! Started logfile: J1905-1153_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:57:46 2008 obs J1905-1153_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1905-1153_S_2007_01_11_yyk_uve.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.711806 visibilities/baseline/integration-bin. ! Found source: J1905-1153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 1640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1905-1153_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.152183 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=11.65 mas, bpa=19.46 degrees ! Estimated noise=1.57798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102308 Jy ! Component: 100 - total flux cleaned = 0.128699 Jy ! Total flux subtracted in 100 components = 0.128699 Jy ! Clean residual min=-0.007171 max=0.009949 Jy/beam ! Clean residual mean=0.000101 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.128699 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.128699 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.083830Jy sigma=1.112110 ! Fit after self-cal, rms=0.082943Jy sigma=1.100030 ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=11.65 mas, bpa=19.46 degrees ! Estimated noise=1.57798 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=13.91 mas, bpa=18.62 degrees ! Estimated noise=1.11738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172388 Jy ! Component: 100 - total flux cleaned = 0.0233396 Jy ! Component: 150 - total flux cleaned = 0.0253434 Jy ! Component: 200 - total flux cleaned = 0.0254906 Jy ! Total flux subtracted in 200 components = 0.0254906 Jy ! Clean residual min=-0.004179 max=0.005137 Jy/beam ! Clean residual mean=-0.000053 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.15419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 69 model components to the UV plane model. ! The established model now contains 93 components and 0.15419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080500Jy sigma=1.056291 ! Fit after self-cal, rms=0.080502Jy sigma=1.056187 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.028 x 13.91 at 18.62 degrees (North through East) ! Clean map min=-0.0040273 max=0.12736 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02743 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.87 KP 0.96 ! LA 1.03 MK 1.00* OV 0.99 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991629 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.97 KP 1.00 ! LA 1.03 MK 1.00* OV 1.02 PT 1.09 ! SC 0.94 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0203 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.04 KP 0.90 ! LA 1.05 MK 1.00* OV 0.94 PT 0.91 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.080502Jy sigma=1.056187 ! Fit after self-cal, rms=0.079475Jy sigma=1.048866 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079475Jy sigma=1.048866 ! Fit after self-cal, rms=0.079475Jy sigma=1.048807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.001 mas, bmaj=13.67 mas, bpa=18.31 degrees ! Estimated noise=1.11699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103751 Jy ! Component: 100 - total flux cleaned = 0.00110133 Jy ! Component: 150 - total flux cleaned = 0.00119392 Jy ! Component: 200 - total flux cleaned = 0.00119304 Jy ! Total flux subtracted in 200 components = 0.00119304 Jy ! Clean residual min=-0.004210 max=0.004115 Jy/beam ! Clean residual mean=0.000005 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.155383 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.155383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079350Jy sigma=1.047631 ! Fit after self-cal, rms=0.079357Jy sigma=1.047592 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079357Jy sigma=1.047592 ! Fit after self-cal, rms=0.073093Jy sigma=0.962902 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235088 Jy ! Component: 100 - total flux cleaned = 0.00264041 Jy ! Component: 150 - total flux cleaned = 0.0026777 Jy ! Component: 200 - total flux cleaned = 0.00264317 Jy ! Total flux subtracted in 200 components = 0.00264317 Jy ! Clean residual min=-0.004059 max=0.003967 Jy/beam ! Clean residual mean=-0.000017 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.158026 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.158026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072994Jy sigma=0.961720 ! Fit after self-cal, rms=0.072342Jy sigma=0.955616 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.001 x 13.67 at 18.31 degrees (North through East) ! Clean map min=-0.0039457 