! Started logfile: /vlbi/vcs9/uvm//J0318+4151_C_b_dfm.log on Tue Dec 26 21:21:17 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J0318+4151_C_b_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0318+4151_C_b_uvm.fits ! AN table 1: 17 integrations on 3 of 3 possible baselines. ! AN table 2: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.802584 visibilities/baseline/integration-bin. ! Found source: J0318+4151 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 22864 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J0318+4151_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0291704 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000046Jy sigma=33.882404 ! Fit after self-cal, rms=0.986272Jy sigma=33.447449 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.253 mas, bmaj=4.117 mas, bpa=14.65 degrees ! Estimated noise=0.296738 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107266 Jy ! Component: 100 - total flux cleaned = 0.0136594 Jy ! Total flux subtracted in 100 components = 0.0136594 Jy ! Clean residual min=-0.001195 max=0.001517 Jy/beam ! Clean residual mean=-0.000000 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0136594 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0136594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025418Jy sigma=0.764692 ! Fit after self-cal, rms=0.025397Jy sigma=0.763790 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.662 mas, bmaj=4.429 mas, bpa=12.96 degrees ! Estimated noise=0.138052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252896 Jy ! Component: 100 - total flux cleaned = 0.00388476 Jy ! Component: 150 - total flux cleaned = 0.00456265 Jy ! Component: 200 - total flux cleaned = 0.00482394 Jy ! Total flux subtracted in 200 components = 0.00482394 Jy ! Clean residual min=-0.000825 max=0.001143 Jy/beam ! Clean residual mean=-0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0184834 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.0184834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025126Jy sigma=0.756742 ! Fit after self-cal, rms=0.025112Jy sigma=0.756455 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03061 ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.95 HN 1.11 KP 0.90 ! LA 0.90 MK 0.95 NL 1.06 OV 0.96 ! PT 0.90 SC 1.09 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.06951 ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.88 HN 1.08 KP 1.02 ! LA 0.81 MK 0.83 NL 1.23 OV 0.86 ! PT 0.91 SC 0.87 ! ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.997072 ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.04 HN 1.09 KP 1.15 ! LA 0.88 MK 0.92 NL 0.96 OV 0.88 ! PT 0.93 SC 1.15 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.04887 ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.86 HN 0.98 KP 0.97 ! LA 0.99 MK 0.86 NL 1.14 OV 0.99 ! PT 0.86 SC 0.89 ! ! ! Correcting IF 5. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.08807 ! Telescope amplitude corrections in sub-array 2: ! BR 0.79 FD 0.86 HN 0.96 KP 0.82 ! LA 0.91 MK 0.93 NL 0.97 OV 0.95 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 6. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.954658 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.98 HN 1.22 KP 0.89 ! LA 0.90 MK 1.35 NL 1.06 OV 0.97 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 7. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.795272 ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.16 HN 1.79 KP 1.13 ! LA 0.84 MK 1.21 NL 1.76 OV 0.98 ! PT 1.27 SC 1.36 ! ! ! Correcting IF 8. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* KP 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.912965 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.88 HN 1.37 KP 1.15 ! LA 0.97 MK 1.05 NL 1.14 OV 1.05 ! PT 1.08 SC 1.31 ! ! ! Fit before self-cal, rms=0.025112Jy sigma=0.756455 ! Fit after self-cal, rms=0.024238Jy sigma=0.759146 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024238Jy sigma=0.759146 ! Fit after self-cal, rms=0.024239Jy sigma=0.759128 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.748 mas, bmaj=4.55 mas, bpa=13.98 degrees ! Estimated noise=0.133544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000768155 Jy ! Component: 100 - total flux cleaned = -0.00111358 Jy ! Component: 150 - total flux cleaned = -0.00130878 Jy ! Component: 200 - total flux cleaned = -0.00145296 Jy ! Total flux subtracted in 200 components = -0.00145296 Jy ! Clean residual min=-0.000866 max=0.000626 Jy/beam ! Clean residual mean=0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0170304 