! Started logfile: /vlbi/vcs9/uvm//J0240+0731_C_a_dfm.log on Tue Dec 26 21:16:10 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J0240+0731_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0240+0731_C_a_uvm.fits ! AN table 1: 150 integrations on 28 of 28 possible baselines. ! AN table 2: 150 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.994524 visibilities/baseline/integration-bin. ! Found source: J0240+0731 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 66832 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J0240+0731_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0266299 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000543Jy sigma=28.663793 ! Fit after self-cal, rms=0.990584Jy sigma=28.398045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.388 mas, bmaj=3.173 mas, bpa=1.446 degrees ! Estimated noise=0.219831 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839833 Jy ! Component: 100 - total flux cleaned = 0.00948325 Jy ! Total flux subtracted in 100 components = 0.00948325 Jy ! Clean residual min=-0.000868 max=0.000841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.00948325 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.00948325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024792Jy sigma=0.656519 ! Fit after self-cal, rms=0.024783Jy sigma=0.656219 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.804 mas, bmaj=3.846 mas, bpa=2.421 degrees ! Estimated noise=0.095465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363745 Jy ! Component: 100 - total flux cleaned = -0.000510118 Jy ! Component: 150 - total flux cleaned = -0.000546367 Jy ! Component: 200 - total flux cleaned = -0.000568674 Jy ! Total flux subtracted in 200 components = -0.000568674 Jy ! Clean residual min=-0.000693 max=0.000706 Jy/beam ! Clean residual mean=-0.000003 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.00891458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.00891458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024789Jy sigma=0.656110 ! Fit after self-cal, rms=0.024788Jy sigma=0.656079 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.18132 ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.82 LA 0.74 MK 0.78 ! NL 0.88 OV 0.91 PT 1.00 SC 0.83 ! ! Amplitude normalization factor in sub-array 2: 1.22309 ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 FD 0.52 HN 0.82 KP 0.83 ! LA 0.85 NL 0.85 PT 0.90 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.06566 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.86 LA 0.96 MK 0.87 ! NL 1.02 OV 0.89 PT 0.98 SC 0.94 ! ! Amplitude normalization factor in sub-array 2: 1.18148 ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.59 HN 0.80 KP 0.90 ! LA 0.75 NL 0.93 PT 0.91 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983563 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 LA 1.23 MK 1.00 ! NL 0.95 OV 1.06 PT 1.14 SC 0.94 ! ! Amplitude normalization factor in sub-array 2: 1.064 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.68 HN 0.96 KP 1.04 ! LA 0.92 NL 0.93 PT 0.94 SC 1.11 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.923017 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.18 LA 0.97 MK 0.94 ! NL 1.40 OV 1.10 PT 1.14 SC 0.81 ! ! Amplitude normalization factor in sub-array 2: 1.03679 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.79 HN 0.89 KP 1.15 ! LA 0.92 NL 1.05 PT 0.98 SC 0.94 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.899083 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.24 LA 1.21 MK 1.04 ! NL 0.91 OV 1.21 PT 1.43 SC 0.85 ! ! Amplitude normalization factor in sub-array 2: 0.992521 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.82 HN 1.06 KP 1.08 ! LA 1.01 NL 0.89 PT 1.09 SC 1.17 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.853069 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.20 LA 1.03 MK 1.08 ! NL 1.33 OV 1.33 PT 1.26 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 0.984518 ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.07 HN 1.16 KP 1.20 ! LA 0.74 NL 0.93 PT 1.10 SC 1.06 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.865828 ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.54 LA 0.94 MK 0.94 ! NL 1.33 OV 1.15 PT 1.07 SC 1.09 ! ! Amplitude normalization factor in sub-array 2: 0.970952 ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.91 HN 0.93 KP 1.29 ! LA 0.92 NL 0.90 PT 1.08 SC 1.20 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.898317 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.16 LA 1.13 MK 1.01 ! NL 1.41 OV 0.92 PT 1.32 SC 0.93 ! ! Amplitude normalization factor in sub-array 2: 1.00647 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.06 HN 1.00 KP 1.01 ! LA 0.87 NL 1.09 PT 0.94 SC 1.06 ! ! ! Fit before self-cal, rms=0.024788Jy sigma=0.656079 ! Fit after self-cal, rms=0.024916Jy sigma=0.654345 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024916Jy sigma=0.654345 ! Fit