! Started logfile: J1325-0804_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:40:12 2008 obs J1325-0804_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1325-0804_X_2007_01_11_yyk_uve.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.888889 visibilities/baseline/integration-bin. ! Found source: J1325-0804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 2048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1325-0804_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.168363 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6787 mas, bmaj=1.726 mas, bpa=0.9168 degrees ! Estimated noise=1.47619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113672 Jy ! Component: 100 - total flux cleaned = 0.143501 Jy ! Total flux subtracted in 100 components = 0.143501 Jy ! Clean residual min=-0.007632 max=0.009428 Jy/beam ! Clean residual mean=0.000028 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.143501 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.143501 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.094507Jy sigma=1.176874 ! Fit after self-cal, rms=0.094353Jy sigma=1.172430 ! Inverting map and beam ! Estimated beam: bmin=0.6787 mas, bmaj=1.726 mas, bpa=0.9168 degrees ! Estimated noise=1.47619 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8397 mas, bmaj=2.028 mas, bpa=-0.8404 degrees ! Estimated noise=0.941144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174141 Jy ! Component: 100 - total flux cleaned = 0.0241165 Jy ! Component: 150 - total flux cleaned = 0.0273719 Jy ! Component: 200 - total flux cleaned = 0.0290721 Jy ! Total flux subtracted in 200 components = 0.0290721 Jy ! Clean residual min=-0.004575 max=0.006045 Jy/beam ! Clean residual mean=0.000054 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.172573 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.172573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092277Jy sigma=1.125848 ! Fit after self-cal, rms=0.092240Jy sigma=1.125403 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8397 x 2.028 at -0.8404 degrees (North through East) ! Clean map min=-0.0043962 max=0.13661 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00949 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.04 KP 0.99 ! LA 0.97 MK 0.98 OV 0.96 PT 0.92 ! SC 1.06 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00858 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.03 KP 0.96 ! LA 0.93 MK 1.03 OV 0.95 PT 1.08 ! SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00996 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.96 KP 0.87 ! LA 0.92 MK 1.03 OV 1.03 PT 1.08 ! SC 0.91 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990769 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 0.94 KP 0.98 ! LA 0.93 MK 0.97 OV 1.02 PT 1.11 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.092240Jy sigma=1.125403 ! Fit after self-cal, rms=0.091619Jy sigma=1.110831 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091619Jy sigma=1.110831 ! Fit after self-cal, rms=0.091628Jy sigma=1.110741 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8411 mas, bmaj=2.028 mas, bpa=-0.608 degrees ! Estimated noise=0.945907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169432 Jy ! Component: 100 - total flux cleaned = 0.00189848 Jy ! Component: 150 - total flux cleaned = 0.00200958 Jy ! Component: 200 - total flux cleaned = 0.00201022 Jy ! Total flux subtracted in 200 components = 0.00201022 Jy ! Clean residual min=-0.004126 max=0.005780 Jy/beam ! Clean residual mean=0.000047 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.174583 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.174583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091622Jy sigma=1.110133 ! Fit after self-cal, rms=0.091603Jy sigma=1.110019 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091603Jy sigma=1.110019 ! Fit after self-cal, rms=0.082467Jy sigma=0.965444 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741916 Jy ! Component: 100 - total flux cleaned = 0.0114441 Jy ! Component: 150 - total flux cleaned = 0.0126996 Jy ! Component: 200 - total flux cleaned = 0.0136207 Jy ! Total flux subtracted in 200 components = 0.0136207 Jy ! Clean residual min=-0.003711 max=0.003721 Jy/beam ! Clean residual mean=0.000024 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.188204 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.188204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081864Jy sigma=0.953075 ! Fit after self-cal, rms=0.080979Jy sigma=0.944406 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8411 