! Started logfile: J1048-1909_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:31:54 2008
obs J1048-1909_S_2006_12_18_yyk_uve.fits
! Reading UV FITS file: J1048-1909_S_2006_12_18_yyk_uve.fits
! AN table 1: 6 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.581481 visibilities/baseline/integration-bin.
! Found source: J1048-1909
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2469 lines of history.
! 
! Reading 628 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1048-1909_S_2006_12_18_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.642849 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.465 mas, bmaj=6.54 mas, bpa=-1.425 degrees
! Estimated noise=2.83957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.536868 Jy
! Component: 100  -  total flux cleaned = 0.643642 Jy
! Total flux subtracted in 100 components = 0.643642 Jy
! Clean residual min=-0.022282 max=0.045145 Jy/beam
! Clean residual mean=0.000355 rms=0.007872 Jy/beam
! Combined flux in latest and established models = 0.643642 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.643642 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.120622Jy  sigma=1.622109
! Fit after  self-cal, rms=0.118412Jy  sigma=1.594149
! Inverting map and beam 
! Estimated beam: bmin=2.465 mas, bmaj=6.54 mas, bpa=-1.425 degrees
! Estimated noise=2.83957 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=7.674 mas, bpa=-1.667 degrees
! Estimated noise=2.067 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0545614 Jy
! Component: 100  -  total flux cleaned = 0.074431 Jy
! Component: 150  -  total flux cleaned = 0.082158 Jy
! Component: 200  -  total flux cleaned = 0.0832186 Jy
! Total flux subtracted in 200 components = 0.0832186 Jy
! Clean residual min=-0.019924 max=0.033592 Jy/beam
! Clean residual mean=-0.000026 rms=0.006139 Jy/beam
! Combined flux in latest and established models = 0.72686 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 37 components and 0.72686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103543Jy  sigma=1.339821
! Fit after  self-cal, rms=0.103112Jy  sigma=1.336731
! Inverting map 
! Added new window around map position (4.5, -6.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377905 Jy
! Component: 100  -  total flux cleaned = 0.0459937 Jy
! Component: 150  -  total flux cleaned = 0.0472289 Jy
! Component: 200  -  total flux cleaned = 0.0472521 Jy
! Total flux subtracted in 200 components = 0.0472521 Jy
! Clean residual min=-0.015126 max=0.013510 Jy/beam
! Clean residual mean=-0.000208 rms=0.003603 Jy/beam
! Combined flux in latest and established models = 0.774112 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 0.774112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092794Jy  sigma=1.181055
! Fit after  self-cal, rms=0.091970Jy  sigma=1.167919
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.877 x 7.674 at -1.667 degrees (North through East)
! Clean map  min=-0.014414  max=0.62056 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01773
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        0.94     KP        0.94     
!   LA        1.06     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.991401
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00*    HN        1.02     KP        0.97     
!   LA        1.04     MK        1.04     NL        1.02     OV        1.02     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.991443
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.01     KP        0.98     
!   LA        0.98     MK        0.96     NL        1.10     OV        1.01     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00092
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00*    HN        0.99     KP        0.93     
!   LA        0.97     MK        1.04     NL        1.00     OV        1.01     
!   PT        0.93     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.091970Jy  sigma=1.167919
! Fit after  self-cal, rms=0.085098Jy  sigma=1.062449
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085098Jy  sigma=1.062449
! Fit after  self-cal, rms=0.085103Jy  sigma=1.062412
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.871 mas, bmaj=7.663 mas, bpa=-1.392 degrees
! Estimated noise=2.06208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573318 Jy
! Component: 100  -  total flux cleaned = 0.00574543 Jy
! Component: 150  -  total flux cleaned = 0.00545898 Jy
! Component: 200  -  total flux cleaned = 0.00557851 Jy
! Total flux subtracted in 200 components = 0.00557851 Jy
! Clean residual min=-0.008069 max=0.006835 Jy/beam
! Clean residual mean=0.000051 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 0.779691 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.779691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084342Jy  sigma=1.052312
! Fit after  self-cal, rms=0.084265Jy  sigma=1.051774
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084265Jy  sigma=1.051774
! Fit after  self-cal, rms=0.075784Jy  sigma=0.941574
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050571 Jy
! Component: 100  -  total flux cleaned = 0.000220303 Jy
