! Started logfile: /vlbi/vcs9/uvm//J0317-0417_X_a_dfm.log on Tue Dec 26 21:20:36 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0317-0417_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0317-0417_X_a_uvm.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! AN table 2: 19 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.98263 visibilities/baseline/integration-bin. ! Found source: J0317-0417 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 9504 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0317-0417_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.03623 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000153Jy sigma=23.812651 ! Fit after self-cal, rms=0.984475Jy sigma=23.457269 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7978 mas, bmaj=2.074 mas, bpa=-4.775 degrees ! Estimated noise=0.446637 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129633 Jy ! Component: 100 - total flux cleaned = 0.0148833 Jy ! Total flux subtracted in 100 components = 0.0148833 Jy ! Clean residual min=-0.001554 max=0.001856 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0148833 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0148833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032500Jy sigma=0.693945 ! Fit after self-cal, rms=0.032471Jy sigma=0.693197 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=2.431 mas, bpa=-4.351 degrees ! Estimated noise=0.304548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013952 Jy ! Component: 100 - total flux cleaned = 0.00203386 Jy ! Component: 150 - total flux cleaned = 0.0023555 Jy ! Component: 200 - total flux cleaned = 0.00247214 Jy ! Total flux subtracted in 200 components = 0.00247214 Jy ! Clean residual min=-0.001063 max=0.001282 Jy/beam ! Clean residual mean=0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0173555 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.0173555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032415Jy sigma=0.692137 ! Fit after self-cal, rms=0.032416Jy sigma=0.692131 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.913655 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 1.18 KP 1.21 ! LA 1.18 MK 1.16 NL 1.10 OV 1.08 ! PT 1.20 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 1.09522 ! Telescope amplitude corrections in sub-array 2: ! HN 0.76 KP 0.94 LA 0.74 MK 0.92 ! NL 1.00 OV 0.90 SC 1.13 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.896001 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.14 KP 0.91 ! LA 0.96 MK 1.80 NL 0.94 OV 1.11 ! PT 0.94 SC 1.48 ! ! Amplitude normalization factor in sub-array 2: 1.16084 ! Telescope amplitude corrections in sub-array 2: ! HN 0.82 KP 0.80 LA 1.00 MK 0.91 ! NL 0.78 OV 0.79 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.940436 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.86 HN 1.20 KP 0.88 ! LA 1.36 MK 1.44 NL 0.91 OV 1.04 ! PT 0.97 SC 1.05 ! ! Amplitude normalization factor in sub-array 2: 1.10492 ! Telescope amplitude corrections in sub-array 2: ! HN 0.88 KP 0.95 LA 0.87 MK 0.92 ! NL 1.03 OV 0.80 SC 0.89 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.874189 ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.82 HN 1.23 KP 1.32 ! LA 0.99 MK 1.08 NL 1.06 OV 1.21 ! PT 1.48 SC 1.08 ! ! Amplitude normalization factor in sub-array 2: 1.11355 ! Telescope amplitude corrections in sub-array 2: ! HN 0.74 KP 1.04 LA 1.17 MK 0.77 ! NL 1.22 OV 0.76 SC 0.59 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.95911 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.23 HN 1.23 KP 0.94 ! LA 0.85 MK 1.07 NL 0.93 OV 1.06 ! PT 0.98 SC 1.23 ! ! Amplitude normalization factor in sub-array 2: 1.16647 ! Telescope amplitude corrections in sub-array 2: ! HN 0.69 KP 0.91 LA 0.74 MK 0.87 ! NL 1.10 OV 0.89 SC 0.80 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.872934 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.09 HN 0.89 KP 1.15 ! LA 1.59 MK 0.85 NL 1.13 OV 1.17 ! PT 1.31 SC 1.40 ! ! Amplitude normalization factor in sub-array 2: 1.11846 ! Telescope amplitude corrections in sub-array 2: ! HN 0.68 KP 0.70 LA 0.94 MK 0.82 ! NL 1.22 OV 1.07 SC 0.83 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.945462 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.07 KP 0.99 ! LA 1.14 MK 1.27 NL 1.10 OV 1.28 ! PT 0.94 SC 0.86 ! ! Amplitude normalization factor in sub-array 2: 1.21549 ! Telescope amplitude corrections in sub-array 2: ! HN 0.73 KP 0.71 LA 0.90 MK 0.96 ! NL 0.81 OV 0.79 SC 0.86 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.944095 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.85 HN 1.07 KP 1.19 ! LA 1.00 MK 0.92 NL 1.05 OV 1.11 ! PT 1.41 SC 1.02 ! ! Amplitude normalization factor in sub-array 2: 1.07946 ! Telescope amplitude corrections in sub-array 2: ! HN 0.84 KP 0.91 LA 0.92 MK 1.07 ! NL 1.17 OV 0.67 SC 0.91 ! ! ! Fit before