! Started logfile: /vlbi/vcs9/uvm//J0002-2153_X_a_dfm.log on Tue Dec 26 20:48:21 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0002-2153_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0002-2153_X_a_uvm.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! AN table 2: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.889831 visibilities/baseline/integration-bin. ! Found source: J0002-2153 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 8400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0002-2153_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0955379 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003043Jy sigma=22.742493 ! Fit after self-cal, rms=0.913844Jy sigma=20.665599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7907 mas, bmaj=2.152 mas, bpa=1.782 degrees ! Estimated noise=0.654428 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748094 Jy ! Component: 100 - total flux cleaned = 0.0849043 Jy ! Total flux subtracted in 100 components = 0.0849043 Jy ! Clean residual min=-0.002567 max=0.002683 Jy/beam ! Clean residual mean=0.000004 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0849043 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0849043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039418Jy sigma=0.683875 ! Fit after self-cal, rms=0.039412Jy sigma=0.683692 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=2.726 mas, bpa=0.4642 degrees ! Estimated noise=0.341254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359071 Jy ! Component: 100 - total flux cleaned = 0.00470966 Jy ! Component: 150 - total flux cleaned = 0.00488415 Jy ! Component: 200 - total flux cleaned = 0.00490142 Jy ! Total flux subtracted in 200 components = 0.00490142 Jy ! Clean residual min=-0.001384 max=0.001187 Jy/beam ! Clean residual mean=0.000003 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.0898057 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.0898057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039219Jy sigma=0.677621 ! Fit after self-cal, rms=0.039213Jy sigma=0.677506 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995828 ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.12 KP 0.99 LA 0.96 ! NL 0.97 OV 1.00 PT 1.00 SC 0.99 ! ! Amplitude normalization factor in sub-array 2: 0.988486 ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 KP 0.98 LA 1.02 ! MK 0.99 NL 1.03 OV 1.00 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996896 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.98 KP 0.99 LA 1.01 ! NL 1.09 OV 0.97 PT 0.96 SC 1.02 ! ! Amplitude normalization factor in sub-array 2: 1.00332 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 KP 1.00 LA 1.04 ! MK 0.96 NL 1.01 OV 1.02 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.984284 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.06 KP 1.03 LA 1.00 ! NL 1.08 OV 0.99 PT 0.96 SC 1.02 ! ! Amplitude normalization factor in sub-array 2: 0.986213 ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 KP 1.01 LA 0.98 ! MK 0.98 NL 1.06 OV 1.03 PT 0.98 ! SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00329 ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.08 KP 1.01 LA 0.96 ! NL 1.03 OV 0.98 PT 0.97 SC 0.94 ! ! Amplitude normalization factor in sub-array 2: 0.991667 ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 KP 0.99 LA 1.02 ! MK 0.99 NL 1.02 OV 0.99 PT 1.01 ! SC 0.97 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.00902 ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.01 KP 0.95 LA 1.02 ! NL 0.98 OV 1.06 PT 0.95 SC 0.99 ! ! Amplitude normalization factor in sub-array 2: 0.996779 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 KP 0.99 LA 1.02 ! MK 1.04 NL 1.01 OV 1.00 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.994438 ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.07 KP 0.93 LA 1.01 ! NL 1.01 OV 1.09 PT 0.96 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 0.99333 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.09 KP 1.03 LA 1.05 ! MK 0.96 NL 0.96 OV 1.00 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.00857 ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.03 KP 1.02 LA 0.99 ! NL 1.05 OV 0.98 PT 0.95 SC 0.99 ! ! Amplitude normalization factor in sub-array 2: 0.997567 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 KP 0.97 LA 1.02 ! MK 1.02 NL 1.02 OV 0.99 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.01491 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.03 KP 0.93 LA 1.00 ! NL 0.98 OV 1.00 PT 1.02 SC 0.94 ! ! Amplitude normalization factor in sub-array 2: 1.00225 ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.95 KP 1.01 LA 1.02 ! MK 1.03 NL 0.98 OV 0.92 PT 1.01 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.039213Jy sigma=0.677506 ! Fit after self-cal, rms=0.039026Jy sigma=0.671847 