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 66 components and 0.0170304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024236Jy sigma=0.758357 ! Fit after self-cal, rms=0.024236Jy sigma=0.758344 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024236Jy sigma=0.758344 ! Fit after self-cal, rms=0.024168Jy sigma=0.755009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121745 Jy ! Component: 100 - total flux cleaned = -0.000162322 Jy ! Component: 150 - total flux cleaned = -0.000173185 Jy ! Component: 200 - total flux cleaned = -0.000182865 Jy ! Total flux subtracted in 200 components = -0.000182865 Jy ! Clean residual min=-0.000832 max=0.000626 Jy/beam ! Clean residual mean=0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.0168476 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.0168476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024166Jy sigma=0.754919 ! Fit after self-cal, rms=0.024157Jy sigma=0.754513 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.748 x 4.55 at 13.98 degrees (North through East) ! Clean map min=-0.00079236 max=0.012565 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.268 mas, bmaj=4.15 mas, bpa=14.99 degrees ! Estimated noise=0.298823 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104139 Jy ! Component: 100 - total flux cleaned = 0.0130353 Jy ! Component: 150 - total flux cleaned = 0.0144691 Jy ! Component: 200 - total flux cleaned = 0.015388 Jy ! Total flux subtracted in 200 components = 0.015388 Jy ! Clean residual min=-0.000890 max=0.001026 Jy/beam ! Clean residual mean=0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0153881 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0153881 Jy ! Inverting map and beam ! Estimated beam: bmin=1.748 mas, bmaj=4.55 mas, bpa=13.98 degrees ! Estimated noise=0.133544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.8, -44.7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928852 Jy ! Component: 100 - total flux cleaned = 0.00120077 Jy ! Component: 150 - total flux cleaned = 0.00126314 Jy ! Component: 200 - total flux cleaned = 0.00129809 Jy ! Total flux subtracted in 200 components = 0.00129809 Jy ! Clean residual min=-0.000692 max=0.000612 Jy/beam ! Clean residual mean=0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.0166861 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.0166861 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.98817e-05 Jy ! Component: 100 - total flux cleaned = 4.2042e-05 Jy ! Component: 150 - total flux cleaned = 5.44022e-05 Jy ! Component: 200 - total flux cleaned = 6.54248e-05 Jy ! Total flux subtracted in 200 components = 6.54248e-05 Jy ! Clean residual min=-0.000709 max=0.000591 Jy/beam ! Clean residual mean=0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0167516 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 0.0167516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024144Jy sigma=0.753799 ! Fit after self-cal, rms=0.024139Jy sigma=0.753594 wmodel J0318+4151_C_map.mod ! Writing 70 model components to file: J0318+4151_C_map.mod wobs J0318+4151_C_uvs.fits ! Writing UV FITS file: J0318+4151_C_uvs.fits wwins J0318+4151_C_map.win ! wwins: Wrote 3 windows to J0318+4151_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231995 Jy ! Component: 100 - total flux cleaned = -0.000274805 Jy ! Component: 150 - total flux cleaned = -0.000198793 Jy ! Component: 200 - total flux cleaned = -0.00013589 Jy ! Component: 250 - total flux cleaned = -0.000101577 Jy ! Component: 300 - total flux cleaned = -9.30473e-05 Jy ! Component: 350 - total flux cleaned = -6.88068e-05 Jy ! Component: 400 - total flux cleaned = -5.31994e-05 Jy ! Component: 450 - total flux cleaned = -4.5607e-05 Jy ! Component: 500 - total flux cleaned = -3.82836e-05 Jy ! Component: 550 - total flux cleaned = -3.83732e-05 Jy ! Component: 600 - total flux cleaned = -3.14793e-05 Jy ! Component: 650 - total flux cleaned = -3.14765e-05 Jy ! Component: 700 - total flux cleaned = -3.80258e-05 Jy ! Component: 750 - total flux cleaned = -2.49874e-05 Jy ! Component: 800 - total flux cleaned = -3.14498e-05 Jy ! Component: 850 - total flux cleaned = -3.76991e-05 Jy ! Component: 900 - total flux cleaned = -2.53921e-05 Jy ! Component: 950 - total flux cleaned = -2.55288e-05 Jy ! Component: 1000 - total flux cleaned = -3.14145e-05 Jy ! Component: 1050 - total flux cleaned = -2.5586e-05 Jy ! Component: 1100 - total flux cleaned = -1.98964e-05 Jy ! Component: 1150 - total flux cleaned = -2.54176e-05 Jy ! Component: 1200 - total flux cleaned = -1.44778e-05 Jy ! Component: 1250 - total flux cleaned = -1.45874e-05 