! Started logfile: J1935-1602_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:59:24 2008 obs J1935-1602_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1935-1602_S_2007_01_11_yyk_uve.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.916667 visibilities/baseline/integration-bin. ! Found source: J1935-1602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2250 lines of history. ! ! Reading 1980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1935-1602_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.195048 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=7.912 mas, bpa=-9.147 degrees ! Estimated noise=1.83954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -1). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111803 Jy ! Component: 100 - total flux cleaned = 0.158188 Jy ! Total flux subtracted in 100 components = 0.158188 Jy ! Clean residual min=-0.016703 max=0.028364 Jy/beam ! Clean residual mean=0.000118 rms=0.005843 Jy/beam ! Combined flux in latest and established models = 0.158188 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.158188 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.111185Jy sigma=1.647164 ! Fit after self-cal, rms=0.109968Jy sigma=1.622456 ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=7.914 mas, bpa=-9.179 degrees ! Estimated noise=1.83802 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=12 mas, bpa=-10.17 degrees ! Estimated noise=1.11435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451556 Jy ! Component: 100 - total flux cleaned = 0.0637921 Jy ! Component: 150 - total flux cleaned = 0.0704354 Jy ! Component: 200 - total flux cleaned = 0.0721044 Jy ! Total flux subtracted in 200 components = 0.0721044 Jy ! Clean residual min=-0.012864 max=0.034696 Jy/beam ! Clean residual mean=0.000322 rms=0.006714 Jy/beam ! Combined flux in latest and established models = 0.230292 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 76 components and 0.230292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098107Jy sigma=1.402094 ! Fit after self-cal, rms=0.098118Jy sigma=1.401023 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.903 x 12 at -10.17 degrees (North through East) ! Clean map min=-0.01332 max=0.1452 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.098118Jy sigma=1.401023 ! Fit after self-cal, rms=0.098118Jy sigma=1.401023 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098118Jy sigma=1.401023 ! Fit after self-cal, rms=0.098135Jy sigma=1.400942 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=12 mas, bpa=-10.17 degrees ! Estimated noise=1.11435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338163 Jy ! Component: 100 - total flux cleaned = 0.0390971 Jy ! Component: 150 - total flux cleaned = 0.040689 Jy ! Component: 200 - total flux cleaned = 0.0413653 Jy ! Total flux subtracted in 200 components = 0.0413653 Jy ! Clean residual min=-0.008617 max=0.019295 Jy/beam ! Clean residual mean=0.000062 rms=0.003987 Jy/beam ! Combined flux in latest and established models = 0.271657 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 106 components and 0.271657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090323Jy sigma=1.241823 ! Fit after self-cal, rms=0.089418Jy sigma=1.225043 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089418Jy sigma=1.225043 ! Fit after self-cal, rms=0.079384Jy sigma=1.067212 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120693 Jy ! Component: 100 - total flux cleaned = 0.0129076 Jy ! Component: 150 - total flux cleaned = 0.0124615 Jy ! Component: 200 - total flux cleaned = 0.0120752 Jy ! Total flux subtracted in 200 components = 0.0120752 Jy ! Clean residual min=-0.006909 max=0.014364 Jy/beam ! Clean residual mean=0.000007 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.283733 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 132 components and 0.283733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077097Jy sigma=1.032644 ! Fit after self-cal, rms=0.076209Jy sigma=1.018249 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.903 x 12 at -10.17 degrees (North through East) ! Clean map min=-0.0081363 max=0.14977 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076209Jy sigma=1.018249 ! Fit after self-cal, rms=0.073081Jy sigma=0.986718 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073081Jy sigma=0.986718 ! Fit after self-cal, rms=0.073028Jy sigma=0.985846 ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=11.88 mas, bpa=-10.15 degrees ! Estimated noise=1.10068 mJy/beam. ! Added new window around map position (15, 10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108056 Jy ! Component: 100 - total flux cleaned = 0.0146953 Jy ! Component: 150 - total flux cleaned = 0.01605 Jy ! Component: 200 - total flux cleaned = 0.0167274 Jy ! Total flux subtracted in 200 components = 0.0167274 Jy ! Clean residual min=-0.004070 max=0.004246 Jy/beam ! Clean residual mean=-0.000047 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.30046 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 162 components and 0.30046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071472Jy sigma=0.958391 ! Fit after self-cal, rms=0.071402Jy sigma=0.957284 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071402Jy sigma=0.957284 ! Fit after self-cal, rms=0.070623Jy sigma=0.945572 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070623Jy sigma=0.945572 ! Fit after self-cal, rms=0.070634Jy sigma=0.945435 ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=11.78 mas, bpa=-10.08 degrees ! Estimated noise=1.08514 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.78699e-05 Jy ! Component: 100 - total flux cleaned = -0.000936636 Jy ! Component: 150 - total flux cleaned = -0.0016361 Jy ! Component: 200 - total flux cleaned = -0.00218245 Jy ! Total flux subtracted in 200 components = -0.00218245 Jy ! Clean residual min=-0.003421 max=0.003514 Jy/beam ! Clean residual mean=-0.000073 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.298278 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.298278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070319Jy sigma=0.940682 ! Fit after self-cal, rms=0.070317Jy sigma=0.940576 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=18.92 mas, bpa=9.913 degrees ! Estimated noise=1.27494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184605 Jy ! Component: 100 - total flux cleaned = -0.00261171 Jy ! Component: 150 - total flux cleaned = -0.00321552 Jy ! Component: 200 - total flux cleaned = -0.00388342 Jy ! Total flux subtracted in 200 components = -0.00388342 Jy ! Clean residual min=-0.003358 max=0.003991 Jy/beam ! Clean residual mean=-0.000096 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.294394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 208 components and 0.294394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070275Jy sigma=0.939467 ! Fit after self-cal, rms=0.070274Jy sigma=0.939349 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=7.865 mas, bpa=-9.083 degrees ! Estimated noise=1.76124 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117159 Jy ! Component: 100 - total flux cleaned = 0.170804 Jy ! Component: 150 - total flux cleaned = 0.20165 Jy ! Component: 200 - total flux cleaned = 0.221902 Jy ! Total flux subtracted in 200 components = 0.221902 Jy ! Clean residual min=-0.009080 max=0.012347 Jy/beam ! Clean residual mean=0.000058 rms=0.002813 Jy/beam ! Combined flux in latest and established models = 0.221902 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.221902 Jy ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=11.78 mas, bpa=-10.08 degrees ! Estimated noise=1.08514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257686 Jy ! Component: 100 - total flux cleaned = 0.0408124 Jy ! Component: 150 - total flux cleaned = 0.0509227 Jy ! Component: 200 - total flux cleaned = 0.0581944 Jy ! Total flux subtracted in 200 components = 0.0581944 Jy ! Clean residual min=-0.004604 max=0.005973 Jy/beam ! Clean residual mean=-0.000012 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.280097 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 133 components and 0.280097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=18.92 mas, bpa=9.913 degrees ! Estimated noise=1.27494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772074 Jy ! Component: 100 - total flux cleaned = 0.0109452 Jy ! Component: 150 - total flux cleaned = 0.0113434 Jy ! Component: 200 - total flux cleaned = 0.0113511 Jy ! Total flux subtracted in 200 components = 0.0113511 Jy ! Clean residual min=-0.003637 max=0.003872 Jy/beam ! Clean residual mean=-0.000084 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.291448 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 170 components and 0.291448 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=11.78 