! Started logfile: J2150-2812_S_2007_01_11_yyk_uvs.log on Mon Jun 16 20:04:07 2008 obs J2150-2812_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J2150-2812_S_2007_01_11_yyk_uve.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2150-2812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 2016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2150-2812_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.183361 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.295 mas, bmaj=6.325 mas, bpa=-1.256 degrees ! Estimated noise=1.72138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124979 Jy ! Component: 100 - total flux cleaned = 0.150283 Jy ! Total flux subtracted in 100 components = 0.150283 Jy ! Clean residual min=-0.009757 max=0.019556 Jy/beam ! Clean residual mean=-0.000187 rms=0.003390 Jy/beam ! Combined flux in latest and established models = 0.150283 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.150283 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.098789Jy sigma=1.261518 ! Fit after self-cal, rms=0.090080Jy sigma=1.202495 ! Inverting map and beam ! Estimated beam: bmin=2.295 mas, bmaj=6.325 mas, bpa=-1.256 degrees ! Estimated noise=1.72138 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.904 mas, bpa=-1.681 degrees ! Estimated noise=1.11123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.029501 Jy ! Component: 100 - total flux cleaned = 0.0403494 Jy ! Component: 150 - total flux cleaned = 0.0448461 Jy ! Component: 200 - total flux cleaned = 0.0458769 Jy ! Total flux subtracted in 200 components = 0.0458769 Jy ! Clean residual min=-0.007972 max=0.013275 Jy/beam ! Clean residual mean=-0.000109 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.19616 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.19616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085260Jy sigma=1.101671 ! Fit after self-cal, rms=0.085143Jy sigma=1.100905 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 7.904 at -1.681 degrees (North through East) ! Clean map min=-0.0076703 max=0.14971 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.085143Jy sigma=1.100905 ! Fit after self-cal, rms=0.085143Jy sigma=1.100905 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085143Jy sigma=1.100905 ! Fit after self-cal, rms=0.085143Jy sigma=1.100905 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.904 mas, bpa=-1.681 degrees ! Estimated noise=1.11123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158957 Jy ! Component: 100 - total flux cleaned = 0.0208389 Jy ! Component: 150 - total flux cleaned = 0.02166 Jy ! Component: 200 - total flux cleaned = 0.0221088 Jy ! Total flux subtracted in 200 components = 0.0221088 Jy ! Clean residual min=-0.005993 max=0.007606 Jy/beam ! Clean residual mean=-0.000174 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.218269 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 0.218269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083524Jy sigma=1.069274 ! Fit after self-cal, rms=0.083299Jy sigma=1.066179 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083299Jy sigma=1.066179 ! Fit after self-cal, rms=0.076259Jy sigma=0.986094 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450245 Jy ! Component: 100 - total flux cleaned = 0.00525552 Jy ! Component: 150 - total flux cleaned = 0.00568139 Jy ! Component: 200 - total flux cleaned = 0.00590657 Jy ! Total flux subtracted in 200 components = 0.00590657 Jy ! Clean residual min=-0.005440 max=0.005085 Jy/beam ! Clean residual mean=-0.000186 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.224175 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 94 components and 0.224175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076026Jy sigma=0.981690 ! Fit after self-cal, rms=0.075802Jy sigma=0.978138 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 7.904 at -1.681 degrees (North through East) ! Clean map min=-0.005214 max=0.15171 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075802Jy sigma=0.978138 ! Fit after self-cal, rms=0.074701Jy sigma=0.967843 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074701Jy sigma=0.967843 ! Fit after self-cal, rms=0.074709Jy sigma=0.967617 ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.948 mas, bpa=-1.317 degrees ! Estimated noise=1.09476 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138171 