! Started logfile: J1325-1117_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:40:19 2008 obs J1325-1117_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1325-1117_S_2006_12_18_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1325-1117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 2016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1325-1117_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.175575 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.493 mas, bpa=-2.559 degrees ! Estimated noise=1.33516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131527 Jy ! Component: 100 - total flux cleaned = 0.158836 Jy ! Total flux subtracted in 100 components = 0.158836 Jy ! Clean residual min=-0.005559 max=0.009268 Jy/beam ! Clean residual mean=0.000005 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.158836 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.158836 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.079716Jy sigma=1.069848 ! Fit after self-cal, rms=0.079588Jy sigma=1.065575 ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.493 mas, bpa=-2.559 degrees ! Estimated noise=1.33516 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.795 mas, bpa=-3.735 degrees ! Estimated noise=0.971486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133564 Jy ! Component: 100 - total flux cleaned = 0.0187284 Jy ! Component: 150 - total flux cleaned = 0.0211636 Jy ! Component: 200 - total flux cleaned = 0.0218557 Jy ! Total flux subtracted in 200 components = 0.0218557 Jy ! Clean residual min=-0.006238 max=0.005488 Jy/beam ! Clean residual mean=-0.000051 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.180692 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.180692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078297Jy sigma=1.036612 ! Fit after self-cal, rms=0.078268Jy sigma=1.036529 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 7.795 at -3.735 degrees (North through East) ! Clean map min=-0.0059669 max=0.15426 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02702 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.93 KP 0.94 ! LA 1.03 MK 0.99 NL 0.99 OV 0.95 ! PT 1.02 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99829 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.01 KP 0.96 ! LA 1.00 MK 1.07 NL 0.99 OV 0.99 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976397 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 0.96 KP 0.96 ! LA 1.05 MK 1.02 NL 1.05 OV 1.03 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.078268Jy sigma=1.036529 ! Fit after self-cal, rms=0.077550Jy sigma=1.027203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077550Jy sigma=1.027203 ! Fit after self-cal, rms=0.077550Jy sigma=1.027197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=7.763 mas, bpa=-2.881 degrees ! Estimated noise=0.974736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206241 Jy ! Component: 100 - total flux cleaned = 0.0021654 Jy ! Component: 150 - total flux cleaned = 0.00219476 Jy ! Component: 200 - total flux cleaned = 0.00219512 Jy ! Total flux subtracted in 200 components = 0.00219512 Jy ! Clean residual min=-0.004081 max=0.003508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.182887 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.182887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077532Jy sigma=1.026320 ! Fit after self-cal, rms=0.077508Jy sigma=1.026262 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077508Jy sigma=1.026262 ! Fit after self-cal, rms=0.072402Jy sigma=0.962147 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090253 Jy ! Component: 100 - total flux cleaned = 0.000907214 Jy ! Component: 150 - total flux cleaned = 0.000907901 Jy ! Component: 200 - total flux cleaned = 0.000884444 Jy ! Total flux subtracted in 200 components = 0.000884444 Jy ! Clean residual min=-0.003797 max=0.003175 Jy/beam ! Clean residual mean=-0.000002 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.183771 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.183771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072379Jy sigma=0.961667 ! Fit after self-cal, rms=0.071874Jy sigma=0.957508 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.05 x 7.763 at -2.881 degrees (North through East) ! Clean map min=-0.0036264 max=0.15622 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071874Jy sigma=0.957508 ! Fit after self-cal, rms=0.070914Jy