! Started logfile: J1507-1652_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:45:48 2008 obs J1507-1652_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1507-1652_S_2007_01_11_yyk_uve.fits ! AN table 1: 4 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.944444 visibilities/baseline/integration-bin. ! Found source: J1507-1652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1507-1652_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.98444 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.631 mas, bpa=6.703 degrees ! Estimated noise=2.63169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.5811 Jy ! Component: 100 - total flux cleaned = 2.03086 Jy ! Total flux subtracted in 100 components = 2.03086 Jy ! Clean residual min=-0.070005 max=0.142891 Jy/beam ! Clean residual mean=0.000334 rms=0.028083 Jy/beam ! Combined flux in latest and established models = 2.03086 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.03086 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.365180Jy sigma=5.758152 ! Fit after self-cal, rms=0.354381Jy sigma=5.629618 ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.631 mas, bpa=6.703 degrees ! Estimated noise=2.63169 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.814 mas, bpa=-1.02 degrees ! Estimated noise=1.99397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.214345 Jy ! Component: 100 - total flux cleaned = 0.307368 Jy ! Component: 150 - total flux cleaned = 0.353546 Jy ! Component: 200 - total flux cleaned = 0.361907 Jy ! Total flux subtracted in 200 components = 0.361907 Jy ! Clean residual min=-0.051957 max=0.074593 Jy/beam ! Clean residual mean=-0.000105 rms=0.018931 Jy/beam ! Combined flux in latest and established models = 2.39277 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 2.39277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229421Jy sigma=4.087614 ! Fit after self-cal, rms=0.228739Jy sigma=4.083498 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 7.814 at -1.02 degrees (North through East) ! Clean map min=-0.051228 max=1.7519 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04644 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 0.93 KP 0.95 ! LA 1.04 MK 0.99 OV 0.94 PT 1.00 ! SC 0.87 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01433 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.03 KP 1.00 ! LA 1.01 MK 1.05 OV 0.98 PT 1.00 ! SC 0.88 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.968372 ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.99 HN 1.01 KP 0.97 ! LA 0.98 MK 1.02 OV 1.00 PT 1.03 ! SC 0.90 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03552 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.98 HN 1.01 KP 0.96 ! LA 0.98 MK 1.04 OV 0.97 PT 0.94 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.228739Jy sigma=4.083498 ! Fit after self-cal, rms=0.184302Jy sigma=2.798737 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184302Jy sigma=2.798737 ! Fit after self-cal, rms=0.184238Jy sigma=2.798590 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=7.775 mas, bpa=1.161 degrees ! Estimated noise=2.02438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625498 Jy ! Component: 100 - total flux cleaned = 0.0749302 Jy ! Component: 150 - total flux cleaned = 0.0749168 Jy ! Component: 200 - total flux cleaned = 0.0743837 Jy ! Total flux subtracted in 200 components = 0.0743837 Jy ! Clean residual min=-0.030996 max=0.025158 Jy/beam ! Clean residual mean=0.000145 rms=0.007140 Jy/beam ! Combined flux in latest and established models = 2.46715 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 2.46715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164253Jy sigma=2.566001 ! Fit after self-cal, rms=0.163046Jy sigma=2.553078 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163046Jy sigma=2.553078 ! Fit after self-cal, rms=0.147307Jy sigma=2.317811 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443825 Jy ! Component: 100 - total flux cleaned = 0.00347056 Jy ! Component: 150 - total flux cleaned = 0.00269887 Jy ! Component: 200 - total flux cleaned = 0.00235557 Jy ! Total flux subtracted in 200 components = 0.00235557 Jy ! Clean residual min=-0.028630 max=0.022572 Jy/beam ! Clean residual mean=0.000115 rms=0.006756 Jy/beam ! Combined flux in latest and established models = 2.46951 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 2.46951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144312Jy sigma=2.287672 ! Fit after self-cal, rms=0.142925Jy sigma=2.267274 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.992 x 7.775 at 1.161 degrees (North through