! Started logfile: /vlbi/vcs9/uvm//J0033+2255_C_a_dfm.log on Tue Dec 26 20:54:25 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0033+2255_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0033+2255_C_a_uvm.fits
! AN table 1: 146 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.636682 visibilities/baseline/integration-bin.
! Found source: J0033+2255
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 33464 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0033+2255_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.049174 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 436 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001598Jy  sigma=31.618775
! Fit after  self-cal, rms=0.976701Jy  sigma=30.798324
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.357 mas, bmaj=3.445 mas, bpa=1.928 degrees
! Estimated noise=0.198098 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145855 Jy
! Component: 100  -  total flux cleaned = 0.0225344 Jy
! Total flux subtracted in 100 components = 0.0225344 Jy
! Clean residual min=-0.002355 max=0.004709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0225344 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.0225344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041674Jy  sigma=1.332098
! Fit after  self-cal, rms=0.041649Jy  sigma=1.331187
! Inverting map 
! Added new window around map position (-2.4, -0.3).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665689 Jy
! Component: 100  -  total flux cleaned = 0.011795 Jy
! Total flux subtracted in 100 components = 0.011795 Jy
! Clean residual min=-0.002119 max=0.004375 Jy/beam
! Clean residual mean=-0.000001 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.0343294 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 88 components and 0.0343294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039060Jy  sigma=1.240510
! Fit after  self-cal, rms=0.038994Jy  sigma=1.238152
! Inverting map 
! Added new window around map position (3, -2.4).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548266 Jy
! Component: 100  -  total flux cleaned = 0.00987397 Jy
! Total flux subtracted in 100 components = 0.00987397 Jy
! Clean residual min=-0.001873 max=0.003075 Jy/beam
! Clean residual mean=-0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.0442034 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 126 components and 0.0442034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037187Jy  sigma=1.173551
! Fit after  self-cal, rms=0.037181Jy  sigma=1.173271
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.757 mas, bmaj=3.917 mas, bpa=1.973 degrees
! Estimated noise=0.122731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125144 Jy
! Component: 100  -  total flux cleaned = 0.0214573 Jy
! Component: 150  -  total flux cleaned = 0.0281281 Jy
! Component: 200  -  total flux cleaned = 0.0331797 Jy
! Total flux subtracted in 200 components = 0.0331797 Jy
! Clean residual min=-0.004115 max=0.005981 Jy/beam
! Clean residual mean=-0.000007 rms=0.001533 Jy/beam
! Combined flux in latest and established models = 0.0773831 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 82 model components to the UV plane model.
! The established model now contains 180 components and 0.0773831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033457Jy  sigma=1.036256
! Fit after  self-cal, rms=0.033434Jy  sigma=1.035403
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.906588
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.01     KP        1.03     
!   LA        0.85     MK        1.04     NL        1.75     OV        1.06     
!   PT        0.68     SC        1.61     
! 
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.919423
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.94     HN        1.08     KP        1.01     
!   LA        0.86     MK        1.11     NL        1.69     OV        1.13     
!   PT        0.66     SC        1.18     
! 
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.880539
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.97     HN        1.27     KP        1.11     
!   LA        0.88     MK        0.98     NL        1.75     OV        1.13     
!   PT        0.66     SC        1.33     
! 
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.829911
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        1.02     HN        1.82     KP        1.14     
!   LA        0.84     MK        0.98     NL        1.78     OV        1.13     
!   PT        0.66     SC        1.40     
! 
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.819225
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.39     FD        0.99     HN        1.40     KP        1.16     
!   LA        0.87     MK        1.46     NL        1.25     OV        1.24     
!   PT        0.73     SC        1.71     
! 
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.835763
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.50     FD        1.09     HN        0.96     KP        1.27     
!   LA        0.84     MK        1.48     NL        1.43     OV        1.19     
!   PT        0.75     SC        1.44     
! 
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.871215
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.43     FD        1.07     HN        0.82     KP        1.25     
!   LA        0.84     MK        1.27     NL        1.37     OV        1.18     
!   PT        0.76     SC        1.48     
! 
