! Started logfile: /vlbi/vcs9/uvm//J0121-3915_C_a_dfm.log on Tue Dec 26 21:02:21 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0121-3915_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0121-3915_C_a_uvm.fits
! AN table 1: 94 integrations on 21 of 21 possible baselines.
! AN table 2: 93 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.842975 visibilities/baseline/integration-bin.
! Found source: J0121-3915
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 19584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0121-3915_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0419615 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.001370Jy  sigma=19.455654
! Fit after  self-cal, rms=0.979483Jy  sigma=19.042586
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=9.546 mas, bpa=18.68 degrees
! Estimated noise=0.61142 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187175 Jy
! Component: 100  -  total flux cleaned = 0.0199188 Jy
! Total flux subtracted in 100 components = 0.0199188 Jy
! Clean residual min=-0.001934 max=0.001929 Jy/beam
! Clean residual mean=-0.000009 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.0199188 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0199188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036223Jy  sigma=0.630340
! Fit after  self-cal, rms=0.036219Jy  sigma=0.630194
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.945 mas, bmaj=11.98 mas, bpa=16.91 degrees
! Estimated noise=0.261345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000371304 Jy
! Component: 100  -  total flux cleaned = -0.000447271 Jy
! Component: 150  -  total flux cleaned = -0.000530306 Jy
! Component: 200  -  total flux cleaned = -0.000598938 Jy
! Total flux subtracted in 200 components = -0.000598938 Jy
! Clean residual min=-0.001349 max=0.001217 Jy/beam
! Clean residual mean=-0.000009 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0193198 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.0193198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036183Jy  sigma=0.629656
! Fit after  self-cal, rms=0.036181Jy  sigma=0.629646
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02827
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.74     KP        1.26     LA        0.97     NL        0.81     
!   OV        0.97     PT        1.03     SC        1.03     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.07815
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.81     KP        0.96     OV        0.93     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.02202
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.78     KP        1.20     LA        1.07     NL        0.86     
!   OV        0.96     PT        1.05     SC        0.92     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.0486
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.73     KP        1.05     OV        0.93     PT        1.03     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.996027
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.25     LA        0.95     NL        0.85     
!   OV        0.97     PT        1.10     SC        0.92     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02076
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.86     KP        1.26     OV        0.95     PT        0.85     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.969616
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.82     KP        1.24     LA        0.93     NL        0.98     
!   OV        0.98     PT        1.25     SC        1.01     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.997287
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.81     KP        1.24     OV        1.06     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 0.947539
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.13     LA        1.06     NL        0.89     
!   OV        1.15     PT        0.96     SC        1.21     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.990193
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     KP        0.92     OV        0.98     PT        1.12     
!   SC        1.08     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 0.918828
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.24     KP        1.32     LA        1.04     NL        0.97     
!   OV        0.99     PT        1.07     SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.985548
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.91     KP        1.13     OV        1.07     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 0.950398
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.14     KP        1.24     LA        0.92     NL        0.91     
!   OV        1.06     PT        1.07     SC        1.01     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.972159
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.09     KP        1.04     OV        1.15     PT        0.88     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.941711
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     KP        1.33     LA        1.01     NL        0.90     
