! Started logfile: J2219-0051_X_2007_01_11_yyk_uvs.log on Mon Jun 16 20:06:18 2008 obs J2219-0051_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J2219-0051_X_2007_01_11_yyk_uve.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.883681 visibilities/baseline/integration-bin. ! Found source: J2219-0051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 2036 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2219-0051_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.124051 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6856 mas, bmaj=1.852 mas, bpa=-1.317 degrees ! Estimated noise=1.17576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0853903 Jy ! Component: 100 - total flux cleaned = 0.10562 Jy ! Total flux subtracted in 100 components = 0.10562 Jy ! Clean residual min=-0.007553 max=0.009922 Jy/beam ! Clean residual mean=-0.000002 rms=0.002033 Jy/beam ! Combined flux in latest and established models = 0.10562 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.10562 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.068556Jy sigma=1.196250 ! Fit after self-cal, rms=0.066707Jy sigma=1.163763 ! Inverting map and beam ! Estimated beam: bmin=0.6852 mas, bmaj=1.851 mas, bpa=-1.351 degrees ! Estimated noise=1.17672 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8533 mas, bmaj=2.153 mas, bpa=-2.792 degrees ! Estimated noise=0.868627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121947 Jy ! Component: 100 - total flux cleaned = 0.0164752 Jy ! Component: 150 - total flux cleaned = 0.0183709 Jy ! Component: 200 - total flux cleaned = 0.0187583 Jy ! Total flux subtracted in 200 components = 0.0187583 Jy ! Clean residual min=-0.005478 max=0.004994 Jy/beam ! Clean residual mean=-0.000004 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.124379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.124379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065464Jy sigma=1.133663 ! Fit after self-cal, rms=0.063255Jy sigma=1.091355 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8533 x 2.153 at -2.792 degrees (North through East) ! Clean map min=-0.0047301 max=0.104 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.99 KP 0.95 ! LA 1.02 MK 0.93 OV 0.97 PT 0.99 ! SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.063255Jy sigma=1.091355 ! Fit after self-cal, rms=0.063117Jy sigma=1.090374 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063117Jy sigma=1.090374 ! Fit after self-cal, rms=0.062911Jy sigma=1.087530 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.142 mas, bpa=-2.879 degrees ! Estimated noise=0.86862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892322 Jy ! Component: 100 - total flux cleaned = 0.000582933 Jy ! Component: 150 - total flux cleaned = 0.000429859 Jy ! Component: 200 - total flux cleaned = 0.000420104 Jy ! Total flux subtracted in 200 components = 0.000420104 Jy ! Clean residual min=-0.004646 max=0.004267 Jy/beam ! Clean residual mean=-0.000003 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.124799 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.124799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062636Jy sigma=1.083489 ! Fit after self-cal, rms=0.062435Jy sigma=1.080692 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062435Jy sigma=1.080692 ! Fit after self-cal, rms=0.052294Jy sigma=0.922736 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379763 Jy ! Component: 100 - total flux cleaned = 0.00348934 Jy ! Component: 150 - total flux cleaned = 0.0032181 Jy ! Component: 200 - total flux cleaned = 0.00317592 Jy ! Total flux subtracted in 200 components = 0.00317592 Jy ! Clean residual min=-0.004380 max=0.003611 Jy/beam ! Clean residual mean=-0.000003 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.127975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.127975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051925Jy sigma=0.916421 ! Fit after self-cal, rms=0.051480Jy sigma=0.911143 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8423 x 2.142 at -2.879 degrees (North through East) ! Clean map min=-0.0040804 max=0.10942 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051480Jy sigma=0.911143 ! Fit after self-cal, rms=0.050386Jy sigma=0.900705 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050386Jy sigma=0.900705 ! Fit after