! Started logfile: J2000-1748_X_2007_01_11_yyk_uvs.log on Mon Jun 16 20:00:41 2008 obs J2000-1748_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J2000-1748_X_2007_01_11_yyk_uve.fits ! AN table 1: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.805556 visibilities/baseline/integration-bin. ! Found source: J2000-1748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2000-1748_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.03805 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.711 mas, bmaj=1.948 mas, bpa=11.06 degrees ! Estimated noise=4.07484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.68013 Jy ! Component: 100 - total flux cleaned = 1.9781 Jy ! Total flux subtracted in 100 components = 1.9781 Jy ! Clean residual min=-0.083251 max=0.155132 Jy/beam ! Clean residual mean=0.000276 rms=0.029873 Jy/beam ! Combined flux in latest and established models = 1.9781 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.9781 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.606105Jy sigma=5.554969 ! Fit after self-cal, rms=0.605688Jy sigma=5.512655 ! Inverting map and beam ! Estimated beam: bmin=0.711 mas, bmaj=1.948 mas, bpa=11.06 degrees ! Estimated noise=4.07484 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9605 mas, bmaj=2.432 mas, bpa=12.46 degrees ! Estimated noise=2.87767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183352 Jy ! Component: 100 - total flux cleaned = 0.255971 Jy ! Component: 150 - total flux cleaned = 0.279003 Jy ! Component: 200 - total flux cleaned = 0.28403 Jy ! Total flux subtracted in 200 components = 0.28403 Jy ! Clean residual min=-0.068294 max=0.083471 Jy/beam ! Clean residual mean=-0.000405 rms=0.022148 Jy/beam ! Combined flux in latest and established models = 2.26213 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 2.26213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586505Jy sigma=5.076511 ! Fit after self-cal, rms=0.584802Jy sigma=5.074462 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9605 x 2.432 at 12.46 degrees (North through East) ! Clean map min=-0.065756 max=1.9257 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.982087 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.30 KP 0.99 ! LA 1.00 MK 0.97 OV 0.95 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994676 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.29 KP 0.92 ! LA 0.95 MK 0.94 OV 0.95 PT 1.05 ! SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991965 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.18 KP 0.85 ! LA 0.97 MK 0.98 OV 1.00 PT 1.06 ! SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.975996 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.20 KP 0.88 ! LA 0.96 MK 1.00 OV 0.97 PT 1.11 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.584802Jy sigma=5.074462 ! Fit after self-cal, rms=0.557707Jy sigma=4.647968 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.557707Jy sigma=4.647968 ! Fit after self-cal, rms=0.557664Jy sigma=4.647084 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9669 mas, bmaj=2.441 mas, bpa=12.62 degrees ! Estimated noise=2.79206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0617224 Jy ! Component: 100 - total flux cleaned = -0.0834709 Jy ! Component: 150 - total flux cleaned = -0.0886977 Jy ! Component: 200 - total flux cleaned = -0.0895361 Jy ! Total flux subtracted in 200 components = -0.0895361 Jy ! Clean residual min=-0.020265 max=0.022253 Jy/beam ! Clean residual mean=0.000243 rms=0.006571 Jy/beam ! Combined flux in latest and established models = 2.17259 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 2.17259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553552Jy sigma=4.589241 ! Fit after self-cal, rms=0.552145Jy sigma=4.587589 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552145Jy sigma=4.587589 ! Fit after self-cal, rms=0.195448Jy sigma=1.664114 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257431 Jy ! Component: 100 - total flux cleaned = 0.022756 Jy ! Component: 150 - total flux cleaned = 0.0211146 Jy ! Component: 200 - total flux cleaned = 0.0189804 Jy ! Total flux subtracted in 200 components = 0.0189804 Jy ! Clean residual min=-0.024404 max=0.017530 Jy/beam ! Clean residual mean=0.000116 rms=0.005058 Jy/beam ! Combined flux in latest and established models = 2.19157 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 2.19157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182729Jy sigma=1.547815 ! Fit after self-cal, rms=0.138612Jy sigma=1.174602 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9669 x 2.441 at 12.62 degrees (North through