! Started logfile: J1127-1857_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:33:58 2008 obs J1127-1857_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J1127-1857_S_2006_12_18_yyk_uve.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1127-1857_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.058 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.268 mas, bpa=3.859 degrees ! Estimated noise=3.2718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.894647 Jy ! Component: 100 - total flux cleaned = 1.03157 Jy ! Total flux subtracted in 100 components = 1.03157 Jy ! Clean residual min=-0.025489 max=0.039767 Jy/beam ! Clean residual mean=0.000169 rms=0.007839 Jy/beam ! Combined flux in latest and established models = 1.03157 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.03157 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.120737Jy sigma=1.629660 ! Fit after self-cal, rms=0.120303Jy sigma=1.623091 ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.268 mas, bpa=3.859 degrees ! Estimated noise=3.2718 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.953 mas, bpa=1.854 degrees ! Estimated noise=2.42205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514555 Jy ! Component: 100 - total flux cleaned = 0.069138 Jy ! Component: 150 - total flux cleaned = 0.0767724 Jy ! Component: 200 - total flux cleaned = 0.0787881 Jy ! Total flux subtracted in 200 components = 0.0787881 Jy ! Clean residual min=-0.021911 max=0.014964 Jy/beam ! Clean residual mean=-0.000390 rms=0.005408 Jy/beam ! Combined flux in latest and established models = 1.11036 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 40 components and 1.11036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107244Jy sigma=1.404453 ! Fit after self-cal, rms=0.107231Jy sigma=1.404274 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.128 x 7.953 at 1.854 degrees (North through East) ! Clean map min=-0.02105 max=1.0442 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01977 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.96 KP 0.93 ! LA 1.07 MK 0.99 NL 0.98 OV 0.96 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.998551 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.02 KP 0.99 ! LA 1.02 MK 1.02 NL 1.01 OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.975376 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.01 KP 0.96 ! LA 1.01 MK 1.00 NL 1.08 OV 1.02 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00768 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.98 KP 0.95 ! LA 1.00 MK 1.03 NL 1.00 OV 0.98 ! PT 0.93 SC 1.06 ! ! ! Fit before self-cal, rms=0.107231Jy sigma=1.404274 ! Fit after self-cal, rms=0.092540Jy sigma=1.155524 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092540Jy sigma=1.155524 ! Fit after self-cal, rms=0.092530Jy sigma=1.155502 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=8.012 mas, bpa=1.95 degrees ! Estimated noise=2.41987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781512 Jy ! Component: 100 - total flux cleaned = -0.000784273 Jy ! Component: 150 - total flux cleaned = -0.00084935 Jy ! Component: 200 - total flux cleaned = -0.000845263 Jy ! Total flux subtracted in 200 components = -0.000845263 Jy ! Clean residual min=-0.009193 max=0.008183 Jy/beam ! Clean residual mean=0.000227 rms=0.002437 Jy/beam ! Combined flux in latest and established models = 1.10952 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 1.10951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092491Jy sigma=1.154302 ! Fit after self-cal, rms=0.092483Jy sigma=1.154262 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092483Jy sigma=1.154262 ! Fit after self-cal, rms=0.086517Jy sigma=1.073200 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.3063e-05 Jy ! Component: 100 - total flux cleaned = 2.92895e-05 Jy ! Component: 150 - total flux cleaned = 2.49755e-05 Jy ! Component: 200 - total flux cleaned = 2.4226e-05 Jy ! Total flux subtracted in 200 components = 2.4226e-05 Jy ! Clean residual min=-0.009024 max=0.007911 Jy/beam ! Clean residual mean=0.000229 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 1.10954 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 1.10954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086450Jy sigma=1.072490 ! Fit after self-cal, rms=0.085932Jy sigma=1.066596 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.138 