sigma=0.943940 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070914Jy sigma=0.943940 ! Fit after self-cal, rms=0.070864Jy sigma=0.943432 ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=7.712 mas, bpa=-2.798 degrees ! Estimated noise=0.970001 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106224 Jy ! Component: 100 - total flux cleaned = 0.000194455 Jy ! Component: 150 - total flux cleaned = 0.000213179 Jy ! Component: 200 - total flux cleaned = 0.000230012 Jy ! Total flux subtracted in 200 components = 0.000230012 Jy ! Clean residual min=-0.002756 max=0.002864 Jy/beam ! Clean residual mean=0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.184001 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.184001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070867Jy sigma=0.943248 ! Fit after self-cal, rms=0.070861Jy sigma=0.943140 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070861Jy sigma=0.943140 ! Fit after self-cal, rms=0.071298Jy sigma=0.937855 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071298Jy sigma=0.937855 ! Fit after self-cal, rms=0.071311Jy sigma=0.937762 ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.675 mas, bpa=-2.225 degrees ! Estimated noise=0.97222 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.82475e-05 Jy ! Component: 100 - total flux cleaned = 2.96944e-05 Jy ! Component: 150 - total flux cleaned = -1.88491e-05 Jy ! Component: 200 - total flux cleaned = -3.90541e-05 Jy ! Total flux subtracted in 200 components = -3.90541e-05 Jy ! Clean residual min=-0.003092 max=0.003047 Jy/beam ! Clean residual mean=0.000031 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.183962 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.183962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071282Jy sigma=0.937310 ! Fit after self-cal, rms=0.071286Jy sigma=0.937288 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.37 mas, bmaj=14.99 mas, bpa=0.3902 degrees ! Estimated noise=1.26786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457397 Jy ! Component: 100 - total flux cleaned = 0.000324604 Jy ! Component: 150 - total flux cleaned = 0.000296864 Jy ! Component: 200 - total flux cleaned = 0.000295361 Jy ! Total flux subtracted in 200 components = 0.000295361 Jy ! Clean residual min=-0.003033 max=0.002901 Jy/beam ! Clean residual mean=0.000067 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.184258 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.184258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071264Jy sigma=0.937662 ! Fit after self-cal, rms=0.071262Jy sigma=0.937570 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.45 mas, bmaj=6.467 mas, bpa=-1.856 degrees ! Estimated noise=1.32553 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.133401 Jy ! Component: 100 - total flux cleaned = 0.162157 Jy ! Component: 150 - total flux cleaned = 0.172646 Jy ! Component: 200 - total flux cleaned = 0.177957 Jy ! Total flux subtracted in 200 components = 0.177957 Jy ! Clean residual min=-0.004783 max=0.004580 Jy/beam ! Clean residual mean=0.000012 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.177957 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.177957 Jy ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.675 mas, bpa=-2.225 degrees ! Estimated noise=0.97222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037118 Jy ! Component: 100 - total flux cleaned = 0.00505247 Jy ! Component: 150 - total flux cleaned = 0.00535827 Jy ! Component: 200 - total flux cleaned = 0.0054017 Jy ! Total flux subtracted in 200 components = 0.0054017 Jy ! Clean residual min=-0.003074 max=0.002990 Jy/beam ! Clean residual mean=0.000033 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.183359 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.183359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.37 mas, bmaj=14.99 mas, bpa=0.3902 degrees ! Estimated noise=1.26786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621585 Jy ! Component: 100 - total flux cleaned = 0.000628946 Jy ! Component: 150 - total flux cleaned = 0.000666314 Jy ! Component: 200 - total flux cleaned = 0.000695416 Jy ! Total flux subtracted in 200 components = 0.000695416 Jy ! Clean residual min=-0.003019 max=0.002875 Jy/beam ! Clean residual mean=0.000069 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.184055 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.184055 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.675 