! Started logfile: J1743-0350_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:52:55 2008 obs J1743-0350_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1743-0350_S_2006_12_18_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1743-0350_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 4.95027 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.457 mas, bpa=1.036 degrees ! Estimated noise=3.33205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.091 Jy ! Component: 100 - total flux cleaned = 4.8099 Jy ! Total flux subtracted in 100 components = 4.8099 Jy ! Clean residual min=-0.108081 max=0.207712 Jy/beam ! Clean residual mean=-0.000869 rms=0.041874 Jy/beam ! Combined flux in latest and established models = 4.8099 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 4.8099 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.583384Jy sigma=6.327598 ! Fit after self-cal, rms=0.583217Jy sigma=6.304116 ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.457 mas, bpa=1.036 degrees ! Estimated noise=3.33205 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=8.034 mas, bpa=-1.302 degrees ! Estimated noise=2.414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.341768 Jy ! Component: 100 - total flux cleaned = 0.462609 Jy ! Component: 150 - total flux cleaned = 0.507884 Jy ! Component: 200 - total flux cleaned = 0.511918 Jy ! Total flux subtracted in 200 components = 0.511918 Jy ! Clean residual min=-0.087934 max=0.065329 Jy/beam ! Clean residual mean=-0.002889 rms=0.020631 Jy/beam ! Combined flux in latest and established models = 5.32182 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 5.32182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424512Jy sigma=4.552950 ! Fit after self-cal, rms=0.424509Jy sigma=4.552772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.276 x 8.034 at -1.302 degrees (North through East) ! Clean map min=-0.084488 max=4.8702 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01563 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.90 KP 0.95 ! LA 1.08 MK 1.00 NL 0.99 OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98679 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.00 ! LA 1.05 MK 1.07 NL 1.01 OV 1.00 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.983737 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.96 KP 0.96 ! LA 1.00 MK 1.02 NL 1.09 OV 1.02 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01714 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.93 KP 0.93 ! LA 0.99 MK 1.00 NL 1.00 OV 0.98 ! PT 0.93 SC 1.08 ! ! ! Fit before self-cal, rms=0.424509Jy sigma=4.552772 ! Fit after self-cal, rms=0.312173Jy sigma=3.249653 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312173Jy sigma=3.249653 ! Fit after self-cal, rms=0.312146Jy sigma=3.249648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=8.109 mas, bpa=-1.22 degrees ! Estimated noise=2.41443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0084622 Jy ! Component: 100 - total flux cleaned = -0.00816116 Jy ! Component: 150 - total flux cleaned = -0.00788727 Jy ! Component: 200 - total flux cleaned = -0.00764579 Jy ! Total flux subtracted in 200 components = -0.00764579 Jy ! Clean residual min=-0.018518 max=0.015481 Jy/beam ! Clean residual mean=-0.000212 rms=0.004860 Jy/beam ! Combined flux in latest and established models = 5.31417 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 5.31417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311372Jy sigma=3.243640 ! Fit after self-cal, rms=0.311400Jy sigma=3.243458 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311400Jy sigma=3.243458 ! Fit after self-cal, rms=0.188504Jy sigma=2.088948 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346783 Jy ! Component: 100 - total flux cleaned = 0.00120145 Jy ! Component: 150 - total flux cleaned = 0.0018974 Jy ! Component: 200 - total flux cleaned = 0.00191232 Jy ! Total flux subtracted in 200 components = 0.00191232 Jy ! Clean residual min=-0.015851 max=0.014359 Jy/beam ! Clean residual mean=-0.000216 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 5.31608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 5.31608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186924Jy sigma=2.081863 ! Fit after self-cal, rms=0.179786Jy sigma=2.012860 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 8.109 at -1.22 degrees (North through East) ! Clean map min=-0.015225 max=4.8824 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179786Jy