East) ! Clean map min=-0.027296 max=1.762 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142925Jy sigma=2.267274 ! Fit after self-cal, rms=0.079043Jy sigma=1.161984 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079043Jy sigma=1.161984 ! Fit after self-cal, rms=0.078965Jy sigma=1.159816 ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.752 mas, bpa=1.447 degrees ! Estimated noise=2.01245 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408577 Jy ! Component: 100 - total flux cleaned = 0.00190168 Jy ! Component: 150 - total flux cleaned = 0.00116224 Jy ! Component: 200 - total flux cleaned = 0.0008471 Jy ! Total flux subtracted in 200 components = 0.0008471 Jy ! Clean residual min=-0.021009 max=0.014326 Jy/beam ! Clean residual mean=0.000039 rms=0.004514 Jy/beam ! Combined flux in latest and established models = 2.47036 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 2.47036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074643Jy sigma=1.100260 ! Fit after self-cal, rms=0.074117Jy sigma=1.092911 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074117Jy sigma=1.092911 ! Fit after self-cal, rms=0.072366Jy sigma=1.063938 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072366Jy sigma=1.063938 ! Fit after self-cal, rms=0.072366Jy sigma=1.063924 ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.752 mas, bpa=1.373 degrees ! Estimated noise=2.01279 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122533 Jy ! Component: 100 - total flux cleaned = 0.000534315 Jy ! Component: 150 - total flux cleaned = 0.000529503 Jy ! Component: 200 - total flux cleaned = 0.000259951 Jy ! Total flux subtracted in 200 components = 0.000259951 Jy ! Clean residual min=-0.018924 max=0.013257 Jy/beam ! Clean residual mean=0.000046 rms=0.004068 Jy/beam ! Combined flux in latest and established models = 2.47062 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 2.47062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069702Jy sigma=1.027473 ! Fit after self-cal, rms=0.069347Jy sigma=1.022728 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=17.66 mas, bpa=13.92 degrees ! Estimated noise=2.65297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00455421 Jy ! Component: 100 - total flux cleaned = -0.00510754 Jy ! Component: 150 - total flux cleaned = -0.00546193 Jy ! Component: 200 - total flux cleaned = -0.00577096 Jy ! Total flux subtracted in 200 components = -0.00577096 Jy ! Clean residual min=-0.017483 max=0.013973 Jy/beam ! Clean residual mean=0.000179 rms=0.005709 Jy/beam ! Combined flux in latest and established models = 2.46484 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 2.46485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069468Jy sigma=1.025431 ! Fit after self-cal, rms=0.069335Jy sigma=1.022637 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=6.682 mas, bpa=7.834 degrees ! Estimated noise=2.56993 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.57832 Jy ! Component: 100 - total flux cleaned = 2.04379 Jy ! Component: 150 - total flux cleaned = 2.23706 Jy ! Component: 200 - total flux cleaned = 2.33353 Jy ! Total flux subtracted in 200 components = 2.33353 Jy ! Clean residual min=-0.023541 max=0.042344 Jy/beam ! Clean residual mean=0.000183 rms=0.008104 Jy/beam ! Combined flux in latest and established models = 2.33353 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 2.33353 Jy ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.752 mas, bpa=1.373 degrees ! Estimated noise=2.01279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0707729 Jy ! Component: 100 - total flux cleaned = 0.104288 Jy ! Component: 150 - total flux cleaned = 0.117429 Jy ! Component: 200 - total flux cleaned = 0.121998 Jy ! Total flux subtracted in 200 components = 0.121998 Jy ! Clean residual min=-0.015940 max=0.011870 Jy/beam ! Clean residual mean=0.000130 rms=0.003615 Jy/beam ! Combined flux in latest and established models = 2.45553 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 65 components and 2.45553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=17.66 mas, bpa=13.92 degrees ! Estimated noise=2.65297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697071 Jy ! Component: 100 - total flux cleaned = 0.00793966 Jy ! Component: 150 - total flux cleaned = 0.0088791 Jy ! Component: 200 - total flux cleaned = 0.00952835 Jy ! Total flux subtracted in 200 components = 0.00952835 Jy ! Clean residual min=-0.015768 max=0.012547 Jy/beam ! Clean residual mean=0.000237 rms=0.005063 Jy/beam ! Combined flux in latest and established models = 2.46506 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 