East) ! Clean map min=-0.02319 max=1.963 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138612Jy sigma=1.174602 ! Fit after self-cal, rms=0.133059Jy sigma=1.106025 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133059Jy sigma=1.106025 ! Fit after self-cal, rms=0.130965Jy sigma=1.078019 ! Inverting map and beam ! Estimated beam: bmin=0.9622 mas, bmaj=2.422 mas, bpa=11.98 degrees ! Estimated noise=2.77906 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109327 Jy ! Component: 100 - total flux cleaned = -0.0119586 Jy ! Component: 150 - total flux cleaned = -0.0128121 Jy ! Component: 200 - total flux cleaned = -0.0131876 Jy ! Total flux subtracted in 200 components = -0.0131876 Jy ! Clean residual min=-0.019374 max=0.013341 Jy/beam ! Clean residual mean=0.000071 rms=0.004123 Jy/beam ! Combined flux in latest and established models = 2.17838 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 2.17838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125733Jy sigma=1.033820 ! Fit after self-cal, rms=0.125281Jy sigma=1.026381 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125281Jy sigma=1.026381 ! Fit after self-cal, rms=0.125296Jy sigma=1.013732 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125296Jy sigma=1.013732 ! Fit after self-cal, rms=0.125376Jy sigma=1.013573 ! Inverting map and beam ! Estimated beam: bmin=0.9617 mas, bmaj=2.42 mas, bpa=11.77 degrees ! Estimated noise=2.77463 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00790122 Jy ! Component: 100 - total flux cleaned = -0.00752455 Jy ! Component: 150 - total flux cleaned = -0.00778881 Jy ! Component: 200 - total flux cleaned = -0.00825141 Jy ! Total flux subtracted in 200 components = -0.00825141 Jy ! Clean residual min=-0.015249 max=0.012302 Jy/beam ! Clean residual mean=0.000049 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 2.17013 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 2.17013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122644Jy sigma=0.993411 ! Fit after self-cal, rms=0.122420Jy sigma=0.989783 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.842 mas, bpa=21.88 degrees ! Estimated noise=3.34804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210811 Jy ! Component: 100 - total flux cleaned = -0.0021552 Jy ! Component: 150 - total flux cleaned = -0.00217371 Jy ! Component: 200 - total flux cleaned = -0.00217184 Jy ! Total flux subtracted in 200 components = -0.00217184 Jy ! Clean residual min=-0.012734 max=0.014146 Jy/beam ! Clean residual mean=0.000109 rms=0.004260 Jy/beam ! Combined flux in latest and established models = 2.16796 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 2.16796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121362Jy sigma=0.986116 ! Fit after self-cal, rms=0.121183Jy sigma=0.982341 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7087 mas, bmaj=1.94 mas, bpa=11.1 degrees ! Estimated noise=3.99245 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.69932 Jy ! Component: 100 - total flux cleaned = 1.96413 Jy ! Component: 150 - total flux cleaned = 2.0578 Jy ! Component: 200 - total flux cleaned = 2.10446 Jy ! Total flux subtracted in 200 components = 2.10446 Jy ! Clean residual min=-0.021005 max=0.023727 Jy/beam ! Clean residual mean=0.000146 rms=0.005851 Jy/beam ! Combined flux in latest and established models = 2.10446 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.10446 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9617 mas, bmaj=2.42 mas, bpa=11.77 degrees ! Estimated noise=2.77463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406685 Jy ! Component: 100 - total flux cleaned = 0.0549038 Jy ! Component: 150 - total flux cleaned = 0.0578703 Jy ! Component: 200 - total flux cleaned = 0.0599709 Jy ! Total flux subtracted in 200 components = 0.0599709 Jy ! Clean residual min=-0.010508 max=0.013011 Jy/beam ! Clean residual mean=0.000088 rms=0.003241 Jy/beam ! Combined flux in latest and established models = 2.16443 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 53 components and 2.16443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.842 mas, bpa=21.88 degrees ! Estimated noise=3.34804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527343 Jy ! Component: 100 - total flux cleaned = 0.00631996 Jy ! Component: 150 - total flux cleaned = 0.00718294 Jy ! Component: 200 - total flux cleaned = 0.00790566 Jy ! Total flux subtracted in 200 components = 0.00790566 Jy ! Clean residual min=-0.010300 max=0.012334 Jy/beam ! Clean residual mean=0.000049 rms=0.003809 Jy/beam ! Combined flux in latest and established models = 2.17234 