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.860538
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        1.10     HN        0.90     KP        1.25     
!   LA        0.82     MK        1.34     NL        1.38     OV        1.20     
!   PT        0.80     SC        1.46     
! 
! 
! Fit before self-cal, rms=0.033434Jy  sigma=1.035403
! Fit after  self-cal, rms=0.031799Jy  sigma=1.070425
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031799Jy  sigma=1.070425
! Fit after  self-cal, rms=0.031927Jy  sigma=1.067754
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.101 mas, bmaj=4.772 mas, bpa=-1.809 degrees
! Estimated noise=0.10134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00998945 Jy
! Component: 100  -  total flux cleaned = -0.0145671 Jy
! Component: 150  -  total flux cleaned = -0.0169996 Jy
! Component: 200  -  total flux cleaned = -0.0183406 Jy
! Total flux subtracted in 200 components = -0.0183406 Jy
! Clean residual min=-0.002784 max=0.006240 Jy/beam
! Clean residual mean=-0.000005 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.0590425 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 83 model components to the UV plane model.
! The established model now contains 241 components and 0.0590425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030964Jy  sigma=0.970474
! Fit after  self-cal, rms=0.030956Jy  sigma=0.969994
! Inverting map 
! Added new window around map position (6, 14.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00770363 Jy
! Component: 100  -  total flux cleaned = 0.0113921 Jy
! Component: 150  -  total flux cleaned = 0.0132136 Jy
! Component: 200  -  total flux cleaned = 0.0143722 Jy
! Total flux subtracted in 200 components = 0.0143722 Jy
! Clean residual min=-0.001765 max=0.002903 Jy/beam
! Clean residual mean=-0.000001 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0734147 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 106 model components to the UV plane model.
! The established model now contains 344 components and 0.0734146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030046Jy  sigma=0.903847
! Fit after  self-cal, rms=0.029903Jy  sigma=0.896727
! Inverting map 
! Added new window around map position (48.6, 73.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384817 Jy
! Component: 100  -  total flux cleaned = 0.00573968 Jy
! Component: 150  -  total flux cleaned = 0.00705532 Jy
! Component: 200  -  total flux cleaned = 0.00785023 Jy
! Total flux subtracted in 200 components = 0.00785023 Jy
! Clean residual min=-0.001242 max=0.001321 Jy/beam
! Clean residual mean=-0.000002 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0812649 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 58 model components to the UV plane model.
! The established model now contains 389 components and 0.0812649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029541Jy  sigma=0.877652
! Fit after  self-cal, rms=0.029496Jy  sigma=0.875387
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029496Jy  sigma=0.875387
! Fit after  self-cal, rms=0.029387Jy  sigma=0.869396
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153127 Jy
! Component: 100  -  total flux cleaned = 0.00252941 Jy
! Component: 150  -  total flux cleaned = 0.00303727 Jy
! Component: 200  -  total flux cleaned = 0.00345283 Jy
! Total flux subtracted in 200 components = 0.00345283 Jy
! Clean residual min=-0.001153 max=0.001188 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0847177 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 415 components and 0.0847177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029298Jy  sigma=0.865233
! Fit after  self-cal, rms=0.029269Jy  sigma=0.863870
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.101 x 4.772 at -1.809 degrees (North through East)
! Clean map  min=-0.001241  max=0.01643 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.43 mas, bmaj=3.651 mas, bpa=0.004842 degrees
! Estimated noise=0.191202 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135935 Jy
! Component: 100  -  total flux cleaned = 0.0211248 Jy
! Component: 150  -  total flux cleaned = 0.0269291 Jy
! Component: 200  -  total flux cleaned = 0.0316174 Jy
! Total flux subtracted in 200 components = 0.0316174 Jy
! Clean residual min=-0.001676 max=0.002595 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0316174 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 67 model components to the UV plane model.
