! Started logfile: J1213-1658_X_2006_12_18_yyk_uvs.log on Mon Jun 16 19:36:51 2008 obs J1213-1658_X_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1213-1658_X_2006_12_18_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.552778 visibilities/baseline/integration-bin. ! Found source: J1213-1658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2161 lines of history. ! ! Reading 1592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1213-1658_X_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0940699 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9166 mas, bmaj=3.794 mas, bpa=-15.38 degrees ! Estimated noise=1.85674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381724 Jy ! Component: 100 - total flux cleaned = 0.0395309 Jy ! Total flux subtracted in 100 components = 0.0395309 Jy ! Clean residual min=-0.011403 max=0.011045 Jy/beam ! Clean residual mean=-0.000040 rms=0.003318 Jy/beam ! Combined flux in latest and established models = 0.0395309 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0395309 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.080079Jy sigma=1.300295 ! Fit after self-cal, rms=0.078361Jy sigma=1.267565 ! Inverting map and beam ! Estimated beam: bmin=0.9162 mas, bmaj=3.794 mas, bpa=-15.4 degrees ! Estimated noise=1.85646 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=4.769 mas, bpa=-12.85 degrees ! Estimated noise=1.23764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182474 Jy ! Component: 100 - total flux cleaned = 0.0258758 Jy ! Component: 150 - total flux cleaned = 0.0299601 Jy ! Component: 200 - total flux cleaned = 0.030835 Jy ! Total flux subtracted in 200 components = 0.030835 Jy ! Clean residual min=-0.006185 max=0.006998 Jy/beam ! Clean residual mean=-0.000018 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.0703659 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.0703659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076033Jy sigma=1.204995 ! Fit after self-cal, rms=0.075355Jy sigma=1.190458 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 4.769 at -12.85 degrees (North through East) ! Clean map min=-0.0063384 max=0.057244 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.075355Jy sigma=1.190458 ! Fit after self-cal, rms=0.075132Jy sigma=1.189812 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075132Jy sigma=1.189812 ! Fit after self-cal, rms=0.075115Jy sigma=1.189484 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=4.774 mas, bpa=-12.82 degrees ! Estimated noise=1.23815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255582 Jy ! Component: 100 - total flux cleaned = 0.00304924 Jy ! Component: 150 - total flux cleaned = 0.00338808 Jy ! Component: 200 - total flux cleaned = 0.00368928 Jy ! Total flux subtracted in 200 components = 0.00368928 Jy ! Clean residual min=-0.006452 max=0.006722 Jy/beam ! Clean residual mean=-0.000009 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.0740552 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0740552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074877Jy sigma=1.186144 ! Fit after self-cal, rms=0.074912Jy sigma=1.186027 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074912Jy sigma=1.186027 ! Fit after self-cal, rms=0.066431Jy sigma=1.052135 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674982 Jy ! Component: 100 - total flux cleaned = 0.00715495 Jy ! Component: 150 - total flux cleaned = 0.00726583 Jy ! Component: 200 - total flux cleaned = 0.00731741 Jy ! Total flux subtracted in 200 components = 0.00731741 Jy ! Clean residual min=-0.005291 max=0.005532 Jy/beam ! Clean residual mean=-0.000012 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.0813726 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0813726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065796Jy sigma=1.040154 ! Fit after self-cal, rms=0.064990Jy sigma=1.029917 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 4.774 at -12.82 degrees (North through East) ! Clean map min=-0.0050908 max=0.064832 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.216 mas, bmaj=6.108 mas, bpa=-4.216 degrees ! Estimated noise=1.39617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194788 Jy ! Component: 100 - total flux cleaned = 0.00214357 Jy ! Component: 150 - total flux cleaned = 0.00221535 Jy ! Component: 200 - total flux cleaned = 0.002281 Jy ! Total flux subtracted in 200 components = 0.002281 Jy ! Clean residual min=-0.005925 max=0.005524 Jy/beam ! Clean residual mean=-0.000019 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.0836536 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.0836536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064957Jy sigma=1.029547 ! Fit after self-cal, rms=0.064884Jy sigma=1.028475 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9159 mas, bmaj=3.787 mas, bpa=-15.45 degrees ! Estimated noise=1.86137 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541678 Jy ! Component: 100 - total flux cleaned = 0.0668261 Jy ! Component: 150 - total flux cleaned = 0.0716033 Jy ! Component: 200 - total flux cleaned = 0.0742447 Jy ! Total flux subtracted in 200 components = 0.0742447 Jy ! Clean residual min=-0.008110 max=0.008013 Jy/beam ! Clean residual mean=-0.000008 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 0.0742446 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0742446 Jy ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=4.774 mas, bpa=-12.82 degrees ! Estimated noise=1.23815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521003 