! Started logfile: /vlbi/vcs9/uvm//J0116-1136_C_b_dfm.log on Tue Dec 26 21:00:51 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0116-1136_C_b_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0116-1136_C_b_uvm.fits
! AN table 1: 91 integrations on 36 of 36 possible baselines.
! AN table 2: 23 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.810056 visibilities/baseline/integration-bin.
! Found source: J0116-1136
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 24360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0116-1136_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.509009 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 116 telescope corrections were flagged in sub-array 1.
!  A total of 33 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.128280Jy  sigma=27.698025
! Fit after  self-cal, rms=0.521106Jy  sigma=12.750483
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.858 mas, bmaj=4.632 mas, bpa=9.671 degrees
! Estimated noise=0.299972 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.397359 Jy
! Component: 100  -  total flux cleaned = 0.476071 Jy
! Total flux subtracted in 100 components = 0.476071 Jy
! Clean residual min=-0.017558 max=0.046895 Jy/beam
! Clean residual mean=0.000055 rms=0.004189 Jy/beam
! Combined flux in latest and established models = 0.476071 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.476071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.115914Jy  sigma=2.792893
! Fit after  self-cal, rms=0.115634Jy  sigma=2.787735
! Inverting map 
! Added new window around map position (-3.9, 7.2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0545518 Jy
! Component: 100  -  total flux cleaned = 0.0855026 Jy
! Total flux subtracted in 100 components = 0.0855026 Jy
! Clean residual min=-0.013018 max=0.019650 Jy/beam
! Clean residual mean=0.000040 rms=0.002488 Jy/beam
! Combined flux in latest and established models = 0.561573 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.561573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078844Jy  sigma=1.838007
! Fit after  self-cal, rms=0.077502Jy  sigma=1.805929
! Inverting map 
! Added new window around map position (2.4, -5.4).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228787 Jy
! Component: 100  -  total flux cleaned = 0.0372279 Jy
! Total flux subtracted in 100 components = 0.0372279 Jy
! Clean residual min=-0.008495 max=0.010694 Jy/beam
! Clean residual mean=0.000033 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 0.598801 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 44 components and 0.598801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067197Jy  sigma=1.536227
! Fit after  self-cal, rms=0.067118Jy  sigma=1.533784
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.234 mas, bmaj=5.358 mas, bpa=8.097 degrees
! Estimated noise=0.183873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225583 Jy
! Component: 100  -  total flux cleaned = 0.034917 Jy
! Component: 150  -  total flux cleaned = 0.0431534 Jy
! Component: 200  -  total flux cleaned = 0.0490222 Jy
! Total flux subtracted in 200 components = 0.0490222 Jy
! Clean residual min=-0.006750 max=0.013735 Jy/beam
! Clean residual mean=-0.000010 rms=0.002057 Jy/beam
! Combined flux in latest and established models = 0.647824 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 87 components and 0.647824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060747Jy  sigma=1.371019
! Fit after  self-cal, rms=0.060469Jy  sigma=1.362852
! Inverting map 
! Added new window around map position (-9, 10.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163872 Jy
! Component: 100  -  total flux cleaned = 0.0229444 Jy
! Component: 150  -  total flux cleaned = 0.0258718 Jy
! Component: 200  -  total flux cleaned = 0.0277501 Jy
! Total flux subtracted in 200 components = 0.0277501 Jy
! Clean residual min=-0.005003 max=0.005392 Jy/beam
! Clean residual mean=-0.000001 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.675574 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 131 components and 0.675574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057184Jy  sigma=1.275649
! Fit after  self-cal, rms=0.056950Jy  sigma=1.269705
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.03028
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.01     KP        0.93     
!   LA        0.96     NL        0.94     OV        0.95     PT        0.94     
!   SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00293
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     HN        1.00     KP        0.98     LA        1.00     
!   OV        1.02     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01473
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.03     KP        0.95     
!   LA        0.98     NL        0.97     OV        0.97     PT        0.95     
!   SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.0038