self-cal, rms=0.032416Jy sigma=0.692131 ! Fit after self-cal, rms=0.032494Jy sigma=0.689421 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032494Jy sigma=0.689421 ! Fit after self-cal, rms=0.032500Jy sigma=0.689373 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=2.459 mas, bpa=-3.804 degrees ! Estimated noise=0.28161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000982397 Jy ! Component: 100 - total flux cleaned = -0.00118485 Jy ! Component: 150 - total flux cleaned = -0.00121153 Jy ! Component: 200 - total flux cleaned = -0.00120427 Jy ! Total flux subtracted in 200 components = -0.00120427 Jy ! Clean residual min=-0.000867 max=0.001181 Jy/beam ! Clean residual mean=0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0161512 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.0161512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032509Jy sigma=0.688760 ! Fit after self-cal, rms=0.032507Jy sigma=0.688755 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032507Jy sigma=0.688755 ! Fit after self-cal, rms=0.032493Jy sigma=0.687965 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.68733e-05 Jy ! Component: 100 - total flux cleaned = 6.22925e-05 Jy ! Component: 150 - total flux cleaned = 6.72577e-05 Jy ! Component: 200 - total flux cleaned = 7.74932e-05 Jy ! Total flux subtracted in 200 components = 7.74932e-05 Jy ! Clean residual min=-0.000849 max=0.001179 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.0162287 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0162287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032492Jy sigma=0.687921 ! Fit after self-cal, rms=0.032493Jy sigma=0.687827 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.036 x 2.459 at -3.804 degrees (North through East) ! Clean map min=-0.00082961 max=0.014289 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8045 mas, bmaj=2.074 mas, bpa=-4.206 degrees ! Estimated noise=0.429621 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125785 Jy ! Component: 100 - total flux cleaned = 0.0143591 Jy ! Component: 150 - total flux cleaned = 0.0150534 Jy ! Component: 200 - total flux cleaned = 0.0154604 Jy ! Total flux subtracted in 200 components = 0.0154604 Jy ! Clean residual min=-0.001502 max=0.001715 Jy/beam ! Clean residual mean=0.000000 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0154604 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0154604 Jy ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=2.459 mas, bpa=-3.804 degrees ! Estimated noise=0.28161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 45.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896762 Jy ! Component: 100 - total flux cleaned = 0.00118359 Jy ! Component: 150 - total flux cleaned = 0.0014486 Jy ! Component: 200 - total flux cleaned = 0.00159731 Jy ! Total flux subtracted in 200 components = 0.00159731 Jy ! Clean residual min=-0.000939 max=0.001034 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0170577 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.0170577 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.95276e-05 Jy ! Component: 100 - total flux cleaned = 0.000105861 Jy ! Component: 150 - total flux cleaned = 0.000117079 Jy ! Component: 200 - total flux cleaned = 0.000127973 Jy ! Total flux subtracted in 200 components = 0.000127973 Jy ! Clean residual min=-0.000925 max=0.001015 Jy/beam ! Clean residual mean=-0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0171857 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.0171857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032436Jy sigma=0.686809 ! Fit after self-cal, rms=0.032434Jy sigma=0.686648 wmodel J0317-0417_X_map.mod ! Writing 50 model components to file: J0317-0417_X_map.mod wobs J0317-0417_X_uvs.fits ! Writing UV FITS file: J0317-0417_X_uvs.fits wwins J0317-0417_X_map.win ! wwins: Wrote 2 windows to J0317-0417_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372717 Jy ! Component: 100 - total flux cleaned = 0.000572468 Jy ! Component: 150 - total flux cleaned = 0.000759498 Jy ! Component: 200 - total flux cleaned = 0.000996767 Jy ! Component: 250 - total flux cleaned = 0.00119444 Jy ! Component: 300 - total flux cleaned = 0.00133019 Jy ! Component: 350 - total flux cleaned = 0.00148705 Jy ! Component: 400 - total flux cleaned = 0.00162579 Jy ! Component: 450 - total flux cleaned = 0.00174743 Jy ! Component: 500 - total flux cleaned = 0.00182996 Jy ! Component: 550 - total flux cleaned = 0.00187555 Jy ! Component: 600 - total flux cleaned = 0.00194213 Jy ! Component: 650 - total flux cleaned = 0.0019633 Jy ! Component: 700 - total flux cleaned = 0.00200582 Jy ! Component: 750 - total flux cleaned = 0.00205752 Jy ! Component: 800 - total flux cleaned = 0.0020881 Jy ! Component: 850 - total flux cleaned = 0.00214788 Jy ! Component: 900 - total flux cleaned = 0.00222575 Jy ! Component: 950 - total flux cleaned = 0.0022824 Jy ! Component: 1000 - total flux cleaned = 0.00230107 Jy ! Component: 1050 - total flux cleaned = 0.00237455 Jy ! Component: 1100 - total flux cleaned = 0.00241066 Jy ! Component: 1150 - total flux cleaned = 0.00247265 Jy ! Component: 1200 - total flux cleaned = 0.00249008 Jy ! Component: 1250 - total flux cleaned = 0.00253287 Jy ! Component: 1300 - total flux cleaned = 0.00258336 Jy ! Component: 1350 - total flux cleaned = 0.00260827 Jy ! Component: 1400 - total flux cleaned = 0.0026328 Jy ! Component: 1450 - total flux cleaned = 0.00264092 Jy ! Component: 1500 - total flux cleaned = 0.00265693 Jy ! Component: 1550 - total flux cleaned = 0.00265715 Jy ! Component: 1600 - total flux cleaned = 0.00271132 Jy ! Component: 1650 - total flux cleaned = 0.00270378 Jy ! Component: 1700 - total flux cleaned = 0.00274908 Jy ! Component: 1750 - total flux cleaned = 0.00278621 Jy ! Component: 1800 - total flux cleaned = 0.00278627 Jy ! Component: 1850 - total flux cleaned = 0.00282252 Jy ! Component: 1900 - total flux cleaned = 0.00284401 Jy ! Component: 1950 - total flux cleaned = 0.00287215 Jy ! Component: 2000 - total flux cleaned = 0.00288604 Jy ! Component: 2050 - total flux cleaned = 0.0029136 Jy ! Component: 2100 - total flux cleaned = 0.00291355 Jy ! Component: 2150 - total flux cleaned = 0.00294061 Jy ! Component: 2200 - total flux cleaned = 0.00295392 Jy ! Component: 2250 - total flux cleaned = 0.00296046 Jy ! Component: 2300 - total flux cleaned = 0.00301271 Jy ! Component: 2350 - total flux cleaned = 0.0030191 Jy ! Component: 2400 - total flux cleaned = 0.00303828 Jy ! Component: 2450 - total flux cleaned = 0.0030383 Jy ! Component: 2500 - total flux cleaned = 0.0030948 Jy ! Component: 2550 - total flux cleaned = 0.0030948 Jy ! Component: 2600 - total flux cleaned = 0.00308872 Jy ! Component: 2650 - total flux cleaned = 0.00313136 Jy ! Component: 2700 - total flux cleaned = 0.00313735 Jy ! Component: 2750 - total flux cleaned = 0.00315533 Jy ! Component: 2800 - total flux cleaned = 0.00318491 Jy ! Component: 2850 - total flux cleaned = 0.00319665 Jy ! Component: 2900 - total flux cleaned = 0.00320831 Jy ! Component: 2950 - total flux cleaned = 0.00321989 Jy ! Component: 3000 - total flux cleaned = 0.00326576 Jy ! Component: 3050 - total flux cleaned = 0.00324876 Jy ! Component: 3100 - total flux cleaned = 0.00329383 Jy ! Component: 3150 - total flux cleaned = 0.00330492 Jy ! Component: 3200 - total flux cleaned = 0.00329943 Jy ! Component: 3250 - total flux cleaned = 0.00328841 Jy ! Component: 3300 - total flux cleaned = 0.00331566 Jy ! Component: 3350 - total flux cleaned = 0.00331564 Jy ! Component: 3400 - total flux cleaned = 0.00333708 Jy ! Component: 3450 - total flux cleaned = 0.00333708 Jy ! Component: 3500 - total flux cleaned = 0.00335823 Jy ! Component: 3550 - total flux cleaned = 0.00333719 Jy ! Component: 3600 - total flux cleaned = 0.003358 Jy ! Component: 3650 - total flux cleaned = 0.00337863 Jy ! Component: 3700 - total flux cleaned = 0.00336834 Jy ! Component: 3750 - total flux cleaned = 0.00339382 Jy ! Component: 3800 - total flux cleaned = 0.00340393 Jy ! Component: 3850 - total flux cleaned = 0.00340398 Jy ! Component: 3900 - total flux cleaned = 0.00342395 Jy ! Component: 3950 - total flux cleaned = 0.00345357 Jy ! Component: 4000 - total flux cleaned = 0.00347808 Jy ! Component: 4050 - total flux cleaned = 0.00347806 Jy ! Total flux subtracted in 4096 components = 0.00348777 Jy ! Clean residual min=-0.000301 max=0.000299 Jy/beam ! Clean residual mean=-0.000000 rms=0.000085 Jy/beam ! Combined flux in latest and established models = 0.0206735 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 337 components and 0.0206734 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0317-0417_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.036 x 2.459 at -3.804 degrees (North through East) ! Clean map min=-0.00069164 max=0.014363 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0317-0417_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0317-0417_X_a_map.mod ! Writing 337 model components to file: /vlbi/vcs9/uvm//J0317-0417_X_a_map.mod wobs /vlbi/vcs9/uvm//J0317-0417_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0317-0417_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0317-0417_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0317-0417_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0143631 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.31434e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.7366 1.7366 3.4732 6.9464 13.8928 27.7856 55.5712 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.014 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 172.751 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0317-0417_X_a_dfm.log closed on Tue Dec 26 21:20:39 2017