after self-cal, rms=0.024917Jy sigma=0.654312 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.736 mas, bmaj=3.799 mas, bpa=1.621 degrees ! Estimated noise=0.0899696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222202 Jy ! Component: 100 - total flux cleaned = -0.000178107 Jy ! Component: 150 - total flux cleaned = -0.000154961 Jy ! Component: 200 - total flux cleaned = -0.000144838 Jy ! Total flux subtracted in 200 components = -0.000144838 Jy ! Clean residual min=-0.000524 max=0.000482 Jy/beam ! Clean residual mean=-0.000002 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.00876974 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.00876974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024921Jy sigma=0.654161 ! Fit after self-cal, rms=0.024920Jy sigma=0.654144 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024920Jy sigma=0.654144 ! Fit after self-cal, rms=0.024867Jy sigma=0.652035 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-70.5, -15.9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421473 Jy ! Component: 100 - total flux cleaned = 0.000539788 Jy ! Component: 150 - total flux cleaned = 0.000613873 Jy ! Component: 200 - total flux cleaned = 0.000667739 Jy ! Total flux subtracted in 200 components = 0.000667739 Jy ! Clean residual min=-0.000472 max=0.000382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000096 Jy/beam ! Combined flux in latest and established models = 0.00943748 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 61 components and 0.00943748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024857Jy sigma=0.651732 ! Fit after self-cal, rms=0.024852Jy sigma=0.651519 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.736 x 3.799 at 1.621 degrees (North through East) ! Clean map min=-0.00044772 max=0.0089239 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.359 mas, bmaj=3.169 mas, bpa=0.9524 degrees ! Estimated noise=0.206429 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805235 Jy ! Component: 100 - total flux cleaned = 0.00930845 Jy ! Component: 150 - total flux cleaned = 0.00959963 Jy ! Component: 200 - total flux cleaned = 0.00964457 Jy ! Total flux subtracted in 200 components = 0.00964457 Jy ! Clean residual min=-0.000712 max=0.000672 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.00964457 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.00964457 Jy ! Inverting map and beam ! Estimated beam: bmin=1.736 mas, bmaj=3.799 mas, bpa=1.621 degrees ! Estimated noise=0.0899696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.10651e-05 Jy ! Component: 100 - total flux cleaned = -3.28485e-05 Jy ! Component: 150 - total flux cleaned = -3.98767e-05 Jy ! Component: 200 - total flux cleaned = -3.39004e-05 Jy ! Total flux subtracted in 200 components = -3.39004e-05 Jy ! Clean residual min=-0.000477 max=0.000380 Jy/beam ! Clean residual mean=-0.000002 rms=0.000095 Jy/beam ! Combined flux in latest and established models = 0.00961067 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.00961067 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.57305e-08 Jy ! Component: 100 - total flux cleaned = 1.0041e-05 Jy ! Component: 150 - total flux cleaned = 1.94101e-05 Jy ! Component: 200 - total flux cleaned = 2.79935e-05 Jy ! Total flux subtracted in 200 components = 2.79935e-05 Jy ! Clean residual min=-0.000467 max=0.000374 Jy/beam ! Clean residual mean=-0.000002 rms=0.000094 Jy/beam ! Combined flux in latest and established models = 0.00963866 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.00963866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024848Jy sigma=0.651481 ! Fit after self-cal, rms=0.024848Jy sigma=0.651465 wmodel J0240+0731_C_map.mod ! Writing 64 model components to file: J0240+0731_C_map.mod wobs J0240+0731_C_uvs.fits ! Writing UV FITS file: J0240+0731_C_uvs.fits wwins J0240+0731_C_map.win ! wwins: Wrote 2 windows to J0240+0731_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210326 Jy ! Component: 100 - total flux cleaned = -0.000296213 Jy ! Component: 150 - total flux cleaned = -0.000347771 Jy ! Component: 200 - total flux cleaned = -0.000353785 Jy ! Component: 250 - total flux cleaned = -0.00035363 Jy ! Component: 300 - total flux cleaned = -0.000359128 Jy ! Component: 350 - total flux cleaned = -0.000359169 Jy ! Component: 400 - total flux cleaned = -0.000344157 Jy ! Component: 450 - total flux cleaned = -0.000319812 Jy ! Component: 500 - total flux cleaned = -0.000300802 Jy ! Component: 550 - total flux cleaned = -0.000277577 Jy ! Component: 600 - total flux cleaned = -0.000254982 Jy ! Component: 650 - total flux cleaned = -0.000241671 Jy ! Component: 700 - total flux cleaned = -0.000224286 Jy ! Component: 750 - total flux cleaned = -0.000215804 Jy ! Component: 800 - total flux cleaned = -0.000199202 Jy ! Component: 850 - total flux cleaned = -0.000178867 Jy ! Component: 900 - total flux cleaned = -0.000166938 Jy ! Component: 