! Component: 150  -  total flux cleaned = 4.60915e-05 Jy
! Component: 200  -  total flux cleaned = -3.30667e-05 Jy
! Total flux subtracted in 200 components = -3.30667e-05 Jy
! Clean residual min=-0.007858 max=0.006581 Jy/beam
! Clean residual mean=0.000051 rms=0.001959 Jy/beam
! Combined flux in latest and established models = 0.779658 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.779658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075562Jy  sigma=0.938641
! Fit after  self-cal, rms=0.074809Jy  sigma=0.931225
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.871 x 7.663 at -1.392 degrees (North through East)
! Clean map  min=-0.0077206  max=0.61877 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074809Jy  sigma=0.931225
! Fit after  self-cal, rms=0.073236Jy  sigma=0.905736
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073236Jy  sigma=0.905736
! Fit after  self-cal, rms=0.073126Jy  sigma=0.904888
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=7.667 mas, bpa=-1.423 degrees
! Estimated noise=2.05991 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172701 Jy
! Component: 100  -  total flux cleaned = 0.00153559 Jy
! Component: 150  -  total flux cleaned = 0.0013722 Jy
! Component: 200  -  total flux cleaned = 0.00130068 Jy
! Total flux subtracted in 200 components = 0.00130068 Jy
! Clean residual min=-0.006730 max=0.006186 Jy/beam
! Clean residual mean=0.000022 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 0.780958 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 117 components and 0.780958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072926Jy  sigma=0.901904
! Fit after  self-cal, rms=0.072851Jy  sigma=0.901498
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072851Jy  sigma=0.901498
! Fit after  self-cal, rms=0.071056Jy  sigma=0.877420
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071056Jy  sigma=0.877420
! Fit after  self-cal, rms=0.071048Jy  sigma=0.877381
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.669 mas, bpa=-1.398 degrees
! Estimated noise=2.06206 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131004 Jy
! Component: 100  -  total flux cleaned = 0.00115368 Jy
! Component: 150  -  total flux cleaned = 0.00115374 Jy
! Component: 200  -  total flux cleaned = 0.00102343 Jy
! Total flux subtracted in 200 components = 0.00102343 Jy
! Clean residual min=-0.006746 max=0.005905 Jy/beam
! Clean residual mean=0.000032 rms=0.001710 Jy/beam
! Combined flux in latest and established models = 0.781982 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 125 components and 0.781982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070884Jy  sigma=0.875249
! Fit after  self-cal, rms=0.070845Jy  sigma=0.875090
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.242 mas, bmaj=16.93 mas, bpa=2.8 degrees
! Estimated noise=2.72778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000549985 Jy
! Component: 100  -  total flux cleaned = -0.000407189 Jy
! Component: 150  -  total flux cleaned = -0.000291002 Jy
! Component: 200  -  total flux cleaned = -0.000292332 Jy
! Total flux subtracted in 200 components = -0.000292332 Jy
! Clean residual min=-0.007070 max=0.006068 Jy/beam
! Clean residual mean=0.000073 rms=0.002159 Jy/beam
! Combined flux in latest and established models = 0.781689 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 132 components and 0.781689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070859Jy  sigma=0.874664
! Fit after  self-cal, rms=0.070813Jy  sigma=0.874397
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.46 mas, bmaj=6.534 mas, bpa=-1.264 degrees
! Estimated noise=2.83061 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.536729 Jy
! Component: 100  -  total flux cleaned = 0.648677 Jy
! Component: 150  -  total flux cleaned = 0.699214 Jy
! Component: 200  -  total flux cleaned = 0.726837 Jy
! Total flux subtracted in 200 components = 0.726837 Jy
! Clean residual min=-0.009854 max=0.012328 Jy/beam
! Clean residual mean=0.000176 rms=0.003080 Jy/beam
! Combined flux in latest and established models = 0.726837 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.726837 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.669 mas, bpa=-1.398 degrees
! Estimated noise=2.06206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233249 Jy
! Component: 100  -  total flux cleaned = 0.0356588 Jy
! Component: 150  -  total flux cleaned = 0.0428068 Jy
! Component: 200  -  total flux cleaned = 0.0470522 Jy
! Total flux subtracted in 200 components = 0.0470522 Jy
! Clean residual min=-0.007047 max=0.006326 Jy/beam
! Clean residual mean=0.000062 rms=0.001831 Jy/beam
! Combined flux in latest and established models = 0.773889 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 64 components and 0.773889 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.242 mas, bmaj=16.93 mas, bpa=2.8 degrees
! Estimated noise=2.72778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413852 Jy
! Component: 100  -  total flux cleaned = 0.00506184 Jy
! Component: 150  -  total flux cleaned = 0.00549863 Jy
