! Started logfile: /vlbi/vcs9/uvm//J0002-0024_X_a_dfm.log on Tue Dec 26 20:48:13 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J0002-0024_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0002-0024_X_a_uvm.fits ! AN table 1: 29 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.947983 visibilities/baseline/integration-bin. ! Found source: J0002-0024 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 14288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J0002-0024_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0433144 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000319Jy sigma=24.238640 ! Fit after self-cal, rms=0.973392Jy sigma=23.583417 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7785 mas, bmaj=2.159 mas, bpa=-9.407 degrees ! Estimated noise=0.401666 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232111 Jy ! Component: 100 - total flux cleaned = 0.0264629 Jy ! Total flux subtracted in 100 components = 0.0264629 Jy ! Clean residual min=-0.001530 max=0.001673 Jy/beam ! Clean residual mean=0.000000 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0264629 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0264629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033717Jy sigma=0.733172 ! Fit after self-cal, rms=0.033700Jy sigma=0.732502 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=2.68 mas, bpa=-11.26 degrees ! Estimated noise=0.244112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144405 Jy ! Component: 100 - total flux cleaned = 0.00200723 Jy ! Component: 150 - total flux cleaned = 0.00218477 Jy ! Component: 200 - total flux cleaned = 0.0022193 Jy ! Total flux subtracted in 200 components = 0.0022193 Jy ! Clean residual min=-0.001224 max=0.001236 Jy/beam ! Clean residual mean=0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0286822 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.0286822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033661Jy sigma=0.731412 ! Fit after self-cal, rms=0.033660Jy sigma=0.731395 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.09252 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.90 KP 0.92 LA 0.97 ! MK 0.88 NL 0.92 OV 0.90 PT 0.92 ! SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.968787 ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.92 HN 1.06 KP 1.06 ! LA 1.05 MK 0.98 NL 1.14 OV 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972098 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.96 KP 1.01 LA 1.03 ! MK 0.95 NL 1.12 OV 0.99 PT 1.00 ! SC 1.25 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.967982 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 1.22 KP 1.02 ! LA 1.04 MK 1.05 NL 1.02 OV 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0722 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.90 KP 0.89 LA 0.96 ! MK 0.89 NL 0.95 OV 0.91 PT 0.92 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.864164 ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.13 HN 1.56 KP 0.88 ! LA 1.13 MK 1.19 NL 1.19 OV 1.12 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04518 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.97 KP 1.01 LA 0.96 ! MK 0.86 NL 1.07 OV 0.87 PT 0.95 ! SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.872155 ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.27 HN 1.02 KP 1.00 ! LA 1.09 MK 1.01 NL 1.28 OV 1.36 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.02178 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.91 KP 0.96 LA 1.00 ! MK 1.04 NL 0.94 OV 0.96 PT 0.97 ! SC 1.11 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.948349 ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.07 HN 1.06 KP 1.03 ! LA 1.07 MK 1.18 NL 1.02 OV 0.85 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.973366 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 1.07 KP 1.04 LA 1.11 ! MK 0.93 NL 0.95 OV 1.05 PT 0.99 ! SC 1.17 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.957574 ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.09 HN 1.09 KP 0.95 ! LA 1.13 MK 1.02 NL 1.08 OV 0.92 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.03752 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.91 KP 0.91 LA 0.99 ! MK 0.96 NL 0.98 OV 0.97 PT 1.02 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.972121 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 0.95 KP 0.97 ! LA 1.31 MK 1.07 NL 1.17 OV 0.83 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.06347 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.96 KP 0.94 LA 0.95 ! MK 1.02 NL 0.96 OV 0.89 PT 0.91 ! SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.90457 ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.05 HN 1.19 KP 1.10 ! LA 1.01 MK 1.13 NL 1.31 OV 1.01 ! ! ! Fit before self-cal, rms=0.033660Jy sigma=0.731395 ! Fit after self-cal, rms=0.034373Jy sigma=0.730196 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034373Jy