x 2.028 at -0.608 degrees (North through East) ! Clean map min=-0.0035159 max=0.14137 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080979Jy sigma=0.944406 ! Fit after self-cal, rms=0.080398Jy sigma=0.935957 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080398Jy sigma=0.935957 ! Fit after self-cal, rms=0.080326Jy sigma=0.934831 ! Inverting map and beam ! Estimated beam: bmin=0.8383 mas, bmaj=2.014 mas, bpa=-0.3187 degrees ! Estimated noise=0.936671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222593 Jy ! Component: 100 - total flux cleaned = 0.00251703 Jy ! Component: 150 - total flux cleaned = 0.00276246 Jy ! Component: 200 - total flux cleaned = 0.00292996 Jy ! Total flux subtracted in 200 components = 0.00292996 Jy ! Clean residual min=-0.003308 max=0.003151 Jy/beam ! Clean residual mean=-0.000004 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.191134 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.191134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080231Jy sigma=0.933222 ! Fit after self-cal, rms=0.080240Jy sigma=0.932893 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080240Jy sigma=0.932893 ! Fit after self-cal, rms=0.079804Jy sigma=0.927260 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079804Jy sigma=0.927260 ! Fit after self-cal, rms=0.079808Jy sigma=0.927075 ! Inverting map and beam ! Estimated beam: bmin=0.831 mas, bmaj=2.004 mas, bpa=-0.4309 degrees ! Estimated noise=0.934934 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920317 Jy ! Component: 100 - total flux cleaned = 0.00105171 Jy ! Component: 150 - total flux cleaned = 0.00123897 Jy ! Component: 200 - total flux cleaned = 0.00137269 Jy ! Total flux subtracted in 200 components = 0.00137269 Jy ! Clean residual min=-0.003398 max=0.003028 Jy/beam ! Clean residual mean=-0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.192507 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.192507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079750Jy sigma=0.926354 ! Fit after self-cal, rms=0.079763Jy sigma=0.926291 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.978 mas, bpa=15.64 degrees ! Estimated noise=1.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386473 Jy ! Component: 100 - total flux cleaned = 0.000293385 Jy ! Component: 150 - total flux cleaned = 0.000215053 Jy ! Component: 200 - total flux cleaned = 0.000143857 Jy ! Total flux subtracted in 200 components = 0.000143857 Jy ! Clean residual min=-0.003584 max=0.003409 Jy/beam ! Clean residual mean=-0.000003 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.192651 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.192651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079755Jy sigma=0.926311 ! Fit after self-cal, rms=0.079764Jy sigma=0.926270 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6735 mas, bmaj=1.714 mas, bpa=1.025 degrees ! Estimated noise=1.46329 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117521 Jy ! Component: 100 - total flux cleaned = 0.149634 Jy ! Component: 150 - total flux cleaned = 0.163618 Jy ! Component: 200 - total flux cleaned = 0.17155 Jy ! Total flux subtracted in 200 components = 0.17155 Jy ! Clean residual min=-0.005064 max=0.004851 Jy/beam ! Clean residual mean=0.000011 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.17155 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.17155 Jy ! Inverting map and beam ! Estimated beam: bmin=0.831 mas, bmaj=2.004 mas, bpa=-0.4309 degrees ! Estimated noise=0.934934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789841 Jy ! Component: 100 - total flux cleaned = 0.0127389 Jy ! Component: 150 - total flux cleaned = 0.0159065 Jy ! Component: 200 - total flux cleaned = 0.0171814 Jy ! Total flux subtracted in 200 components = 0.0171814 Jy ! Clean residual min=-0.003610 max=0.003127 Jy/beam ! Clean residual mean=0.000008 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.188732 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.188732 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.978 mas, bpa=15.64 degrees ! Estimated noise=1.