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039026Jy sigma=0.671847 ! Fit after self-cal, rms=0.039028Jy sigma=0.671841 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=2.728 mas, bpa=0.4502 degrees ! Estimated noise=0.338957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340188 Jy ! Component: 100 - total flux cleaned = -0.000396217 Jy ! Component: 150 - total flux cleaned = -0.000442471 Jy ! Component: 200 - total flux cleaned = -0.000481502 Jy ! Total flux subtracted in 200 components = -0.000481502 Jy ! Clean residual min=-0.001127 max=0.001010 Jy/beam ! Clean residual mean=0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0893242 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.0893242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039019Jy sigma=0.671478 ! Fit after self-cal, rms=0.039017Jy sigma=0.671433 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039017Jy sigma=0.671433 ! Fit after self-cal, rms=0.039012Jy sigma=0.671342 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.77529e-05 Jy ! Component: 100 - total flux cleaned = 1.03805e-06 Jy ! Component: 150 - total flux cleaned = -2.07481e-05 Jy ! Component: 200 - total flux cleaned = -3.02625e-05 Jy ! Total flux subtracted in 200 components = -3.02625e-05 Jy ! Clean residual min=-0.001117 max=0.001003 Jy/beam ! Clean residual mean=0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0892939 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0892939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039008Jy sigma=0.671180 ! Fit after self-cal, rms=0.039005Jy sigma=0.671117 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 2.728 at 0.4502 degrees (North through East) ! Clean map min=-0.0010745 max=0.086104 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7887 mas, bmaj=2.15 mas, bpa=1.872 degrees ! Estimated noise=0.652398 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.074594 Jy ! Component: 100 - total flux cleaned = 0.0846853 Jy ! Component: 150 - total flux cleaned = 0.087481 Jy ! Component: 200 - total flux cleaned = 0.088308 Jy ! Total flux subtracted in 200 components = 0.088308 Jy ! Clean residual min=-0.002232 max=0.002054 Jy/beam ! Clean residual mean=0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.088308 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.088308 Jy ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=2.728 mas, bpa=0.4502 degrees ! Estimated noise=0.338957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145375 Jy ! Component: 100 - total flux cleaned = 0.00146071 Jy ! Component: 150 - total flux cleaned = 0.00139588 Jy ! Component: 200 - total flux cleaned = 0.00133849 Jy ! Total flux subtracted in 200 components = 0.00133849 Jy ! Clean residual min=-0.001110 max=0.001014 Jy/beam ! Clean residual mean=0.000002 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0896464 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.0896465 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.09935e-05 Jy ! Component: 100 - total flux cleaned = -8.1829e-05 Jy ! Component: 150 - total flux cleaned = -0.000110011 Jy ! Component: 200 - total flux cleaned = -0.000135621 Jy ! Total flux subtracted in 200 components = -0.000135621 Jy ! Clean residual min=-0.001088 max=0.000987 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0895108 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.0895108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038982Jy sigma=0.670546 ! Fit after self-cal, rms=0.038979Jy sigma=0.670485 wmodel J0002-2153_X_map.mod ! Writing 39 model components to file: J0002-2153_X_map.mod wobs J0002-2153_X_uvs.fits ! Writing UV FITS file: J0002-2153_X_uvs.fits wwins J0002-2153_X_map.win ! wwins: Wrote 2 windows to J0002-2153_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339467 Jy ! Component: 100 - total flux cleaned = -0.000270346 Jy ! Component: 150 - total flux cleaned = -0.000204669 Jy ! Component: 200 - total flux cleaned = -9.47893e-05 Jy ! Component: 250 - total flux cleaned = -3.41781e-05 Jy ! Component: 300 - total flux cleaned = 1.0187e-05 Jy ! Component: 350 - total flux cleaned = 3.88387e-05 Jy ! Component: 400 - total flux cleaned = 5.26583e-05 Jy ! Component: 450 - total flux cleaned = 6.61039e-05 Jy ! Component: 500 - total flux cleaned = 5.30835e-05 Jy ! Component: 550 - total flux cleaned = 9.17761e-05 Jy ! Component: 600 - total flux cleaned = 0.000129282 Jy ! Component: 650 - total flux cleaned = 0.000190646 Jy ! Component: 700 - total flux cleaned = 0.00026279 Jy ! Component: 750 - total flux cleaned = 0.000309824 Jy ! Component: 800 - total flux cleaned = 0.000390696 Jy ! Component: 850 - total flux cleaned = 0.000436062 Jy ! Component: 900 - total flux cleaned = 0.000514212 Jy ! Component: 950 - total flux cleaned = 0.000590926 Jy ! Component: 