950 - total flux cleaned = -0.000143535 Jy ! Component: 1000 - total flux cleaned = -0.000135848 Jy ! Component: 1050 - total flux cleaned = -0.000113201 Jy ! Component: 1100 - total flux cleaned = -9.46951e-05 Jy ! Component: 1150 - total flux cleaned = -7.64477e-05 Jy ! Component: 1200 - total flux cleaned = -4.41507e-05 Jy ! Component: 1250 - total flux cleaned = -1.94564e-05 Jy ! Component: 1300 - total flux cleaned = 4.96209e-06 Jy ! Component: 1350 - total flux cleaned = 2.55256e-05 Jy ! Component: 1400 - total flux cleaned = 4.58104e-05 Jy ! Component: 1450 - total flux cleaned = 6.58013e-05 Jy ! Component: 1500 - total flux cleaned = 8.55323e-05 Jy ! Component: 1550 - total flux cleaned = 0.000101741 Jy ! Component: 1600 - total flux cleaned = 0.000124134 Jy ! Component: 1650 - total flux cleaned = 0.000149332 Jy ! Component: 1700 - total flux cleaned = 0.000161761 Jy ! Component: 1750 - total flux cleaned = 0.000186351 Jy ! Component: 1800 - total flux cleaned = 0.000204519 Jy ! Component: 1850 - total flux cleaned = 0.00021654 Jy ! Component: 1900 - total flux cleaned = 0.000237282 Jy ! Component: 1950 - total flux cleaned = 0.000254852 Jy ! Component: 2000 - total flux cleaned = 0.000269329 Jy ! Component: 2050 - total flux cleaned = 0.000283699 Jy ! Component: 2100 - total flux cleaned = 0.000309188 Jy ! Component: 2150 - total flux cleaned = 0.000328759 Jy ! Component: 2200 - total flux cleaned = 0.000337073 Jy ! Component: 2250 - total flux cleaned = 0.000356312 Jy ! Component: 2300 - total flux cleaned = 0.000369901 Jy ! Component: 2350 - total flux cleaned = 0.000380693 Jy ! Component: 2400 - total flux cleaned = 0.000396701 Jy ! Component: 2450 - total flux cleaned = 0.000417828 Jy ! Component: 2500 - total flux cleaned = 0.000436107 Jy ! Component: 2550 - total flux cleaned = 0.000441272 Jy ! Component: 2600 - total flux cleaned = 0.000464349 Jy ! Component: 2650 - total flux cleaned = 0.000474508 Jy ! Component: 2700 - total flux cleaned = 0.000492178 Jy ! Component: 2750 - total flux cleaned = 0.000494695 Jy ! Component: 2800 - total flux cleaned = 0.000519512 Jy ! Component: 2850 - total flux cleaned = 0.000539156 Jy ! Component: 2900 - total flux cleaned = 0.000551312 Jy ! Component: 2950 - total flux cleaned = 0.000565813 Jy ! Component: 3000 - total flux cleaned = 0.000568221 Jy ! Component: 3050 - total flux cleaned = 0.000584896 Jy ! Component: 3100 - total flux cleaned = 0.000601429 Jy ! Component: 3150 - total flux cleaned = 0.000622528 Jy ! Component: 3200 - total flux cleaned = 0.000631811 Jy ! Component: 3250 - total flux cleaned = 0.000643376 Jy ! Component: 3300 - total flux cleaned = 0.000663986 Jy ! Component: 3350 - total flux cleaned = 0.000677592 Jy ! Component: 3400 - total flux cleaned = 0.00069114 Jy ! Component: 3450 - total flux cleaned = 0.000697875 Jy ! Component: 3500 - total flux cleaned = 0.00070679 Jy ! Component: 3550 - total flux cleaned = 0.000724487 Jy ! Component: 3600 - total flux cleaned = 0.000737648 Jy ! Component: 3650 - total flux cleaned = 0.000748558 Jy ! Component: 3700 - total flux cleaned = 0.000748569 Jy ! Component: 3750 - total flux cleaned = 0.000767953 Jy ! Component: 3800 - total flux cleaned = 0.000780778 Jy ! Component: 3850 - total flux cleaned = 0.000797759 Jy ! Component: 3900 - total flux cleaned = 0.000804074 Jy ! Component: 3950 - total flux cleaned = 0.000816662 Jy ! Component: 4000 - total flux cleaned = 0.000827075 Jy ! Component: 4050 - total flux cleaned = 0.000835358 Jy ! Total flux subtracted in 4096 components = 0.000857986 Jy ! Clean residual min=-0.000109 max=0.000136 Jy/beam ! Clean residual mean=-0.000000 rms=0.000037 Jy/beam ! Combined flux in latest and established models = 0.0104966 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 377 components and 0.0104966 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0240+0731_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.736 x 3.799 at 1.621 degrees (North through East) ! Clean map min=-0.00024458 max=0.0090022 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0240+0731_C_a_map.fits wmodel /vlbi/vcs9/uvm//J0240+0731_C_a_map.mod ! Writing 377 model components to file: /vlbi/vcs9/uvm//J0240+0731_C_a_map.mod wobs /vlbi/vcs9/uvm//J0240+0731_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0240+0731_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J0240+0731_C_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0240+0731_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00900216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 3.61991e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20635 1.20635 2.41269 4.82539 9.65078 19.3016 38.6031 77.2062 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.009 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 248.684 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0240+0731_C_a_dfm.log closed on Tue Dec 26 21:16:15 2017