! Started logfile: /vlbi/vcs9/uvm//J0339-0146_X_a_dfm.log on Tue Dec 26 21:24:53 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J0339-0146_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0339-0146_X_a_uvm.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! AN table 2: 19 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.95511 visibilities/baseline/integration-bin.
! Found source: J0339-0146
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 8000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J0339-0146_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.68361 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.952086Jy  sigma=49.298655
! Fit after  self-cal, rms=0.719187Jy  sigma=18.466568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.809 mas, bmaj=2.003 mas, bpa=5.552 degrees
! Estimated noise=0.468691 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.40367 Jy
! Component: 100  -  total flux cleaned = 1.60907 Jy
! Total flux subtracted in 100 components = 1.60907 Jy
! Clean residual min=-0.057512 max=0.082229 Jy/beam
! Clean residual mean=0.000005 rms=0.014143 Jy/beam
! Combined flux in latest and established models = 1.60907 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.60907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.286677Jy  sigma=7.489847
! Fit after  self-cal, rms=0.286418Jy  sigma=7.486547
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.38 mas, bpa=7.231 degrees
! Estimated noise=0.314877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.111649 Jy
! Component: 100  -  total flux cleaned = 0.149066 Jy
! Component: 150  -  total flux cleaned = 0.153258 Jy
! Component: 200  -  total flux cleaned = 0.153201 Jy
! Total flux subtracted in 200 components = 0.153201 Jy
! Clean residual min=-0.069378 max=0.117929 Jy/beam
! Clean residual mean=0.000025 rms=0.021807 Jy/beam
! Combined flux in latest and established models = 1.76227 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 1.76227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.260480Jy  sigma=6.780213
! Fit after  self-cal, rms=0.259962Jy  sigma=6.774320
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.986618
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.04     KP        1.02     
!   LA        0.98     MK        0.95     NL        1.09     OV        1.05     
!   SC        1.04     
! 
!  Amplitude normalization factor in sub-array 2: 0.984433
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     FD        0.87     KP        0.94     LA        0.93     
!   NL        1.11     OV        1.13     SC        0.98     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.989929
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.02     KP        1.01     
!   LA        1.00     MK        0.94     NL        1.09     OV        1.03     
!   SC        1.04     
! 
!  Amplitude normalization factor in sub-array 2: 1.0387
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.77     KP        1.04     LA        0.80     
!   NL        1.09     OV        1.05     SC        0.96     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.992494
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.02     KP        1.00     
!   LA        1.00     MK        0.94     NL        1.08     OV        1.02     
!   SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 1.01797
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     FD        0.92     KP        1.17     LA        0.83     
!   NL        1.04     OV        1.14     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.992017
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.02     KP        1.01     
!   LA        0.99     MK        0.95     NL        1.08     OV        1.03     
!   SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.970941
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.90     KP        1.20     LA        0.85     
!   NL        1.18     OV        1.15     SC        0.97     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 0.99733
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.00     KP        1.02     
!   LA        0.99     MK        0.92     NL        1.08     OV        1.02     
!   SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.997796
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.93     KP        1.10     LA        0.85     
!   NL        1.11     OV        1.14     SC        0.93     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 0.996556
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.01     KP        1.02     
!   LA        0.99     MK        0.93     NL        1.07     OV        1.03     
!   SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.992115
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.87     FD        0.93     KP        1.13     LA        0.81     
!   NL        1.20     OV        1.18     SC        0.93     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 0.996475
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        1.01     
!   LA        0.99     MK        0.94     NL        1.07     OV        1.02     
!   SC        1.02     
! 
