! Started logfile: J1037-2705_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:31:48 2008 obs J1037-2705_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J1037-2705_X_2007_01_11_yyk_uve.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J1037-2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 1456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1037-2705_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130691 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6181 mas, bmaj=1.673 mas, bpa=2.866 degrees ! Estimated noise=1.91886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883189 Jy ! Component: 100 - total flux cleaned = 0.105289 Jy ! Total flux subtracted in 100 components = 0.105289 Jy ! Clean residual min=-0.009097 max=0.010737 Jy/beam ! Clean residual mean=0.000012 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.105289 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.105289 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076867Jy sigma=1.193605 ! Fit after self-cal, rms=0.076670Jy sigma=1.187044 ! Inverting map and beam ! Estimated beam: bmin=0.6181 mas, bmaj=1.673 mas, bpa=2.866 degrees ! Estimated noise=1.91886 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7782 mas, bmaj=1.989 mas, bpa=1.048 degrees ! Estimated noise=1.17627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923393 Jy ! Component: 100 - total flux cleaned = 0.0114747 Jy ! Component: 150 - total flux cleaned = 0.0117194 Jy ! Component: 200 - total flux cleaned = 0.0117669 Jy ! Total flux subtracted in 200 components = 0.0117669 Jy ! Clean residual min=-0.005886 max=0.006247 Jy/beam ! Clean residual mean=0.000043 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.117056 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.117056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076205Jy sigma=1.173964 ! Fit after self-cal, rms=0.076177Jy sigma=1.173773 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7782 x 1.989 at 1.048 degrees (North through East) ! Clean map min=-0.0053185 max=0.10757 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00811 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.11 KP 1.00* ! LA 1.11 MK 0.99 OV 0.88 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00914 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.00* KP 1.00* ! LA 0.98 MK 0.99 OV 0.94 PT 1.09 ! SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992096 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.10 KP 1.00* ! LA 1.04 MK 0.96 OV 0.91 PT 1.14 ! SC 0.87 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.076177Jy sigma=1.173773 ! Fit after self-cal, rms=0.075930Jy sigma=1.162583 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075930Jy sigma=1.162583 ! Fit after self-cal, rms=0.075940Jy sigma=1.162563 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7667 mas, bmaj=1.961 mas, bpa=2 degrees ! Estimated noise=1.15482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.63362e-06 Jy ! Component: 100 - total flux cleaned = 8.54412e-06 Jy ! Component: 150 - total flux cleaned = -2.80727e-05 Jy ! Component: 200 - total flux cleaned = -5.77954e-05 Jy ! Total flux subtracted in 200 components = -5.77954e-05 Jy ! Clean residual min=-0.005300 max=0.005418 Jy/beam ! Clean residual mean=0.000034 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.116998 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.116998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075850Jy sigma=1.161733 ! Fit after self-cal, rms=0.075825Jy sigma=1.161636 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075825Jy sigma=1.161636 ! Fit after self-cal, rms=0.063923Jy sigma=0.967332 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578899 Jy ! Component: 100 - total flux cleaned = 0.00722739 Jy ! Component: 150 - total flux cleaned = 0.00729614 Jy ! Component: 200 - total flux cleaned = 0.00732401 Jy ! Total flux subtracted in 200 components = 0.00732401 Jy ! Clean residual min=-0.004625 max=0.004573 Jy/beam ! Clean residual mean=-0.000004 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.124322 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.124322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063626Jy sigma=0.960651 ! Fit after self-cal, rms=0.062804Jy sigma=0.950937 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7667 x 1.961 at 2 degrees (North through East) ! Clean map min=-0.0041921 max=0.11183 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062804Jy