! Started logfile: /vlbi/vcs9/uvm//J0318+4151_X_a_dfm.log on Tue Dec 26 21:21:22 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J0318+4151_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0318+4151_X_a_uvm.fits
! AN table 1: 19 integrations on 28 of 28 possible baselines.
! AN table 2: 125 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.928861 visibilities/baseline/integration-bin.
! Found source: J0318+4151
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 45752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J0318+4151_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0470223 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000512Jy  sigma=22.152775
! Fit after  self-cal, rms=0.978460Jy  sigma=21.661561
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.7881 mas, bmaj=1.789 mas, bpa=-20.53 degrees
! Estimated noise=0.371237 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173359 Jy
! Component: 100  -  total flux cleaned = 0.0218613 Jy
! Total flux subtracted in 100 components = 0.0218613 Jy
! Clean residual min=-0.001394 max=0.001442 Jy/beam
! Clean residual mean=-0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0218613 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0218613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041230Jy  sigma=0.739056
! Fit after  self-cal, rms=0.041225Jy  sigma=0.738820
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.072 mas, bmaj=2.331 mas, bpa=-23.77 degrees
! Estimated noise=0.149242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346786 Jy
! Component: 100  -  total flux cleaned = 0.00463393 Jy
! Component: 150  -  total flux cleaned = 0.0051707 Jy
! Component: 200  -  total flux cleaned = 0.00545403 Jy
! Total flux subtracted in 200 components = 0.00545403 Jy
! Clean residual min=-0.000670 max=0.000790 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0273153 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.0273153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041058Jy  sigma=0.733850
! Fit after  self-cal, rms=0.041058Jy  sigma=0.733837
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.93433
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.06     HN        0.98     KP        0.97     
!   LA        1.15     NL        1.11     OV        0.96     SC        1.08     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.965192
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.90     HN        1.13     KP        1.07     
!   LA        0.96     MK        1.13     NL        0.97     OV        1.10     
!   PT        1.10     SC        1.05     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.968068
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.97     HN        0.99     KP        1.11     
!   LA        1.03     NL        0.91     OV        1.14     SC        0.99     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01454
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.93     HN        1.02     KP        0.97     
!   LA        1.01     MK        1.03     NL        0.96     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.892831
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.26     HN        1.23     KP        0.89     
!   LA        1.03     NL        1.28     OV        0.89     SC        1.18     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.940603
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.20     FD        0.86     HN        1.06     KP        0.97     
!   LA        1.04     MK        1.13     NL        1.05     OV        1.13     
!   PT        1.08     SC        1.11     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.855209
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.34     HN        0.76     KP        1.40     
!   LA        1.06     NL        1.14     OV        1.29     SC        1.18     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.03209
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.94     HN        0.99     KP        0.92     
!   LA        0.95     MK        0.88     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 0.897502
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.33     HN        1.45     KP        1.15     
!   LA        1.13     NL        0.87     OV        0.88     SC        1.01     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.958671
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     FD        1.06     HN        0.91     KP        0.92     
!   LA        1.04     MK        1.05     NL        0.94     OV        1.04     
!   PT        1.10     SC        1.23     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 0.929298
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.18     HN        1.01     KP        1.24     
!   LA        0.98     NL        1.03     OV        0.93     SC        1.06     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.04868
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.93     HN        0.94     KP        0.90     
!   LA        1.00     MK        0.99     NL        0.91     OV        0.95     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 0.913683
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        0.89     KP        1.25     
!   LA        1.10     NL        1.04     OV        0.99     SC        1.52     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.04073
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.88     HN        0.96     KP        0.94     
!   LA        0.99     MK        0.89     NL        1.13     OV        1.01     