!  Amplitude normalization factor in sub-array 2: 0.991115
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.98     KP        1.10     LA        0.82     
!   NL        0.96     OV        1.20     SC        0.97     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.99763
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.00     KP        1.02     
!   LA        0.98     MK        0.93     NL        1.08     OV        1.02     
!   SC        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 0.996371
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.98     KP        1.04     LA        0.78     
!   NL        0.93     OV        1.18     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.259962Jy  sigma=6.774320
! Fit after  self-cal, rms=0.181335Jy  sigma=4.740566
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.181335Jy  sigma=4.740566
! Fit after  self-cal, rms=0.181958Jy  sigma=4.736713
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.365 mas, bpa=6.677 degrees
! Estimated noise=0.309642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -16).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.123306 Jy
! Component: 100  -  total flux cleaned = 0.178863 Jy
! Component: 150  -  total flux cleaned = 0.213451 Jy
! Component: 200  -  total flux cleaned = 0.23849 Jy
! Total flux subtracted in 200 components = 0.23849 Jy
! Clean residual min=-0.023483 max=0.045210 Jy/beam
! Clean residual mean=-0.000017 rms=0.007804 Jy/beam
! Combined flux in latest and established models = 2.00076 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 74 components and 2.00076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.112451Jy  sigma=2.834960
! Fit after  self-cal, rms=0.111123Jy  sigma=2.810536
! Inverting map 
! Added new window around map position (3.6, 1.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0515404 Jy
! Component: 100  -  total flux cleaned = 0.076424 Jy
! Component: 150  -  total flux cleaned = 0.0892668 Jy
! Component: 200  -  total flux cleaned = 0.0968365 Jy
! Total flux subtracted in 200 components = 0.0968365 Jy
! Clean residual min=-0.020405 max=0.025146 Jy/beam
! Clean residual mean=-0.000023 rms=0.005582 Jy/beam
! Combined flux in latest and established models = 2.0976 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 107 components and 2.0976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090829Jy  sigma=2.285943
! Fit after  self-cal, rms=0.088729Jy  sigma=2.238197
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088729Jy  sigma=2.238197
! Fit after  self-cal, rms=0.088700Jy  sigma=2.237685
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.6, -27).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0323451 Jy
! Component: 100  -  total flux cleaned = 0.0391356 Jy
! Component: 150  -  total flux cleaned = 0.0416396 Jy
! Component: 200  -  total flux cleaned = 0.043379 Jy
! Total flux subtracted in 200 components = 0.043379 Jy
! Clean residual min=-0.015159 max=0.019502 Jy/beam
! Clean residual mean=-0.000015 rms=0.004197 Jy/beam
! Combined flux in latest and established models = 2.14098 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 136 components and 2.14098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078799Jy  sigma=1.987169
! Fit after  self-cal, rms=0.078109Jy  sigma=1.969735
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 2.365 at 6.677 degrees (North through East)
! Clean map  min=-0.014461  max=1.6633 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078109Jy  sigma=1.969735
! Fit after  self-cal, rms=0.059885Jy  sigma=1.463920
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059885Jy  sigma=1.463920
! Fit after  self-cal, rms=0.059881Jy  sigma=1.463850
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.369 mas, bpa=6.811 degrees
! Estimated noise=0.308459 mJy/beam.
! Added new window around map position (7.4, 39.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.020679 Jy
! Component: 100  -  total flux cleaned = 0.022038 Jy
! Component: 150  -  total flux cleaned = 0.0216888 Jy
! Component: 200  -  total flux cleaned = 0.0213626 Jy
! Total flux subtracted in 200 components = 0.0213626 Jy
! Clean residual min=-0.013262 max=0.013009 Jy/beam
! Clean residual mean=-0.000001 rms=0.002910 Jy/beam
! Combined flux in latest and established models = 2.16234 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 170 components and 2.16234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053484Jy  sigma=1.290206
! Fit after  self-cal, rms=0.052621Jy  sigma=1.275738
! Inverting map 
! Added new window around map position (-23.4, -22.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.013069 Jy
! Component: 100  -  total flux cleaned = 0.0123974 Jy
! Component: 150  -  total flux cleaned = 0.012106 Jy
! Component: 200  -  total flux cleaned = 0.0121113 Jy
! Total flux subtracted in 200 components = 0.0121113 Jy
! Clean residual min=-0.011769 max=0.009996 Jy/beam