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     HN        1.03     KP        1.00     LA        1.00     
!   OV        1.00     PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.98264
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.00     KP        1.02     
!   LA        1.02     NL        1.00     OV        1.02     PT        1.00     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.999754
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        0.99     KP        0.99     LA        1.00     
!   OV        1.03     PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.984363
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.02     NL        1.02     OV        1.03     PT        1.01     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.997616
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     HN        1.04     KP        1.00     LA        1.00     
!   OV        1.02     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.991073
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.00     KP        1.01     
!   LA        1.02     NL        1.01     OV        1.02     PT        1.00     
!   SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00834
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     HN        0.98     KP        0.99     LA        0.99     
!   OV        1.01     PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.997086
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.01     
!   LA        1.02     NL        1.00     OV        1.02     PT        1.00     
!   SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01425
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        0.98     KP        0.98     LA        0.99     
!   OV        1.00     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.99959
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.01     
!   LA        1.02     NL        1.00     OV        1.02     PT        1.00     
!   SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01147
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        1.01     KP        0.97     LA        0.99     
!   OV        1.00     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00072
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.01     NL        0.99     OV        1.02     PT        1.00     
!   SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01538
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     HN        0.99     KP        0.98     LA        0.99     
!   OV        1.00     PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.056950Jy  sigma=1.269705
! Fit after  self-cal, rms=0.053582Jy  sigma=1.215816
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053582Jy  sigma=1.215816
! Fit after  self-cal, rms=0.053579Jy  sigma=1.215662
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=5.397 mas, bpa=7.752 degrees
! Estimated noise=0.184594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133104 Jy
! Component: 100  -  total flux cleaned = -0.000544498 Jy
! Component: 150  -  total flux cleaned = 8.53134e-05 Jy
! Component: 200  -  total flux cleaned = 0.000589006 Jy
! Total flux subtracted in 200 components = 0.000589006 Jy
! Clean residual min=-0.003898 max=0.004199 Jy/beam
! Clean residual mean=0.000006 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.676163 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 160 components and 0.676163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053245Jy  sigma=1.206774
! Fit after  self-cal, rms=0.053206Jy  sigma=1.205845
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053206Jy  sigma=1.205845
! Fit after  self-cal, rms=0.053150Jy  sigma=1.204821
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000359968 Jy
! Component: 100  -  total flux cleaned = 0.000636799 Jy
! Component: 150  -  total flux cleaned = 0.000751535 Jy
! Component: 200  -  total flux cleaned = 0.000854217 Jy
! Total flux subtracted in 200 components = 0.000854217 Jy
! Clean residual min=-0.003958 max=0.003900 Jy/beam
! Clean residual mean=0.000006 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.677017 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 184 components and 0.677017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053035Jy  sigma=1.201918
! Fit after  self-cal, rms=0.052993Jy  sigma=1.201150
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.232 x 5.397 at 7.752 degrees (North through East)
! Clean map  min=-0.0037401  max=0.46518 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052993Jy  sigma=1.201150
! Fit after  self-cal, rms=0.033566Jy  sigma=0.727434
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033566Jy  sigma=0.727434
! Fit after  self-cal, rms=0.033546Jy  sigma=0.727119
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=5.406 mas, bpa=7.775 degrees
! Estimated noise=0.18414 mJy/beam.