!   PT        0.99     SC        0.81     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.874113
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.57     HN        0.95     KP        1.42     
!   LA        0.99     NL        1.75     OV        0.90     SC        0.68     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00615
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.21     FD        0.91     HN        0.96     KP        0.93     
!   LA        1.12     MK        0.96     NL        1.03     OV        0.91     
!   PT        0.99     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.041058Jy  sigma=0.733837
! Fit after  self-cal, rms=0.040953Jy  sigma=0.733150
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040953Jy  sigma=0.733150
! Fit after  self-cal, rms=0.040954Jy  sigma=0.733134
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.286 mas, bpa=-23.43 degrees
! Estimated noise=0.146213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000406126 Jy
! Component: 100  -  total flux cleaned = -0.000444494 Jy
! Component: 150  -  total flux cleaned = -0.000450262 Jy
! Component: 200  -  total flux cleaned = -0.000442324 Jy
! Total flux subtracted in 200 components = -0.000442324 Jy
! Clean residual min=-0.000574 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.026873 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.026873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040955Jy  sigma=0.733036
! Fit after  self-cal, rms=0.040955Jy  sigma=0.733028
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040955Jy  sigma=0.733028
! Fit after  self-cal, rms=0.040931Jy  sigma=0.731994
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.48734e-05 Jy
! Component: 100  -  total flux cleaned = 6.84269e-05 Jy
! Component: 150  -  total flux cleaned = 6.54314e-05 Jy
! Component: 200  -  total flux cleaned = 6.24577e-05 Jy
! Total flux subtracted in 200 components = 6.24577e-05 Jy
! Clean residual min=-0.000582 max=0.000620 Jy/beam
! Clean residual mean=0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0269355 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.0269355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040930Jy  sigma=0.731983
! Fit after  self-cal, rms=0.040935Jy  sigma=0.731794
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 2.286 at -23.43 degrees (North through East)
! Clean map  min=-0.00055694  max=0.021812 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7883 mas, bmaj=1.778 mas, bpa=-20.41 degrees
! Estimated noise=0.364966 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171072 Jy
! Component: 100  -  total flux cleaned = 0.0216559 Jy
! Component: 150  -  total flux cleaned = 0.0238085 Jy
! Component: 200  -  total flux cleaned = 0.0249518 Jy
! Total flux subtracted in 200 components = 0.0249518 Jy
! Clean residual min=-0.001314 max=0.001197 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0249518 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0249518 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.286 mas, bpa=-23.43 degrees
! Estimated noise=0.146213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013178 Jy
! Component: 100  -  total flux cleaned = 0.00178208 Jy
! Component: 150  -  total flux cleaned = 0.00196858 Jy
! Component: 200  -  total flux cleaned = 0.00197318 Jy
! Total flux subtracted in 200 components = 0.00197318 Jy
! Clean residual min=-0.000563 max=0.000619 Jy/beam
! Clean residual mean=0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.026925 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.026925 Jy
! Inverting map 
! Added new window around map position (-16.6, 12.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461688 Jy
! Component: 100  -  total flux cleaned = 0.000505079 Jy
! Component: 150  -  total flux cleaned = 0.000527774 Jy
! Component: 200  -  total flux cleaned = 0.000545921 Jy
! Total flux subtracted in 200 components = 0.000545921 Jy
! Clean residual min=-0.000518 max=0.000537 Jy/beam
! Clean residual mean=0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0274709 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.0274709 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.55905e-05 Jy
! Component: 100  -  total flux cleaned = 2.28636e-05 Jy
! Component: 150  -  total flux cleaned = 3.60221e-05 Jy
! Component: 200  -  total flux cleaned = 4.8148e-05 Jy
! Total flux subtracted in 200 components = 4.8148e-05 Jy
! Clean residual min=-0.000511 max=0.000537 Jy/beam
! Clean residual mean=0.000000 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.027519 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 70 components and 0.0275191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040924Jy  sigma=0.731517
! Fit after  self-cal, rms=0.040928Jy  sigma=0.731441
wmodel J0318+4151_X_map.mod
! Writing 70 model components to file: J0318+4151_X_map.mod
wobs   J0318+4151_X_uvs.fits
! Writing UV FITS file: J0318+4151_X_uvs.fits
wwins  J0318+4151_X_map.win
! wwins: Wrote 2 windows to J0318+4151_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.49894e-05 Jy
! Component: 100  -  total flux cleaned = 0.000154662 Jy
! Component: 150  -  total flux cleaned = 0.000154733 Jy
! Component: 200  -  total flux cleaned = 0.000146526 Jy
! Component: 250  -  total flux cleaned = 0.000138471 Jy
! Component: 300  -  total flux cleaned = 0.000138233 Jy
! Component: 350  -  total flux cleaned = 0.000138068 Jy
! Component: 400  -  total flux cleaned = 0.000145536 Jy
! Component: 450  -  total flux cleaned = 0.000145716 Jy
! Component: 500  -  total flux cleaned = 0.000174439 Jy