!   OV        1.06     PT        0.97     SC        1.06     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00538
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.89     KP        1.05     OV        1.00     PT        1.03     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.036181Jy  sigma=0.629646
! Fit after  self-cal, rms=0.035458Jy  sigma=0.626683
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035458Jy  sigma=0.626683
! Fit after  self-cal, rms=0.035459Jy  sigma=0.626674
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.975 mas, bmaj=11.68 mas, bpa=16.67 degrees
! Estimated noise=0.249574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00050305 Jy
! Component: 100  -  total flux cleaned = -0.000506422 Jy
! Component: 150  -  total flux cleaned = -0.000474864 Jy
! Component: 200  -  total flux cleaned = -0.000467216 Jy
! Total flux subtracted in 200 components = -0.000467216 Jy
! Clean residual min=-0.000782 max=0.000807 Jy/beam
! Clean residual mean=-0.000008 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0188526 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.0188526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035449Jy  sigma=0.626398
! Fit after  self-cal, rms=0.035449Jy  sigma=0.626393
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035449Jy  sigma=0.626393
! Fit after  self-cal, rms=0.035414Jy  sigma=0.625419
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 7.58959e-05 Jy
! Component: 100  -  total flux cleaned = 8.05641e-05 Jy
! Component: 150  -  total flux cleaned = 8.43002e-05 Jy
! Component: 200  -  total flux cleaned = 8.08583e-05 Jy
! Total flux subtracted in 200 components = 8.08583e-05 Jy
! Clean residual min=-0.000758 max=0.000766 Jy/beam
! Clean residual mean=-0.000008 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0189335 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 51 components and 0.0189335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035413Jy  sigma=0.625400
! Fit after  self-cal, rms=0.035415Jy  sigma=0.625331
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.975 x 11.68 at 16.67 degrees (North through East)
! Clean map  min=-0.00071867  max=0.020724 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.394 mas, bmaj=9.466 mas, bpa=18.64 degrees
! Estimated noise=0.592277 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182506 Jy
! Component: 100  -  total flux cleaned = 0.0197577 Jy
! Component: 150  -  total flux cleaned = 0.0196629 Jy
! Component: 200  -  total flux cleaned = 0.0195888 Jy
! Total flux subtracted in 200 components = 0.0195888 Jy
! Clean residual min=-0.001355 max=0.001624 Jy/beam
! Clean residual mean=-0.000006 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0195888 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0195888 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.975 mas, bmaj=11.68 mas, bpa=16.67 degrees
! Estimated noise=0.249574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000365988 Jy
! Component: 100  -  total flux cleaned = -0.000403471 Jy
! Component: 150  -  total flux cleaned = -0.000438037 Jy
! Component: 200  -  total flux cleaned = -0.000463349 Jy
! Total flux subtracted in 200 components = -0.000463349 Jy
! Clean residual min=-0.000757 max=0.000791 Jy/beam
! Clean residual mean=-0.000008 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0191255 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.0191255 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -2.49976e-05 Jy
! Component: 100  -  total flux cleaned = -4.31509e-05 Jy
! Component: 150  -  total flux cleaned = -6.01252e-05 Jy
! Component: 200  -  total flux cleaned = -7.61333e-05 Jy
! Total flux subtracted in 200 components = -7.61333e-05 Jy
! Clean residual min=-0.000760 max=0.000780 Jy/beam
! Clean residual mean=-0.000008 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0190493 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.0190493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035414Jy  sigma=0.625327
! Fit after  self-cal, rms=0.035416Jy  sigma=0.625327
wmodel J0121-3915_C_map.mod
! Writing 50 model components to file: J0121-3915_C_map.mod
wobs   J0121-3915_C_uvs.fits
! Writing UV FITS file: J0121-3915_C_uvs.fits
wwins  J0121-3915_C_map.win
! wwins: Wrote 1 windows to J0121-3915_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156627 Jy
! Component: 100  -  total flux cleaned = 0.000195149 Jy
! Component: 150  -  total flux cleaned = 0.000205691 Jy
! Component: 200  -  total flux cleaned = 0.000246639 Jy
! Component: 250  -  total flux cleaned = 0.000275369 Jy
! Component: 300  -  total flux cleaned = 0.000302629 Jy
! Component: 350  -  total flux cleaned = 0.000285429 Jy
! Component: 400  -  total flux cleaned = 0.000228346 Jy
! Component: 450  -  total flux cleaned = 0.000228494 Jy
! Component: 500  -  total flux cleaned = 0.000235917 Jy
! Component: 550  -  total flux cleaned = 0.000271993 Jy
! Component: 600  -  total flux cleaned = 0.000313813 Jy
! Component: 650  -  total flux cleaned = 0.000347755 Jy
! Component: 700  -  total flux cleaned = 0.000380751 Jy
! Component: 750  -  total flux cleaned = 0.000406456 Jy
