! Started logfile: J0929-1820_X_2006_12_18_yyk_uvs.log on Mon Jun 16 19:29:20 2008 obs J0929-1820_X_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J0929-1820_X_2006_12_18_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0929-1820 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2161 lines of history. ! ! Reading 2016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0929-1820_X_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.150963 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.813 mas, bpa=4.481 degrees ! Estimated noise=1.54956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10005 Jy ! Component: 100 - total flux cleaned = 0.13995 Jy ! Total flux subtracted in 100 components = 0.13995 Jy ! Clean residual min=-0.010169 max=0.013584 Jy/beam ! Clean residual mean=-0.000023 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 0.13995 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.13995 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.078261Jy sigma=1.243613 ! Fit after self-cal, rms=0.077558Jy sigma=1.234914 ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.813 mas, bpa=4.481 degrees ! Estimated noise=1.54956 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9278 mas, bmaj=2.372 mas, bpa=4.593 degrees ! Estimated noise=0.946877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285505 Jy ! Component: 100 - total flux cleaned = 0.0383971 Jy ! Component: 150 - total flux cleaned = 0.0424442 Jy ! Component: 200 - total flux cleaned = 0.0430983 Jy ! Total flux subtracted in 200 components = 0.0430983 Jy ! Clean residual min=-0.005296 max=0.005629 Jy/beam ! Clean residual mean=0.000015 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.183049 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.183049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071808Jy sigma=1.098048 ! Fit after self-cal, rms=0.071745Jy sigma=1.097718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9278 x 2.372 at 4.593 degrees (North through East) ! Clean map min=-0.0049058 max=0.12137 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01429 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.96 KP 0.91 ! LA 0.97 MK 1.00* NL 0.99 OV 0.99 ! PT 1.12 SC 0.89 ! ! ! Fit before self-cal, rms=0.071745Jy sigma=1.097718 ! Fit after self-cal, rms=0.071206Jy sigma=1.094109 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071206Jy sigma=1.094109 ! Fit after self-cal, rms=0.071202Jy sigma=1.094098 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9191 mas, bmaj=2.347 mas, bpa=5.08 degrees ! Estimated noise=0.94706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217909 Jy ! Component: 100 - total flux cleaned = 0.00248494 Jy ! Component: 150 - total flux cleaned = 0.00276028 Jy ! Component: 200 - total flux cleaned = 0.00294876 Jy ! Total flux subtracted in 200 components = 0.00294876 Jy ! Clean residual min=-0.004639 max=0.004919 Jy/beam ! Clean residual mean=0.000011 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.185997 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.185997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071094Jy sigma=1.091688 ! Fit after self-cal, rms=0.071072Jy sigma=1.091608 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071072Jy sigma=1.091608 ! Fit after self-cal, rms=0.064280Jy sigma=0.982132 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460595 Jy ! Component: 100 - total flux cleaned = 0.00479407 Jy ! Component: 150 - total flux cleaned = 0.00473284 Jy ! Component: 200 - total flux cleaned = 0.0046704 Jy ! Total flux subtracted in 200 components = 0.0046704 Jy ! Clean residual min=-0.004119 max=0.004037 Jy/beam ! Clean residual mean=0.000013 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.190668 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.190668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063921Jy sigma=0.974863 ! Fit after self-cal, rms=0.063443Jy sigma=0.969426 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9191 x 2.347 at 5.08 degrees (North through East) ! Clean map min=-0.0039485 max=0.12221 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063443Jy sigma=0.969426 ! Fit after self-cal, rms=0.063115Jy sigma=0.966818 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063115Jy sigma=0.966818 ! Fit after self-cal, rms=0.063054Jy sigma=0.966429 ! Inverting map and beam ! Estimated beam: bmin=0.9148 mas, bmaj=2.328 mas, bpa=5.544 degrees ! Estimated noise=0.943598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117312 Jy ! Component: 100 - total flux cleaned = 0.00128196 Jy ! Component: 150 - total flux cleaned = 0.00128078 Jy ! Component: 200 - total flux cleaned = 0.00132715 Jy ! Total flux subtracted in 200 components = 0.00132715 Jy ! Clean residual min=-0.004064 max=0.003925 Jy/beam ! Clean residual mean=0.000016 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.191995 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.191995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062981Jy sigma=0.965138 ! Fit after self-cal, rms=0.062943Jy sigma=0.964991 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062943Jy sigma=0.964991 ! Fit after self-cal, rms=0.062655Jy sigma=0.960855 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062655Jy sigma=0.960855 ! Fit after self-cal, rms=0.062636Jy sigma=0.960782 ! Inverting map and beam ! Estimated beam: bmin=0.909 mas, bmaj=2.308 mas, bpa=6.149 degrees ! Estimated noise=0.939165 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559041 Jy ! Component: 100 - total flux cleaned = 0.000711284 Jy ! Component: 150 - total flux cleaned = 0.000802871 Jy ! Component: 200 - total flux cleaned = 0.000890279 Jy ! Total flux subtracted in 200 components = 0.000890279 Jy ! Clean residual min=-0.004017 max=0.003777 Jy/beam ! Clean residual mean=0.000017 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.192885 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.192885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062579Jy sigma=0.959777 ! Fit after self-cal, rms=0.062561Jy sigma=0.959710 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.068 mas, bmaj=4.949 mas, bpa=3.327 degrees ! Estimated noise=1.18576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024379 Jy ! Component: 100 - total flux cleaned = -0.00038582 Jy ! Component: 150 - total flux cleaned = -0.000487625 Jy ! Component: 200 - total flux cleaned = -0.00058075 Jy ! Total flux subtracted in 200 components = -0.00058075 Jy ! Clean residual min=-0.003853 max=0.003702 Jy/beam ! Clean residual mean=0.000035 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.192304 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.192304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062560Jy sigma=0.959679 ! Fit after self-cal, rms=0.062545Jy sigma=0.959632 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6893 mas, bmaj=1.795 mas, bpa=5.312 degrees ! Estimated noise=1.52243 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103223 Jy ! Component: 100 - total flux cleaned = 0.144329 Jy ! Component: 150 - total flux cleaned = 0.164602 Jy ! Component: 200 - total flux cleaned = 0.172698 Jy ! Total flux subtracted in 200 components = 0.172698 Jy ! Clean residual min=-0.006467 max=0.006909 Jy/beam ! Clean residual mean=-0.000008 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.172698 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.172698 Jy ! Inverting map and beam ! Estimated beam: bmin=0.909 mas, bmaj=2.308 mas, bpa=6.149 degrees ! Estimated noise=0.939165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105697 Jy ! Component: 100 - total flux cleaned = 0.0153904 Jy ! Component: 150 - total flux cleaned = 0.0171783 Jy ! Component: 200 - total flux cleaned = 0.0184012 Jy ! Total flux subtracted in 200 components = 0.0184012 Jy ! Clean residual min=-0.004397 max=0.003607 Jy/beam ! Clean residual mean=0.000012 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.191099 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.191099 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.068 mas, bmaj=4.949 mas, bpa=3.327 degrees ! Estimated noise=1.18576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765963 Jy ! Component: 100 - total flux cleaned = 0.00100319 Jy ! Component: 150 - total flux cleaned = 0.00100234 Jy ! Component: 200 - total flux cleaned = 0.000971652 Jy ! Total flux subtracted in 200 components = 0.000971652 Jy ! Clean residual min=-0.003963 max=0.003652 Jy/beam ! Clean residual mean=0.000034 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.192071 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.192071 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.909 mas, bmaj=2.308 mas, bpa=6.149 degrees ! Estimated noise=0.939165 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152052 Jy ! Component: 100 - total flux cleaned = -3.96842e-05 Jy ! Component: 150 - total flux cleaned = 0.000108944 Jy ! Component: 200 - total flux cleaned = 0.00024653 Jy ! Total flux subtracted in 200 components = 0.00024653 Jy ! Clean residual min=-0.004139 max=0.003634 Jy/beam ! Clean residual mean=0.000015 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.192317 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.192317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062463Jy sigma=0.959210 ! Fit after self-cal, rms=0.062375Jy sigma=0.958535 wmodel J0929-1820_X_2006_12_18_yyk\_map.mod ! Writing 90 model components to file: J0929-1820_X_2006_12_18_yyk_map.mod wobs J0929-1820_X_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J0929-1820_X_2006_12_18_yyk_uvs.fits wwins J0929-1820_X_2006_12_18_yyk\_map.win ! wwins: Wrote 2 windows to J0929-1820_X_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000946987 Jy ! Component: 100 - total flux cleaned = -0.001014 Jy ! Component: 150 - total flux cleaned = -0.000895628 Jy ! Component: 200 - total flux cleaned = -0.0008406 Jy ! Component: 250 - total flux cleaned = -0.000947142 Jy ! Component: 300 - total flux cleaned = -0.00105015 Jy ! Component: 350 - total flux cleaned = -0.00124644 Jy ! Component: 400 - total flux cleaned = -0.00134 Jy ! Component: 450 - total flux cleaned = -0.00156719 Jy ! Component: 500 - total flux cleaned = -0.00174349 Jy ! Component: 550 - total flux cleaned = -0.00208675 Jy ! Component: 600 - total flux cleaned = -0.0023779 Jy ! Component: 650 - total flux cleaned = -0.00270231 Jy ! Component: 700 - total flux cleaned = -0.00301869 Jy ! Component: 750 - total flux cleaned = -0.00336632 Jy ! Component: 800 - total flux cleaned = -0.00366792 Jy ! Component: 850 - total flux cleaned = -0.003999 Jy ! Component: 900 - total flux cleaned = -0.00428712 Jy ! Component: 950 - total flux cleaned = -0.00449963 Jy ! Component: 1000 - total flux cleaned = -0.00474209 Jy ! Component: 1050 - total flux cleaned = -0.00494593 Jy ! Component: 1100 - total flux cleaned = -0.00521203 Jy ! Component: 1150 - total flux cleaned = -0.00537546 Jy ! Component: 1200 - total flux cleaned = -0.00553607 Jy ! Component: 1250 - total flux cleaned = -0.00569402 Jy ! Component: 1300 - total flux cleaned = -0.0059116 Jy ! Component: 1350 - total flux cleaned = -0.0061253 Jy ! Component: 1400 - total flux cleaned = -0.00630638 Jy ! Component: 1450 - total flux cleaned = -0.00642575 Jy ! Component: 1500 - total flux cleaned = -0.00668905 Jy ! Component: 1550 - total flux cleaned = -0.00686152 Jy ! Component: 1600 - total flux cleaned = -0.00703164 Jy ! Component: 1650 - total flux cleaned = -0.00714339 Jy ! Component: 1700 - total flux cleaned = -0.00728045 Jy ! Component: 1750 - total flux cleaned = -0.00738881 Jy ! Component: 1800 - total flux cleaned = -0.00749591 Jy ! Component: 1850 - total flux cleaned = -0.00765475 Jy ! Component: 1900 - total flux cleaned = -0.00775924 Jy ! Component: 1950 - total flux cleaned = -0.00793993 Jy ! Component: 2000 - total flux cleaned = -0.00814329 Jy ! Total flux subtracted in 2048 components = -0.00821879 Jy ! Clean residual min=-0.001540 max=0.001307 Jy/beam ! Clean residual mean=0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.184099 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 217 components and 0.184098 Jy ![Exited script file: muppet] wmap "J0929-1820_X_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.909 x 2.308 at 6.149 degrees (North through East) ! Clean map min=-0.0027813 max=0.12238 Jy/beam ! Writing clean map to FITS file: J0929-1820_X_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000452694 device "J0929-1820_X_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J0929-1820_X_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10976 1.10976 2.21953 4.43905 8.8781 17.7562 35.5124 71.0248 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.909 x 2.308 at 6.149 degrees (North through East) ! Clean map min=-0.0027813 max=0.12238 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0929-1820_X_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J0929-1820_X_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0929-1820_X_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:29:25 2008