mas, bpa=-2.225 degrees ! Estimated noise=0.97222 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000476331 Jy ! Component: 100 - total flux cleaned = -0.000392852 Jy ! Component: 150 - total flux cleaned = -0.00031469 Jy ! Component: 200 - total flux cleaned = -0.000296062 Jy ! Total flux subtracted in 200 components = -0.000296062 Jy ! Clean residual min=-0.003042 max=0.003038 Jy/beam ! Clean residual mean=0.000031 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.183759 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.183758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071303Jy sigma=0.937377 ! Fit after self-cal, rms=0.071299Jy sigma=0.937330 wmodel J1325-1117_S_2006_12_18_yyk\_map.mod ! Writing 76 model components to file: J1325-1117_S_2006_12_18_yyk_map.mod wobs J1325-1117_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1325-1117_S_2006_12_18_yyk_uvs.fits wwins J1325-1117_S_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J1325-1117_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359386 Jy ! Component: 100 - total flux cleaned = -0.000508575 Jy ! Component: 150 - total flux cleaned = -0.000327543 Jy ! Component: 200 - total flux cleaned = -6.5097e-05 Jy ! Component: 250 - total flux cleaned = -2.29768e-05 Jy ! Component: 300 - total flux cleaned = 9.95399e-05 Jy ! Component: 350 - total flux cleaned = 9.97532e-05 Jy ! Component: 400 - total flux cleaned = 2.28922e-05 Jy ! Component: 450 - total flux cleaned = -1.42728e-05 Jy ! Component: 500 - total flux cleaned = -4.99469e-05 Jy ! Component: 550 - total flux cleaned = 5.55242e-05 Jy ! Component: 600 - total flux cleaned = 0.000192262 Jy ! Component: 650 - total flux cleaned = 0.000258572 Jy ! Component: 700 - total flux cleaned = 0.000422447 Jy ! Component: 750 - total flux cleaned = 0.000486649 Jy ! Component: 800 - total flux cleaned = 0.00058228 Jy ! Component: 850 - total flux cleaned = 0.000707244 Jy ! Component: 900 - total flux cleaned = 0.000798968 Jy ! Component: 950 - total flux cleaned = 0.000889837 Jy ! Component: 1000 - total flux cleaned = 0.00097915 Jy ! Component: 1050 - total flux cleaned = 0.00109542 Jy ! Component: 1100 - total flux cleaned = 0.00120983 Jy ! Component: 1150 - total flux cleaned = 0.00121002 Jy ! Component: 1200 - total flux cleaned = 0.00134909 Jy ! Component: 1250 - total flux cleaned = 0.00145836 Jy ! Component: 1300 - total flux cleaned = 0.00153964 Jy ! Component: 1350 - total flux cleaned = 0.00161965 Jy ! Component: 1400 - total flux cleaned = 0.00175031 Jy ! Component: 1450 - total flux cleaned = 0.00190525 Jy ! Component: 1500 - total flux cleaned = 0.00203257 Jy ! Component: 1550 - total flux cleaned = 0.00220825 Jy ! Component: 1600 - total flux cleaned = 0.00233227 Jy ! Component: 1650 - total flux cleaned = 0.00255244 Jy ! Component: 1700 - total flux cleaned = 0.00267312 Jy ! Component: 1750 - total flux cleaned = 0.00281618 Jy ! Component: 1800 - total flux cleaned = 0.00291069 Jy ! Component: 1850 - total flux cleaned = 0.00302721 Jy ! Component: 1900 - total flux cleaned = 0.00309617 Jy ! Component: 1950 - total flux cleaned = 0.00316464 Jy ! Component: 2000 - total flux cleaned = 0.00323233 Jy ! Total flux subtracted in 2048 components = 0.00329948 Jy ! Clean residual min=-0.001366 max=0.001191 Jy/beam ! Clean residual mean=0.000026 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.187058 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 203 components and 0.187058 Jy ![Exited script file: muppet] wmap "J1325-1117_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 7.675 at -2.225 degrees (North through East) ! Clean map min=-0.0021624 max=0.15601 Jy/beam ! Writing clean map to FITS file: J1325-1117_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156009 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000445155 device "J1325-1117_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1325-1117_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.856019 0.856019 1.71204 3.42407 6.84815 13.6963 27.3926 54.7852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 7.675 at -2.225 degrees (North through East) ! Clean map min=-0.0021624 max=0.15601 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1325-1117_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1325-1117_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1325-1117_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:40:24 2008