! The established model now contains 67 components and 0.0316174 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.101 mas, bmaj=4.772 mas, bpa=-1.809 degrees
! Estimated noise=0.10134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120834 Jy
! Component: 100  -  total flux cleaned = 0.0200813 Jy
! Component: 150  -  total flux cleaned = 0.0262699 Jy
! Component: 200  -  total flux cleaned = 0.0312846 Jy
! Total flux subtracted in 200 components = 0.0312846 Jy
! Clean residual min=-0.002870 max=0.003112 Jy/beam
! Clean residual mean=-0.000002 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.062902 Jy
! Adding 142 model components to the UV plane model.
! The established model now contains 192 components and 0.062902 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00411653 Jy
! Component: 100  -  total flux cleaned = 0.00753456 Jy
! Component: 150  -  total flux cleaned = 0.0103919 Jy
! Component: 200  -  total flux cleaned = 0.0127923 Jy
! Total flux subtracted in 200 components = 0.0127923 Jy
! Clean residual min=-0.001706 max=0.001861 Jy/beam
! Clean residual mean=-0.000001 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0756943 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 103 model components to the UV plane model.
! The established model now contains 277 components and 0.0756943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029408Jy  sigma=0.874532
! Fit after  self-cal, rms=0.029390Jy  sigma=0.873648
wmodel J0033+2255_C_map.mod
! Writing 277 model components to file: J0033+2255_C_map.mod
wobs   J0033+2255_C_uvs.fits
! Writing UV FITS file: J0033+2255_C_uvs.fits
wwins  J0033+2255_C_map.win
! wwins: Wrote 5 windows to J0033+2255_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079311 Jy
! Component: 100  -  total flux cleaned = 0.00122713 Jy
! Component: 150  -  total flux cleaned = 0.0016262 Jy
! Component: 200  -  total flux cleaned = 0.00197217 Jy
! Component: 250  -  total flux cleaned = 0.00213327 Jy
! Component: 300  -  total flux cleaned = 0.00233087 Jy
! Component: 350  -  total flux cleaned = 0.00258401 Jy
! Component: 400  -  total flux cleaned = 0.00280557 Jy
! Component: 450  -  total flux cleaned = 0.00305868 Jy
! Component: 500  -  total flux cleaned = 0.00326562 Jy
! Component: 550  -  total flux cleaned = 0.00343 Jy
! Component: 600  -  total flux cleaned = 0.00366014 Jy
! Component: 650  -  total flux cleaned = 0.00383147 Jy
! Component: 700  -  total flux cleaned = 0.00403146 Jy
! Component: 750  -  total flux cleaned = 0.0041944 Jy
! Component: 800  -  total flux cleaned = 0.00441676 Jy
! Component: 850  -  total flux cleaned = 0.00461809 Jy
! Component: 900  -  total flux cleaned = 0.00484484 Jy
! Component: 950  -  total flux cleaned = 0.00499256 Jy
! Component: 1000  -  total flux cleaned = 0.00510839 Jy
! Component: 1050  -  total flux cleaned = 0.00517952 Jy
! Component: 1100  -  total flux cleaned = 0.00524946 Jy
! Component: 1150  -  total flux cleaned = 0.00533168 Jy
! Component: 1200  -  total flux cleaned = 0.00535853 Jy
! Component: 1250  -  total flux cleaned = 0.00541136 Jy
! Component: 1300  -  total flux cleaned = 0.00543754 Jy
! Component: 1350  -  total flux cleaned = 0.00550168 Jy
! Component: 1400  -  total flux cleaned = 0.00548923 Jy
! Component: 1450  -  total flux cleaned = 0.00552659 Jy
! Component: 1500  -  total flux cleaned = 0.00556358 Jy
! Component: 1550  -  total flux cleaned = 0.00557553 Jy
! Component: 1600  -  total flux cleaned = 0.00557544 Jy
! Component: 1650  -  total flux cleaned = 0.005599 Jy
! Component: 1700  -  total flux cleaned = 0.00559899 Jy
! Component: 1750  -  total flux cleaned = 0.00561052 Jy
! Component: 1800  -  total flux cleaned = 0.00561054 Jy
! Component: 1850  -  total flux cleaned = 0.00563299 Jy
! Component: 1900  -  total flux cleaned = 0.00563285 Jy