max=0.12907 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072342Jy sigma=0.955616 ! Fit after self-cal, rms=0.070265Jy sigma=0.946342 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070265Jy sigma=0.946342 ! Fit after self-cal, rms=0.070152Jy sigma=0.945205 ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=13.34 mas, bpa=18.12 degrees ! Estimated noise=1.09428 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121878 Jy ! Component: 100 - total flux cleaned = -0.00138642 Jy ! Component: 150 - total flux cleaned = -0.0014859 Jy ! Component: 200 - total flux cleaned = -0.00157107 Jy ! Total flux subtracted in 200 components = -0.00157107 Jy ! Clean residual min=-0.004400 max=0.003600 Jy/beam ! Clean residual mean=-0.000029 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.156455 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 129 components and 0.156455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070101Jy sigma=0.944490 ! Fit after self-cal, rms=0.070081Jy sigma=0.944196 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070081Jy sigma=0.944196 ! Fit after self-cal, rms=0.071133Jy sigma=0.948568 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071133Jy sigma=0.948568 ! Fit after self-cal, rms=0.071142Jy sigma=0.948374 ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=13.24 mas, bpa=17.66 degrees ! Estimated noise=1.0885 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101485 Jy ! Component: 100 - total flux cleaned = -0.00107305 Jy ! Component: 150 - total flux cleaned = -0.00110074 Jy ! Component: 200 - total flux cleaned = -0.0011004 Jy ! Total flux subtracted in 200 components = -0.0011004 Jy ! Clean residual min=-0.004596 max=0.003660 Jy/beam ! Clean residual mean=-0.000047 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.155354 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 0.155354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071136Jy sigma=0.947961 ! Fit after self-cal, rms=0.071140Jy sigma=0.947902 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.732 mas, bmaj=17.79 mas, bpa=16.97 degrees ! Estimated noise=1.27425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381449 Jy ! Component: 100 - total flux cleaned = -0.000462025 Jy ! Component: 150 - total flux cleaned = -0.000496955 Jy ! Component: 200 - total flux cleaned = -0.000512991 Jy ! Total flux subtracted in 200 components = -0.000512991 Jy ! Clean residual min=-0.004273 max=0.003952 Jy/beam ! Clean residual mean=-0.000079 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.154841 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 154 components and 0.154841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071153Jy sigma=0.947924 ! Fit after self-cal, rms=0.071151Jy sigma=0.947888 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=11.36 mas, bpa=19.03 degrees ! Estimated noise=1.51991 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102265 Jy ! Component: 100 - total flux cleaned = 0.128532 Jy ! Component: 150 - total flux cleaned = 0.141834 Jy ! Component: 200 - total flux cleaned = 0.149237 Jy ! Total flux subtracted in 200 components = 0.149237 Jy ! Clean residual min=-0.006313 max=0.006540 Jy/beam ! Clean residual mean=0.000008 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 0.149237 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.149237 Jy ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=13.24 mas, bpa=17.66 degrees ! Estimated noise=1.0885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562161 Jy ! Component: 100 - total flux cleaned = 0.00627692 Jy ! Component: 150 - total flux cleaned = 0.00627116 Jy ! Component: 200 - total flux cleaned = 0.00632379 Jy ! Total flux subtracted in 200 components = 0.00632379 Jy ! Clean residual min=-0.004669 max=0.003683 Jy/beam ! Clean residual mean=-0.000050 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.155561 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 101 components and 0.155561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.732 mas, bmaj=17.79 mas, bpa=16.97 degrees ! Estimated noise=1.27425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139378 Jy ! Component: 100 - total flux cleaned = -0.000246037 Jy ! Component: 150 - total flux cleaned = -0.000331415 Jy ! Component: 200 - total flux cleaned = -0.000356316 Jy ! Total flux subtracted in 200 components = -0.000356316 Jy ! Clean residual min=-0.004358 max=0.003891 Jy/beam ! Clean residual mean=-0.000082 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.155205 