sigma=0.730196 ! Fit after self-cal, rms=0.034375Jy sigma=0.730188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9957 mas, bmaj=2.752 mas, bpa=-12.24 degrees ! Estimated noise=0.237465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000871452 Jy ! Component: 100 - total flux cleaned = -0.000929041 Jy ! Component: 150 - total flux cleaned = -0.000950129 Jy ! Component: 200 - total flux cleaned = -0.000933354 Jy ! Total flux subtracted in 200 components = -0.000933354 Jy ! Clean residual min=-0.001263 max=0.001218 Jy/beam ! Clean residual mean=-0.000000 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.0277489 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0277489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034361Jy sigma=0.729728 ! Fit after self-cal, rms=0.034360Jy sigma=0.729721 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034360Jy sigma=0.729721 ! Fit after self-cal, rms=0.034295Jy sigma=0.728151 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105761 Jy ! Component: 100 - total flux cleaned = 0.000140943 Jy ! Component: 150 - total flux cleaned = 0.000153319 Jy ! Component: 200 - total flux cleaned = 0.000165149 Jy ! Total flux subtracted in 200 components = 0.000165149 Jy ! Clean residual min=-0.001254 max=0.001204 Jy/beam ! Clean residual mean=-0.000000 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.027914 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.027914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034292Jy sigma=0.728097 ! Fit after self-cal, rms=0.034284Jy sigma=0.727857 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9957 x 2.752 at -12.24 degrees (North through East) ! Clean map min=-0.0011847 max=0.026542 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.781 mas, bmaj=2.197 mas, bpa=-10.06 degrees ! Estimated noise=0.396706 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230252 Jy ! Component: 100 - total flux cleaned = 0.0263856 Jy ! Component: 150 - total flux cleaned = 0.0270588 Jy ! Component: 200 - total flux cleaned = 0.0270916 Jy ! Total flux subtracted in 200 components = 0.0270916 Jy ! Clean residual min=-0.001370 max=0.001543 Jy/beam ! Clean residual mean=-0.000000 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0270916 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0270916 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9957 mas, bmaj=2.752 mas, bpa=-12.24 degrees ! Estimated noise=0.237465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.6, -26.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156599 Jy ! Component: 100 - total flux cleaned = 0.0020403 Jy ! Component: 150 - total flux cleaned = 0.00198349 Jy ! Component: 200 - total flux cleaned = 0.00188674 Jy ! Total flux subtracted in 200 components = 0.00188674 Jy ! Clean residual min=-0.001020 max=0.001104 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0289784 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.0289784 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.08576e-05 Jy ! Component: 100 - total flux cleaned = -0.000121143 Jy ! Component: 150 - total flux cleaned = -0.000132431 Jy ! Component: 200 - total flux cleaned = -0.00014282 Jy ! Total flux subtracted in 200 components = -0.00014282 Jy ! Clean residual min=-0.001000 max=0.001061 Jy/beam ! Clean residual mean=-0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0288355 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.0288355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034240Jy sigma=0.726602 ! Fit after self-cal, rms=0.034237Jy sigma=0.726453 wmodel J0002-0024_X_map.mod ! Writing 40 model components to file: J0002-0024_X_map.mod wobs J0002-0024_X_uvs.fits ! Writing UV FITS file: J0002-0024_X_uvs.fits wwins J0002-0024_X_map.win ! wwins: Wrote 2 windows to J0002-0024_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.93232e-05 Jy ! Component: 100 - total flux cleaned = 3.89583e-05 Jy ! Component: 150 - total flux cleaned = -7.59294e-05 Jy ! Component: 200 - total flux cleaned = -0.000153993 Jy ! Component: 250 - total flux cleaned = -0.000183586 Jy ! Component: 300 - total flux cleaned = -0.000212632 Jy ! Component: 350 - total flux cleaned = -0.000267937 Jy ! Component: 400 - total flux cleaned = -0.000294444 Jy ! Component: 450 - total flux cleaned = -0.000359456 Jy ! Component: 500 - total flux cleaned = -0.000422418 Jy ! Component: 550 - total flux cleaned = -0.000495709 Jy ! Component: 600 - total flux cleaned = -0.000519249 Jy ! Component: 650 - total flux cleaned = -0.000542584 Jy ! Component: 700 - total flux cleaned = -0.000565097 Jy ! Component: 750 - total flux cleaned = -0.000587128 Jy ! Component: 800 - total flux cleaned = -0.000597716 Jy ! Component: 850 - total flux cleaned = -0.000597779 Jy ! Component: 900 - total flux cleaned = -0.000618366 Jy ! Component: 950 - total flux cleaned = -0.000618364 Jy ! Component: 1000 - total flux cleaned = -0.00059861 Jy ! Component: 1050 - total flux cleaned = -0.000579409 Jy ! Component: 1100 - total flux cleaned = -0.000551489 Jy ! Component: 1150 - total flux cleaned = -0.000515238 Jy ! Component: 1200 - total flux cleaned = -0.000470559 Jy ! Component: 1250 - total flux cleaned = -0.000444426 Jy ! Component: 1300 - total flux cleaned = -0.000401508 Jy ! Component: 1350 - total flux cleaned = -0.000384592 Jy ! Component: 1400 - total flux cleaned = -0.000351572 Jy ! Component: 1450 - total flux cleaned = -0.000302697 Jy ! Component: 1500 - total flux cleaned = -0.000286645 Jy ! Component: 1550 - total flux cleaned = -0.000239356 Jy ! Component: 1600 - total flux cleaned = -0.000231647 Jy ! Component: 1650 - total flux cleaned = -0.000193614 Jy ! Component: 1700 - total flux cleaned = -0.000178679 Jy ! Component: 1750 - total flux cleaned = -0.000171307 Jy ! Component: 1800 - total flux cleaned = -0.000149348 Jy ! Component: 1850 - total flux cleaned = -9.88751e-05 Jy ! Component: 1900 - total flux cleaned = -7.05072e-05 Jy ! Component: 1950 - total flux cleaned = -6.34048e-05 Jy ! Component: 2000 - total flux cleaned = -2.87605e-05 Jy ! Component: 2050 - total flux cleaned = 1.90171e-05 Jy ! Component: 2100 - total flux cleaned = 4.59018e-05 Jy ! Component: 2150 - total flux cleaned = 6.59718e-05 Jy ! Component: 2200 - total flux cleaned = 8.58361e-05 Jy ! Component: 2250 - total flux cleaned = 0.000105363 Jy ! Component: 2300 - total flux cleaned = 0.000131218 Jy ! Component: 2350 - total flux cleaned = 0.000175787 Jy ! Component: 2400 - total flux cleaned = 0.00019468 Jy ! Component: 2450 - total flux cleaned = 0.000213352 Jy ! Component: 2500 - total flux cleaned = 0.00023187 Jy ! Component: 2550 - total flux cleaned = 0.00025633 Jy ! Component: 2600 - total flux cleaned = 0.000298467 Jy ! Component: 2650 - total flux cleaned = 0.000322235 Jy ! Component: 2700 - total flux cleaned = 0.000334 Jy ! Component: 2750 - total flux cleaned = 0.000322263 Jy ! Component: 2800 - total flux cleaned = 0.000362775 Jy ! Component: 2850 - total flux cleaned = 0.000368488 Jy ! Component: 2900 - total flux cleaned = 0.000379897 Jy ! Component: 2950 - total flux cleaned = 0.00040807 Jy ! Component: 3000 - total flux cleaned = 0.000430298 Jy ! Component: 3050 - total flux cleaned = 0.000457812 Jy ! Component: 3100 - total flux cleaned = 0.000468725 Jy ! Component: 3150 - total flux cleaned = 0.000474199 Jy ! Component: 3200 - total flux cleaned = 0.000495631 Jy ! Component: 3250 - total flux cleaned = 0.000516976 Jy ! Component: 3300 - total flux cleaned = 0.000538057 Jy ! Component: 3350 - total flux cleaned = 0.000553805 Jy ! Component: 3400 - total flux cleaned = 0.000595377 Jy ! Component: 3450 - total flux cleaned = 0.000610877 Jy ! Component: 3500 - total flux cleaned = 0.000621097 Jy ! Component: 3550 - total flux cleaned = 0.000641428 Jy ! Component: 3600 - total flux cleaned = 0.000666645 Jy ! Component: 3650 - total flux cleaned = 0.00069666 Jy ! Component: 3700 - total flux cleaned = 0.000706656 Jy ! Component: 3750 - total flux cleaned = 0.000736209 Jy ! Component: 3800 - total flux cleaned = 0.000750912 Jy ! Component: 3850 - total flux cleaned = 0.000765503 Jy ! Component: 3900 - total flux cleaned = 0.000804157 Jy ! Component: 3950 - total flux cleaned = 0.00080899 Jy ! Component: 4000 - total flux cleaned = 0.000847128 Jy ! Component: 4050 - total flux cleaned = 0.000875534 Jy ! Total flux subtracted in 4096 components = 0.000913193 Jy ! Clean residual min=-0.000235 max=0.000287 Jy/beam ! Clean residual mean=0.000000 rms=0.000086 Jy/beam ! Combined flux in latest and established models = 0.0297487 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 377 components and 0.0297487 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0002-0024_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9957 x 2.752 at -12.24 degrees (North through East) ! Clean map min=-0.00064413 max=0.026219 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0002-0024_X_a_map.fits wmodel /vlbi/vcs9/uvm//J0002-0024_X_a_map.mod ! Writing 377 model components to file: /vlbi/vcs9/uvm//J0002-0024_X_a_map.mod wobs /vlbi/vcs9/uvm//J0002-0024_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0002-0024_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J0002-0024_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J0002-0024_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0262194 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.35987e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.956528 0.956528 1.91306 3.82611 7.65223 15.3045 30.6089 61.2178 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.026 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 313.634 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0002-0024_X_a_dfm.log closed on Tue Dec 26 20:48:16 2017