sigma=2.012860 ! Fit after self-cal, rms=0.092554Jy sigma=0.943467 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092554Jy sigma=0.943467 ! Fit after self-cal, rms=0.091807Jy sigma=0.934664 ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.125 mas, bpa=-1.25 degrees ! Estimated noise=2.41418 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00411645 Jy ! Component: 100 - total flux cleaned = -0.00435431 Jy ! Component: 150 - total flux cleaned = -0.00477832 Jy ! Component: 200 - total flux cleaned = -0.00497036 Jy ! Total flux subtracted in 200 components = -0.00497036 Jy ! Clean residual min=-0.015381 max=0.012689 Jy/beam ! Clean residual mean=-0.000171 rms=0.003897 Jy/beam ! Combined flux in latest and established models = 5.31111 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 5.31111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090519Jy sigma=0.922803 ! Fit after self-cal, rms=0.090460Jy sigma=0.921986 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090460Jy sigma=0.921986 ! Fit after self-cal, rms=0.086573Jy sigma=0.874147 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086573Jy sigma=0.874147 ! Fit after self-cal, rms=0.086567Jy sigma=0.874091 ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.138 mas, bpa=-1.31 degrees ! Estimated noise=2.41526 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209867 Jy ! Component: 100 - total flux cleaned = -0.00256693 Jy ! Component: 150 - total flux cleaned = -0.00295992 Jy ! Component: 200 - total flux cleaned = -0.00332096 Jy ! Total flux subtracted in 200 components = -0.00332096 Jy ! Clean residual min=-0.015007 max=0.012404 Jy/beam ! Clean residual mean=-0.000170 rms=0.003765 Jy/beam ! Combined flux in latest and established models = 5.30779 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 5.30779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085612Jy sigma=0.864302 ! Fit after self-cal, rms=0.085615Jy sigma=0.864196 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.849 mas, bmaj=14.39 mas, bpa=3.252 degrees ! Estimated noise=2.97691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00525232 Jy ! Component: 100 - total flux cleaned = -0.00525302 Jy ! Component: 150 - total flux cleaned = -0.00516108 Jy ! Component: 200 - total flux cleaned = -0.00516028 Jy ! Total flux subtracted in 200 components = -0.00516028 Jy ! Clean residual min=-0.013236 max=0.013530 Jy/beam ! Clean residual mean=-0.000225 rms=0.004532 Jy/beam ! Combined flux in latest and established models = 5.30263 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 83 components and 5.30263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085714Jy sigma=0.863750 ! Fit after self-cal, rms=0.085712Jy sigma=0.863528 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=6.491 mas, bpa=0.9836 degrees ! Estimated noise=3.33109 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.09775 Jy ! Component: 100 - total flux cleaned = 4.78654 Jy ! Component: 150 - total flux cleaned = 5.05818 Jy ! Component: 200 - total flux cleaned = 5.19292 Jy ! Total flux subtracted in 200 components = 5.19292 Jy ! Clean residual min=-0.032446 max=0.047362 Jy/beam ! Clean residual mean=-0.000129 rms=0.010466 Jy/beam ! Combined flux in latest and established models = 5.19292 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 5.19292 Jy ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.138 mas, bpa=-1.31 degrees ! Estimated noise=2.41526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0775386 Jy ! Component: 100 - total flux cleaned = 0.105038 Jy ! Component: 150 - total flux cleaned = 0.113719 Jy ! Component: 200 - total flux cleaned = 0.114878 Jy ! Total flux subtracted in 200 components = 0.114878 Jy ! Clean residual min=-0.013583 max=0.013053 Jy/beam ! Clean residual mean=-0.000171 rms=0.003840 Jy/beam ! Combined flux in latest and established models = 5.30779 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 5.3078 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.849 mas, bmaj=14.39 mas, bpa=3.252 degrees ! Estimated noise=2.97691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00409681 Jy ! Component: 100 - total flux cleaned = -0.00410408 Jy ! Component: 150 - total flux cleaned = -0.00398991 Jy ! Component: 200 - total flux cleaned = -0.00388243 Jy ! Total flux subtracted in 200 components = -0.00388243 Jy ! Clean residual min=-0.012952 max=0.013531 Jy/beam ! Clean residual mean=-0.000247 rms=0.004590 