! Clean residual mean=-0.000002 rms=0.002387 Jy/beam
! Combined flux in latest and established models = 2.17445 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 195 components and 2.17445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048331Jy  sigma=1.161214
! Fit after  self-cal, rms=0.048036Jy  sigma=1.155684
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=1.994 mas, bpa=5.208 degrees
! Estimated noise=0.461629 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.3828 Jy
! Component: 100  -  total flux cleaned = 1.5969 Jy
! Component: 150  -  total flux cleaned = 1.70187 Jy
! Component: 200  -  total flux cleaned = 1.77199 Jy
! Total flux subtracted in 200 components = 1.77199 Jy
! Clean residual min=-0.026016 max=0.042652 Jy/beam
! Clean residual mean=0.000008 rms=0.006936 Jy/beam
! Combined flux in latest and established models = 1.77199 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.77199 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.369 mas, bpa=6.811 degrees
! Estimated noise=0.308459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 20.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.092402 Jy
! Component: 100  -  total flux cleaned = 0.150888 Jy
! Component: 150  -  total flux cleaned = 0.193969 Jy
! Component: 200  -  total flux cleaned = 0.227435 Jy
! Total flux subtracted in 200 components = 0.227435 Jy
! Clean residual min=-0.016263 max=0.022539 Jy/beam
! Clean residual mean=0.000016 rms=0.005190 Jy/beam
! Combined flux in latest and established models = 1.99943 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 84 components and 1.99943 Jy
! Inverting map 
! Added new window around map position (7.6, 22.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0294951 Jy
! Component: 100  -  total flux cleaned = 0.0515515 Jy
! Component: 150  -  total flux cleaned = 0.0697426 Jy
! Component: 200  -  total flux cleaned = 0.0849631 Jy
! Total flux subtracted in 200 components = 0.0849631 Jy
! Clean residual min=-0.013134 max=0.016206 Jy/beam
! Clean residual mean=0.000008 rms=0.003349 Jy/beam
! Combined flux in latest and established models = 2.08439 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 131 components and 2.08439 Jy
! Inverting map 
! Added new window around map position (-4.2, -2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.015282 Jy
! Component: 100  -  total flux cleaned = 0.0257057 Jy
! Component: 150  -  total flux cleaned = 0.0333094 Jy
! Component: 200  -  total flux cleaned = 0.0378096 Jy
! Total flux subtracted in 200 components = 0.0378096 Jy
! Clean residual min=-0.010444 max=0.010352 Jy/beam
! Clean residual mean=0.000005 rms=0.002534 Jy/beam
! Combined flux in latest and established models = 2.1222 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 165 components and 2.1222 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372606 Jy
! Component: 100  -  total flux cleaned = 0.00651587 Jy
! Component: 150  -  total flux cleaned = 0.00909941 Jy
! Component: 200  -  total flux cleaned = 0.0112301 Jy
! Total flux subtracted in 200 components = 0.0112301 Jy
! Clean residual min=-0.009027 max=0.009722 Jy/beam
! Clean residual mean=0.000003 rms=0.002292 Jy/beam
! Combined flux in latest and established models = 2.13343 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 190 components and 2.13343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044705Jy  sigma=1.077316
! Fit after  self-cal, rms=0.043970Jy  sigma=1.054807
wmodel J0339-0146_X_map.mod
! Writing 190 model components to file: J0339-0146_X_map.mod
wobs   J0339-0146_X_uvs.fits
! Writing UV FITS file: J0339-0146_X_uvs.fits
wwins  J0339-0146_X_map.win
! wwins: Wrote 9 windows to J0339-0146_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393157 Jy
! Component: 100  -  total flux cleaned = 0.00485602 Jy
! Component: 150  -  total flux cleaned = 0.00528142 Jy
! Component: 200  -  total flux cleaned = 0.00555132 Jy
! Component: 250  -  total flux cleaned = 0.00618486 Jy
! Component: 300  -  total flux cleaned = 0.00726506 Jy
! Component: 350  -  total flux cleaned = 0.0076058 Jy
! Component: 400  -  total flux cleaned = 0.00760969 Jy
! Component: 450  -  total flux cleaned = 0.00792612 Jy
! Component: 500  -  total flux cleaned = 0.00751404 Jy
! Component: 550  -  total flux cleaned = 0.00751623 Jy
! Component: 600  -  total flux cleaned = 0.00741932 Jy
! Component: 650  -  total flux cleaned = 0.00732667 Jy
! Component: 700  -  total flux cleaned = 0.00714642 Jy
! Component: 750  -  total flux cleaned = 0.00688387 Jy
! Component: 800  -  total flux cleaned = 0.00662627 Jy
! Component: 850  -  total flux cleaned = 0.00637832 Jy
! Component: 900  -  total flux cleaned = 0.00597182 Jy
! Component: 950  -  total flux cleaned = 0.0054997 Jy
! Component: 1000  -  total flux cleaned = 0.00542202 Jy
! Component: 1050  -  total flux cleaned = 0.00490062 Jy
! Component: 1100  -  total flux cleaned = 0.00446491 Jy
