! Started logfile: J1048-1909_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:32:00 2008 obs J1048-1909_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1048-1909_S_2007_01_11_yyk_uve.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.708333 visibilities/baseline/integration-bin. ! Found source: J1048-1909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1048-1909_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.668368 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=6.514 mas, bpa=4.18 degrees ! Estimated noise=2.57069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.551955 Jy ! Component: 100 - total flux cleaned = 0.665246 Jy ! Total flux subtracted in 100 components = 0.665246 Jy ! Clean residual min=-0.026582 max=0.043655 Jy/beam ! Clean residual mean=-0.000029 rms=0.008676 Jy/beam ! Combined flux in latest and established models = 0.665246 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.665246 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.125577Jy sigma=1.599956 ! Fit after self-cal, rms=0.123078Jy sigma=1.575951 ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=6.514 mas, bpa=4.18 degrees ! Estimated noise=2.57069 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.614 mas, bpa=2.812 degrees ! Estimated noise=2.07638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536947 Jy ! Component: 100 - total flux cleaned = 0.0776748 Jy ! Component: 150 - total flux cleaned = 0.0895301 Jy ! Component: 200 - total flux cleaned = 0.0926489 Jy ! Total flux subtracted in 200 components = 0.0926489 Jy ! Clean residual min=-0.015898 max=0.034322 Jy/beam ! Clean residual mean=-0.000364 rms=0.005936 Jy/beam ! Combined flux in latest and established models = 0.757895 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.757895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107058Jy sigma=1.311357 ! Fit after self-cal, rms=0.106162Jy sigma=1.305528 ! Inverting map ! Added new window around map position (4.5, -6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354397 Jy ! Component: 100 - total flux cleaned = 0.0406396 Jy ! Component: 150 - total flux cleaned = 0.0406138 Jy ! Component: 200 - total flux cleaned = 0.0408976 Jy ! Total flux subtracted in 200 components = 0.0408976 Jy ! Clean residual min=-0.012141 max=0.012500 Jy/beam ! Clean residual mean=-0.000507 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 0.798793 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.798793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097291Jy sigma=1.167699 ! Fit after self-cal, rms=0.096605Jy sigma=1.158949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.614 at 2.812 degrees (North through East) ! Clean map min=-0.012617 max=0.62856 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0222 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.95 KP 0.95 ! LA 1.05 MK 0.95 OV 0.98 PT 1.03 ! SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992521 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.06 KP 0.99 ! LA 1.00 MK 1.01 OV 1.02 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.982425 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.01 KP 0.97 ! LA 1.06 MK 0.98 OV 1.03 PT 1.04 ! SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01962 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.97 KP 0.92 ! LA 1.04 MK 0.99 OV 0.96 PT 0.95 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.096605Jy sigma=1.158949 ! Fit after self-cal, rms=0.090397Jy sigma=1.073747 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090397Jy sigma=1.073747 ! Fit after self-cal, rms=0.090397Jy sigma=1.073724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.584 mas, bpa=2.801 degrees ! Estimated noise=2.07492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550032 Jy ! Component: 100 - total flux cleaned = 0.00590746 Jy ! Component: 150 - total flux cleaned = 0.00606548 Jy ! Component: 200 - total flux cleaned = 0.00620068 Jy ! Total flux subtracted in 200 components = 0.00620068 Jy ! Clean residual min=-0.008127 max=0.006934 Jy/beam ! Clean residual mean=-0.000044 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 0.804993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 0.804993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089404Jy sigma=1.062857 ! Fit after self-cal, rms=0.089307Jy sigma=1.062115 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089307Jy sigma=1.062115 ! Fit after self-cal, rms=0.084624Jy sigma=0.987877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105817 Jy ! Component: 100 - total flux cleaned = 0.0013174 Jy ! Component: 150 - total flux cleaned = 0.00142586 Jy ! Component: 200 - total flux cleaned = 0.0014318 Jy ! Total flux subtracted in 200 components = 0.0014318 Jy ! Clean residual min=-0.007436 