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.155205 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=13.24 mas, bpa=17.66 degrees ! Estimated noise=1.0885 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172475 Jy ! Component: 100 - total flux cleaned = 0.000309804 Jy ! Component: 150 - total flux cleaned = 0.000337692 Jy ! Component: 200 - total flux cleaned = 0.00033826 Jy ! Total flux subtracted in 200 components = 0.00033826 Jy ! Clean residual min=-0.004629 max=0.003648 Jy/beam ! Clean residual mean=-0.000049 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.155543 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 130 components and 0.155543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071136Jy sigma=0.947922 ! Fit after self-cal, rms=0.071135Jy sigma=0.947867 wmodel J1905-1153_S_2007_01_11_yyk\_map.mod ! Writing 130 model components to file: J1905-1153_S_2007_01_11_yyk_map.mod wobs J1905-1153_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1905-1153_S_2007_01_11_yyk_uvs.fits wwins J1905-1153_S_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J1905-1153_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104859 Jy ! Component: 100 - total flux cleaned = -0.00129959 Jy ! Component: 150 - total flux cleaned = -0.00135617 Jy ! Component: 200 - total flux cleaned = -0.00140762 Jy ! Component: 250 - total flux cleaned = -0.00160966 Jy ! Component: 300 - total flux cleaned = -0.00190291 Jy ! Component: 350 - total flux cleaned = -0.00227802 Jy ! Component: 400 - total flux cleaned = -0.00259609 Jy ! Component: 450 - total flux cleaned = -0.00277311 Jy ! Component: 500 - total flux cleaned = -0.00298859 Jy ! Component: 550 - total flux cleaned = -0.00323933 Jy ! Component: 600 - total flux cleaned = -0.00348261 Jy ! Component: 650 - total flux cleaned = -0.00364195 Jy ! Component: 700 - total flux cleaned = -0.00383646 Jy ! Component: 750 - total flux cleaned = -0.00406428 Jy ! Component: 800 - total flux cleaned = -0.00417494 Jy ! Component: 850 - total flux cleaned = -0.00439194 Jy ! Component: 900 - total flux cleaned = -0.00449786 Jy ! Component: 950 - total flux cleaned = -0.00481113 Jy ! Component: 1000 - total flux cleaned = -0.00494727 Jy ! Component: 1050 - total flux cleaned = -0.00518121 Jy ! Component: 1100 - total flux cleaned = -0.00531241 Jy ! Component: 1150 - total flux cleaned = -0.00550511 Jy ! Component: 1200 - total flux cleaned = -0.00566314 Jy ! Component: 1250 - total flux cleaned = -0.00581831 Jy ! Component: 1300 - total flux cleaned = -0.00603121 Jy ! Component: 1350 - total flux cleaned = -0.00609057 Jy ! Component: 1400 - total flux cleaned = -0.00617832 Jy ! Component: 1450 - total flux cleaned = -0.00626459 Jy ! Component: 1500 - total flux cleaned = -0.00623635 Jy ! Component: 1550 - total flux cleaned = -0.0063202 Jy ! Component: 1600 - total flux cleaned = -0.00640244 Jy ! Component: 1650 - total flux cleaned = -0.00642887 Jy ! Component: 1700 - total flux cleaned = -0.006509 Jy ! Component: 1750 - total flux cleaned = -0.00658757 Jy ! Component: 1800 - total flux cleaned = -0.00651025 Jy ! Component: 1850 - total flux cleaned = -0.00668964 Jy ! Component: 1900 - total flux cleaned = -0.00673982 Jy ! Component: 1950 - total flux cleaned = -0.00676468 Jy ! Component: 2000 - total flux cleaned = -0.00696126 Jy ! Total flux subtracted in 2048 components = -0.00708272 Jy ! Clean residual min=-0.001390 max=0.001485 Jy/beam ! Clean residual mean=-0.000046 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.14846 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 270 components and 0.14846 Jy ![Exited script file: muppet] wmap "J1905-1153_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.983 x 13.24 at 17.66 degrees (North through East) ! Clean map min=-0.0035013 max=0.12551 Jy/beam ! Writing clean map to FITS file: J1905-1153_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506372 device "J1905-1153_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1905-1153_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21035 1.21035 2.4207 4.8414 9.6828 19.3656 38.7312 77.4624 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.983 x 13.24 at 17.66 degrees (North through East) ! Clean map min=-0.0035013 max=0.12551 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1905-1153_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1905-1153_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1905-1153_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:57:52 2008