sigma=0.950937 ! Fit after self-cal, rms=0.060868Jy sigma=0.942641 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060868Jy sigma=0.942641 ! Fit after self-cal, rms=0.060765Jy sigma=0.941756 ! Inverting map and beam ! Estimated beam: bmin=0.7593 mas, bmaj=1.952 mas, bpa=2.036 degrees ! Estimated noise=1.13512 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504704 Jy ! Component: 100 - total flux cleaned = -0.000540651 Jy ! Component: 150 - total flux cleaned = -0.000541915 Jy ! Component: 200 - total flux cleaned = -0.000519736 Jy ! Total flux subtracted in 200 components = -0.000519736 Jy ! Clean residual min=-0.004673 max=0.003826 Jy/beam ! Clean residual mean=-0.000004 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.123803 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.123803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060701Jy sigma=0.941129 ! Fit after self-cal, rms=0.060678Jy sigma=0.940989 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060678Jy sigma=0.940989 ! Fit after self-cal, rms=0.060628Jy sigma=0.938142 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060628Jy sigma=0.938142 ! Fit after self-cal, rms=0.060657Jy sigma=0.937862 ! Inverting map and beam ! Estimated beam: bmin=0.7548 mas, bmaj=1.934 mas, bpa=2.289 degrees ! Estimated noise=1.12005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000785018 Jy ! Component: 100 - total flux cleaned = -0.000752706 Jy ! Component: 150 - total flux cleaned = -0.00067072 Jy ! Component: 200 - total flux cleaned = -0.000622118 Jy ! Total flux subtracted in 200 components = -0.000622118 Jy ! Clean residual min=-0.004438 max=0.003775 Jy/beam ! Clean residual mean=-0.000005 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.12318 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.12318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060613Jy sigma=0.937239 ! Fit after self-cal, rms=0.060619Jy sigma=0.937191 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.405 mas, bmaj=6.472 mas, bpa=14.4 degrees ! Estimated noise=1.54558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000990584 Jy ! Component: 100 - total flux cleaned = 0.00109618 Jy ! Component: 150 - total flux cleaned = 0.00119344 Jy ! Component: 200 - total flux cleaned = 0.00125528 Jy ! Total flux subtracted in 200 components = 0.00125528 Jy ! Clean residual min=-0.004716 max=0.004859 Jy/beam ! Clean residual mean=-0.000010 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.124436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.124436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060618Jy sigma=0.937568 ! Fit after self-cal, rms=0.060622Jy sigma=0.937521 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6109 mas, bmaj=1.655 mas, bpa=3.381 degrees ! Estimated noise=1.80843 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.090008 Jy ! Component: 100 - total flux cleaned = 0.108984 Jy ! Component: 150 - total flux cleaned = 0.116472 Jy ! Component: 200 - total flux cleaned = 0.118815 Jy ! Total flux subtracted in 200 components = 0.118815 Jy ! Clean residual min=-0.006333 max=0.005664 Jy/beam ! Clean residual mean=-0.000001 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.118815 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.118815 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7548 mas, bmaj=1.934 mas, bpa=2.289 degrees ! Estimated noise=1.12005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329287 Jy ! Component: 100 - total flux cleaned = 0.00397546 Jy ! Component: 150 - total flux cleaned = 0.00409862 Jy ! Component: 200 - total flux cleaned = 0.00414903 Jy ! Total flux subtracted in 200 components = 0.00414903 Jy ! Clean residual min=-0.004494 max=0.003707 Jy/beam ! Clean residual mean=-0.000006 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.122964 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.122964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.405 mas, bmaj=6.472 mas, bpa=14.4 degrees ! Estimated noise=1.54558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118059 Jy ! Component: 100 - total flux cleaned = 0.0012843 Jy ! Component: 150 - total flux cleaned = 0.00135052 Jy ! Component: 200 - total flux cleaned = 0.00144521 Jy ! Total flux subtracted in 200 components = 0.00144521 Jy ! Clean residual min=-0.004727 max=0.004826 Jy/beam ! Clean residual mean=-0.000010 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.124409 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 