! Started logfile: J1333-2356_X_2006_12_18_yyk_uvs.log on Mon Jun 16 19:41:00 2008 obs J1333-2356_X_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1333-2356_X_2006_12_18_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.685185 visibilities/baseline/integration-bin. ! Found source: J1333-2356 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2161 lines of history. ! ! Reading 2220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1333-2356_X_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.216035 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6501 mas, bmaj=1.728 mas, bpa=-0.5536 degrees ! Estimated noise=1.49763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16568 Jy ! Component: 100 - total flux cleaned = 0.197075 Jy ! Total flux subtracted in 100 components = 0.197075 Jy ! Clean residual min=-0.008663 max=0.012347 Jy/beam ! Clean residual mean=-0.000019 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.197075 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.197075 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.084775Jy sigma=1.207309 ! Fit after self-cal, rms=0.084721Jy sigma=1.202930 ! Inverting map and beam ! Estimated beam: bmin=0.6501 mas, bmaj=1.728 mas, bpa=-0.5536 degrees ! Estimated noise=1.49763 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.111 mas, bpa=-0.01526 degrees ! Estimated noise=0.957117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169539 Jy ! Component: 100 - total flux cleaned = 0.0220974 Jy ! Component: 150 - total flux cleaned = 0.0234201 Jy ! Component: 200 - total flux cleaned = 0.0236283 Jy ! Total flux subtracted in 200 components = 0.0236283 Jy ! Clean residual min=-0.005157 max=0.007528 Jy/beam ! Clean residual mean=-0.000003 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.220703 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.220703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083101Jy sigma=1.161938 ! Fit after self-cal, rms=0.083103Jy sigma=1.161774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.111 at -0.01526 degrees (North through East) ! Clean map min=-0.0050514 max=0.20137 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.97428 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.27 KP 1.02 ! LA 0.99 MK 1.01 NL 1.03 OV 0.96 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991212 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.27 KP 0.94 ! LA 0.96 MK 0.95 NL 1.03 OV 0.97 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.997357 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.13 KP 0.84 ! LA 0.96 MK 0.99 NL 1.04 OV 0.98 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.999034 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.00 KP 0.85 ! LA 0.91 MK 1.10 NL 0.98 OV 1.01 ! PT 1.12 SC 0.97 ! ! ! Fit before self-cal, rms=0.083103Jy sigma=1.161774 ! Fit after self-cal, rms=0.081539Jy sigma=1.117856 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081539Jy sigma=1.117856 ! Fit after self-cal, rms=0.081529Jy sigma=1.117817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8334 mas, bmaj=2.107 mas, bpa=0.637 degrees ! Estimated noise=0.933618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423359 Jy ! Component: 100 - total flux cleaned = -0.00440835 Jy ! Component: 150 - total flux cleaned = -0.00457094 Jy ! Component: 200 - total flux cleaned = -0.00469717 Jy ! Total flux subtracted in 200 components = -0.00469717 Jy ! Clean residual min=-0.003859 max=0.005515 Jy/beam ! Clean residual mean=-0.000015 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.216006 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.216006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081269Jy sigma=1.114652 ! Fit after self-cal, rms=0.081266Jy sigma=1.114527 ! Inverting map ! Added new window around map position (1.8, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509238 Jy ! Component: 100 - total flux cleaned = 0.00441118 Jy ! Component: 150 - total flux cleaned = 0.00380388 Jy ! Component: 200 - total flux cleaned = 0.00343797 Jy ! Total flux subtracted in 200 components = 0.00343797 Jy ! Clean residual min=-0.003318 max=0.003149 Jy/beam ! Clean residual mean=-0.000010 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.219444 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.219444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080874Jy sigma=1.108443 ! Fit after self-cal, rms=0.080801Jy sigma=1.108019 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080801Jy sigma=1.108019 ! Fit after self-cal, rms=0.066967Jy sigma=0.937185 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169973 Jy ! Component: 100 - total flux cleaned = 0.0016806 Jy ! Component: 150 - total flux cleaned = 0.00181876 Jy ! Component: 200 - total flux cleaned = 0.00182257 Jy ! Total