self-cal, rms=0.050322Jy sigma=0.899926 ! Inverting map and beam ! Estimated beam: bmin=0.8376 mas, bmaj=2.143 mas, bpa=-2.477 degrees ! Estimated noise=0.856866 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138868 Jy ! Component: 100 - total flux cleaned = -0.00167315 Jy ! Component: 150 - total flux cleaned = -0.00169455 Jy ! Component: 200 - total flux cleaned = -0.00171473 Jy ! Total flux subtracted in 200 components = -0.00171473 Jy ! Clean residual min=-0.003556 max=0.003173 Jy/beam ! Clean residual mean=0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.12626 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.12626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050287Jy sigma=0.899314 ! Fit after self-cal, rms=0.050266Jy sigma=0.899148 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050266Jy sigma=0.899148 ! Fit after self-cal, rms=0.050036Jy sigma=0.896345 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050036Jy sigma=0.896345 ! Fit after self-cal, rms=0.050030Jy sigma=0.896235 ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=2.14 mas, bpa=-2.305 degrees ! Estimated noise=0.849294 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000576861 Jy ! Component: 100 - total flux cleaned = -0.00068406 Jy ! Component: 150 - total flux cleaned = -0.000748731 Jy ! Component: 200 - total flux cleaned = -0.000786117 Jy ! Total flux subtracted in 200 components = -0.000786117 Jy ! Clean residual min=-0.003388 max=0.003158 Jy/beam ! Clean residual mean=0.000000 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.125474 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.125474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050019Jy sigma=0.895849 ! Fit after self-cal, rms=0.050014Jy sigma=0.895818 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=3.712 mas, bpa=11.83 degrees ! Estimated noise=1.12921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523052 Jy ! Component: 100 - total flux cleaned = 0.000476382 Jy ! Component: 150 - total flux cleaned = 0.00047451 Jy ! Component: 200 - total flux cleaned = 0.000475126 Jy ! Total flux subtracted in 200 components = 0.000475126 Jy ! Clean residual min=-0.004306 max=0.003816 Jy/beam ! Clean residual mean=0.000000 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.125949 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.125949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050038Jy sigma=0.896025 ! Fit after self-cal, rms=0.050025Jy sigma=0.895832 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6799 mas, bmaj=1.853 mas, bpa=-1.23 degrees ! Estimated noise=1.14907 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0906578 Jy ! Component: 100 - total flux cleaned = 0.109737 Jy ! Component: 150 - total flux cleaned = 0.116911 Jy ! Component: 200 - total flux cleaned = 0.120804 Jy ! Total flux subtracted in 200 components = 0.120804 Jy ! Clean residual min=-0.004114 max=0.004184 Jy/beam ! Clean residual mean=0.000001 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.120804 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.120804 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=2.14 mas, bpa=-2.305 degrees ! Estimated noise=0.849294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394945 Jy ! Component: 100 - total flux cleaned = 0.00429721 Jy ! Component: 150 - total flux cleaned = 0.00455446 Jy ! Component: 200 - total flux cleaned = 0.00470822 Jy ! Total flux subtracted in 200 components = 0.00470822 Jy ! Clean residual min=-0.003376 max=0.003143 Jy/beam ! Clean residual mean=0.000000 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.125513 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.125513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=3.712 mas, bpa=11.83 degrees ! Estimated noise=1.12921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609208 Jy ! Component: 100 - total flux cleaned = 0.000542087 Jy ! Component: 150 - total flux cleaned = 0.000525542 Jy ! Component: 200 - total flux cleaned = 0.00051197 Jy ! Total flux subtracted in 200 components = 0.00051197 Jy ! Clean residual min=-0.004291 max=0.003827 Jy/beam ! Clean residual mean=0.000000 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.126025 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.126025 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=2.14 