! Component: 1150  -  total flux cleaned = 0.00411279 Jy
! Component: 1200  -  total flux cleaned = 0.00369943 Jy
! Component: 1250  -  total flux cleaned = 0.00342985 Jy
! Component: 1300  -  total flux cleaned = 0.00303519 Jy
! Component: 1350  -  total flux cleaned = 0.00252034 Jy
! Component: 1400  -  total flux cleaned = 0.00220762 Jy
! Component: 1450  -  total flux cleaned = 0.0019628 Jy
! Component: 1500  -  total flux cleaned = 0.00154175 Jy
! Component: 1550  -  total flux cleaned = 0.00130644 Jy
! Component: 1600  -  total flux cleaned = 0.00119062 Jy
! Component: 1650  -  total flux cleaned = 0.000909411 Jy
! Component: 1700  -  total flux cleaned = 0.000743253 Jy
! Component: 1750  -  total flux cleaned = 0.000852298 Jy
! Component: 1800  -  total flux cleaned = 0.000799223 Jy
! Component: 1850  -  total flux cleaned = 0.000747588 Jy
! Component: 1900  -  total flux cleaned = 0.000696656 Jy
! Component: 1950  -  total flux cleaned = 0.000796073 Jy
! Component: 2000  -  total flux cleaned = 0.000697718 Jy
! Component: 2050  -  total flux cleaned = 0.000697447 Jy
! Component: 2100  -  total flux cleaned = 0.000553641 Jy
! Component: 2150  -  total flux cleaned = 0.000460397 Jy
! Component: 2200  -  total flux cleaned = 0.000505232 Jy
! Component: 2250  -  total flux cleaned = 0.000280518 Jy
! Component: 2300  -  total flux cleaned = 0.000280693 Jy
! Component: 2350  -  total flux cleaned = 2.01407e-05 Jy
! Component: 2400  -  total flux cleaned = 6.27324e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000189379 Jy
! Component: 2500  -  total flux cleaned = -0.00027181 Jy
! Component: 2550  -  total flux cleaned = -0.000393947 Jy
! Component: 2600  -  total flux cleaned = -0.000514148 Jy
! Component: 2650  -  total flux cleaned = -0.000593057 Jy
! Component: 2700  -  total flux cleaned = -0.000670865 Jy
! Component: 2750  -  total flux cleaned = -0.00070943 Jy
! Component: 2800  -  total flux cleaned = -0.000822392 Jy
! Component: 2850  -  total flux cleaned = -0.000749157 Jy
! Component: 2900  -  total flux cleaned = -0.000713298 Jy
! Component: 2950  -  total flux cleaned = -0.000605005 Jy
! Component: 3000  -  total flux cleaned = -0.000569371 Jy
! Component: 3050  -  total flux cleaned = -0.000463825 Jy
! Component: 3100  -  total flux cleaned = -0.000498408 Jy
! Component: 3150  -  total flux cleaned = -0.000259657 Jy
! Component: 3200  -  total flux cleaned = -0.000225921 Jy
! Component: 3250  -  total flux cleaned = -0.000226017 Jy
! Component: 3300  -  total flux cleaned = 3.59333e-05 Jy
! Component: 3350  -  total flux cleaned = 0.000132972 Jy
! Component: 3400  -  total flux cleaned = 0.000197006 Jy
! Component: 3450  -  total flux cleaned = 0.000292368 Jy
! Component: 3500  -  total flux cleaned = 0.000510866 Jy
! Component: 3550  -  total flux cleaned = 0.000727094 Jy
! Component: 3600  -  total flux cleaned = 0.000848989 Jy
! Component: 3650  -  total flux cleaned = 0.00100028 Jy
! Component: 3700  -  total flux cleaned = 0.00108987 Jy
! Component: 3750  -  total flux cleaned = 0.00129681 Jy
! Component: 3800  -  total flux cleaned = 0.0013845 Jy
! Component: 3850  -  total flux cleaned = 0.00150032 Jy
! Component: 3900  -  total flux cleaned = 0.001701 Jy
! Component: 3950  -  total flux cleaned = 0.00189928 Jy
! Component: 4000  -  total flux cleaned = 0.00215185 Jy
! Component: 4050  -  total flux cleaned = 0.00220736 Jy
! Total flux subtracted in 4096 components = 0.00229007 Jy
! Clean residual min=-0.001712 max=0.001641 Jy/beam
! Clean residual mean=0.000000 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 2.13572 Jy
keep
! Adding 323 model components to the UV plane model.
! The established model now contains 511 components and 2.13572 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0339-0146_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 2.369 at 6.811 degrees (North through East)
! Clean map  min=-0.0058221  max=1.6541 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0339-0146_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J0339-0146_X_a_map.mod
! Writing 511 model components to file: /vlbi/vcs9/uvm//J0339-0146_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J0339-0146_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0339-0146_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0339-0146_X_a_map.win
! wwins: Wrote 10 windows to /vlbi/vcs9/uvm//J0339-0146_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.65407 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000471626 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0855394 0.0855394 0.171079 0.342158 0.684315 1.36863 2.73726 5.47452 10.949 21.8981 43.7962 87.5924
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.654 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3507.16 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0339-0146_X_a_dfm.log closed on Tue Dec 26 21:24:57 2017