x 8.012 at 1.95 degrees (North through East) ! Clean map min=-0.0087974 max=1.0456 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085932Jy sigma=1.066596 ! Fit after self-cal, rms=0.078349Jy sigma=0.939471 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078349Jy sigma=0.939471 ! Fit after self-cal, rms=0.078295Jy sigma=0.939025 ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=8.032 mas, bpa=1.89 degrees ! Estimated noise=2.4196 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475399 Jy ! Component: 100 - total flux cleaned = -0.000430112 Jy ! Component: 150 - total flux cleaned = -0.000348556 Jy ! Component: 200 - total flux cleaned = -0.000347568 Jy ! Total flux subtracted in 200 components = -0.000347568 Jy ! Clean residual min=-0.008731 max=0.006994 Jy/beam ! Clean residual mean=0.000190 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 1.10919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 1.10919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078253Jy sigma=0.938418 ! Fit after self-cal, rms=0.078241Jy sigma=0.938372 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078241Jy sigma=0.938372 ! Fit after self-cal, rms=0.077382Jy sigma=0.925001 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077382Jy sigma=0.925001 ! Fit after self-cal, rms=0.077383Jy sigma=0.925005 ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.039 mas, bpa=1.852 degrees ! Estimated noise=2.41983 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307097 Jy ! Component: 100 - total flux cleaned = -0.000347939 Jy ! Component: 150 - total flux cleaned = -0.000383563 Jy ! Component: 200 - total flux cleaned = -0.000416379 Jy ! Total flux subtracted in 200 components = -0.000416379 Jy ! Clean residual min=-0.008702 max=0.007085 Jy/beam ! Clean residual mean=0.000185 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 1.10878 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 1.10878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077367Jy sigma=0.924615 ! Fit after self-cal, rms=0.077364Jy sigma=0.924607 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.614 mas, bmaj=18.59 mas, bpa=6.324 degrees ! Estimated noise=3.07305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365774 Jy ! Component: 100 - total flux cleaned = 0.000440307 Jy ! Component: 150 - total flux cleaned = 0.000506381 Jy ! Component: 200 - total flux cleaned = 0.000565783 Jy ! Total flux subtracted in 200 components = 0.000565783 Jy ! Clean residual min=-0.008636 max=0.006227 Jy/beam ! Clean residual mean=0.000378 rms=0.002296 Jy/beam ! Combined flux in latest and established models = 1.10934 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 1.10934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077397Jy sigma=0.924695 ! Fit after self-cal, rms=0.077376Jy sigma=0.924632 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=6.311 mas, bpa=3.867 degrees ! Estimated noise=3.2671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.893943 Jy ! Component: 100 - total flux cleaned = 1.02753 Jy ! Component: 150 - total flux cleaned = 1.06672 Jy ! Component: 200 - total flux cleaned = 1.08478 Jy ! Total flux subtracted in 200 components = 1.08478 Jy ! Clean residual min=-0.012087 max=0.012468 Jy/beam ! Clean residual mean=0.000195 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 1.08478 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.08478 Jy ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.039 mas, bpa=1.852 degrees ! Estimated noise=2.41983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143028 Jy ! Component: 100 - total flux cleaned = 0.019144 Jy ! Component: 150 - total flux cleaned = 0.0211674 Jy ! Component: 200 - total flux cleaned = 0.0219741 Jy ! Total flux subtracted in 200 components = 0.0219741 Jy ! Clean residual min=-0.008707 max=0.006960 Jy/beam ! Clean residual mean=0.000199 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 1.10675 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 1.10675 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.614 mas, bmaj=18.59 mas, bpa=6.324 degrees ! Estimated noise=3.07305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136269 Jy ! Component: 100 - total flux cleaned = 0.00149289 Jy ! Component: 150 - total flux cleaned = 0.00161053 Jy ! Component: 200 - total flux cleaned = 0.00175381 Jy ! Total flux subtracted in 200 