Jy/beam ! Combined flux in latest and established models = 5.30391 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 5.30391 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.138 mas, bpa=-1.31 degrees ! Estimated noise=2.41526 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493384 Jy ! Component: 100 - total flux cleaned = 0.00570403 Jy ! Component: 150 - total flux cleaned = 0.00570885 Jy ! Component: 200 - total flux cleaned = 0.00550475 Jy ! Total flux subtracted in 200 components = 0.00550475 Jy ! Clean residual min=-0.013902 max=0.012753 Jy/beam ! Clean residual mean=-0.000181 rms=0.003762 Jy/beam ! Combined flux in latest and established models = 5.30942 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 5.30942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085655Jy sigma=0.863535 ! Fit after self-cal, rms=0.085641Jy sigma=0.863151 wmodel J1743-0350_S_2006_12_18_yyk\_map.mod ! Writing 59 model components to file: J1743-0350_S_2006_12_18_yyk_map.mod wobs J1743-0350_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1743-0350_S_2006_12_18_yyk_uvs.fits wwins J1743-0350_S_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00452322 Jy ! Component: 100 - total flux cleaned = -0.00757384 Jy ! Component: 150 - total flux cleaned = -0.00877166 Jy ! Component: 200 - total flux cleaned = -0.00951622 Jy ! Component: 250 - total flux cleaned = -0.00968736 Jy ! Component: 300 - total flux cleaned = -0.00984643 Jy ! Component: 350 - total flux cleaned = -0.0100033 Jy ! Component: 400 - total flux cleaned = -0.010458 Jy ! Component: 450 - total flux cleaned = -0.010458 Jy ! Component: 500 - total flux cleaned = -0.0108738 Jy ! Component: 550 - total flux cleaned = -0.0111389 Jy ! Component: 600 - total flux cleaned = -0.0112667 Jy ! Component: 650 - total flux cleaned = -0.0116385 Jy ! Component: 700 - total flux cleaned = -0.012115 Jy ! Component: 750 - total flux cleaned = -0.0125778 Jy ! Component: 800 - total flux cleaned = -0.0133544 Jy ! Component: 850 - total flux cleaned = -0.0136717 Jy ! Component: 900 - total flux cleaned = -0.0140922 Jy ! Component: 950 - total flux cleaned = -0.0148046 Jy ! Component: 1000 - total flux cleaned = -0.0152982 Jy ! Component: 1050 - total flux cleaned = -0.0155868 Jy ! Component: 1100 - total flux cleaned = -0.0158666 Jy ! Component: 1150 - total flux cleaned = -0.0161397 Jy ! Component: 1200 - total flux cleaned = -0.0162285 Jy ! Component: 1250 - total flux cleaned = -0.0166599 Jy ! Component: 1300 - total flux cleaned = -0.0167451 Jy ! Component: 1350 - total flux cleaned = -0.0169924 Jy ! Component: 1400 - total flux cleaned = -0.0172354 Jy ! Component: 1450 - total flux cleaned = -0.0175514 Jy ! Component: 1500 - total flux cleaned = -0.0180892 Jy ! Component: 1550 - total flux cleaned = -0.0188413 Jy ! Component: 1600 - total flux cleaned = -0.0193573 Jy ! Component: 1650 - total flux cleaned = -0.0197933 Jy ! Component: 1700 - total flux cleaned = -0.0205735 Jy ! Component: 1750 - total flux cleaned = -0.02113 Jy ! Component: 1800 - total flux cleaned = -0.0218795 Jy ! Component: 1850 - total flux cleaned = -0.0222816 Jy ! Component: 1900 - total flux cleaned = -0.0229408 Jy ! Component: 1950 - total flux cleaned = -0.0234582 Jy ! Component: 2000 - total flux cleaned = -0.0240305 Jy ! Total flux subtracted in 2048 components = -0.0242185 Jy ! Clean residual min=-0.003670 max=0.003497 Jy/beam ! Clean residual mean=-0.000022 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 5.2852 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 186 components and 5.2852 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 8.138 at -1.31 degrees (North through East) ! Clean map min=-0.0082084 max=4.888 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.888 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00116704 device "J1743-0350_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0716266 0.0716266 0.143253 0.286506 0.573013 1.14603 2.29205 4.5841 9.1682 18.3364 36.6728 73.3456 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 4.887 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 8.138 at -1.31 degrees (North through East) ! Clean map min=-0.0082084 max=4.888 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1743-0350_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1743-0350_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1743-0350_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:53:01 2008