1000 - total flux cleaned = 0.000655617 Jy ! Component: 1050 - total flux cleaned = 0.000730125 Jy ! Component: 1100 - total flux cleaned = 0.000824135 Jy ! Component: 1150 - total flux cleaned = 0.000885975 Jy ! Component: 1200 - total flux cleaned = 0.000977387 Jy ! Component: 1250 - total flux cleaned = 0.00104726 Jy ! Component: 1300 - total flux cleaned = 0.00109648 Jy ! Component: 1350 - total flux cleaned = 0.00115496 Jy ! Component: 1400 - total flux cleaned = 0.00123174 Jy ! Component: 1450 - total flux cleaned = 0.00129792 Jy ! Component: 1500 - total flux cleaned = 0.00136305 Jy ! Component: 1550 - total flux cleaned = 0.00138156 Jy ! Component: 1600 - total flux cleaned = 0.00143623 Jy ! Component: 1650 - total flux cleaned = 0.00148125 Jy ! Component: 1700 - total flux cleaned = 0.00155227 Jy ! Component: 1750 - total flux cleaned = 0.00160464 Jy ! Component: 1800 - total flux cleaned = 0.00164784 Jy ! Component: 1850 - total flux cleaned = 0.00172464 Jy ! Component: 1900 - total flux cleaned = 0.0017584 Jy ! Component: 1950 - total flux cleaned = 0.00184212 Jy ! Component: 2000 - total flux cleaned = 0.00190816 Jy ! Component: 2050 - total flux cleaned = 0.00194903 Jy ! Component: 2100 - total flux cleaned = 0.0020218 Jy ! Component: 2150 - total flux cleaned = 0.00206968 Jy ! Component: 2200 - total flux cleaned = 0.00215661 Jy ! Component: 2250 - total flux cleaned = 0.00217236 Jy ! Component: 2300 - total flux cleaned = 0.00227314 Jy ! Component: 2350 - total flux cleaned = 0.00232673 Jy ! Component: 2400 - total flux cleaned = 0.002395 Jy ! Component: 2450 - total flux cleaned = 0.00245517 Jy ! Component: 2500 - total flux cleaned = 0.00251477 Jy ! Component: 2550 - total flux cleaned = 0.00258114 Jy ! Component: 2600 - total flux cleaned = 0.00266889 Jy ! Component: 2650 - total flux cleaned = 0.00271954 Jy ! Component: 2700 - total flux cleaned = 0.00278417 Jy ! Component: 2750 - total flux cleaned = 0.0028482 Jy ! Component: 2800 - total flux cleaned = 0.00288342 Jy ! Component: 2850 - total flux cleaned = 0.00295326 Jy ! Component: 2900 - total flux cleaned = 0.00302944 Jy ! Component: 2950 - total flux cleaned = 0.00307748 Jy ! Component: 3000 - total flux cleaned = 0.00311151 Jy ! Component: 3050 - total flux cleaned = 0.00315871 Jy ! Component: 3100 - total flux cleaned = 0.00321888 Jy ! Component: 3150 - total flux cleaned = 0.00325206 Jy ! Component: 3200 - total flux cleaned = 0.00331127 Jy ! Component: 3250 - total flux cleaned = 0.00335045 Jy ! Component: 3300 - total flux cleaned = 0.00340222 Jy ! Component: 3350 - total flux cleaned = 0.00344723 Jy ! Component: 3400 - total flux cleaned = 0.00348553 Jy ! Component: 3450 - total flux cleaned = 0.00354251 Jy ! Component: 3500 - total flux cleaned = 0.00358023 Jy ! Component: 3550 - total flux cleaned = 0.00363014 Jy ! Component: 3600 - total flux cleaned = 0.00367349 Jy ! Component: 3650 - total flux cleaned = 0.00372275 Jy ! Component: 3700 - total flux cleaned = 0.00375933 Jy ! Component: 3750 - total flux cleaned = 0.00383212 Jy ! Component: 3800 - total flux cleaned = 0.00388029 Jy ! Component: 3850 - total flux cleaned = 0.00392218 Jy ! Component: 3900 - total flux cleaned = 0.0039755 Jy ! Component: 3950 - total flux cleaned = 0.0040167 Jy ! Component: 4000 - total flux cleaned = 0.00406935 Jy ! Component: 4050 - total flux cleaned = 0.00411 Jy ! Total flux subtracted in 4096 components = 0.00412729 Jy ! Clean residual min=-0.000376 max=0.000370 Jy/beam ! Clean residual mean=0.000000 rms=0.000100 Jy/beam ! Combined flux in latest and established models = 0.0936381 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 286 components and 0.0936381 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0002-2153_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 2.728 at 0.4502 degrees (North through East) ! Clean map min=-0.00083268 max=0.086258 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0002-2153_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0002-2153_X_a_map.mod ! Writing 286 model components to file: /vlbi/vcs9/uvm//J0002-2153_X_a_map.mod wobs /vlbi/vcs9/uvm//J0002-2153_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0002-2153_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0002-2153_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0002-2153_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0862579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000100286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.348787 0.348787 0.697574 1.39515 2.7903 5.5806 11.1612 22.3224 44.6448 89.2895 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.086 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 860.123 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0002-2153_X_a_dfm.log closed on Tue Dec 26 20:48:24 2017