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 2.17234 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9617 mas, bmaj=2.42 mas, bpa=11.77 degrees ! Estimated noise=2.77463 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854171 Jy ! Component: 100 - total flux cleaned = -0.000659013 Jy ! Component: 150 - total flux cleaned = -0.000270126 Jy ! Component: 200 - total flux cleaned = -8.96664e-05 Jy ! Total flux subtracted in 200 components = -8.96664e-05 Jy ! Clean residual min=-0.009530 max=0.011955 Jy/beam ! Clean residual mean=0.000030 rms=0.002910 Jy/beam ! Combined flux in latest and established models = 2.17225 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 2.17225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118012Jy sigma=0.952419 ! Fit after self-cal, rms=0.117840Jy sigma=0.949606 wmodel J2000-1748_X_2007_01_11_yyk\_map.mod ! Writing 75 model components to file: J2000-1748_X_2007_01_11_yyk_map.mod wobs J2000-1748_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J2000-1748_X_2007_01_11_yyk_uvs.fits wwins J2000-1748_X_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J2000-1748_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040983 Jy ! Component: 100 - total flux cleaned = 0.00593489 Jy ! Component: 150 - total flux cleaned = 0.00667925 Jy ! Component: 200 - total flux cleaned = 0.00737023 Jy ! Component: 250 - total flux cleaned = 0.00825191 Jy ! Component: 300 - total flux cleaned = 0.00895737 Jy ! Component: 350 - total flux cleaned = 0.00984112 Jy ! Component: 400 - total flux cleaned = 0.0105776 Jy ! Component: 450 - total flux cleaned = 0.0108768 Jy ! Component: 500 - total flux cleaned = 0.0109699 Jy ! Component: 550 - total flux cleaned = 0.0114224 Jy ! Component: 600 - total flux cleaned = 0.0117691 Jy ! Component: 650 - total flux cleaned = 0.0121857 Jy ! Component: 700 - total flux cleaned = 0.0125864 Jy ! Component: 750 - total flux cleaned = 0.0129718 Jy ! Component: 800 - total flux cleaned = 0.013269 Jy ! Component: 850 - total flux cleaned = 0.0134844 Jy ! Component: 900 - total flux cleaned = 0.0136948 Jy ! Component: 950 - total flux cleaned = 0.0138305 Jy ! Component: 1000 - total flux cleaned = 0.0138302 Jy ! Component: 1050 - total flux cleaned = 0.0137665 Jy ! Component: 1100 - total flux cleaned = 0.0139561 Jy ! Component: 1150 - total flux cleaned = 0.0138942 Jy ! Component: 1200 - total flux cleaned = 0.0140739 Jy ! Component: 1250 - total flux cleaned = 0.0141314 Jy ! Component: 1300 - total flux cleaned = 0.0141295 Jy ! Component: 1350 - total flux cleaned = 0.0142957 Jy ! Component: 1400 - total flux cleaned = 0.0142953 Jy ! Component: 1450 - total flux cleaned = 0.0147228 Jy ! Component: 1500 - total flux cleaned = 0.015142 Jy ! Component: 1550 - total flux cleaned = 0.0154505 Jy ! Component: 1600 - total flux cleaned = 0.015704 Jy ! Component: 1650 - total flux cleaned = 0.016005 Jy ! Component: 1700 - total flux cleaned = 0.0162034 Jy ! Component: 1750 - total flux cleaned = 0.0164952 Jy ! Component: 1800 - total flux cleaned = 0.0166387 Jy ! Component: 1850 - total flux cleaned = 0.0164972 Jy ! Component: 1900 - total flux cleaned = 0.016684 Jy ! Component: 1950 - total flux cleaned = 0.0168681 Jy ! Component: 2000 - total flux cleaned = 0.017051 Jy ! Total flux subtracted in 2048 components = 0.0172318 Jy ! Clean residual min=-0.003017 max=0.002655 Jy/beam ! Clean residual mean=0.000006 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 2.18948 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 198 components and 2.18948 Jy ![Exited script file: muppet] wmap "J2000-1748_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9617 x 2.42 at 11.77 degrees (North through East) ! Clean map min=-0.011108 max=1.9672 Jy/beam ! Writing clean map to FITS file: J2000-1748_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.96716 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00082354 device "J2000-1748_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J2000-1748_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125593 0.125593 0.251187 0.502374 1.00475 2.0095 4.01899 8.03798 16.076 32.1519 64.3038 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.967 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9617 x 2.42 at 11.77 degrees (North through East) ! Clean map min=-0.011108 max=1.9672 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2000-1748_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J2000-1748_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2000-1748_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 20:00:47 2008