! Started logfile: J1507-1652_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:45:42 2008 obs J1507-1652_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1507-1652_S_2006_12_18_yyk_uve.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1507-1652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1507-1652_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.98091 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.478 mas, bmaj=6.433 mas, bpa=-1.585 degrees ! Estimated noise=3.09906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.66177 Jy ! Component: 100 - total flux cleaned = 2.1076 Jy ! Total flux subtracted in 100 components = 2.1076 Jy ! Clean residual min=-0.075811 max=0.138567 Jy/beam ! Clean residual mean=0.001061 rms=0.028226 Jy/beam ! Combined flux in latest and established models = 2.1076 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.1076 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.318327Jy sigma=4.404913 ! Fit after self-cal, rms=0.303570Jy sigma=4.251945 ! Inverting map and beam ! Estimated beam: bmin=2.478 mas, bmaj=6.433 mas, bpa=-1.585 degrees ! Estimated noise=3.09906 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=7.697 mas, bpa=-3.141 degrees ! Estimated noise=2.46012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.232356 Jy ! Component: 100 - total flux cleaned = 0.317389 Jy ! Component: 150 - total flux cleaned = 0.352161 Jy ! Component: 200 - total flux cleaned = 0.36547 Jy ! Total flux subtracted in 200 components = 0.36547 Jy ! Clean residual min=-0.041139 max=0.032251 Jy/beam ! Clean residual mean=-0.000480 rms=0.010458 Jy/beam ! Combined flux in latest and established models = 2.47307 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 2.47307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167094Jy sigma=2.252316 ! Fit after self-cal, rms=0.165157Jy sigma=2.236209 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.898 x 7.697 at -3.141 degrees (North through East) ! Clean map min=-0.041353 max=1.8456 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02408 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.91 KP 0.93 ! LA 1.05 MK 0.97 NL 0.99 OV 0.96 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993626 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.02 KP 0.99 ! LA 1.04 MK 1.02 NL 1.02 OV 0.99 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.981053 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.00 KP 0.96 ! LA 1.01 MK 1.01 NL 1.11 OV 1.02 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00224 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.97 KP 0.94 ! LA 1.00 MK 1.02 NL 1.04 OV 1.00 ! PT 0.93 SC 1.04 ! ! ! Fit before self-cal, rms=0.165157Jy sigma=2.236209 ! Fit after self-cal, rms=0.128843Jy sigma=1.670536 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128843Jy sigma=1.670536 ! Fit after self-cal, rms=0.128820Jy sigma=1.670511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=7.715 mas, bpa=-2.839 degrees ! Estimated noise=2.45607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454721 Jy ! Component: 100 - total flux cleaned = 0.00486986 Jy ! Component: 150 - total flux cleaned = 0.00548998 Jy ! Component: 200 - total flux cleaned = 0.00601469 Jy ! Total flux subtracted in 200 components = 0.00601469 Jy ! Clean residual min=-0.014115 max=0.015816 Jy/beam ! Clean residual mean=0.000013 rms=0.003997 Jy/beam ! Combined flux in latest and established models = 2.47909 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 2.47909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125504Jy sigma=1.639591 ! Fit after self-cal, rms=0.125173Jy sigma=1.632851 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125173Jy sigma=1.632851 ! Fit after self-cal, rms=0.103503Jy sigma=1.382753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214654 Jy ! Component: 100 - total flux cleaned = 0.00246355 Jy ! Component: 150 - total flux cleaned = 0.00246311 Jy ! Component: 200 - total flux cleaned = 0.00247294 Jy ! Total flux subtracted in 200 components = 0.00247294 Jy ! Clean residual min=-0.013426 max=0.015205 Jy/beam ! Clean residual mean=0.000008 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 2.48156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 2.48156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101549Jy sigma=1.363895 ! Fit after self-cal, rms=0.099418Jy sigma=1.341990 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.898 x 7.715 at -2.839 degrees (North through East) ! Clean map min=-0.013306 max=1.8361 