! Started logfile: J2158-1501_S_2007_01_11_yyk_uvs.log on Mon Jun 16 20:04:39 2008 obs J2158-1501_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J2158-1501_S_2007_01_11_yyk_uve.fits ! AN table 1: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J2158-1501 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2158-1501_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.60671 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.828 mas, bpa=-3.474 degrees ! Estimated noise=2.6565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.19641 Jy ! Component: 100 - total flux cleaned = 2.75919 Jy ! Total flux subtracted in 100 components = 2.75919 Jy ! Clean residual min=-0.073540 max=0.161372 Jy/beam ! Clean residual mean=-0.000894 rms=0.031504 Jy/beam ! Combined flux in latest and established models = 2.75919 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.75919 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.352858Jy sigma=4.648252 ! Fit after self-cal, rms=0.350899Jy sigma=4.620106 ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.828 mas, bpa=-3.474 degrees ! Estimated noise=2.6565 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.548 mas, bpa=-4.473 degrees ! Estimated noise=1.94924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.245152 Jy ! Component: 100 - total flux cleaned = 0.3302 Jy ! Component: 150 - total flux cleaned = 0.362007 Jy ! Component: 200 - total flux cleaned = 0.374756 Jy ! Total flux subtracted in 200 components = 0.374756 Jy ! Clean residual min=-0.039275 max=0.033010 Jy/beam ! Clean residual mean=-0.000778 rms=0.009807 Jy/beam ! Combined flux in latest and established models = 3.13395 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 3.13395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231386Jy sigma=2.653450 ! Fit after self-cal, rms=0.231470Jy sigma=2.652623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.548 at -4.473 degrees (North through East) ! Clean map min=-0.038214 max=2.4768 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02538 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.92 KP 0.96 ! LA 1.04 MK 0.99 OV 0.97 PT 1.02 ! SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991028 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 0.98 ! LA 1.01 MK 1.04 OV 1.04 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.97732 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.99 KP 0.99 ! LA 1.00 MK 1.04 OV 1.04 PT 1.04 ! SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00423 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.99 KP 0.92 ! LA 1.01 MK 1.01 OV 0.98 PT 0.95 ! SC 1.07 ! ! ! Fit before self-cal, rms=0.231470Jy sigma=2.652623 ! Fit after self-cal, rms=0.200575Jy sigma=2.168145 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200575Jy sigma=2.168145 ! Fit after self-cal, rms=0.200561Jy sigma=2.168139 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.617 mas, bpa=-4.171 degrees ! Estimated noise=1.94836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00758845 Jy ! Component: 100 - total flux cleaned = -0.00793018 Jy ! Component: 150 - total flux cleaned = -0.00788909 Jy ! Component: 200 - total flux cleaned = -0.00760744 Jy ! Total flux subtracted in 200 components = -0.00760744 Jy ! Clean residual min=-0.015211 max=0.015602 Jy/beam ! Clean residual mean=0.000125 rms=0.003841 Jy/beam ! Combined flux in latest and established models = 3.12634 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 3.12634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199212Jy sigma=2.152653 ! Fit after self-cal, rms=0.199373Jy sigma=2.152428 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199373Jy sigma=2.152428 ! Fit after self-cal, rms=0.156505Jy sigma=1.748552 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178625 Jy ! Component: 100 - total flux cleaned = 0.0020114 Jy ! Component: 150 - total flux cleaned = 0.00200888 Jy ! Component: 200 - total flux cleaned = 0.0020188 Jy ! Total flux subtracted in 200 components = 0.0020188 Jy ! Clean residual min=-0.014400 max=0.014514 Jy/beam ! Clean residual mean=0.000129 rms=0.003723 Jy/beam ! Combined flux in latest and established models = 3.12836 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 3.12836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155898Jy sigma=1.742246 ! Fit after self-cal, rms=0.146759Jy sigma=1.696428 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.189 x 8.617 at -4.171 degrees (North through East) ! Clean map min=-0.013731 max=2.4833 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146759Jy sigma=1.696428 ! Fit after self-cal, rms=0.113484Jy sigma=0.998995 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113484Jy sigma=0.998995 ! Fit after self-cal, rms=0.110882Jy sigma=0.988701 ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.646 mas, bpa=-4.133 degrees ! Estimated noise=1.94871 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191423 Jy ! Component: 100 - total flux cleaned = -0.00168662 Jy ! Component: 150 - total flux cleaned = -0.00169535 Jy ! Component: 200 - total flux cleaned = -0.00169626 Jy ! Total flux subtracted in 200 components = -0.00169626 Jy ! Clean residual min=-0.009570 max=0.008900 Jy/beam ! Clean residual mean=0.000032 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 3.12666 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 3.12666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110146Jy sigma=0.977150 ! Fit after self-cal, rms=0.109476Jy sigma=0.975152 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109476Jy sigma=0.975152 ! Fit after self-cal, rms=0.107838Jy sigma=0.942499 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107838Jy sigma=0.942499 ! Fit after self-cal, rms=0.107711Jy sigma=0.942239 ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.658 mas, bpa=-4.135 degrees ! Estimated noise=1.95003 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000472669 Jy ! Component: 100 - total flux cleaned = -0.000477336 Jy ! Component: 150 - total flux cleaned = -0.000636415 Jy ! Component: 200 - total flux cleaned = -0.000646852 Jy ! Total flux subtracted in 200 components = -0.000646852 Jy ! Clean residual min=-0.008873 max=0.008284 Jy/beam ! Clean residual mean=0.000019 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 3.12602 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 3.12602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107213Jy sigma=0.934754 ! Fit after self-cal, rms=0.107171Jy sigma=0.934492 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.033 mas, bmaj=17.55 mas, bpa=9.065 degrees ! Estimated noise=2.46097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055168 Jy ! Component: 100 - total flux cleaned = -0.000773809 Jy ! Component: 150 - total flux cleaned = -0.000966597 Jy ! Component: 200 - total flux cleaned = -0.00112785 Jy ! Total flux subtracted in 200 components = -0.00112785 Jy ! Clean residual min=-0.008371 max=0.010415 Jy/beam ! Clean residual mean=0.000034 rms=0.003214 Jy/beam ! Combined flux in latest and established models = 3.12489 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 62 components and 3.12489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107208Jy sigma=0.934432 ! Fit after self-cal, rms=0.107070Jy sigma=0.933532 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.878 mas, bpa=-3.427 degrees ! Estimated noise=2.64852 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.18685 Jy ! Component: 100 - total flux cleaned = 2.73619 Jy ! Component: 150 - total flux cleaned = 2.94644 Jy ! Component: 200 - total flux cleaned = 3.03898 Jy ! Total flux subtracted in 200 components = 3.03898 Jy ! Clean residual min=-0.017120 max=0.030486 Jy/beam ! Clean residual mean=0.000026 rms=0.006624 Jy/beam ! Combined flux in latest and established models = 3.03898 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 3.03898 Jy ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.658 mas, bpa=-4.135 degrees ! Estimated noise=1.95003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.052357 Jy ! Component: 100 - total flux cleaned = 0.0722085 Jy ! Component: 150 - total flux cleaned = 0.0803636 Jy ! Component: 200 - total flux cleaned = 0.0831927 Jy ! Total flux subtracted in 200 components = 0.0831927 Jy ! Clean residual min=-0.008378 max=0.010513 Jy/beam ! Clean residual mean=0.000018 rms=0.002493 Jy/beam ! Combined flux in latest and established models = 3.12217 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 68 components and 3.12217 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.033 mas, bmaj=17.55 mas, bpa=9.065 degrees ! Estimated noise=2.46097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749521 Jy ! Component: 100 - total flux cleaned = 0.000756558 Jy ! Component: 150 - total flux cleaned = 0.000836214 Jy ! Component: 200 - total flux cleaned = 0.000906381 Jy ! Total flux subtracted in 200 components = 0.000906381 Jy ! Clean residual min=-0.008725 max=0.011803 Jy/beam ! Clean residual mean=0.000036 rms=0.003342 Jy/beam ! Combined flux in latest and established models = 3.12308 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 75 components and 3.12308 