! Started logfile: J1744-0849_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:53:26 2008 obs J1744-0849_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1744-0849_X_2007_01_11_yyk_uve.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.852431 visibilities/baseline/integration-bin. ! Found source: J1744-0849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2144 lines of history. ! ! Reading 1964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1744-0849_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.106451 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6609 mas, bmaj=1.82 mas, bpa=-0.7868 degrees ! Estimated noise=1.70876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516917 Jy ! Component: 100 - total flux cleaned = 0.0660364 Jy ! Total flux subtracted in 100 components = 0.0660364 Jy ! Clean residual min=-0.011810 max=0.012660 Jy/beam ! Clean residual mean=0.000017 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 0.0660364 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0660364 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.084698Jy sigma=1.380238 ! Fit after self-cal, rms=0.076353Jy sigma=1.224096 ! Inverting map and beam ! Estimated beam: bmin=0.6609 mas, bmaj=1.819 mas, bpa=-0.7849 degrees ! Estimated noise=1.70729 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8912 mas, bmaj=2.26 mas, bpa=-0.4082 degrees ! Estimated noise=1.1219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221411 Jy ! Component: 100 - total flux cleaned = 0.0290848 Jy ! Component: 150 - total flux cleaned = 0.0318501 Jy ! Component: 200 - total flux cleaned = 0.0328445 Jy ! Total flux subtracted in 200 components = 0.0328445 Jy ! Clean residual min=-0.008905 max=0.015721 Jy/beam ! Clean residual mean=0.000037 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.0988809 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.0988809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073447Jy sigma=1.138144 ! Fit after self-cal, rms=0.072517Jy sigma=1.126051 ! Inverting map ! Added new window around map position (-16.2, -1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144965 Jy ! Component: 100 - total flux cleaned = 0.0144746 Jy ! Component: 150 - total flux cleaned = 0.0146616 Jy ! Component: 200 - total flux cleaned = 0.014523 Jy ! Total flux subtracted in 200 components = 0.014523 Jy ! Clean residual min=-0.006448 max=0.013406 Jy/beam ! Clean residual mean=0.000041 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.113404 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.113404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070278Jy sigma=1.075922 ! Fit after self-cal, rms=0.070181Jy sigma=1.073072 ! Inverting map ! Added new window around map position (-3.8, -1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135855 Jy ! Component: 100 - total flux cleaned = 0.0192026 Jy ! Component: 150 - total flux cleaned = 0.0219824 Jy ! Component: 200 - total flux cleaned = 0.0245671 Jy ! Total flux subtracted in 200 components = 0.0245671 Jy ! Clean residual min=-0.004715 max=0.004342 Jy/beam ! Clean residual mean=0.000025 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.137971 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 80 components and 0.137971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068607Jy sigma=1.030585 ! Fit after self-cal, rms=0.068483Jy sigma=1.028784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8912 x 2.26 at -0.4082 degrees (North through East) ! Clean map min=-0.0043254 max=0.080979 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02371 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.06 ! LA 0.94 MK 0.92 OV 0.93 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0145 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 1.13 KP 0.91 ! LA 0.92 MK 1.00* OV 1.00 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.068483Jy sigma=1.028784 ! Fit after self-cal, rms=0.068206Jy sigma=1.024632 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068206Jy sigma=1.024632 ! Fit after self-cal, rms=0.068135Jy sigma=1.023869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=2.265 mas, bpa=-1.34 degrees ! Estimated noise=1.11135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355836 Jy ! Component: 100 - total flux cleaned = 0.0051329 Jy ! Component: 150 - total flux cleaned = 0.00581042 Jy ! Component: 200 - total flux cleaned = 0.00641083 Jy ! Total flux subtracted in 200 components = 0.00641083 Jy ! Clean residual min=-0.004179 max=0.004267 Jy/beam ! Clean residual mean=0.000022 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.144382 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 102 components and 0.144382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067967Jy sigma=1.018890 ! Fit after self-cal, rms=0.067912Jy sigma=1.018152 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067912Jy sigma=1.018152 ! Fit after self-cal, rms=0.059609Jy sigma=0.909107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480607 Jy ! Component: 100 - total flux cleaned = 0.00648349 Jy ! Component: 150 - total flux cleaned = 0.00741133 Jy ! Component: 200 - total flux cleaned = 0.00789063 Jy ! Total flux subtracted in 200 components = 0.00789063 Jy ! Clean residual min=-0.004253 max=0.003811 Jy/beam ! Clean residual mean=0.000020 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.152272 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 123 components and 0.152272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059235Jy sigma=0.901536 ! Fit after self-cal, rms=0.058150Jy sigma=0.893860 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 2.265 at -1.34 degrees (North through East) ! Clean map min=-0.0039386 max=0.085199 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=4.61 mas, bpa=11.59 degrees ! Estimated noise=1.42283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000960735 Jy ! Component: 100 - total flux cleaned = 0.00095843 Jy ! Component: 150 - total flux cleaned = 0.000913267 Jy ! Component: 200 - total flux cleaned = 0.000835905 Jy ! Total flux subtracted in 200 components = 0.000835905 Jy ! Clean residual min=-0.004516 max=0.004349 Jy/beam ! Clean residual mean=0.000038 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.153108 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 127 components and 0.153108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058141Jy