! Added new window around map position (10.8, -30).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259858 Jy
! Component: 100  -  total flux cleaned = 0.00300527 Jy
! Component: 150  -  total flux cleaned = 0.00319695 Jy
! Component: 200  -  total flux cleaned = 0.00314391 Jy
! Total flux subtracted in 200 components = 0.00314391 Jy
! Clean residual min=-0.001946 max=0.002642 Jy/beam
! Clean residual mean=-0.000008 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.680161 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 211 components and 0.680161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033250Jy  sigma=0.718675
! Fit after  self-cal, rms=0.033207Jy  sigma=0.717998
! Inverting map 
! Added new window around map position (6.3, -12).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155847 Jy
! Component: 100  -  total flux cleaned = 0.00191204 Jy
! Component: 150  -  total flux cleaned = 0.00219909 Jy
! Component: 200  -  total flux cleaned = 0.00245351 Jy
! Total flux subtracted in 200 components = 0.00245351 Jy
! Clean residual min=-0.001605 max=0.001744 Jy/beam
! Clean residual mean=-0.000005 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.682614 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 243 components and 0.682614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032923Jy  sigma=0.710932
! Fit after  self-cal, rms=0.032903Jy  sigma=0.710542
! Inverting map 
! Added new window around map position (-27.9, 28.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211394 Jy
! Component: 100  -  total flux cleaned = 0.00238859 Jy
! Component: 150  -  total flux cleaned = 0.00252267 Jy
! Component: 200  -  total flux cleaned = 0.00256073 Jy
! Total flux subtracted in 200 components = 0.00256073 Jy
! Clean residual min=-0.001448 max=0.001579 Jy/beam
! Clean residual mean=-0.000003 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.685175 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 54 model components to the UV plane model.
! The established model now contains 284 components and 0.685175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032769Jy  sigma=0.706798
! Fit after  self-cal, rms=0.032755Jy  sigma=0.706471
! Inverting map 
! Added new window around map position (21, 48.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132772 Jy
! Component: 100  -  total flux cleaned = 0.00162495 Jy
! Component: 150  -  total flux cleaned = 0.00180978 Jy
! Component: 200  -  total flux cleaned = 0.00184368 Jy
! Total flux subtracted in 200 components = 0.00184368 Jy
! Clean residual min=-0.001246 max=0.001278 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.687019 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 316 components and 0.687019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032667Jy  sigma=0.704164
! Fit after  self-cal, rms=0.032656Jy  sigma=0.704005
! Inverting map 
! Added new window around map position (-20.1, 9.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920043 Jy
! Component: 100  -  total flux cleaned = 0.00106175 Jy
! Component: 150  -  total flux cleaned = 0.00122167 Jy
! Component: 200  -  total flux cleaned = 0.0013397 Jy
! Total flux subtracted in 200 components = 0.0013397 Jy
! Clean residual min=-0.001125 max=0.001047 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.688359 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 349 components and 0.688359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032583Jy  sigma=0.702282
! Fit after  self-cal, rms=0.032573Jy  sigma=0.702166
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.857 mas, bmaj=4.64 mas, bpa=9.776 degrees
! Estimated noise=0.301012 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.397811 Jy
! Component: 100  -  total flux cleaned = 0.485965 Jy
! Component: 150  -  total flux cleaned = 0.5334 Jy
! Component: 200  -  total flux cleaned = 0.563548 Jy
! Total flux subtracted in 200 components = 0.563548 Jy
! Clean residual min=-0.009088 max=0.012113 Jy/beam
! Clean residual mean=0.000007 rms=0.001909 Jy/beam
! Combined flux in latest and established models = 0.563548 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.563548 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=5.406 mas, bpa=7.775 degrees
! Estimated noise=0.18414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.040031 Jy
! Component: 100  -  total flux cleaned = 0.0625278 Jy
! Component: 150  -  total flux cleaned = 0.0767786 Jy
! Component: 200  -  total flux cleaned = 0.0863864 Jy
! Total flux subtracted in 200 components = 0.0863864 Jy
! Clean residual min=-0.003556 max=0.004893 Jy/beam
! Clean residual mean=-0.000010 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 0.649935 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 119 components and 0.649935 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00685598 Jy
! Component: 100  -  total flux cleaned = 0.0121551 Jy
! Component: 150  -  total flux cleaned = 0.0164345 Jy
! Component: 200  -  total flux cleaned = 0.0200111 Jy
! Total flux subtracted in 200 components = 0.0200111 Jy
! Clean residual min=-0.002333 max=0.002753 Jy/beam
! Clean residual mean=-0.000006 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.669946 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 74 model components to the UV plane model.