flux subtracted in 200 components = 0.00182257 Jy ! Clean residual min=-0.003335 max=0.003173 Jy/beam ! Clean residual mean=-0.000009 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.221267 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.221267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066763Jy sigma=0.933462 ! Fit after self-cal, rms=0.065706Jy sigma=0.924549 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8334 x 2.107 at 0.637 degrees (North through East) ! Clean map min=-0.0030651 max=0.20192 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065706Jy sigma=0.924549 ! Fit after self-cal, rms=0.065009Jy sigma=0.910948 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065009Jy sigma=0.910948 ! Fit after self-cal, rms=0.064936Jy sigma=0.910274 ! Inverting map and beam ! Estimated beam: bmin=0.8267 mas, bmaj=2.097 mas, bpa=1.01 degrees ! Estimated noise=0.928363 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209938 Jy ! Component: 100 - total flux cleaned = 0.00249216 Jy ! Component: 150 - total flux cleaned = 0.00253035 Jy ! Component: 200 - total flux cleaned = 0.00256451 Jy ! Total flux subtracted in 200 components = 0.00256451 Jy ! Clean residual min=-0.002797 max=0.002921 Jy/beam ! Clean residual mean=-0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.223831 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.223831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064828Jy sigma=0.909095 ! Fit after self-cal, rms=0.064823Jy sigma=0.908928 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064823Jy sigma=0.908928 ! Fit after self-cal, rms=0.064044Jy sigma=0.886855 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064044Jy sigma=0.886855 ! Fit after self-cal, rms=0.064052Jy sigma=0.886820 ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.095 mas, bpa=1.051 degrees ! Estimated noise=0.929455 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114651 Jy ! Component: 100 - total flux cleaned = 0.00132914 Jy ! Component: 150 - total flux cleaned = 0.00133038 Jy ! Component: 200 - total flux cleaned = 0.00130367 Jy ! Total flux subtracted in 200 components = 0.00130367 Jy ! Clean residual min=-0.002796 max=0.002930 Jy/beam ! Clean residual mean=0.000001 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.225135 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.225135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064005Jy sigma=0.886242 ! Fit after self-cal, rms=0.064004Jy sigma=0.886194 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=5.485 mas, bpa=1.966 degrees ! Estimated noise=1.22458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165399 Jy ! Component: 100 - total flux cleaned = 0.000165298 Jy ! Component: 150 - total flux cleaned = 0.000145083 Jy ! Component: 200 - total flux cleaned = 0.000127519 Jy ! Total flux subtracted in 200 components = 0.000127519 Jy ! Clean residual min=-0.003386 max=0.002844 Jy/beam ! Clean residual mean=-0.000001 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.225262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.225262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064001Jy sigma=0.886097 ! Fit after self-cal, rms=0.063997Jy sigma=0.886047 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6487 mas, bmaj=1.716 mas, bpa=-0.06337 degrees ! Estimated noise=1.48148 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168664 Jy ! Component: 100 - total flux cleaned = 0.200619 Jy ! Component: 150 - total flux cleaned = 0.212367 Jy ! Component: 200 - total flux cleaned = 0.219168 Jy ! Total flux subtracted in 200 components = 0.219168 Jy ! Clean residual min=-0.004906 max=0.004613 Jy/beam ! Clean residual mean=-0.000002 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.219168 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.219168 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.095 mas, bpa=1.051 degrees ! Estimated noise=0.929455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434268 Jy ! Component: 100 - total flux cleaned = 0.00613999 Jy ! Component: 150 - total flux cleaned = 0.00648546 Jy ! Component: 200 - total flux cleaned = 0.00653313 Jy ! Total flux subtracted in 200 components = 0.00653313 Jy ! Clean residual min=-0.003015 max=0.003018 Jy/beam ! Clean residual mean=0.000002 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.225701 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.225701 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=5.485 mas, bpa=1.966 degrees ! Estimated noise=1.22458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194417 Jy ! Component: 100 - total flux cleaned = -0.000197014 Jy ! Component: 150 - total flux cleaned = -0.000199192 Jy ! Component: 200 - total flux cleaned = -0.000222154 Jy ! Total flux subtracted in 200 components = -0.000222154 Jy ! Clean residual min=-0.003490 max=0.002912 Jy/beam ! Clean residual mean=-0.000000 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.225479 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.225479 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.095 mas, bpa=1.051 degrees ! Estimated noise=0.929455 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178616 Jy ! Component: 100 - total flux cleaned = 9.39107e-05 Jy ! Component: 150 - total flux cleaned = 9.33415e-05 Jy ! Component: 200 - total flux cleaned = 5.62165e-05 Jy ! Total flux subtracted in 200 components = 5.62165e-05 Jy ! Clean residual min=-0.002873 max=0.002946 Jy/beam ! Clean residual mean=0.000001 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.225535 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.225535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064112Jy sigma=0.887063 ! Fit after self-cal, rms=0.064100Jy sigma=0.887008 wmodel J1333-2356_X_2006_12_18_yyk\_map.mod ! Writing 57 model components to file: J1333-2356_X_2006_12_18_yyk_map.mod wobs J1333-2356_X_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1333-2356_X_2006_12_18_yyk_uvs.fits wwins J1333-2356_X_2006_12_18_yyk\_map.win ! wwins: Wrote 2 windows to J1333-2356_X_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000463927 Jy ! Component: 100 - total flux cleaned = -0.000370011 Jy ! Component: 150 - total flux cleaned = -9.93649e-05 Jy ! Component: 200 - total flux cleaned = 7.17947e-05 Jy ! Component: 250 - total flux cleaned = 0.00019598 Jy ! Component: 300 - total flux cleaned = 0.000276759 Jy ! Component: 350 - total flux cleaned = 0.000354276 Jy ! Component: 400 - total flux cleaned = 0.000354147 Jy ! Component: 450 - total flux cleaned = 0.000354411 Jy ! Component: 500 - total flux cleaned = 0.000318814 Jy ! Component: 550 - total flux cleaned = 0.000318693 Jy ! Component: 600 - total flux cleaned = 0.000250632 Jy ! Component: 650 - total flux cleaned = 0.000251208 Jy ! Component: 700 - total flux cleaned = 0.000219166 Jy ! Component: 750 - total flux cleaned = 0.000250342 Jy ! Component: 800 - total flux cleaned = 0.000187264 Jy ! Component: 850 - total flux cleaned = 0.000126462 Jy ! Component: 900 - total flux cleaned = 9.65826e-05 Jy ! Component: 950 - total flux cleaned = 8.77829e-06 Jy ! Component: 1000 - total flux cleaned = -0.000105935 Jy ! Component: 1050 - total flux cleaned = -0.000218894 Jy ! Component: 1100 - total flux cleaned = -0.000329376 Jy ! Component: 1150 - total flux cleaned = -0.000519441 Jy ! Component: 1200 - total flux cleaned = -0.000706167 Jy ! Component: 1250 - total flux cleaned = -0.000915982 Jy ! Component: 1300 - total flux cleaned = -0.000941225 Jy ! Component: 1350 - total flux cleaned = -0.000966997 Jy ! Component: 1400 - total flux cleaned = -0.00111758 Jy ! Component: 1450 - total flux cleaned = -0.00114225 Jy ! Component: 1500 - total flux cleaned = -0.00124058 Jy ! Component: 1550 - total flux cleaned = -0.00133702 Jy ! Component: 1600 - total flux cleaned = -0.00136113 Jy ! Component: 1650 - total flux cleaned = -0.00150358 Jy ! Component: 1700 - total flux cleaned = -0.00159718 Jy ! Component: 1750 - total flux cleaned = -0.00162041 Jy ! Component: 1800 - total flux cleaned = -0.00180303 Jy ! Component: 1850 - total flux cleaned = -0.0017582 Jy ! Component: 1900 - total flux cleaned = -0.00182525 Jy ! Component: 1950 - total flux cleaned = -0.00193557 Jy ! Component: 2000 - total flux cleaned = -0.00197941 Jy ! Total flux subtracted in 2048 components = -0.00204406 Jy ! Clean residual min=-0.001509 max=0.001326 Jy/beam ! Clean residual mean=-0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.223491 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 199 components and 0.223491 Jy ![Exited script file: muppet] wmap "J1333-2356_X_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.095 at 1.051 degrees (North through East) ! Clean map min=-0.0024185 max=0.20006 Jy/beam ! Writing clean map to FITS file: J1333-2356_X_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.200061 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000391264 device "J1333-2356_X_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1333-2356_X_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.586718 0.586718 1.17344 2.34687 4.69374 9.38749 18.775 37.5499 75.0999 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.2 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.095 at 1.051 degrees (North through East) ! Clean map min=-0.0024185 max=0.20006 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1333-2356_X_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1333-2356_X_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1333-2356_X_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:41:06 2008