mas, bpa=-10.08 degrees ! Estimated noise=1.08514 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857577 Jy ! Component: 100 - total flux cleaned = 0.00169273 Jy ! Component: 150 - total flux cleaned = 0.0019649 Jy ! Component: 200 - total flux cleaned = 0.00203958 Jy ! Total flux subtracted in 200 components = 0.00203958 Jy ! Clean residual min=-0.003329 max=0.003103 Jy/beam ! Clean residual mean=-0.000060 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.293488 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 205 components and 0.293488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070177Jy sigma=0.936485 ! Fit after self-cal, rms=0.070122Jy sigma=0.934986 wmodel J1935-1602_S_2007_01_11_yyk\_map.mod ! Writing 205 model components to file: J1935-1602_S_2007_01_11_yyk_map.mod wobs J1935-1602_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1935-1602_S_2007_01_11_yyk_uvs.fits wwins J1935-1602_S_2007_01_11_yyk\_map.win ! wwins: Wrote 3 windows to J1935-1602_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285719 Jy ! Component: 100 - total flux cleaned = -0.000180737 Jy ! Component: 150 - total flux cleaned = -0.000277392 Jy ! Component: 200 - total flux cleaned = -0.000507995 Jy ! Component: 250 - total flux cleaned = -0.000596673 Jy ! Component: 300 - total flux cleaned = -0.000681647 Jy ! Component: 350 - total flux cleaned = -0.000803886 Jy ! Component: 400 - total flux cleaned = -0.000844563 Jy ! Component: 450 - total flux cleaned = -0.000882984 Jy ! Component: 500 - total flux cleaned = -0.000772665 Jy ! Component: 550 - total flux cleaned = -0.000737038 Jy ! Component: 600 - total flux cleaned = -0.000563864 Jy ! Component: 650 - total flux cleaned = -0.000496024 Jy ! Component: 700 - total flux cleaned = -0.000395876 Jy ! Component: 750 - total flux cleaned = -0.000201733 Jy ! Component: 800 - total flux cleaned = -7.57879e-05 Jy ! Component: 850 - total flux cleaned = 1.68627e-05 Jy ! Component: 900 - total flux cleaned = 4.70247e-05 Jy ! Component: 950 - total flux cleaned = 0.000166358 Jy ! Component: 1000 - total flux cleaned = 0.000224624 Jy ! Component: 1050 - total flux cleaned = 0.000195855 Jy ! Component: 1100 - total flux cleaned = 0.000139882 Jy ! Component: 1150 - total flux cleaned = 8.47788e-05 Jy ! Component: 1200 - total flux cleaned = -2.36262e-05 Jy ! Component: 1250 - total flux cleaned = -0.000130708 Jy ! Component: 1300 - total flux cleaned = -0.000288337 Jy ! Component: 1350 - total flux cleaned = -0.000366209 Jy ! Component: 1400 - total flux cleaned = -0.000570446 Jy ! Component: 1450 - total flux cleaned = -0.000645766 Jy ! Component: 1500 - total flux cleaned = -0.000770102 Jy ! Component: 1550 - total flux cleaned = -0.000917212 Jy ! Component: 1600 - total flux cleaned = -0.000989694 Jy ! Component: 1650 - total flux cleaned = -0.00106113 Jy ! Component: 1700 - total flux cleaned = -0.00110832 Jy ! Component: 1750 - total flux cleaned = -0.00122551 Jy ! Component: 1800 - total flux cleaned = -0.0013641 Jy ! Component: 1850 - total flux cleaned = -0.00143252 Jy ! Component: 1900 - total flux cleaned = -0.00145511 Jy ! Component: 1950 - total flux cleaned = -0.00158933 Jy ! Component: 2000 - total flux cleaned = -0.00170018 Jy ! Total flux subtracted in 2048 components = -0.00174415 Jy ! Clean residual min=-0.001243 max=0.001204 Jy/beam ! Clean residual mean=-0.000049 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.291743 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 339 components and 0.291743 Jy ![Exited script file: muppet] wmap "J1935-1602_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 11.78 at -10.08 degrees (North through East) ! Clean map min=-0.0022613 max=0.13807 Jy/beam ! Writing clean map to FITS file: J1935-1602_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000453605 device "J1935-1602_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1935-1602_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.985563 0.985563 1.97113 3.94225 7.8845 15.769 31.538 63.076 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 11.78 at -10.08 degrees (North through East) ! Clean map min=-0.0022613 max=0.13807 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1935-1602_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1935-1602_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1935-1602_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:59:31 2008