max=0.007167 Jy/beam ! Clean residual mean=-0.000036 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.806425 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.806425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084306Jy sigma=0.983655 ! Fit after self-cal, rms=0.083845Jy sigma=0.977171 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.867 x 7.584 at 2.801 degrees (North through East) ! Clean map min=-0.0099282 max=0.62969 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083845Jy sigma=0.977171 ! Fit after self-cal, rms=0.079798Jy sigma=0.922082 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079798Jy sigma=0.922082 ! Fit after self-cal, rms=0.079752Jy sigma=0.921478 ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.597 mas, bpa=2.714 degrees ! Estimated noise=2.07019 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.55633e-05 Jy ! Component: 100 - total flux cleaned = -0.000292322 Jy ! Component: 150 - total flux cleaned = -0.000388961 Jy ! Component: 200 - total flux cleaned = -0.000476322 Jy ! Total flux subtracted in 200 components = -0.000476322 Jy ! Clean residual min=-0.007130 max=0.006984 Jy/beam ! Clean residual mean=-0.000058 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.805949 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.805948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079456Jy sigma=0.917844 ! Fit after self-cal, rms=0.079392Jy sigma=0.917238 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079392Jy sigma=0.917238 ! Fit after self-cal, rms=0.078106Jy sigma=0.898558 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078106Jy sigma=0.898558 ! Fit after self-cal, rms=0.078107Jy sigma=0.898538 ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.605 mas, bpa=2.577 degrees ! Estimated noise=2.07113 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811187 Jy ! Component: 100 - total flux cleaned = 0.000433742 Jy ! Component: 150 - total flux cleaned = 0.000354128 Jy ! Component: 200 - total flux cleaned = 0.000356011 Jy ! Total flux subtracted in 200 components = 0.000356011 Jy ! Clean residual min=-0.006726 max=0.006599 Jy/beam ! Clean residual mean=-0.000065 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 0.806305 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.806304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077881Jy sigma=0.895778 ! Fit after self-cal, rms=0.077838Jy sigma=0.895296 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=18.33 mas, bpa=13.95 degrees ! Estimated noise=2.75634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394551 Jy ! Component: 100 - total flux cleaned = 0.0004987 Jy ! Component: 150 - total flux cleaned = 0.000671825 Jy ! Component: 200 - total flux cleaned = 0.000670648 Jy ! Total flux subtracted in 200 components = 0.000670648 Jy ! Clean residual min=-0.007760 max=0.006678 Jy/beam ! Clean residual mean=-0.000176 rms=0.002656 Jy/beam ! Combined flux in latest and established models = 0.806975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 129 components and 0.806975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077780Jy sigma=0.894558 ! Fit after self-cal, rms=0.077745Jy sigma=0.894100 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=6.508 mas, bpa=3.951 degrees ! Estimated noise=2.54711 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.547662 Jy ! Component: 100 - total flux cleaned = 0.662059 Jy ! Component: 150 - total flux cleaned = 0.714195 Jy ! Component: 200 - total flux cleaned = 0.744449 Jy ! Total flux subtracted in 200 components = 0.744449 Jy ! Clean residual min=-0.012253 max=0.013006 Jy/beam ! Clean residual mean=0.000047 rms=0.003740 Jy/beam ! Combined flux in latest and established models = 0.744449 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.744449 Jy ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.605 mas, bpa=2.577 degrees ! Estimated noise=2.07113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255575 Jy ! Component: 100 - total flux cleaned = 0.040017 Jy ! Component: 150 - total flux cleaned = 0.0490128 Jy ! Component: 200 - total flux cleaned = 0.0522873 Jy ! Total flux subtracted in 200 components = 0.0522873 Jy ! Clean residual min=-0.008312 max=0.006434 Jy/beam ! Clean residual mean=-0.000066 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.796736 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 89 components and 0.796736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=18.33 mas, bpa=13.95 degrees ! Estimated noise=2.75634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056168 Jy ! Component: 100 - total flux cleaned = 0.0068583 Jy ! Component: 150 - total flux cleaned = 0.00733644 Jy ! Component: 200 - total flux cleaned = 0.00750337 Jy ! Total flux subtracted in 200 components = 0.00750337 