mas, bpa=-2.305 degrees ! Estimated noise=0.849294 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436439 Jy ! Component: 100 - total flux cleaned = -0.000298157 Jy ! Component: 150 - total flux cleaned = -0.000263142 Jy ! Component: 200 - total flux cleaned = -0.000292691 Jy ! Total flux subtracted in 200 components = -0.000292691 Jy ! Clean residual min=-0.003336 max=0.003073 Jy/beam ! Clean residual mean=0.000000 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.125732 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.125732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050003Jy sigma=0.895629 ! Fit after self-cal, rms=0.049999Jy sigma=0.895609 wmodel J2219-0051_X_2007_01_11_yyk\_map.mod ! Writing 38 model components to file: J2219-0051_X_2007_01_11_yyk_map.mod wobs J2219-0051_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J2219-0051_X_2007_01_11_yyk_uvs.fits wwins J2219-0051_X_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J2219-0051_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012327 Jy ! Component: 100 - total flux cleaned = -0.0018426 Jy ! Component: 150 - total flux cleaned = -0.00236332 Jy ! Component: 200 - total flux cleaned = -0.0027573 Jy ! Component: 250 - total flux cleaned = -0.00313466 Jy ! Component: 300 - total flux cleaned = -0.00354196 Jy ! Component: 350 - total flux cleaned = -0.00384611 Jy ! Component: 400 - total flux cleaned = -0.00422303 Jy ! Component: 450 - total flux cleaned = -0.0045057 Jy ! Component: 500 - total flux cleaned = -0.00462374 Jy ! Component: 550 - total flux cleaned = -0.00474007 Jy ! Component: 600 - total flux cleaned = -0.00488946 Jy ! Component: 650 - total flux cleaned = -0.00496161 Jy ! Component: 700 - total flux cleaned = -0.00496112 Jy ! Component: 750 - total flux cleaned = -0.0050309 Jy ! Component: 800 - total flux cleaned = -0.00513331 Jy ! Component: 850 - total flux cleaned = -0.00526603 Jy ! Component: 900 - total flux cleaned = -0.00523381 Jy ! Component: 950 - total flux cleaned = -0.00526559 Jy ! Component: 1000 - total flux cleaned = -0.00529753 Jy ! Component: 1050 - total flux cleaned = -0.00542064 Jy ! Component: 1100 - total flux cleaned = -0.00548114 Jy ! Component: 1150 - total flux cleaned = -0.00551018 Jy ! Component: 1200 - total flux cleaned = -0.00556885 Jy ! Component: 1250 - total flux cleaned = -0.005684 Jy ! Component: 1300 - total flux cleaned = -0.00571263 Jy ! Component: 1350 - total flux cleaned = -0.00585192 Jy ! Component: 1400 - total flux cleaned = -0.00587952 Jy ! Component: 1450 - total flux cleaned = -0.00606941 Jy ! Component: 1500 - total flux cleaned = -0.00612295 Jy ! Component: 1550 - total flux cleaned = -0.00628215 Jy ! Component: 1600 - total flux cleaned = -0.00641265 Jy ! Component: 1650 - total flux cleaned = -0.0065414 Jy ! Component: 1700 - total flux cleaned = -0.00671999 Jy ! Component: 1750 - total flux cleaned = -0.00687114 Jy ! Component: 1800 - total flux cleaned = -0.00697023 Jy ! Component: 1850 - total flux cleaned = -0.0071173 Jy ! Component: 1900 - total flux cleaned = -0.0072141 Jy ! Component: 1950 - total flux cleaned = -0.00728597 Jy ! Component: 2000 - total flux cleaned = -0.00742802 Jy ! Total flux subtracted in 2048 components = -0.00745168 Jy ! Clean residual min=-0.001322 max=0.001514 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.11828 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 194 components and 0.11828 Jy ![Exited script file: muppet] wmap "J2219-0051_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8349 x 2.14 at -2.305 degrees (North through East) ! Clean map min=-0.0023195 max=0.10771 Jy/beam ! Writing clean map to FITS file: J2219-0051_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044069 device "J2219-0051_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J2219-0051_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22744 1.22744 2.45487 4.90975 9.81949 19.639 39.278 78.5559 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8349 x 2.14 at -2.305 degrees (North through East) ! Clean map min=-0.0023195 max=0.10771 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2219-0051_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J2219-0051_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2219-0051_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 20:06:24 2008