! Component: 550  -  total flux cleaned = 0.000188572 Jy
! Component: 600  -  total flux cleaned = 0.000195583 Jy
! Component: 650  -  total flux cleaned = 0.000209319 Jy
! Component: 700  -  total flux cleaned = 0.000215883 Jy
! Component: 750  -  total flux cleaned = 0.00020274 Jy
! Component: 800  -  total flux cleaned = 0.000189895 Jy
! Component: 850  -  total flux cleaned = 0.000196293 Jy
! Component: 900  -  total flux cleaned = 0.000170876 Jy
! Component: 950  -  total flux cleaned = 0.000152127 Jy
! Component: 1000  -  total flux cleaned = 0.000121483 Jy
! Component: 1050  -  total flux cleaned = 0.000127647 Jy
! Component: 1100  -  total flux cleaned = 9.75914e-05 Jy
! Component: 1150  -  total flux cleaned = 9.75705e-05 Jy
! Component: 1200  -  total flux cleaned = 7.39999e-05 Jy
! Component: 1250  -  total flux cleaned = 4.49918e-05 Jy
! Component: 1300  -  total flux cleaned = 4.81381e-06 Jy
! Component: 1350  -  total flux cleaned = -6.58907e-06 Jy
! Component: 1400  -  total flux cleaned = -4.03802e-05 Jy
! Component: 1450  -  total flux cleaned = -7.36828e-05 Jy
! Component: 1500  -  total flux cleaned = -9.01636e-05 Jy
! Component: 1550  -  total flux cleaned = -0.00012276 Jy
! Component: 1600  -  total flux cleaned = -0.000128106 Jy
! Component: 1650  -  total flux cleaned = -0.000149392 Jy
! Component: 1700  -  total flux cleaned = -0.000160006 Jy
! Component: 1750  -  total flux cleaned = -0.000180994 Jy
! Component: 1800  -  total flux cleaned = -0.000175764 Jy
! Component: 1850  -  total flux cleaned = -0.000191254 Jy
! Component: 1900  -  total flux cleaned = -0.000221854 Jy
! Component: 1950  -  total flux cleaned = -0.000237126 Jy
! Component: 2000  -  total flux cleaned = -0.000272256 Jy
! Component: 2050  -  total flux cleaned = -0.000267308 Jy
! Component: 2100  -  total flux cleaned = -0.000287096 Jy
! Component: 2150  -  total flux cleaned = -0.000287067 Jy
! Component: 2200  -  total flux cleaned = -0.000306503 Jy
! Component: 2250  -  total flux cleaned = -0.000306445 Jy
! Component: 2300  -  total flux cleaned = -0.000311238 Jy
! Component: 2350  -  total flux cleaned = -0.000320759 Jy
! Component: 2400  -  total flux cleaned = -0.000348973 Jy
! Component: 2450  -  total flux cleaned = -0.000377071 Jy
! Component: 2500  -  total flux cleaned = -0.000386386 Jy
! Component: 2550  -  total flux cleaned = -0.000395607 Jy
! Component: 2600  -  total flux cleaned = -0.000409353 Jy
! Component: 2650  -  total flux cleaned = -0.000423023 Jy
! Component: 2700  -  total flux cleaned = -0.000445637 Jy
! Component: 2750  -  total flux cleaned = -0.000463624 Jy
! Component: 2800  -  total flux cleaned = -0.000481421 Jy
! Component: 2850  -  total flux cleaned = -0.000503513 Jy
! Component: 2900  -  total flux cleaned = -0.000516731 Jy
! Component: 2950  -  total flux cleaned = -0.000564729 Jy
! Component: 3000  -  total flux cleaned = -0.000564723 Jy
! Component: 3050  -  total flux cleaned = -0.000581897 Jy
! Component: 3100  -  total flux cleaned = -0.000586147 Jy
! Component: 3150  -  total flux cleaned = -0.000603179 Jy
! Component: 3200  -  total flux cleaned = -0.000620098 Jy
! Component: 3250  -  total flux cleaned = -0.000645245 Jy
! Component: 3300  -  total flux cleaned = -0.000649435 Jy
! Component: 3350  -  total flux cleaned = -0.000657741 Jy
! Component: 3400  -  total flux cleaned = -0.000661893 Jy
! Component: 3450  -  total flux cleaned = -0.000694655 Jy
! Component: 3500  -  total flux cleaned = -0.000690552 Jy
! Component: 3550  -  total flux cleaned = -0.000714802 Jy
! Component: 3600  -  total flux cleaned = -0.00071878 Jy
! Component: 3650  -  total flux cleaned = -0.000730794 Jy
! Component: 3700  -  total flux cleaned = -0.000746698 Jy
! Component: 3750  -  total flux cleaned = -0.00076255 Jy
! Component: 3800  -  total flux cleaned = -0.000786162 Jy
! Component: 3850  -  total flux cleaned = -0.000782246 Jy
! Component: 3900  -  total flux cleaned = -0.000797843 Jy
! Component: 3950  -  total flux cleaned = -0.000821115 Jy
! Component: 4000  -  total flux cleaned = -0.000824942 Jy
! Component: 4050  -  total flux cleaned = -0.000836419 Jy
! Total flux subtracted in 4096 components = -0.000851675 Jy
! Clean residual min=-0.000254 max=0.000240 Jy/beam
! Clean residual mean=-0.000000 rms=0.000069 Jy/beam
! Combined flux in latest and established models = 0.0266674 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 382 components and 0.0266674 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0318+4151_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 2.286 at -23.43 degrees (North through East)
! Clean map  min=-0.00036294  max=0.021718 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0318+4151_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J0318+4151_X_a_map.mod
! Writing 382 model components to file: /vlbi/vcs9/uvm//J0318+4151_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J0318+4151_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0318+4151_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0318+4151_X_a_map.win
! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0318+4151_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0217176 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.89523e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.952486 0.952486 1.90497 3.80994 7.61989 15.2398 30.4795 60.9591
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.021 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  314.965 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0318+4151_X_a_dfm.log closed on Tue Dec 26 21:21:27 2017