! The established model now contains 182 components and 0.669946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033531Jy  sigma=0.726227
! Fit after  self-cal, rms=0.033409Jy  sigma=0.723315
wmodel J0116-1136_C_map.mod
! Writing 182 model components to file: J0116-1136_C_map.mod
wobs   J0116-1136_C_uvs.fits
! Writing UV FITS file: J0116-1136_C_uvs.fits
wwins  J0116-1136_C_map.win
! wwins: Wrote 9 windows to J0116-1136_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111477 Jy
! Component: 100  -  total flux cleaned = 0.00172797 Jy
! Component: 150  -  total flux cleaned = 0.00215154 Jy
! Component: 200  -  total flux cleaned = 0.00258068 Jy
! Component: 250  -  total flux cleaned = 0.00289145 Jy
! Component: 300  -  total flux cleaned = 0.00333413 Jy
! Component: 350  -  total flux cleaned = 0.00370103 Jy
! Component: 400  -  total flux cleaned = 0.00391778 Jy
! Component: 450  -  total flux cleaned = 0.00417918 Jy
! Component: 500  -  total flux cleaned = 0.00442977 Jy
! Component: 550  -  total flux cleaned = 0.00467173 Jy
! Component: 600  -  total flux cleaned = 0.00485887 Jy
! Component: 650  -  total flux cleaned = 0.00490451 Jy
! Component: 700  -  total flux cleaned = 0.00492687 Jy
! Component: 750  -  total flux cleaned = 0.00497006 Jy
! Component: 800  -  total flux cleaned = 0.00499088 Jy
! Component: 850  -  total flux cleaned = 0.00496994 Jy
! Component: 900  -  total flux cleaned = 0.00503044 Jy
! Component: 950  -  total flux cleaned = 0.00508883 Jy
! Component: 1000  -  total flux cleaned = 0.00506943 Jy
! Component: 1050  -  total flux cleaned = 0.00512552 Jy
! Component: 1100  -  total flux cleaned = 0.00514383 Jy
! Component: 1150  -  total flux cleaned = 0.00516169 Jy
! Component: 1200  -  total flux cleaned = 0.00519691 Jy
! Component: 1250  -  total flux cleaned = 0.00523142 Jy
! Component: 1300  -  total flux cleaned = 0.00523115 Jy
! Component: 1350  -  total flux cleaned = 0.00523114 Jy
! Component: 1400  -  total flux cleaned = 0.00523103 Jy
! Component: 1450  -  total flux cleaned = 0.00519931 Jy
! Component: 1500  -  total flux cleaned = 0.00524625 Jy
! Component: 1550  -  total flux cleaned = 0.00523093 Jy
! Component: 1600  -  total flux cleaned = 0.00527593 Jy
! Component: 1650  -  total flux cleaned = 0.0052461 Jy
! Component: 1700  -  total flux cleaned = 0.00527477 Jy
! Component: 1750  -  total flux cleaned = 0.00524589 Jy
! Component: 1800  -  total flux cleaned = 0.00525985 Jy
! Component: 1850  -  total flux cleaned = 0.00524597 Jy
! Component: 1900  -  total flux cleaned = 0.00520515 Jy
! Component: 1950  -  total flux cleaned = 0.00521849 Jy
! Component: 2000  -  total flux cleaned = 0.00519169 Jy
! Component: 2050  -  total flux cleaned = 0.00511374 Jy
! Component: 2100  -  total flux cleaned = 0.00507522 Jy
! Component: 2150  -  total flux cleaned = 0.00503743 Jy
! Component: 2200  -  total flux cleaned = 0.0050372 Jy
! Component: 2250  -  total flux cleaned = 0.00498795 Jy
! Component: 2300  -  total flux cleaned = 0.00493942 Jy
! Component: 2350  -  total flux cleaned = 0.00493956 Jy
! Component: 2400  -  total flux cleaned = 0.00495144 Jy
! Component: 2450  -  total flux cleaned = 0.00491669 Jy