Jy ! Component: 100 - total flux cleaned = 0.00631412 Jy ! Component: 150 - total flux cleaned = 0.00657252 Jy ! Component: 200 - total flux cleaned = 0.00680949 Jy ! Total flux subtracted in 200 components = 0.00680949 Jy ! Clean residual min=-0.005326 max=0.005465 Jy/beam ! Clean residual mean=-0.000015 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.0810541 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.0810541 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.216 mas, bmaj=6.108 mas, bpa=-4.216 degrees ! Estimated noise=1.39617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200366 Jy ! Component: 100 - total flux cleaned = 0.00211882 Jy ! Component: 150 - total flux cleaned = 0.00222192 Jy ! Component: 200 - total flux cleaned = 0.00235758 Jy ! Total flux subtracted in 200 components = 0.00235758 Jy ! Clean residual min=-0.005953 max=0.005637 Jy/beam ! Clean residual mean=-0.000019 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.0834117 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0834117 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=4.774 mas, bpa=-12.82 degrees ! Estimated noise=1.23815 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133381 Jy ! Component: 100 - total flux cleaned = -0.00153544 Jy ! Component: 150 - total flux cleaned = -0.00147775 Jy ! Component: 200 - total flux cleaned = -0.00142055 Jy ! Total flux subtracted in 200 components = -0.00142055 Jy ! Clean residual min=-0.005160 max=0.005396 Jy/beam ! Clean residual mean=-0.000012 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.0819912 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0819912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064889Jy sigma=1.028744 ! Fit after self-cal, rms=0.064801Jy sigma=1.028282 wmodel J1213-1658_X_2006_12_18_yyk\_map.mod ! Writing 46 model components to file: J1213-1658_X_2006_12_18_yyk_map.mod wobs J1213-1658_X_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1213-1658_X_2006_12_18_yyk_uvs.fits wwins J1213-1658_X_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J1213-1658_X_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.34686e-06 Jy ! Component: 100 - total flux cleaned = -1.15418e-05 Jy ! Component: 150 - total flux cleaned = 0.000473793 Jy ! Component: 200 - total flux cleaned = 0.00123869 Jy ! Component: 250 - total flux cleaned = 0.00160141 Jy ! Component: 300 - total flux cleaned = 0.00146384 Jy ! Component: 350 - total flux cleaned = 0.00159922 Jy ! Component: 400 - total flux cleaned = 0.00179079 Jy ! Component: 450 - total flux cleaned = 0.00191481 Jy ! Component: 500 - total flux cleaned = 0.00227639 Jy ! Component: 550 - total flux cleaned = 0.00279988 Jy ! Component: 600 - total flux cleaned = 0.00342225 Jy ! Component: 650 - total flux cleaned = 0.00419186 Jy ! Component: 700 - total flux cleaned = 0.00488674 Jy ! Component: 750 - total flux cleaned = 0.00551295 Jy ! Component: 800 - total flux cleaned = 0.00628086 Jy ! Component: 850 - total flux cleaned = 0.0069309 Jy ! Component: 900 - total flux cleaned = 0.00761552 Jy ! Component: 950 - total flux cleaned = 0.00833319 Jy ! Component: 1000 - total flux cleaned = 0.00894253 Jy ! Component: 1050 - total flux cleaned = 0.00958722 Jy ! Component: 1100 - total flux cleaned = 0.0103083 Jy ! Component: 1150 - total flux cleaned = 0.0110169 Jy ! Component: 1200 - total flux cleaned = 0.0115821 Jy ! Component: 1250 - total flux cleaned = 0.0121803 Jy ! Component: 1300 - total flux cleaned = 0.0127256 Jy ! Component: 1350 - total flux cleaned = 0.0131382 Jy ! Component: 1400 - total flux cleaned = 0.0136258 Jy ! Component: 1450 - total flux cleaned = 0.0141856 Jy ! Component: 1500 - total flux cleaned = 0.0146973 Jy ! Component: 1550 - total flux cleaned = 0.0152409 Jy ! Component: 1600 - total flux cleaned = 0.0157376 Jy ! Component: 1650 - total flux cleaned = 0.0162274 Jy ! Component: 1700 - total flux cleaned = 0.0167844 Jy ! Component: 1750 - total flux cleaned = 0.0171877 Jy ! Component: 1800 - total flux cleaned = 0.017514 Jy ! Component: 1850 - total flux cleaned = 0.0179075 Jy ! Component: 1900 - total flux cleaned = 0.0180132 Jy ! Component: 1950 - total flux cleaned = 0.0182585 Jy ! Component: 2000 - total flux cleaned = 0.0184311 Jy ! Total flux subtracted in 2048 components = 0.0186024 Jy ! Clean residual min=-0.002096 max=0.002482 Jy/beam ! Clean residual mean=-0.000010 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.100594 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 162 components and 0.100594 Jy ![Exited script file: muppet] wmap "J1213-1658_X_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 4.774 at -12.82 degrees (North through East) ! Clean map min=-0.0029148 max=0.064712 Jy/beam ! Writing clean map to FITS file: J1213-1658_X_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0647125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000679117 device "J1213-1658_X_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1213-1658_X_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.14831 3.14831 6.29663 12.5933 25.1865 50.373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 4.774 at -12.82 degrees (North through East) ! Clean map min=-0.0029148 max=0.064712 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1213-1658_X_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1213-1658_X_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1213-1658_X_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:36:56 2008