25 components and 0.124409 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7548 mas, bmaj=1.934 mas, bpa=2.289 degrees ! Estimated noise=1.12005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00090189 Jy ! Component: 100 - total flux cleaned = -0.000975407 Jy ! Component: 150 - total flux cleaned = -0.00102103 Jy ! Component: 200 - total flux cleaned = -0.00102196 Jy ! Total flux subtracted in 200 components = -0.00102196 Jy ! Clean residual min=-0.004466 max=0.003686 Jy/beam ! Clean residual mean=-0.000005 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.123387 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.123387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060614Jy sigma=0.937242 ! Fit after self-cal, rms=0.060610Jy sigma=0.937200 wmodel J1037-2705_X_2007_01_11_yyk\_map.mod ! Writing 30 model components to file: J1037-2705_X_2007_01_11_yyk_map.mod wobs J1037-2705_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J1037-2705_X_2007_01_11_yyk_uvs.fits wwins J1037-2705_X_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J1037-2705_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185752 Jy ! Component: 100 - total flux cleaned = -0.00279601 Jy ! Component: 150 - total flux cleaned = -0.00347934 Jy ! Component: 200 - total flux cleaned = -0.00400793 Jy ! Component: 250 - total flux cleaned = -0.00450973 Jy ! Component: 300 - total flux cleaned = -0.00482604 Jy ! Component: 350 - total flux cleaned = -0.00498009 Jy ! Component: 400 - total flux cleaned = -0.00508029 Jy ! Component: 450 - total flux cleaned = -0.00522054 Jy ! Component: 500 - total flux cleaned = -0.00539815 Jy ! Component: 550 - total flux cleaned = -0.00539719 Jy ! Component: 600 - total flux cleaned = -0.00543898 Jy ! Component: 650 - total flux cleaned = -0.00556108 Jy ! Component: 700 - total flux cleaned = -0.00579793 Jy ! Component: 750 - total flux cleaned = -0.00587328 Jy ! Component: 800 - total flux cleaned = -0.00598524 Jy ! Component: 850 - total flux cleaned = -0.00602247 Jy ! Component: 900 - total flux cleaned = -0.00612953 Jy ! Component: 950 - total flux cleaned = -0.00606126 Jy ! Component: 1000 - total flux cleaned = -0.00609528 Jy ! Component: 1050 - total flux cleaned = -0.00602933 Jy ! Component: 1100 - total flux cleaned = -0.00606218 Jy ! Component: 1150 - total flux cleaned = -0.00603074 Jy ! Component: 1200 - total flux cleaned = -0.00596793 Jy ! Component: 1250 - total flux cleaned = -0.00590591 Jy ! Component: 1300 - total flux cleaned = -0.00581497 Jy ! Component: 1350 - total flux cleaned = -0.00563683 Jy ! Component: 1400 - total flux cleaned = -0.00554897 Jy ! Component: 1450 - total flux cleaned = -0.00540501 Jy ! Component: 1500 - total flux cleaned = -0.00531998 Jy ! Component: 1550 - total flux cleaned = -0.0052354 Jy ! Component: 1600 - total flux cleaned = -0.00515248 Jy ! Component: 1650 - total flux cleaned = -0.00512544 Jy ! Component: 1700 - total flux cleaned = -0.00507153 Jy ! Component: 1750 - total flux cleaned = -0.00491261 Jy ! Component: 1800 - total flux cleaned = -0.00480855 Jy ! Component: 1850 - total flux cleaned = -0.00473184 Jy ! Component: 1900 - total flux cleaned = -0.00460436 Jy ! Component: 1950 - total flux cleaned = -0.00447854 Jy ! Component: 2000 - total flux cleaned = -0.00442897 Jy ! Total flux subtracted in 2048 components = -0.00428117 Jy ! Clean residual min=-0.001373 max=0.001407 Jy/beam ! Clean residual mean=0.000003 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.119106 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 167 components and 0.119106 Jy ![Exited script file: muppet] wmap "J1037-2705_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7548 x 1.934 at 2.289 degrees (North through East) ! Clean map min=-0.0027771 max=0.10769 Jy/beam ! Writing clean map to FITS file: J1037-2705_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000437327 device "J1037-2705_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J1037-2705_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21831 1.21831 2.43662 4.87325 9.74649 19.493 38.986 77.9719 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7548 x 1.934 at 2.289 degrees (North through East) ! Clean map min=-0.0027771 max=0.10769 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1037-2705_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J1037-2705_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1037-2705_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:31:53 2008