=0.715075 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=4.211 mas, bpa=-19.35 degrees ! Estimated noise=0.290894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511382 Jy ! Component: 100 - total flux cleaned = -0.000612624 Jy ! Component: 150 - total flux cleaned = -0.000663845 Jy ! Component: 200 - total flux cleaned = -0.000684791 Jy ! Total flux subtracted in 200 components = -0.000684791 Jy ! Clean residual min=-0.000843 max=0.000892 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0232056 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.0232056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039154Jy sigma=0.714891 ! Fit after self-cal, rms=0.039154Jy sigma=0.714888 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039154Jy sigma=0.714888 ! Fit after self-cal, rms=0.039139Jy sigma=0.714026 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.24277e-05 Jy ! Component: 100 - total flux cleaned = 2.8353e-05 Jy ! Component: 150 - total flux cleaned = 2.34398e-05 Jy ! Component: 200 - total flux cleaned = 2.3317e-05 Jy ! Total flux subtracted in 200 components = 2.3317e-05 Jy ! Clean residual min=-0.000861 max=0.000889 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0232289 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0232289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039138Jy sigma=0.713992 ! Fit after self-cal, rms=0.039147Jy sigma=0.713876 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.199 x 4.211 at -19.35 degrees (North through East) ! Clean map min=-0.00081722 max=0.018918 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8779 mas, bmaj=3.961 mas, bpa=-20.21 degrees ! Estimated noise=0.492966 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158261 Jy ! Component: 100 - total flux cleaned = 0.0192321 Jy ! Component: 150 - total flux cleaned = 0.0209802 Jy ! Component: 200 - total flux cleaned = 0.022047 Jy ! Total flux subtracted in 200 components = 0.022047 Jy ! Clean residual min=-0.001274 max=0.001224 Jy/beam ! Clean residual mean=0.000000 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.022047 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.022047 Jy ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=4.211 mas, bpa=-19.35 degrees ! Estimated noise=0.290894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864038 Jy ! Component: 100 - total flux cleaned = 0.0011442 Jy ! Component: 150 - total flux cleaned = 0.00122925 Jy ! Component: 200 - total flux cleaned = 0.00123782 Jy ! Total flux subtracted in 200 components = 0.00123782 Jy ! Clean residual min=-0.000834 max=0.000900 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0232848 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0232848 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.89499e-06 Jy ! Component: 100 - total flux cleaned = 8.11446e-06 Jy ! Component: 150 - total flux cleaned = -3.79908e-06 Jy ! Component: 200 - total flux cleaned = -9.35901e-06 Jy ! Total flux subtracted in 200 components = -9.35901e-06 Jy ! Clean residual min=-0.000851 max=0.000901 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0232755 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0232755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039147Jy sigma=0.713876 ! Fit after self-cal, rms=0.039163Jy sigma=0.713984 wmodel J0418-0300_X_map.mod ! Writing 54 model components to file: J0418-0300_X_map.mod wobs J0418-0300_X_uvs.fits ! Writing UV FITS file: J0418-0300_X_uvs.fits wwins J0418-0300_X_map.win ! wwins: Wrote 1 windows to J0418-0300_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282281 Jy ! Component: 100 - total flux cleaned = 0.000340623 Jy ! Component: 150 - total flux cleaned = 0.000435644 Jy ! Component: 200 - total flux cleaned = 0.000526334 Jy ! Component: 250 - total flux cleaned = 0.00063707 Jy ! Component: 300 - total flux cleaned = 0.000695578 Jy ! Component: 350 - total flux cleaned = 0.000706927 Jy ! Component: 400 - total flux cleaned = 0.00070709 Jy ! Component: 450 - total flux cleaned = 0.000707047 Jy ! Component: 500 - total flux cleaned = 0.000727258 Jy ! Component: 550 - total flux cleaned = 0.000746747 Jy ! Component: 600 - total flux cleaned = 0.000756483 Jy ! Component: 650 - total flux cleaned = 0.000765932 Jy ! Component: 700 - total flux cleaned = 0.000793574 Jy ! Component: 750 - total flux cleaned = 0.000784385 Jy ! Component: 800 - total flux cleaned = 0.000784387 Jy ! Component: 850 - total flux cleaned = 0.000793253 Jy ! Component: 900 - total flux cleaned = 0.000810317 Jy ! Component: 950 - total flux cleaned = 0.000835283 Jy ! Component: 1000 - total flux cleaned = 0.000843494 Jy ! Component: 1050 - total flux cleaned = 0.0008272 Jy ! Component: 1100 - total flux cleaned = 0.000803399 Jy ! Component: 1150 - total flux cleaned = 0.000780106 Jy ! Component: 1200 - total flux cleaned = 0.000772514 Jy ! Component: 1250 - total flux cleaned = 0.000787661 Jy ! Component: 1300 - total flux cleaned = 0.000772531 Jy ! Component: 1350 - total flux cleaned = 0.000765156 Jy ! Component: 1400 - total flux cleaned = 0.000743304 Jy ! Component: 1450 - total flux cleaned = 0.000728921 Jy ! Component: 1500 - total flux cleaned = 0.000693505 Jy ! Component: 1550 - total flux cleaned = 0.000658512 Jy ! Component: 1600 - total flux cleaned = 0.000651582 Jy ! Component: 1650 - total flux cleaned = 0.000631175 Jy ! Component: 1700 - total flux cleaned = 0.000644692 Jy ! Component: 1750 - total flux cleaned = 0.000618053 Jy ! Component: 1800 - total flux cleaned = 0.000611501 Jy ! Component: 1850 - total flux cleaned = 0.000617856 Jy ! Component: 1900 - total flux cleaned = 0.0005661 Jy ! Component: 1950 - total flux cleaned = 0.000540551 Jy ! Component: 2000 - total flux cleaned = 0.000553192 Jy ! Component: 2050 - total flux cleaned = 0.000540624 Jy ! Component: 2100 - total flux cleaned = 0.000515822 Jy ! Component: 2150 - total flux cleaned = 0.000503565 Jy ! Component: 2200 - total flux cleaned = 0.000479214 Jy ! Component: 2250 - total flux cleaned = 0.00046717 Jy ! Component: 2300 - total flux cleaned = 0.000461186 Jy ! Component: 2350 - total flux cleaned = 0.000449325 Jy ! Component: 2400 - total flux cleaned = 0.000443361 Jy ! Component: 2450 - total flux cleaned = 0.000431646 Jy ! Component: 2500 - total flux cleaned = 0.000425905 Jy ! Component: 2550 - total flux cleaned = 0.000425958 Jy ! Component: 2600 - total flux cleaned = 0.000443016 Jy ! Component: 2650 - total flux cleaned = 0.000414612 Jy ! Component: 2700 - total flux cleaned = 0.000425861 Jy ! Component: 2750 - total flux cleaned = 0.000409157 Jy ! Component: 2800 - total flux cleaned = 0.000403641 Jy ! Component: 2850 - total flux cleaned = 0.000392684 Jy ! Component: 2900 - total flux cleaned = 0.000409086 Jy ! Component: 2950 - total flux cleaned = 0.000419804 Jy ! Component: 3000 - total flux cleaned = 0.000419778 Jy ! Component: 3050 - total flux cleaned = 0.000414441 Jy ! Component: 3100 - total flux cleaned = 0.000419752 Jy ! Component: 3150 - total flux cleaned = 0.000409265 Jy ! Component: 3200 - total flux cleaned = 0.000424997 Jy ! Component: 3250 - total flux cleaned = 0.000430164 Jy ! Component: 3300 - total flux cleaned = 0.000435282 Jy ! Component: 3350 - total flux cleaned = 0.000425047 Jy ! Component: 3400 - total flux cleaned = 0.000440316 Jy ! Component: 3450 - total flux cleaned = 0.000435272 Jy ! Component: 3500 - total flux cleaned = 0.000440327 Jy ! Component: 3550 - total flux cleaned = 0.000465294 Jy ! Component: 3600 - total flux cleaned = 0.000435565 Jy ! Component: 3650 - total flux cleaned = 0.000440512 Jy ! Component: 3700 - total flux cleaned = 0.000445422 Jy ! Component: 3750 - total flux cleaned = 0.000460028 Jy ! Component: 3800 - total flux cleaned = 0.000464838 Jy ! Component: 3850 - total flux cleaned = 0.00045527 Jy ! Component: 3900 - total flux cleaned = 0.000445771 Jy ! Component: 3950 - total flux cleaned = 0.000441017 Jy ! Component: 4000 - total flux cleaned = 0.000431574 Jy ! Component: 4050 - total flux cleaned = 0.00043162 Jy ! Total flux subtracted in 4096 components = 0.00044562 Jy ! Clean residual min=-0.000285 max=0.000325 Jy/beam ! Clean residual mean=0.000000 rms=0.000087 Jy/beam ! Combined flux in latest and established models = 0.0237211 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 362 components and 0.0237211 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0418-0300_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.199 x 4.211 at -19.35 degrees (North through East) ! Clean map min=-0.00052033 max=0.018927 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0418-0300_X_b_map.fits wmodel /vlbi/vcs9/uvm//J0418-0300_X_b_map.mod ! Writing 362 model components to file: /vlbi/vcs9/uvm//J0418-0300_X_b_map.mod wobs /vlbi/vcs9/uvm//J0418-0300_X_b_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0418-0300_X_b_uvs.fits wwins /vlbi/vcs9/uvm//J0418-0300_X_b_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0418-0300_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0189272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.68915e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.37725 1.37725 2.7545 5.509 11.018 22.036 44.072 88.1441 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.018 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 217.825 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0418-0300_X_b_dfm.log closed on Tue Dec 26 21:33:28 2017