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099418Jy sigma=1.341990 ! Fit after self-cal, rms=0.076512Jy sigma=0.953906 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076512Jy sigma=0.953906 ! Fit after self-cal, rms=0.076327Jy sigma=0.952087 ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.708 mas, bpa=-2.733 degrees ! Estimated noise=2.45124 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175126 Jy ! Component: 100 - total flux cleaned = 0.00146658 Jy ! Component: 150 - total flux cleaned = 0.00190669 Jy ! Component: 200 - total flux cleaned = 0.00247143 Jy ! Total flux subtracted in 200 components = 0.00247143 Jy ! Clean residual min=-0.011429 max=0.009784 Jy/beam ! Clean residual mean=0.000000 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 2.48403 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 2.48403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074797Jy sigma=0.932760 ! Fit after self-cal, rms=0.074296Jy sigma=0.928794 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074296Jy sigma=0.928794 ! Fit after self-cal, rms=0.073146Jy sigma=0.916721 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073146Jy sigma=0.916721 ! Fit after self-cal, rms=0.073142Jy sigma=0.916710 ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.705 mas, bpa=-2.731 degrees ! Estimated noise=2.45006 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973351 Jy ! Component: 100 - total flux cleaned = 0.00100469 Jy ! Component: 150 - total flux cleaned = 0.00153198 Jy ! Component: 200 - total flux cleaned = 0.00198163 Jy ! Total flux subtracted in 200 components = 0.00198163 Jy ! Clean residual min=-0.010442 max=0.009113 Jy/beam ! Clean residual mean=-0.000005 rms=0.002602 Jy/beam ! Combined flux in latest and established models = 2.48601 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 2.48601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072213Jy sigma=0.904751 ! Fit after self-cal, rms=0.071922Jy sigma=0.902478 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=16.58 mas, bpa=1.346 degrees ! Estimated noise=3.25704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173874 Jy ! Component: 100 - total flux cleaned = 0.00183288 Jy ! Component: 150 - total flux cleaned = 0.00190148 Jy ! Component: 200 - total flux cleaned = 0.00201726 Jy ! Total flux subtracted in 200 components = 0.00201726 Jy ! Clean residual min=-0.009791 max=0.009180 Jy/beam ! Clean residual mean=-0.000033 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 2.48803 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 2.48803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071950Jy sigma=0.903965 ! Fit after self-cal, rms=0.071840Jy sigma=0.901753 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.475 mas, bmaj=6.43 mas, bpa=-1.438 degrees ! Estimated noise=3.06593 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.65743 Jy ! Component: 100 - total flux cleaned = 2.10541 Jy ! Component: 150 - total flux cleaned = 2.29398 Jy ! Component: 200 - total flux cleaned = 2.38241 Jy ! Total flux subtracted in 200 components = 2.38241 Jy ! Clean residual min=-0.021172 max=0.031240 Jy/beam ! Clean residual mean=0.000317 rms=0.006679 Jy/beam ! Combined flux in latest and established models = 2.38241 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 2.38241 Jy ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.705 mas, bpa=-2.731 degrees ! Estimated noise=2.45006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572445 Jy ! Component: 100 - total flux cleaned = 0.0817846 Jy ! Component: 150 - total flux cleaned = 0.0929227 Jy ! Component: 200 - total flux cleaned = 0.0970208 Jy ! Total flux subtracted in 200 components = 0.0970208 Jy ! Clean residual min=-0.009950 max=0.010090 Jy/beam ! Clean residual mean=0.000009 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 2.47943 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 63 components and 2.47943 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=16.58 mas, bpa=1.346 degrees ! Estimated noise=3.25704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00497347 Jy ! Component: 100 - total flux cleaned = 0.00524521 Jy ! Component: 150 - total flux cleaned = 0.0054996 Jy ! Component: 200 - total flux cleaned = 0.00573262 Jy ! Total flux subtracted in 200 components = 0.00573262 Jy ! Clean residual min=-0.009876 max=0.009715 Jy/beam ! Clean residual mean=-0.000023 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 2.48516 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 65 