Jy ! Component: 1300 - total flux cleaned = -1.99987e-05 Jy ! Component: 1350 - total flux cleaned = -1.99419e-05 Jy ! Component: 1400 - total flux cleaned = -9.76749e-06 Jy ! Component: 1450 - total flux cleaned = -9.77742e-06 Jy ! Component: 1500 - total flux cleaned = -1.97111e-05 Jy ! Component: 1550 - total flux cleaned = -2.4644e-05 Jy ! Component: 1600 - total flux cleaned = -2.94213e-05 Jy ! Component: 1650 - total flux cleaned = -3.41864e-05 Jy ! Component: 1700 - total flux cleaned = -3.89346e-05 Jy ! Component: 1750 - total flux cleaned = -4.8288e-05 Jy ! Component: 1800 - total flux cleaned = -7.13361e-05 Jy ! Component: 1850 - total flux cleaned = -8.04567e-05 Jy ! Component: 1900 - total flux cleaned = -7.5917e-05 Jy ! Component: 1950 - total flux cleaned = -8.48139e-05 Jy ! Component: 2000 - total flux cleaned = -8.03504e-05 Jy ! Component: 2050 - total flux cleaned = -9.34786e-05 Jy ! Component: 2100 - total flux cleaned = -9.77747e-05 Jy ! Component: 2150 - total flux cleaned = -8.92626e-05 Jy ! Component: 2200 - total flux cleaned = -0.00010189 Jy ! Component: 2250 - total flux cleaned = -9.76207e-05 Jy ! Component: 2300 - total flux cleaned = -0.000101689 Jy ! Component: 2350 - total flux cleaned = -9.75952e-05 Jy ! Component: 2400 - total flux cleaned = -0.000105731 Jy ! Component: 2450 - total flux cleaned = -0.00010971 Jy ! Component: 2500 - total flux cleaned = -0.000109735 Jy ! Component: 2550 - total flux cleaned = -0.000117647 Jy ! Component: 2600 - total flux cleaned = -0.000125429 Jy ! Component: 2650 - total flux cleaned = -0.000113849 Jy ! Component: 2700 - total flux cleaned = -0.000121522 Jy ! Component: 2750 - total flux cleaned = -0.000110137 Jy ! Component: 2800 - total flux cleaned = -0.000102634 Jy ! Component: 2850 - total flux cleaned = -0.000106347 Jy ! Component: 2900 - total flux cleaned = -9.52879e-05 Jy ! Component: 2950 - total flux cleaned = -9.16675e-05 Jy ! Component: 3000 - total flux cleaned = -9.16639e-05 Jy ! Component: 3050 - total flux cleaned = -9.52446e-05 Jy ! Component: 3100 - total flux cleaned = -9.1667e-05 Jy ! Component: 3150 - total flux cleaned = -8.81211e-05 Jy ! Component: 3200 - total flux cleaned = -8.45806e-05 Jy ! Component: 3250 - total flux cleaned = -7.75929e-05 Jy ! Component: 3300 - total flux cleaned = -9.14479e-05 Jy ! Component: 3350 - total flux cleaned = -7.76528e-05 Jy ! Component: 3400 - total flux cleaned = -7.07945e-05 Jy ! Component: 3450 - total flux cleaned = -7.41889e-05 Jy ! Component: 3500 - total flux cleaned = -8.09451e-05 Jy ! Component: 3550 - total flux cleaned = -8.42597e-05 Jy ! Component: 3600 - total flux cleaned = -8.75399e-05 Jy ! Component: 3650 - total flux cleaned = -9.4131e-05 Jy ! Component: 3700 - total flux cleaned = -0.000100658 Jy ! Component: 3750 - total flux cleaned = -0.000100659 Jy ! Component: 3800 - total flux cleaned = -0.000107131 Jy ! Component: 3850 - total flux cleaned = -0.00010389 Jy ! Component: 3900 - total flux cleaned = -0.000116705 Jy ! Component: 3950 - total flux cleaned = -0.000116697 Jy ! Component: 4000 - total flux cleaned = -0.000113519 Jy ! Component: 4050 - total flux cleaned = -0.000119841 Jy ! Total flux subtracted in 4096 components = -0.000132345 Jy ! Clean residual min=-0.000224 max=0.000161 Jy/beam ! Clean residual mean=0.000001 rms=0.000057 Jy/beam ! Combined flux in latest and established models = 0.0166192 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 374 components and 0.0166192 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0318+4151_C_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.748 x 4.55 at 13.98 degrees (North through East) ! Clean map min=-0.00046058 max=0.012808 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0318+4151_C_b_map.fits wmodel /vlbi/vcs9/uvm//J0318+4151_C_b_map.mod ! Writing 374 model components to file: /vlbi/vcs9/uvm//J0318+4151_C_b_map.mod wobs /vlbi/vcs9/uvm//J0318+4151_C_b_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0318+4151_C_b_uvs.fits wwins /vlbi/vcs9/uvm//J0318+4151_C_b_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J0318+4151_C_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0128077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.6144e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31508 1.31508 2.63017 5.26033 10.5207 21.0413 42.0827 84.1653 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.012 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 228.122 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0318+4151_C_b_dfm.log closed on Tue Dec 26 21:21:21 2017