! Component: 1950  -  total flux cleaned = 0.00564347 Jy
! Component: 2000  -  total flux cleaned = 0.0056325 Jy
! Component: 2050  -  total flux cleaned = 0.0056539 Jy
! Component: 2100  -  total flux cleaned = 0.00562218 Jy
! Component: 2150  -  total flux cleaned = 0.00565391 Jy
! Component: 2200  -  total flux cleaned = 0.00566423 Jy
! Component: 2250  -  total flux cleaned = 0.00566406 Jy
! Component: 2300  -  total flux cleaned = 0.00562303 Jy
! Component: 2350  -  total flux cleaned = 0.00560274 Jy
! Component: 2400  -  total flux cleaned = 0.00561279 Jy
! Component: 2450  -  total flux cleaned = 0.00558291 Jy
! Component: 2500  -  total flux cleaned = 0.00555326 Jy
! Component: 2550  -  total flux cleaned = 0.00551419 Jy
! Component: 2600  -  total flux cleaned = 0.00548521 Jy
! Component: 2650  -  total flux cleaned = 0.00543723 Jy
! Component: 2700  -  total flux cleaned = 0.00540874 Jy
! Component: 2750  -  total flux cleaned = 0.00535206 Jy
! Component: 2800  -  total flux cleaned = 0.00531475 Jy
! Component: 2850  -  total flux cleaned = 0.00527768 Jy
! Component: 2900  -  total flux cleaned = 0.00524086 Jy
! Component: 2950  -  total flux cleaned = 0.00522259 Jy
! Component: 3000  -  total flux cleaned = 0.0051591 Jy
! Component: 3050  -  total flux cleaned = 0.00509631 Jy
! Component: 3100  -  total flux cleaned = 0.00508741 Jy
! Component: 3150  -  total flux cleaned = 0.0050168 Jy
! Component: 3200  -  total flux cleaned = 0.00497297 Jy
! Component: 3250  -  total flux cleaned = 0.00493823 Jy
! Component: 3300  -  total flux cleaned = 0.00487773 Jy
! Component: 3350  -  total flux cleaned = 0.00487762 Jy
! Component: 3400  -  total flux cleaned = 0.00480103 Jy
! Component: 3450  -  total flux cleaned = 0.00471663 Jy
! Component: 3500  -  total flux cleaned = 0.00466641 Jy
! Component: 3550  -  total flux cleaned = 0.00464972 Jy
! Component: 3600  -  total flux cleaned = 0.0045754 Jy
! Component: 3650  -  total flux cleaned = 0.00455895 Jy
! Component: 3700  -  total flux cleaned = 0.00450198 Jy
! Component: 3750  -  total flux cleaned = 0.00443726 Jy
! Component: 3800  -  total flux cleaned = 0.00439712 Jy
! Component: 3850  -  total flux cleaned = 0.00432538 Jy
! Component: 3900  -  total flux cleaned = 0.00429386 Jy
! Component: 3950  -  total flux cleaned = 0.00425457 Jy
! Component: 4000  -  total flux cleaned = 0.00422332 Jy
! Component: 4050  -  total flux cleaned = 0.00418457 Jy
! Total flux subtracted in 4096 components = 0.00413827 Jy
! Clean residual min=-0.000430 max=0.000433 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0798326 Jy
keep
! Adding 506 model components to the UV plane model.
! The established model now contains 779 components and 0.0798326 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0033+2255_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.101 x 4.772 at -1.809 degrees (North through East)
! Clean map  min=-0.0009921  max=0.017615 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0033+2255_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0033+2255_C_a_map.mod
! Writing 779 model components to file: /vlbi/vcs9/uvm//J0033+2255_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0033+2255_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0033+2255_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0033+2255_C_a_map.win
! wwins: Wrote 6 windows to /vlbi/vcs9/uvm//J0033+2255_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0176151 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000164238 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.79711 2.79711 5.59423 11.1885 22.3769 44.7538 89.5076
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  107.253 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0033+2255_C_a_dfm.log closed on Tue Dec 26 20:54:31 2017