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.658 mas, bpa=-4.135 degrees ! Estimated noise=1.95003 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.98018e-05 Jy ! Component: 100 - total flux cleaned = 0.000264175 Jy ! Component: 150 - total flux cleaned = 0.000451538 Jy ! Component: 200 - total flux cleaned = 0.000620068 Jy ! Total flux subtracted in 200 components = 0.000620068 Jy ! Clean residual min=-0.008215 max=0.009956 Jy/beam ! Clean residual mean=0.000018 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 3.1237 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 3.1237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106884Jy sigma=0.929604 ! Fit after self-cal, rms=0.106782Jy sigma=0.928885 wmodel J2158-1501_S_2007_01_11_yyk\_map.mod ! Writing 85 model components to file: J2158-1501_S_2007_01_11_yyk_map.mod wobs J2158-1501_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J2158-1501_S_2007_01_11_yyk_uvs.fits wwins J2158-1501_S_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J2158-1501_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244189 Jy ! Component: 100 - total flux cleaned = 0.00390499 Jy ! Component: 150 - total flux cleaned = 0.00402914 Jy ! Component: 200 - total flux cleaned = 0.00392029 Jy ! Component: 250 - total flux cleaned = 0.00349534 Jy ! Component: 300 - total flux cleaned = 0.0029867 Jy ! Component: 350 - total flux cleaned = 0.00221646 Jy ! Component: 400 - total flux cleaned = 0.00167018 Jy ! Component: 450 - total flux cleaned = 0.00131841 Jy ! Component: 500 - total flux cleaned = 0.000812754 Jy ! Component: 550 - total flux cleaned = 0.000171463 Jy ! Component: 600 - total flux cleaned = -0.000289052 Jy ! Component: 650 - total flux cleaned = -0.000586582 Jy ! Component: 700 - total flux cleaned = -0.00115306 Jy ! Component: 750 - total flux cleaned = -0.00142432 Jy ! Component: 800 - total flux cleaned = -0.00188678 Jy ! Component: 850 - total flux cleaned = -0.00220456 Jy ! Component: 900 - total flux cleaned = -0.00239085 Jy ! Component: 950 - total flux cleaned = -0.00299156 Jy ! Component: 1000 - total flux cleaned = -0.00339667 Jy ! Component: 1050 - total flux cleaned = -0.00345392 Jy ! Component: 1100 - total flux cleaned = -0.00372939 Jy ! Component: 1150 - total flux cleaned = -0.00399756 Jy ! Component: 1200 - total flux cleaned = -0.00420612 Jy ! Component: 1250 - total flux cleaned = -0.00430939 Jy ! Component: 1300 - total flux cleaned = -0.00455889 Jy ! Component: 1350 - total flux cleaned = -0.00450955 Jy ! Component: 1400 - total flux cleaned = -0.00465438 Jy ! Component: 1450 - total flux cleaned = -0.00474859 Jy ! Component: 1500 - total flux cleaned = -0.00474976 Jy ! Component: 1550 - total flux cleaned = -0.00497619 Jy ! Component: 1600 - total flux cleaned = -0.00515323 Jy ! Component: 1650 - total flux cleaned = -0.00519514 Jy ! Component: 1700 - total flux cleaned = -0.00515136 Jy ! Component: 1750 - total flux cleaned = -0.00502524 Jy ! Component: 1800 - total flux cleaned = -0.00498491 Jy ! Component: 1850 - total flux cleaned = -0.00522669 Jy ! Component: 1900 - total flux cleaned = -0.00514649 Jy ! Component: 1950 - total flux cleaned = -0.0051469 Jy ! Component: 2000 - total flux cleaned = -0.00518515 Jy ! Total flux subtracted in 2048 components = -0.00518511 Jy ! Clean residual min=-0.002114 max=0.002505 Jy/beam ! Clean residual mean=0.000017 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 3.11851 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 213 components and 3.11852 Jy ![Exited script file: muppet] wmap "J2158-1501_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 8.658 at -4.135 degrees (North through East) ! Clean map min=-0.0046412 max=2.4869 Jy/beam ! Writing clean map to FITS file: J2158-1501_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.48693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000750122 device "J2158-1501_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J2158-1501_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0904877 0.0904877 0.180975 0.361951 0.723902 1.4478 2.89561 5.79122 11.5824 23.1649 46.3297 92.6594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.486 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 8.658 at -4.135 degrees (North through East) ! Clean map min=-0.0046412 max=2.4869 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2158-1501_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J2158-1501_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2158-1501_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 20:04:45 2008