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253841 Jy ! Component: 100 - total flux cleaned = 0.00296026 Jy ! Component: 150 - total flux cleaned = 0.00322685 Jy ! Component: 200 - total flux cleaned = 0.00326496 Jy ! Total flux subtracted in 200 components = 0.00326496 Jy ! Clean residual min=-0.003548 max=0.003333 Jy/beam ! Clean residual mean=0.000001 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.191997 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 0.191997 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.831 mas, bmaj=2.004 mas, bpa=-0.4309 degrees ! Estimated noise=0.934934 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.31262e-05 Jy ! Component: 100 - total flux cleaned = 0.000253383 Jy ! Component: 150 - total flux cleaned = 0.000336381 Jy ! Component: 200 - total flux cleaned = 0.000373254 Jy ! Total flux subtracted in 200 components = 0.000373254 Jy ! Clean residual min=-0.003425 max=0.002995 Jy/beam ! Clean residual mean=-0.000001 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.19237 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 0.19237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079758Jy sigma=0.926771 ! Fit after self-cal, rms=0.079764Jy sigma=0.926588 wmodel J1325-0804_X_2007_01_11_yyk\_map.mod ! Writing 101 model components to file: J1325-0804_X_2007_01_11_yyk_map.mod wobs J1325-0804_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1325-0804_X_2007_01_11_yyk_uvs.fits wwins J1325-0804_X_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J1325-0804_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461624 Jy ! Component: 100 - total flux cleaned = -0.000407975 Jy ! Component: 150 - total flux cleaned = -0.000261862 Jy ! Component: 200 - total flux cleaned = -0.000171477 Jy ! Component: 250 - total flux cleaned = -0.000129689 Jy ! Component: 300 - total flux cleaned = -0.00017217 Jy ! Component: 350 - total flux cleaned = -9.48799e-06 Jy ! Component: 400 - total flux cleaned = 0.000146493 Jy ! Component: 450 - total flux cleaned = 0.000335076 Jy ! Component: 500 - total flux cleaned = 0.000519952 Jy ! Component: 550 - total flux cleaned = 0.000700022 Jy ! Component: 600 - total flux cleaned = 0.00094555 Jy ! Component: 650 - total flux cleaned = 0.00115122 Jy ! Component: 700 - total flux cleaned = 0.00121884 Jy ! Component: 750 - total flux cleaned = 0.00135067 Jy ! Component: 800 - total flux cleaned = 0.00135073 Jy ! Component: 850 - total flux cleaned = 0.00135057 Jy ! Component: 900 - total flux cleaned = 0.00138162 Jy ! Component: 950 - total flux cleaned = 0.00144268 Jy ! Component: 1000 - total flux cleaned = 0.00144256 Jy ! Component: 1050 - total flux cleaned = 0.00156051 Jy ! Component: 1100 - total flux cleaned = 0.0017048 Jy ! Component: 1150 - total flux cleaned = 0.00170479 Jy ! Component: 1200 - total flux cleaned = 0.0018728 Jy ! Component: 1250 - total flux cleaned = 0.00192759 Jy ! Component: 1300 - total flux cleaned = 0.00195541 Jy ! Component: 1350 - total flux cleaned = 0.00211601 Jy ! Component: 1400 - total flux cleaned = 0.00219465 Jy ! Component: 1450 - total flux cleaned = 0.00229792 Jy ! Component: 1500 - total flux cleaned = 0.00234893 Jy ! Component: 1550 - total flux cleaned = 0.00242483 Jy ! Component: 1600 - total flux cleaned = 0.00250003 Jy ! Component: 1650 - total flux cleaned = 0.00254969 Jy ! Component: 1700 - total flux cleaned = 0.00269574 Jy ! Component: 1750 - total flux cleaned = 0.00274375 Jy ! Component: 1800 - total flux cleaned = 0.00286292 Jy ! Component: 1850 - total flux cleaned = 0.00302732 Jy ! Component: 1900 - total flux cleaned = 0.0030974 Jy ! Component: 1950 - total flux cleaned = 0.00323519 Jy ! Component: 2000 - total flux cleaned = 0.00334896 Jy ! Total flux subtracted in 2048 components = 0.00334926 Jy ! Clean residual min=-0.001360 max=0.001344 Jy/beam ! Clean residual mean=0.000004 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.195719 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 236 components and 0.195719 Jy ![Exited script file: muppet] wmap "J1325-0804_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.831 x 2.004 at -0.4309 degrees (North through East) ! Clean map min=-0.0023269 max=0.14065 Jy/beam ! Writing clean map to FITS file: J1325-0804_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140652 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413371 device "J1325-0804_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1325-0804_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.881686 0.881686 1.76337 3.52675 7.05349 14.107 28.214 56.4279 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.831 x 2.004 at -0.4309 degrees (North through East) ! Clean map min=-0.0023269 max=0.14065 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1325-0804_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1325-0804_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1325-0804_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:40:18 2008