! Started logfile: /vlbi/vcs9/uvm//J0039+7443_X_a_dfm.log on Tue Dec 26 20:55:09 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0039+7443_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0039+7443_X_a_uvm.fits ! AN table 1: 112 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.768353 visibilities/baseline/integration-bin. ! Found source: J0039+7443 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 24784 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0039+7443_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0445017 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001398Jy sigma=25.456237 ! Fit after self-cal, rms=0.975059Jy sigma=24.763292 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=2.266 mas, bpa=2.17 degrees ! Estimated noise=0.355009 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195066 Jy ! Component: 100 - total flux cleaned = 0.0273041 Jy ! Total flux subtracted in 100 components = 0.0273041 Jy ! Clean residual min=-0.001985 max=0.004018 Jy/beam ! Clean residual mean=0.000009 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0273041 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0273041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034825Jy sigma=0.844194 ! Fit after self-cal, rms=0.034796Jy sigma=0.843368 ! Inverting map ! Added new window around map position (1.4, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00497034 Jy ! Component: 100 - total flux cleaned = 0.00804768 Jy ! Total flux subtracted in 100 components = 0.00804768 Jy ! Clean residual min=-0.001829 max=0.003821 Jy/beam ! Clean residual mean=0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0353517 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.0353517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033843Jy sigma=0.815550 ! Fit after self-cal, rms=0.033811Jy sigma=0.814555 ! Inverting map ! Added new window around map position (-1.6, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037093 Jy ! Component: 100 - total flux cleaned = 0.00594643 Jy ! Total flux subtracted in 100 components = 0.00594643 Jy ! Clean residual min=-0.001526 max=0.001995 Jy/beam ! Clean residual mean=0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0412982 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.0412982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033336Jy sigma=0.801037 ! Fit after self-cal, rms=0.033329Jy sigma=0.800842 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.262 mas, bmaj=2.632 mas, bpa=6.168 degrees ! Estimated noise=0.176869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330687 Jy ! Component: 100 - total flux cleaned = 0.00536811 Jy ! Component: 150 - total flux cleaned = 0.0067925 Jy ! Component: 200 - total flux cleaned = 0.00778813 Jy ! Total flux subtracted in 200 components = 0.00778813 Jy ! Clean residual min=-0.001912 max=0.002613 Jy/beam ! Clean residual mean=-0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0490863 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 64 model components to the UV plane model. ! The established model now contains 126 components and 0.0490863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033079Jy sigma=0.793400 ! Fit after self-cal, rms=0.033070Jy sigma=0.793229 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.944061 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.10 HN 1.49 KP 0.88 ! LA 1.06 NL 0.94 OV 1.02 PT 0.92 ! SC 1.17 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.951664 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.01 KP 0.86 ! LA 1.08 NL 0.98 OV 1.05 PT 0.91 ! SC 1.51 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.937953 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.15 HN 1.26 KP 0.86 ! LA 1.13 NL 0.97 OV 1.05 PT 0.93 ! SC 1.12 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.974707 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 1.09 KP 0.82 ! LA 1.03 NL 1.06 OV 1.02 PT 0.92 ! SC 1.20 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.977609 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.08 HN 1.28 KP 0.91 ! LA 1.13 NL 0.99 OV 0.93 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.961462 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.16 HN 1.26 KP 0.87 ! LA 1.08 NL 0.94 OV 0.89 PT 0.97 ! SC 1.17 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.986769 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.07 KP 0.98 ! LA 1.06 NL 1.06 OV 0.92 PT 0.95 ! SC 1.05 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983331 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.14 HN 1.09 KP 0.89 ! LA 1.04 NL 1.11 OV 0.93 PT 0.92 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.033070Jy sigma=0.793229 ! Fit after self-cal, rms=0.033613Jy sigma=0.789787 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033613Jy sigma=0.789787 ! Fit after self-cal, rms=0.033622Jy sigma=0.789686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.355 mas, bmaj=2.735 mas, bpa=6.37 degrees ! Estimated noise=0.167772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00219025 Jy ! Component: 100 - total flux cleaned = -0.00283181 Jy ! Component: 150 - total flux cleaned = -0.00309247 Jy ! Component: 200 - total flux cleaned = -0.00315276 Jy ! Total flux subtracted in 200 components = -0.00315276 Jy ! Clean residual min=-0.001671 max=0.002021 Jy/beam ! Clean residual mean=-0.000010 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0459336 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.0459336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033544Jy sigma=0.786797 ! Fit after self-cal, rms=0.033541Jy sigma=0.786746 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033541Jy sigma=0.786746 ! Fit after self-cal, rms=0.033483Jy sigma=0.785012 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.36471e-05 Jy ! Component: 100 - total flux cleaned = -1.38278e-05 Jy ! Component: 150 - total flux cleaned = -2.32213e-05 Jy ! Component: 200 - total flux cleaned = -2.3178e-05 Jy ! Total flux subtracted in 200 components = -2.3178e-05 Jy ! Clean residual min=-0.001660 max=0.002019 Jy/beam ! Clean residual mean=-0.000010 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0459104 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 150 components and 0.0459104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033481Jy sigma=0.784871 ! Fit after self-cal, rms=0.033481Jy sigma=0.784555 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.355 x 2.735 at 6.37 degrees (North through East) ! Clean map min=-0.0016553 max=0.023405 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.025 mas, bmaj=2.298 mas, bpa=2.291 degrees ! Estimated noise=0.353456 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190786 Jy ! Component: 100 - total flux cleaned = 0.0268065 Jy ! Component: 150 - total flux cleaned = 0.0313108 Jy ! Component: 200 - total flux cleaned = 0.0343683 Jy ! Total flux subtracted in 200 components = 0.0343683 Jy ! Clean residual min=-0.001533 max=0.001712 Jy/beam ! Clean residual mean=0.000003 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0343683 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0343683 Jy ! Inverting map and beam ! Estimated beam: bmin=1.355 mas, bmaj=2.735 mas, bpa=6.37 degrees ! Estimated noise=0.167772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430749 Jy ! Component: 100 - total flux cleaned = 0.00684637 Jy ! Component: 150 - total flux cleaned = 0.00850974 Jy ! Component: 200 - total flux cleaned = 0.0096202 Jy ! Total flux subtracted in 200 components = 0.0096202 Jy ! Clean residual min=-0.001711 max=0.001966 Jy/beam ! Clean residual mean=-0.000006 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0439885 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 102 components and 0.0439885 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750017 Jy ! Component: 100 - total flux cleaned = 0.00125963 Jy ! Component: 150 - total flux cleaned = 0.00152156 Jy ! Component: 200 - total flux cleaned = 0.00166464 Jy ! Total flux subtracted in 200 components = 0.00166464 Jy ! Clean residual min=-0.001678 max=0.001992 Jy/beam ! Clean residual mean=-0.000009 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0456531 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.0456531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033484Jy sigma=0.784689 ! Fit after self-cal, rms=0.033488Jy sigma=0.784606 wmodel J0039+7443_X_map.mod ! Writing 117 model components to file: J0039+7443_X_map.mod wobs J0039+7443_X_uvs.fits ! Writing UV FITS file: J0039+7443_X_uvs.fits wwins J0039+7443_X_map.win ! wwins: Wrote 3 windows to J0039+7443_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906749 Jy ! Component: 100 - total flux cleaned = 0.00149915 Jy ! Component: 150 - total flux cleaned = 0.00186712 Jy ! Component: 200 - total flux cleaned = 0.00218833 Jy ! Component: 250 - total flux cleaned = 0.0025527 Jy ! Component: 300 - total flux cleaned = 0.00287582 Jy ! Component: 350 - total flux cleaned = 0.0031608 Jy ! Component: 400 - total flux cleaned = 0.00331141 Jy ! Component: 450 - total flux cleaned = 0.00340911 Jy ! Component: 500 - total flux cleaned = 0.0035517 Jy ! Component: 550 - total flux cleaned = 0.00362179 Jy ! Component: 600 - total flux cleaned = 0.00371287 Jy ! Component: 650 - total flux cleaned = 0.00384571 Jy ! Component: 700 - total flux cleaned = 0.00388833 Jy ! Component: 750 - total flux cleaned = 0.00397325 Jy ! Component: 800 - total flux cleaned = 0.00403542 Jy ! Component: 850 - total flux cleaned = 0.00409594 Jy ! Component: 900 - total flux cleaned = 0.00413578 Jy ! Component: 950 - total flux cleaned = 0.00419505 Jy ! Component: 1000 - total flux cleaned = 0.00423402 Jy ! Component: 1050 - total flux cleaned = 0.00432964 Jy ! Component: 1100 - total flux cleaned = 0.00440478 Jy ! Component: 1150 - total flux cleaned = 0.00451526 Jy ! Component: 1200 - total flux cleaned = 0.0045512 Jy ! Component: 1250 - total flux cleaned = 0.00462262 Jy ! Component: 1300 - total flux cleaned = 0.00464001 Jy ! Component: 1350 - total flux cleaned = 0.00469209 Jy ! Component: 1400 - total flux cleaned = 0.00474339 Jy ! Component: 1450 - total flux cleaned = 0.00481059 Jy ! Component: 1500 - total flux cleaned = 0.0048105 Jy ! Component: 1550 - total flux cleaned = 0.00482702 Jy ! Component: 1600 - total flux cleaned = 0.0048432 Jy ! Component: 1650 - total flux cleaned = 0.00487504 Jy ! Component: 1700 - total flux cleaned = 0.00487486 Jy ! Component: 1750 - total flux cleaned = 0.00490596 Jy ! Component: 1800 - total flux cleaned = 0.00487532 Jy ! Component: 1850 - total flux cleaned = 0.00489032 Jy ! Component: 1900 - total flux cleaned = 0.00492024 Jy ! Component: 1950 - total flux cleaned = 0.00487543 Jy ! Component: 2000 - total flux cleaned = 0.00489007 Jy ! Component: 2050 - total flux cleaned = 0.00487543 Jy ! Component: 2100 - total flux cleaned = 0.00496185 Jy ! Component: 2150 - total flux cleaned = 0.00493328 Jy ! Component: 2200 - total flux cleaned = 0.00491925 Jy ! Component: 2250 - total flux cleaned = 0.00491946 Jy ! Component: 2300 - total flux cleaned = 0.0049472 Jy ! Component: 2350 - total flux cleaned = 0.00498831 Jy ! Component: 2400 - total flux cleaned = 0.00494771 Jy ! Component: 2450 - total flux cleaned = 0.00498789 Jy ! Component: 2500 - total flux cleaned = 0.00496127 Jy ! Component: 2550 - total flux cleaned = 0.00501385 Jy ! Component: 2600 - total flux cleaned = 0.00500073 Jy ! Component: 2650 - total flux cleaned = 0.00501352 Jy ! Component: 2700 - total flux cleaned = 0.00498804 Jy ! Component: 2750 - total flux cleaned = 0.00502591 Jy ! Component: 2800 - total flux cleaned = 0.00500083 Jy ! Component: 2850 - total flux cleaned = 0.00500095 Jy ! Component: 2900 - total flux cleaned = 0.0050379 Jy ! Component: 2950 - total flux cleaned = 0.00501347 Jy ! Component: 3000 - total flux cleaned = 0.00503751 Jy ! Component: 3050 - total flux cleaned = 0.00501366 Jy ! Component: 3100 - total flux cleaned = 0.00504912 Jy ! Component: 3150 - total flux cleaned = 0.00503728 Jy ! Component: 3200 - total flux cleaned = 0.00501384 Jy ! Component: 3250 - total flux cleaned = 0.00499067 Jy ! Component: 3300 - total flux cleaned = 0.00505936 Jy ! Component: 3350 - total flux cleaned = 0.0050138 Jy ! Component: 3400 - total flux cleaned = 0.00507018 Jy ! Component: 3450 - total flux cleaned = 0.00507008 Jy ! Component: 3500 - total flux cleaned = 0.0050811 Jy ! Component: 3550 - total flux cleaned = 0.00504804 Jy ! Component: 3600 - total flux cleaned = 0.00508073 Jy ! Component: 3650 - total flux cleaned = 0.00504809 Jy ! Component: 3700 - total flux cleaned = 0.00504799 Jy ! Component: 3750 - total flux cleaned = 0.00504795 Jy ! Component: 3800 - total flux cleaned = 0.0050374 Jy ! Component: 3850 - total flux cleaned = 0.00504791 Jy ! Component: 3900 - total flux cleaned = 0.00507917 Jy ! Component: 3950 - total flux cleaned = 0.00505838 Jy ! Component: 4000 - total flux cleaned = 0.0050994 Jy ! Component: 4050 - total flux cleaned = 0.00509932 Jy ! Total flux subtracted in 4096 components = 0.00513973 Jy ! Clean residual min=-0.000597 max=0.000504 Jy/beam ! Clean residual mean=-0.000005 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.0507929 Jy keep ! Adding 539 model components to the UV plane model. ! The established model now contains 656 components and 0.0507929 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0039+7443_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.355 x 2.735 at 6.37 degrees (North through East) ! Clean map min=-0.0011823 max=0.023645 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0039+7443_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0039+7443_X_a_map.mod ! Writing 656 model components to file: /vlbi/vcs9/uvm//J0039+7443_X_a_map.mod wobs /vlbi/vcs9/uvm//J0039+7443_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0039+7443_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0039+7443_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J0039+7443_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0236451 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022493 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.85383 2.85383 5.70765 11.4153 22.8306 45.6612 91.3224 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.023 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 105.122 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0039+7443_X_a_dfm.log closed on Tue Dec 26 20:55:13 2017