! Component: 2500  -  total flux cleaned = 0.00492827 Jy
! Component: 2550  -  total flux cleaned = 0.00492817 Jy
! Component: 2600  -  total flux cleaned = 0.00491695 Jy
! Component: 2650  -  total flux cleaned = 0.0049168 Jy
! Component: 2700  -  total flux cleaned = 0.00492755 Jy
! Component: 2750  -  total flux cleaned = 0.00486284 Jy
! Component: 2800  -  total flux cleaned = 0.00483102 Jy
! Component: 2850  -  total flux cleaned = 0.00487323 Jy
! Component: 2900  -  total flux cleaned = 0.00488353 Jy
! Component: 2950  -  total flux cleaned = 0.00487309 Jy
! Component: 3000  -  total flux cleaned = 0.0048222 Jy
! Component: 3050  -  total flux cleaned = 0.00485241 Jy
! Component: 3100  -  total flux cleaned = 0.0048624 Jy
! Component: 3150  -  total flux cleaned = 0.00488195 Jy
! Component: 3200  -  total flux cleaned = 0.00493058 Jy
! Component: 3250  -  total flux cleaned = 0.0049015 Jy
! Component: 3300  -  total flux cleaned = 0.00495892 Jy
! Component: 3350  -  total flux cleaned = 0.00495897 Jy
! Component: 3400  -  total flux cleaned = 0.00494944 Jy
! Component: 3450  -  total flux cleaned = 0.0049588 Jy
! Component: 3500  -  total flux cleaned = 0.00495879 Jy
! Component: 3550  -  total flux cleaned = 0.00497722 Jy
! Component: 3600  -  total flux cleaned = 0.0049954 Jy
! Component: 3650  -  total flux cleaned = 0.00498649 Jy
! Component: 3700  -  total flux cleaned = 0.00499526 Jy
! Component: 3750  -  total flux cleaned = 0.00500404 Jy
! Component: 3800  -  total flux cleaned = 0.00500401 Jy
! Component: 3850  -  total flux cleaned = 0.0049868 Jy
! Component: 3900  -  total flux cleaned = 0.00499547 Jy
! Component: 3950  -  total flux cleaned = 0.00496165 Jy
! Component: 4000  -  total flux cleaned = 0.00497856 Jy
! Component: 4050  -  total flux cleaned = 0.00497861 Jy
! Total flux subtracted in 4096 components = 0.00500354 Jy
! Clean residual min=-0.000451 max=0.000448 Jy/beam
! Clean residual mean=-0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.674949 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 496 components and 0.674949 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0116-1136_C_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.232 x 5.406 at 7.775 degrees (North through East)
! Clean map  min=-0.0013356  max=0.46983 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0116-1136_C_b_map.fits
wmodel /vlbi/vcs9/uvm//J0116-1136_C_b_map.mod
! Writing 496 model components to file: /vlbi/vcs9/uvm//J0116-1136_C_b_map.mod
wobs   /vlbi/vcs9/uvm//J0116-1136_C_b_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0116-1136_C_b_uvs.fits
wwins  /vlbi/vcs9/uvm//J0116-1136_C_b_map.win
! wwins: Wrote 10 windows to /vlbi/vcs9/uvm//J0116-1136_C_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.469826 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00016128 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.102983 0.102983 0.205966 0.411931 0.823862 1.64772 3.29545 6.5909 13.1818 26.3636 52.7272
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.469 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2913.11 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0116-1136_C_b_dfm.log closed on Tue Dec 26 21:00:56 2017