components and 2.48516 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.705 mas, bpa=-2.731 degrees ! Estimated noise=2.45006 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027181 Jy ! Component: 100 - total flux cleaned = -0.0022755 Jy ! Component: 150 - total flux cleaned = -0.00187104 Jy ! Component: 200 - total flux cleaned = -0.00161321 Jy ! Total flux subtracted in 200 components = -0.00161321 Jy ! Clean residual min=-0.009324 max=0.009251 Jy/beam ! Clean residual mean=0.000001 rms=0.002583 Jy/beam ! Combined flux in latest and established models = 2.48355 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 2.48355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072555Jy sigma=0.905584 ! Fit after self-cal, rms=0.071933Jy sigma=0.901626 wmodel J1507-1652_S_2006_12_18_yyk\_map.mod ! Writing 71 model components to file: J1507-1652_S_2006_12_18_yyk_map.mod wobs J1507-1652_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1507-1652_S_2006_12_18_yyk_uvs.fits wwins J1507-1652_S_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J1507-1652_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121937 Jy ! Component: 100 - total flux cleaned = 0.00214476 Jy ! Component: 150 - total flux cleaned = 0.00330478 Jy ! Component: 200 - total flux cleaned = 0.00466923 Jy ! Component: 250 - total flux cleaned = 0.00544431 Jy ! Component: 300 - total flux cleaned = 0.00605886 Jy ! Component: 350 - total flux cleaned = 0.00699886 Jy ! Component: 400 - total flux cleaned = 0.00756004 Jy ! Component: 450 - total flux cleaned = 0.00831633 Jy ! Component: 500 - total flux cleaned = 0.00883919 Jy ! Component: 550 - total flux cleaned = 0.00924401 Jy ! Component: 600 - total flux cleaned = 0.00953688 Jy ! Component: 650 - total flux cleaned = 0.00991706 Jy ! Component: 700 - total flux cleaned = 0.0101952 Jy ! Component: 750 - total flux cleaned = 0.0106431 Jy ! Component: 800 - total flux cleaned = 0.0109046 Jy ! Component: 850 - total flux cleaned = 0.0112417 Jy ! Component: 900 - total flux cleaned = 0.0117359 Jy ! Component: 950 - total flux cleaned = 0.0119779 Jy ! Component: 1000 - total flux cleaned = 0.0122138 Jy ! Component: 1050 - total flux cleaned = 0.0122905 Jy ! Component: 1100 - total flux cleaned = 0.012292 Jy ! Component: 1150 - total flux cleaned = 0.0124375 Jy ! Component: 1200 - total flux cleaned = 0.0126506 Jy ! Component: 1250 - total flux cleaned = 0.0128587 Jy ! Component: 1300 - total flux cleaned = 0.0129957 Jy ! Component: 1350 - total flux cleaned = 0.013198 Jy ! Component: 1400 - total flux cleaned = 0.0133297 Jy ! Component: 1450 - total flux cleaned = 0.0135881 Jy ! Component: 1500 - total flux cleaned = 0.0137146 Jy ! Component: 1550 - total flux cleaned = 0.013902 Jy ! Component: 1600 - total flux cleaned = 0.0141473 Jy ! Component: 1650 - total flux cleaned = 0.0142671 Jy ! Component: 1700 - total flux cleaned = 0.0143864 Jy ! Component: 1750 - total flux cleaned = 0.014446 Jy ! Component: 1800 - total flux cleaned = 0.0145614 Jy ! Component: 1850 - total flux cleaned = 0.0145621 Jy ! Component: 1900 - total flux cleaned = 0.0145626 Jy ! Component: 1950 - total flux cleaned = 0.0146741 Jy ! Component: 2000 - total flux cleaned = 0.0147282 Jy ! Total flux subtracted in 2048 components = 0.0145649 Jy ! Clean residual min=-0.003630 max=0.002762 Jy/beam ! Clean residual mean=-0.000013 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 2.49812 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 187 components and 2.49811 Jy ![Exited script file: muppet] wmap "J1507-1652_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.705 at -2.731 degrees (North through East) ! Clean map min=-0.0060128 max=1.8256 Jy/beam ! Writing clean map to FITS file: J1507-1652_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.82556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000988721 device "J1507-1652_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1507-1652_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.16248 0.16248 0.32496 0.64992 1.29984 2.59968 5.19936 10.3987 20.7974 41.5949 83.1898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.825 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.705 at -2.731 degrees (North through East) ! Clean map min=-0.0060128 max=1.8256 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1507-1652_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1507-1652_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1507-1652_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:45:48 2008