! Component: 200  -  total flux cleaned = 0.0058871 Jy
! Total flux subtracted in 200 components = 0.0058871 Jy
! Clean residual min=-0.007768 max=0.005786 Jy/beam
! Clean residual mean=0.000089 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.779776 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.779776 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.669 mas, bpa=-1.398 degrees
! Estimated noise=2.06206 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -1.76174e-05 Jy
! Component: 100  -  total flux cleaned = 8.63891e-05 Jy
! Component: 150  -  total flux cleaned = 8.80735e-05 Jy
! Component: 200  -  total flux cleaned = 0.000162035 Jy
! Total flux subtracted in 200 components = 0.000162035 Jy
! Clean residual min=-0.006771 max=0.006096 Jy/beam
! Clean residual mean=0.000040 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 0.779938 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.779938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070863Jy  sigma=0.875148
! Fit after  self-cal, rms=0.070806Jy  sigma=0.874316
wmodel J1048-1909_S_2006_12_18_yyk\_map.mod
! Writing 94 model components to file: J1048-1909_S_2006_12_18_yyk_map.mod
wobs J1048-1909_S_2006_12_18_yyk\_uvs.fits
! Writing UV FITS file: J1048-1909_S_2006_12_18_yyk_uvs.fits
wwins J1048-1909_S_2006_12_18_yyk\_map.win
! wwins: Wrote 2 windows to J1048-1909_S_2006_12_18_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101392 Jy
! Component: 100  -  total flux cleaned = -0.000428305 Jy
! Component: 150  -  total flux cleaned = 2.45285e-05 Jy
! Component: 200  -  total flux cleaned = 0.000193226 Jy
! Component: 250  -  total flux cleaned = 0.00027544 Jy
! Component: 300  -  total flux cleaned = 0.000353973 Jy
! Component: 350  -  total flux cleaned = 0.000427982 Jy
! Component: 400  -  total flux cleaned = 0.000355865 Jy
! Component: 450  -  total flux cleaned = 0.000356387 Jy
! Component: 500  -  total flux cleaned = 0.000354239 Jy
! Component: 550  -  total flux cleaned = 0.000289254 Jy
! Component: 600  -  total flux cleaned = 0.000288366 Jy
! Component: 650  -  total flux cleaned = 0.00034727 Jy
! Component: 700  -  total flux cleaned = 0.000347335 Jy
! Component: 750  -  total flux cleaned = 0.000403162 Jy
! Component: 800  -  total flux cleaned = 0.000350136 Jy
! Component: 850  -  total flux cleaned = 0.000246532 Jy
! Component: 900  -  total flux cleaned = 9.53607e-05 Jy
! Component: 950  -  total flux cleaned = 4.63065e-05 Jy
! Component: 1000  -  total flux cleaned = -1.54908e-06 Jy
! Component: 1050  -  total flux cleaned = -0.000139955 Jy
! Component: 1100  -  total flux cleaned = -0.000184726 Jy
! Component: 1150  -  total flux cleaned = -0.000404482 Jy
! Component: 1200  -  total flux cleaned = -0.000448611 Jy
! Component: 1250  -  total flux cleaned = -0.000698736 Jy
! Component: 1300  -  total flux cleaned = -0.000779915 Jy
! Component: 1350  -  total flux cleaned = -0.000820766 Jy
! Component: 1400  -  total flux cleaned = -0.00105613 Jy
! Component: 1450  -  total flux cleaned = -0.00117062 Jy
! Component: 1500  -  total flux cleaned = -0.00128293 Jy
! Component: 1550  -  total flux cleaned = -0.00124603 Jy
! Component: 1600  -  total flux cleaned = -0.00135496 Jy
! Component: 1650  -  total flux cleaned = -0.00139091 Jy
! Component: 1700  -  total flux cleaned = -0.00139126 Jy
! Component: 1750  -  total flux cleaned = -0.00135691 Jy
! Component: 1800  -  total flux cleaned = -0.00152496 Jy
! Component: 1850  -  total flux cleaned = -0.0015573 Jy
! Component: 1900  -  total flux cleaned = -0.00158987 Jy
! Component: 1950  -  total flux cleaned = -0.00175001 Jy
! Component: 2000  -  total flux cleaned = -0.00181281 Jy
! Total flux subtracted in 2048 components = -0.0018125 Jy
! Clean residual min=-0.001911 max=0.001581 Jy/beam
! Clean residual mean=-0.000002 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.778125 Jy
keep
! Adding 144 model components to the UV plane model.
! The established model now contains 238 components and 0.778125 Jy
![Exited script file: muppet]
wmap "J1048-1909_S_2006_12_18_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.875 x 7.669 at -1.398 degrees (North through East)
! Clean map  min=-0.0036498  max=0.62093 Jy/beam
! Writing clean map to FITS file: J1048-1909_S_2006_12_18_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.620925 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00061368 
device "J1048-1909_S_2006_12_18_yyk\_map.eps/VPS"
! Attempting to open device: 'J1048-1909_S_2006_12_18_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.296499 0.296499 0.592999 1.186 2.37199 4.74399 9.48798 18.976 37.9519 75.9038
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.62 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.875 x 7.669 at -1.398 degrees (North through East)
! Clean map  min=-0.0036498  max=0.62093 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1048-1909_S_2006_12_18_yyk\_map.gif/gif"
! Attempting to open device: 'J1048-1909_S_2006_12_18_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1048-1909_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:32:00 2008