2.46506 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.752 mas, bpa=1.373 degrees ! Estimated noise=2.01279 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102887 Jy ! Component: 100 - total flux cleaned = -0.000762199 Jy ! Component: 150 - total flux cleaned = -0.000758725 Jy ! Component: 200 - total flux cleaned = -0.000338627 Jy ! Total flux subtracted in 200 components = -0.000338627 Jy ! Clean residual min=-0.013472 max=0.011573 Jy/beam ! Clean residual mean=0.000110 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 2.46472 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 2.46472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064996Jy sigma=0.950592 ! Fit after self-cal, rms=0.064740Jy sigma=0.946942 wmodel J1507-1652_S_2007_01_11_yyk\_map.mod ! Writing 91 model components to file: J1507-1652_S_2007_01_11_yyk_map.mod wobs J1507-1652_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1507-1652_S_2007_01_11_yyk_uvs.fits wwins J1507-1652_S_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J1507-1652_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313244 Jy ! Component: 100 - total flux cleaned = -0.00410013 Jy ! Component: 150 - total flux cleaned = -0.00342353 Jy ! Component: 200 - total flux cleaned = -0.00296878 Jy ! Component: 250 - total flux cleaned = -0.0028461 Jy ! Component: 300 - total flux cleaned = -0.00222268 Jy ! Component: 350 - total flux cleaned = -0.0018733 Jy ! Component: 400 - total flux cleaned = -0.0014386 Jy ! Component: 450 - total flux cleaned = -0.00123025 Jy ! Component: 500 - total flux cleaned = -0.000838371 Jy ! Component: 550 - total flux cleaned = -0.00112347 Jy ! Component: 600 - total flux cleaned = -0.00121358 Jy ! Component: 650 - total flux cleaned = -0.00164883 Jy ! Component: 700 - total flux cleaned = -0.00181629 Jy ! Component: 750 - total flux cleaned = -0.00214152 Jy ! Component: 800 - total flux cleaned = -0.00252946 Jy ! Component: 850 - total flux cleaned = -0.00275588 Jy ! Component: 900 - total flux cleaned = -0.00319284 Jy ! Component: 950 - total flux cleaned = -0.00333555 Jy ! Component: 1000 - total flux cleaned = -0.00374603 Jy ! Component: 1050 - total flux cleaned = -0.00414295 Jy ! Component: 1100 - total flux cleaned = -0.00439976 Jy ! Component: 1150 - total flux cleaned = -0.00502869 Jy ! Component: 1200 - total flux cleaned = -0.00564369 Jy ! Component: 1250 - total flux cleaned = -0.00600475 Jy ! Component: 1300 - total flux cleaned = -0.00659437 Jy ! Component: 1350 - total flux cleaned = -0.00671057 Jy ! Component: 1400 - total flux cleaned = -0.00699446 Jy ! Component: 1450 - total flux cleaned = -0.00732927 Jy ! Component: 1500 - total flux cleaned = -0.0076582 Jy ! Component: 1550 - total flux cleaned = -0.00781969 Jy ! Component: 1600 - total flux cleaned = -0.00787383 Jy ! Component: 1650 - total flux cleaned = -0.00813579 Jy ! Component: 1700 - total flux cleaned = -0.00828984 Jy ! Component: 1750 - total flux cleaned = -0.00849063 Jy ! Component: 1800 - total flux cleaned = -0.00844029 Jy ! Component: 1850 - total flux cleaned = -0.00849063 Jy ! Component: 1900 - total flux cleaned = -0.00853978 Jy ! Component: 1950 - total flux cleaned = -0.00844374 Jy ! Component: 2000 - total flux cleaned = -0.00849144 Jy ! Total flux subtracted in 2048 components = -0.0084916 Jy ! Clean residual min=-0.002927 max=0.002689 Jy/beam ! Clean residual mean=-0.000006 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 2.45623 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 225 components and 2.45623 Jy ![Exited script file: muppet] wmap "J1507-1652_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 7.752 at 1.373 degrees (North through East) ! Clean map min=-0.0085502 max=1.7641 Jy/beam ! Writing clean map to FITS file: J1507-1652_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.76407 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000866504 device "J1507-1652_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1507-1652_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.147359 0.147359 0.294718 0.589436 1.17887 2.35775 4.71549 9.43098 18.862 37.7239 75.4478 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.764 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 7.752 at 1.373 degrees (North through East) ! Clean map min=-0.0085502 max=1.7641 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1507-1652_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1507-1652_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1507-1652_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:45:54 2008