sigma=0.893220 ! Fit after self-cal, rms=0.057782Jy sigma=0.891711 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6595 mas, bmaj=1.819 mas, bpa=-1.139 degrees ! Estimated noise=1.69031 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0672333 Jy ! Component: 100 - total flux cleaned = 0.0870188 Jy ! Component: 150 - total flux cleaned = 0.100745 Jy ! Component: 200 - total flux cleaned = 0.110492 Jy ! Total flux subtracted in 200 components = 0.110492 Jy ! Clean residual min=-0.006228 max=0.006559 Jy/beam ! Clean residual mean=0.000011 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.110492 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.110492 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=2.265 mas, bpa=-1.34 degrees ! Estimated noise=1.11135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132696 Jy ! Component: 100 - total flux cleaned = 0.0222226 Jy ! Component: 150 - total flux cleaned = 0.0282209 Jy ! Component: 200 - total flux cleaned = 0.0323016 Jy ! Total flux subtracted in 200 components = 0.0323016 Jy ! Clean residual min=-0.005068 max=0.003853 Jy/beam ! Clean residual mean=0.000023 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.142793 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 67 components and 0.142793 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=4.61 mas, bpa=11.59 degrees ! Estimated noise=1.42283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473834 Jy ! Component: 100 - total flux cleaned = 0.00702718 Jy ! Component: 150 - total flux cleaned = 0.00855774 Jy ! Component: 200 - total flux cleaned = 0.00937351 Jy ! Total flux subtracted in 200 components = 0.00937351 Jy ! Clean residual min=-0.004953 max=0.004084 Jy/beam ! Clean residual mean=0.000037 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.152167 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 92 components and 0.152167 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=2.265 mas, bpa=-1.34 degrees ! Estimated noise=1.11135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881609 Jy ! Component: 100 - total flux cleaned = -0.00100597 Jy ! Component: 150 - total flux cleaned = -0.000889555 Jy ! Component: 200 - total flux cleaned = -0.000791918 Jy ! Total flux subtracted in 200 components = -0.000791918 Jy ! Clean residual min=-0.003892 max=0.003506 Jy/beam ! Clean residual mean=0.000020 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.151375 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.151375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057669Jy sigma=0.891060 ! Fit after self-cal, rms=0.057465Jy sigma=0.889687 wmodel J1744-0849_X_2007_01_11_yyk\_map.mod ! Writing 110 model components to file: J1744-0849_X_2007_01_11_yyk_map.mod wobs J1744-0849_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1744-0849_X_2007_01_11_yyk_uvs.fits wwins J1744-0849_X_2007_01_11_yyk\_map.win ! wwins: Wrote 3 windows to J1744-0849_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000580676 Jy ! Component: 100 - total flux cleaned = -0.000158984 Jy ! Component: 150 - total flux cleaned = 8.52151e-06 Jy ! Component: 200 - total flux cleaned = -9.27992e-05 Jy ! Component: 250 - total flux cleaned = -0.000383223 Jy ! Component: 300 - total flux cleaned = -0.000568139 Jy ! Component: 350 - total flux cleaned = -0.000791649 Jy ! Component: 400 - total flux cleaned = -0.000964404 Jy ! Component: 450 - total flux cleaned = -0.00109048 Jy ! Component: 500 - total flux cleaned = -0.00113032 Jy ! Component: 550 - total flux cleaned = -0.00113012 Jy ! Component: 600 - total flux cleaned = -0.00124555 Jy ! Component: 650 - total flux cleaned = -0.00139421 Jy ! Component: 700 - total flux cleaned = -0.00143055 Jy ! Component: 750 - total flux cleaned = -0.00167954 Jy ! Component: 800 - total flux cleaned = -0.00178396 Jy ! Component: 850 - total flux cleaned = -0.00202185 Jy ! Component: 900 - total flux cleaned = -0.00208848 Jy ! Component: 950 - total flux cleaned = -0.00215416 Jy ! Component: 1000 - total flux cleaned = -0.00225139 Jy ! Component: 1050 - total flux cleaned = -0.00231465 Jy ! Component: 1100 - total flux cleaned = -0.00234565 Jy ! Component: 1150 - total flux cleaned = -0.00240698 Jy ! Component: 1200 - total flux cleaned = -0.0024663 Jy ! Component: 1250 - total flux cleaned = -0.00249587 Jy ! Component: 1300 - total flux cleaned = -0.00255504 Jy ! Component: 1350 - total flux cleaned = -0.00264124 Jy ! Component: 1400 - total flux cleaned = -0.00269749 Jy ! Component: 1450 - total flux cleaned = -0.00275357 Jy ! Component: 1500 - total flux cleaned = -0.00275376 Jy ! Component: 1550 - total flux cleaned = -0.00286202 Jy ! Component: 1600 - total flux cleaned = -0.00299545 Jy ! Component: 1650 - total flux cleaned = -0.0030752 Jy ! Component: 1700 - total flux cleaned = -0.00325773 Jy ! Component: 1750 - total flux cleaned = -0.00338556 Jy ! Component: 1800 - total flux cleaned = -0.00346173 Jy ! Component: 1850 - total flux cleaned = -0.00358773 Jy ! Component: 1900 - total flux cleaned = -0.00366262 Jy ! Component: 1950 - total flux cleaned = -0.00378567 Jy ! Component: 2000 - total flux cleaned = -0.00383431 Jy ! Total flux subtracted in 2048 components = -0.00402731 Jy ! Clean residual min=-0.001375 max=0.001356 Jy/beam ! Clean residual mean=0.000009 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.147347 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 249 components and 0.147347 Jy ![Exited script file: muppet] wmap "J1744-0849_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 2.265 at -1.34 degrees (North through East) ! Clean map min=-0.0024349 max=0.087613 Jy/beam ! Writing clean map to FITS file: J1744-0849_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0876134 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000430849 device "J1744-0849_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1744-0849_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47528 1.47528 2.95057 5.90113 11.8023 23.6045 47.2091 94.4181 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 2.265 at -1.34 degrees (North through East) ! Clean map min=-0.0024349 max=0.087613 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1744-0849_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1744-0849_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1744-0849_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:53:31 2008