Jy ! Clean residual min=-0.008332 max=0.006144 Jy/beam ! Clean residual mean=-0.000189 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 0.80424 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.80424 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.605 mas, bpa=2.577 degrees ! Estimated noise=2.07113 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171419 Jy ! Component: 100 - total flux cleaned = -0.00170569 Jy ! Component: 150 - total flux cleaned = -0.00156815 Jy ! Component: 200 - total flux cleaned = -0.00144671 Jy ! Total flux subtracted in 200 components = -0.00144671 Jy ! Clean residual min=-0.007468 max=0.006571 Jy/beam ! Clean residual mean=-0.000076 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.802793 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.802793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078043Jy sigma=0.898167 ! Fit after self-cal, rms=0.077957Jy sigma=0.896880 wmodel J1048-1909_S_2007_01_11_yyk\_map.mod ! Writing 114 model components to file: J1048-1909_S_2007_01_11_yyk_map.mod wobs J1048-1909_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1048-1909_S_2007_01_11_yyk_uvs.fits wwins J1048-1909_S_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J1048-1909_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116823 Jy ! Component: 100 - total flux cleaned = -0.00248127 Jy ! Component: 150 - total flux cleaned = -0.00348048 Jy ! Component: 200 - total flux cleaned = -0.00394132 Jy ! Component: 250 - total flux cleaned = -0.00447212 Jy ! Component: 300 - total flux cleaned = -0.00472351 Jy ! Component: 350 - total flux cleaned = -0.00480401 Jy ! Component: 400 - total flux cleaned = -0.0048053 Jy ! Component: 450 - total flux cleaned = -0.00488267 Jy ! Component: 500 - total flux cleaned = -0.00495576 Jy ! Component: 550 - total flux cleaned = -0.00502316 Jy ! Component: 600 - total flux cleaned = -0.00502306 Jy ! Component: 650 - total flux cleaned = -0.00495986 Jy ! Component: 700 - total flux cleaned = -0.00502225 Jy ! Component: 750 - total flux cleaned = -0.00477951 Jy ! Component: 800 - total flux cleaned = -0.00466007 Jy ! Component: 850 - total flux cleaned = -0.00459991 Jy ! Component: 900 - total flux cleaned = -0.00487839 Jy ! Component: 950 - total flux cleaned = -0.00487907 Jy ! Component: 1000 - total flux cleaned = -0.00519779 Jy ! Component: 1050 - total flux cleaned = -0.00535223 Jy ! Component: 1100 - total flux cleaned = -0.00555569 Jy ! Component: 1150 - total flux cleaned = -0.00580442 Jy ! Component: 1200 - total flux cleaned = -0.00604735 Jy ! Component: 1250 - total flux cleaned = -0.00623613 Jy ! Component: 1300 - total flux cleaned = -0.00637557 Jy ! Component: 1350 - total flux cleaned = -0.00655797 Jy ! Component: 1400 - total flux cleaned = -0.00655811 Jy ! Component: 1450 - total flux cleaned = -0.00664663 Jy ! Component: 1500 - total flux cleaned = -0.00673292 Jy ! Component: 1550 - total flux cleaned = -0.00664827 Jy ! Component: 1600 - total flux cleaned = -0.00677339 Jy ! Component: 1650 - total flux cleaned = -0.00673217 Jy ! Component: 1700 - total flux cleaned = -0.0067321 Jy ! Component: 1750 - total flux cleaned = -0.00677203 Jy ! Component: 1800 - total flux cleaned = -0.00673315 Jy ! Component: 1850 - total flux cleaned = -0.00673322 Jy ! Component: 1900 - total flux cleaned = -0.00669542 Jy ! Component: 1950 - total flux cleaned = -0.00676971 Jy ! Component: 2000 - total flux cleaned = -0.00662277 Jy ! Total flux subtracted in 2048 components = -0.00658661 Jy ! Clean residual min=-0.002469 max=0.002331 Jy/beam ! Clean residual mean=0.000030 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.796206 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 251 components and 0.796206 Jy ![Exited script file: muppet] wmap "J1048-1909_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.861 x 7.605 at 2.577 degrees (North through East) ! Clean map min=-0.0052132 max=0.63688 Jy/beam ! Writing clean map to FITS file: J1048-1909_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.636883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000713127 device "J1048-1909_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1048-1909_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.335914 0.335914 0.671828 1.34366 2.68731 5.37463 10.7493 21.4985 42.997 85.994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.636 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.861 x 7.605 at 2.577 degrees (North through East) ! Clean map min=-0.0052132 max=0.63688 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1048-1909_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1048-1909_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1048-1909_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:32:06 2008