Jy ! Component: 100 - total flux cleaned = -0.00144806 Jy ! Component: 150 - total flux cleaned = -0.00151011 Jy ! Component: 200 - total flux cleaned = -0.00162314 Jy ! Total flux subtracted in 200 components = -0.00162314 Jy ! Clean residual min=-0.004905 max=0.003679 Jy/beam ! Clean residual mean=-0.000143 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.222552 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 115 components and 0.222552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074539Jy sigma=0.965545 ! Fit after self-cal, rms=0.074518Jy sigma=0.965325 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074518Jy sigma=0.965325 ! Fit after self-cal, rms=0.074082Jy sigma=0.953565 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074082Jy sigma=0.953565 ! Fit after self-cal, rms=0.074095Jy sigma=0.953449 ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=7.982 mas, bpa=-1.32 degrees ! Estimated noise=1.08596 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000991261 Jy ! Component: 100 - total flux cleaned = -0.000989637 Jy ! Component: 150 - total flux cleaned = -0.00104242 Jy ! Component: 200 - total flux cleaned = -0.00113711 Jy ! Total flux subtracted in 200 components = -0.00113711 Jy ! Clean residual min=-0.004700 max=0.003899 Jy/beam ! Clean residual mean=-0.000139 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.221415 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.221415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073984Jy sigma=0.952207 ! Fit after self-cal, rms=0.073959Jy sigma=0.952026 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.4 mas, bmaj=22.6 mas, bpa=7.237 degrees ! Estimated noise=1.41695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891709 Jy ! Component: 100 - total flux cleaned = 0.000669792 Jy ! Component: 150 - total flux cleaned = 0.000482859 Jy ! Component: 200 - total flux cleaned = 0.000316546 Jy ! Total flux subtracted in 200 components = 0.000316546 Jy ! Clean residual min=-0.004037 max=0.003227 Jy/beam ! Clean residual mean=-0.000260 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.221732 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 0.221732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073959Jy sigma=0.951876 ! Fit after self-cal, rms=0.073936Jy sigma=0.951588 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.33 mas, bpa=-0.8667 degrees ! Estimated noise=1.68699 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.13195 Jy ! Component: 100 - total flux cleaned = 0.156294 Jy ! Component: 150 - total flux cleaned = 0.170712 Jy ! Component: 200 - total flux cleaned = 0.181243 Jy ! Total flux subtracted in 200 components = 0.181243 Jy ! Clean residual min=-0.006771 max=0.008850 Jy/beam ! Clean residual mean=-0.000132 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.181243 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.181243 Jy ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=7.982 mas, bpa=-1.32 degrees ! Estimated noise=1.08596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.018212 Jy ! Component: 100 - total flux cleaned = 0.0271759 Jy ! Component: 150 - total flux cleaned = 0.0326589 Jy ! Component: 200 - total flux cleaned = 0.03619 Jy ! Total flux subtracted in 200 components = 0.03619 Jy ! Clean residual min=-0.004761 max=0.004622 Jy/beam ! Clean residual mean=-0.000138 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.217433 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 99 components and 0.217433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.4 mas, bmaj=22.6 mas, bpa=7.237 degrees ! Estimated noise=1.41695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365728 Jy ! Component: 100 - total flux cleaned = 0.00431703 Jy ! Component: 150 - total flux cleaned = 0.00467633 Jy ! Component: 200 - total flux cleaned = 0.00472839 Jy ! Total flux subtracted in 200 components = 0.00472839 Jy ! Clean residual min=-0.003910 max=0.003326 Jy/beam ! Clean residual mean=-0.000262 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.222161 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 0.222161 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=7.982 mas, bpa=-1.32 degrees ! Estimated noise=1.08596 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218399 Jy ! Component: 100 - total flux cleaned = -0.000109181 Jy ! Component: 150 - total flux cleaned = -6.48338e-05 Jy ! Component: 200 - total flux cleaned = -2.48304e-05 Jy ! Total flux subtracted in 200 components = -2.48304e-05 Jy ! Clean residual min=-0.004401 max=0.003731 Jy/beam ! Clean residual mean=-0.000137 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.222137 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 0.222136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073317Jy sigma=0.947116 ! Fit after self-cal, rms=0.073257Jy sigma=0.945999 wmodel J2150-2812_S_2007_01_11_yyk\_map.mod ! Writing 136 model components to file: J2150-2812_S_2007_01_11_yyk_map.mod wobs J2150-2812_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J2150-2812_S_2007_01_11_yyk_uvs.fits wwins J2150-2812_S_2007_01_11_yyk\_map.win ! wwins: Wrote 3 windows to J2150-2812_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178281 Jy ! Component: 100 - total flux cleaned = -0.00178845 Jy ! Component: 150 - total flux cleaned = -0.00156484 Jy ! Component: 200 - total flux cleaned = -0.00172353 Jy ! Component: 250 - total flux cleaned = -0.00187525 Jy ! Component: 300 - total flux cleaned = -0.00182835 Jy ! Component: 350 - total flux cleaned = -0.00201496 Jy ! Component: 400 - total flux cleaned = -0.00201475 Jy ! Component: 450 - total flux cleaned = -0.00227629 Jy ! Component: 500 - total flux cleaned = -0.00244636 Jy ! Component: 550 - total flux cleaned = -0.00286056 Jy ! Component: 600 - total flux cleaned = -0.00314254 Jy ! Component: 650 - total flux cleaned = -0.00353737 Jy ! Component: 700 - total flux cleaned = -0.00396273 Jy ! Component: 750 - total flux cleaned = -0.00441647 Jy ! Component: 800 - total flux cleaned = -0.0047872 Jy ! Component: 850 - total flux cleaned = -0.0051156 Jy ! Component: 900 - total flux cleaned = -0.00561614 Jy ! Component: 950 - total flux cleaned = -0.00603699 Jy ! Component: 1000 - total flux cleaned = -0.00651888 Jy ! Component: 1050 - total flux cleaned = -0.00689084 Jy ! Component: 1100 - total flux cleaned = -0.00719051 Jy ! Component: 1150 - total flux cleaned = -0.00761616 Jy ! Component: 1200 - total flux cleaned = -0.00790579 Jy ! Component: 1250 - total flux cleaned = -0.00819149 Jy ! Component: 1300 - total flux cleaned = -0.0085044 Jy ! Component: 1350 - total flux cleaned = -0.00875123 Jy ! Component: 1400 - total flux cleaned = -0.00911766 Jy ! Component: 1450 - total flux cleaned = -0.00938889 Jy ! Component: 1500 - total flux cleaned = -0.00962735 Jy ! Component: 1550 - total flux cleaned = -0.00995062 Jy ! Component: 1600 - total flux cleaned = -0.0101543 Jy ! Component: 1650 - total flux cleaned = -0.0104418 Jy ! Component: 1700 - total flux cleaned = -0.0107261 Jy ! Component: 1750 - total flux cleaned = -0.010895 Jy ! Component: 1800 - total flux cleaned = -0.0112565 Jy ! Component: 1850 - total flux cleaned = -0.0115587 Jy ! Component: 1900 - total flux cleaned = -0.0117493 Jy ! Component: 1950 - total flux cleaned = -0.0120995 Jy ! Component: 2000 - total flux cleaned = -0.0123128 Jy ! Total flux subtracted in 2048 components = -0.0126297 Jy ! Clean residual min=-0.001462 max=0.001517 Jy/beam ! Clean residual mean=-0.000080 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.209507 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 276 components and 0.209507 Jy ![Exited script file: muppet] wmap "J2150-2812_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.055 x 7.982 at -1.32 degrees (North through East) ! Clean map min=-0.003904 max=0.15023 Jy/beam ! Writing clean map to FITS file: J2150-2812_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.150229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000529539 device "J2150-2812_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J2150-2812_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05747 1.05747 2.11493 4.22987 8.45974 16.9195 33.8389 67.6779 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.055 x 7.982 at -1.32 degrees (North through East) ! Clean map min=-0.003904 max=0.15023 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2150-2812_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J2150-2812_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2150-2812_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 20:04:13 2008