! Component: 800  -  total flux cleaned = 0.000437837 Jy
! Component: 850  -  total flux cleaned = 0.00046227 Jy
! Component: 900  -  total flux cleaned = 0.000462428 Jy
! Component: 950  -  total flux cleaned = 0.000480085 Jy
! Component: 1000  -  total flux cleaned = 0.000497325 Jy
! Component: 1050  -  total flux cleaned = 0.000508537 Jy
! Component: 1100  -  total flux cleaned = 0.000530558 Jy
! Component: 1150  -  total flux cleaned = 0.000552195 Jy
! Component: 1200  -  total flux cleaned = 0.00055219 Jy
! Component: 1250  -  total flux cleaned = 0.000572907 Jy
! Component: 1300  -  total flux cleaned = 0.000588167 Jy
! Component: 1350  -  total flux cleaned = 0.000598221 Jy
! Component: 1400  -  total flux cleaned = 0.000618081 Jy
! Component: 1450  -  total flux cleaned = 0.000637564 Jy
! Component: 1500  -  total flux cleaned = 0.00064703 Jy
! Component: 1550  -  total flux cleaned = 0.000647019 Jy
! Component: 1600  -  total flux cleaned = 0.000656292 Jy
! Component: 1650  -  total flux cleaned = 0.000660781 Jy
! Component: 1700  -  total flux cleaned = 0.000669789 Jy
! Component: 1750  -  total flux cleaned = 0.000669853 Jy
! Component: 1800  -  total flux cleaned = 0.000678594 Jy
! Component: 1850  -  total flux cleaned = 0.000674187 Jy
! Component: 1900  -  total flux cleaned = 0.000674171 Jy
! Component: 1950  -  total flux cleaned = 0.000678435 Jy
! Component: 2000  -  total flux cleaned = 0.000670029 Jy
! Component: 2050  -  total flux cleaned = 0.00067837 Jy
! Component: 2100  -  total flux cleaned = 0.000682537 Jy
! Component: 2150  -  total flux cleaned = 0.000706898 Jy
! Component: 2200  -  total flux cleaned = 0.000726899 Jy
! Component: 2250  -  total flux cleaned = 0.000738776 Jy
! Component: 2300  -  total flux cleaned = 0.000746569 Jy
! Component: 2350  -  total flux cleaned = 0.000754329 Jy
! Component: 2400  -  total flux cleaned = 0.000773681 Jy
! Component: 2450  -  total flux cleaned = 0.000788927 Jy
! Component: 2500  -  total flux cleaned = 0.000807825 Jy
! Component: 2550  -  total flux cleaned = 0.000819049 Jy
! Component: 2600  -  total flux cleaned = 0.000841323 Jy
! Component: 2650  -  total flux cleaned = 0.00085965 Jy
! Component: 2700  -  total flux cleaned = 0.000870608 Jy
! Component: 2750  -  total flux cleaned = 0.000885027 Jy
! Component: 2800  -  total flux cleaned = 0.000902927 Jy
! Component: 2850  -  total flux cleaned = 0.00092418 Jy
! Component: 2900  -  total flux cleaned = 0.000924265 Jy
! Component: 2950  -  total flux cleaned = 0.000962582 Jy
! Component: 3000  -  total flux cleaned = 0.000966043 Jy
! Component: 3050  -  total flux cleaned = 0.000996876 Jy
! Component: 3100  -  total flux cleaned = 0.00100367 Jy
! Component: 3150  -  total flux cleaned = 0.00103402 Jy
! Component: 3200  -  total flux cleaned = 0.00105403 Jy
! Component: 3250  -  total flux cleaned = 0.00107724 Jy
! Component: 3300  -  total flux cleaned = 0.00109043 Jy
! Component: 3350  -  total flux cleaned = 0.00111004 Jy
! Component: 3400  -  total flux cleaned = 0.00112949 Jy
! Component: 3450  -  total flux cleaned = 0.00115203 Jy
! Component: 3500  -  total flux cleaned = 0.00116803 Jy
! Component: 3550  -  total flux cleaned = 0.00119662 Jy
! Component: 3600  -  total flux cleaned = 0.00121552 Jy
! Component: 3650  -  total flux cleaned = 0.00123431 Jy
! Component: 3700  -  total flux cleaned = 0.00124361 Jy
! Component: 3750  -  total flux cleaned = 0.00127146 Jy
! Component: 3800  -  total flux cleaned = 0.00129608 Jy
! Component: 3850  -  total flux cleaned = 0.00133275 Jy
! Component: 3900  -  total flux cleaned = 0.00134185 Jy
! Component: 3950  -  total flux cleaned = 0.00136902 Jy
! Component: 4000  -  total flux cleaned = 0.00139905 Jy
! Component: 4050  -  total flux cleaned = 0.00141697 Jy
! Total flux subtracted in 4096 components = 0.00144961 Jy
! Clean residual min=-0.000148 max=0.000156 Jy/beam
! Clean residual mean=-0.000001 rms=0.000056 Jy/beam
! Combined flux in latest and established models = 0.020499 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 323 components and 0.020499 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0121-3915_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.975 x 11.68 at 16.67 degrees (North through East)
! Clean map  min=-0.00053333  max=0.020434 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0121-3915_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0121-3915_C_a_map.mod
! Writing 323 model components to file: /vlbi/vcs9/uvm//J0121-3915_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0121-3915_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0121-3915_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0121-3915_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0121-3915_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0204337 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.50559e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.808311 0.808311 1.61662 3.23324 6.46649 12.933 25.8659 51.7319
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  371.144 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0121-3915_C_a_dfm.log closed on Tue Dec 26 21:02:25 2017