components = 0.00175381 Jy ! Clean residual min=-0.008595 max=0.006418 Jy/beam ! Clean residual mean=0.000389 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 1.10851 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 1.10851 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.039 mas, bpa=1.852 degrees ! Estimated noise=2.41983 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573195 Jy ! Component: 100 - total flux cleaned = -0.000618636 Jy ! Component: 150 - total flux cleaned = -0.000638294 Jy ! Component: 200 - total flux cleaned = -0.000638819 Jy ! Total flux subtracted in 200 components = -0.000638819 Jy ! Clean residual min=-0.008737 max=0.007041 Jy/beam ! Clean residual mean=0.000192 rms=0.002055 Jy/beam ! Combined flux in latest and established models = 1.10787 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 1.10787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077288Jy sigma=0.923337 ! Fit after self-cal, rms=0.077287Jy sigma=0.923326 wmodel J1127-1857_S_2006_12_18_yyk\_map.mod ! Writing 64 model components to file: J1127-1857_S_2006_12_18_yyk_map.mod wobs J1127-1857_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J1127-1857_S_2006_12_18_yyk_uvs.fits wwins J1127-1857_S_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029636 Jy ! Component: 100 - total flux cleaned = -0.00382696 Jy ! Component: 150 - total flux cleaned = -0.00450525 Jy ! Component: 200 - total flux cleaned = -0.00503905 Jy ! Component: 250 - total flux cleaned = -0.00574703 Jy ! Component: 300 - total flux cleaned = -0.0061316 Jy ! Component: 350 - total flux cleaned = -0.00604292 Jy ! Component: 400 - total flux cleaned = -0.00569186 Jy ! Component: 450 - total flux cleaned = -0.00535036 Jy ! Component: 500 - total flux cleaned = -0.00485302 Jy ! Component: 550 - total flux cleaned = -0.0045311 Jy ! Component: 600 - total flux cleaned = -0.00414016 Jy ! Component: 650 - total flux cleaned = -0.00383512 Jy ! Component: 700 - total flux cleaned = -0.00368626 Jy ! Component: 750 - total flux cleaned = -0.00339548 Jy ! Component: 800 - total flux cleaned = -0.00311302 Jy ! Component: 850 - total flux cleaned = -0.00290521 Jy ! Component: 900 - total flux cleaned = -0.00270352 Jy ! Component: 950 - total flux cleaned = -0.00257273 Jy ! Component: 1000 - total flux cleaned = -0.00237977 Jy ! Component: 1050 - total flux cleaned = -0.00231692 Jy ! Component: 1100 - total flux cleaned = -0.00213155 Jy ! Component: 1150 - total flux cleaned = -0.00231549 Jy ! Component: 1200 - total flux cleaned = -0.00231494 Jy ! Component: 1250 - total flux cleaned = -0.00237229 Jy ! Component: 1300 - total flux cleaned = -0.0024867 Jy ! Component: 1350 - total flux cleaned = -0.00271161 Jy ! Component: 1400 - total flux cleaned = -0.00271249 Jy ! Component: 1450 - total flux cleaned = -0.00271244 Jy ! Component: 1500 - total flux cleaned = -0.00281995 Jy ! Component: 1550 - total flux cleaned = -0.00297826 Jy ! Component: 1600 - total flux cleaned = -0.00318551 Jy ! Component: 1650 - total flux cleaned = -0.00344204 Jy ! Component: 1700 - total flux cleaned = -0.00374492 Jy ! Component: 1750 - total flux cleaned = -0.00414253 Jy ! Component: 1800 - total flux cleaned = -0.00448589 Jy ! Component: 1850 - total flux cleaned = -0.00467882 Jy ! Component: 1900 - total flux cleaned = -0.00487066 Jy ! Component: 1950 - total flux cleaned = -0.00520185 Jy ! Component: 2000 - total flux cleaned = -0.00552774 Jy ! Total flux subtracted in 2048 components = -0.00571162 Jy ! Clean residual min=-0.003444 max=0.002929 Jy/beam ! Clean residual mean=0.000030 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 1.10216 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 173 components and 1.10216 Jy ![Exited script file: muppet] wmap "J1127-1857_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.039 at 1.852 degrees (North through East) ! Clean map min=-0.0058359 max=1.0465 Jy/beam ! Writing clean map to FITS file: J1127-1857_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000864656 device "J1127-1857_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.247862 0.247862 0.495724 0.991449 1.9829 3.9658 7.93159 15.8632 31.7264 63.4527 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.039 at 1.852 degrees (North through East) ! Clean map min=-0.0058359 max=1.0465 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:34:03 2008