! Started logfile: J0902-1415_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:28:10 2008 obs J0902-1415_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J0902-1415_X_2007_01_11_yyk_uve.fits ! AN table 1: 4 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.604167 visibilities/baseline/integration-bin. ! Found source: J0902-1415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0902-1415_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.646976 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6117 mas, bmaj=1.752 mas, bpa=0.6149 degrees ! Estimated noise=2.94059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.511254 Jy ! Component: 100 - total flux cleaned = 0.672435 Jy ! Total flux subtracted in 100 components = 0.672435 Jy ! Clean residual min=-0.050533 max=0.076941 Jy/beam ! Clean residual mean=-0.000180 rms=0.016179 Jy/beam ! Combined flux in latest and established models = 0.672436 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.672436 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.202435Jy sigma=3.267199 ! Fit after self-cal, rms=0.200640Jy sigma=3.231674 ! Inverting map and beam ! Estimated beam: bmin=0.6117 mas, bmaj=1.752 mas, bpa=0.6149 degrees ! Estimated noise=2.94059 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.743 mas, bmaj=1.936 mas, bpa=0.9782 degrees ! Estimated noise=2.40027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100886 Jy ! Component: 100 - total flux cleaned = 0.144839 Jy ! Component: 150 - total flux cleaned = 0.165579 Jy ! Component: 200 - total flux cleaned = 0.168481 Jy ! Total flux subtracted in 200 components = 0.168481 Jy ! Clean residual min=-0.043074 max=0.097775 Jy/beam ! Clean residual mean=-0.000224 rms=0.016813 Jy/beam ! Combined flux in latest and established models = 0.840916 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.840916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165447Jy sigma=2.619580 ! Fit after self-cal, rms=0.165158Jy sigma=2.615086 ! Inverting map ! Added new window around map position (1.4, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104305 Jy ! Component: 100 - total flux cleaned = 0.149602 Jy ! Component: 150 - total flux cleaned = 0.179955 Jy ! Component: 200 - total flux cleaned = 0.19276 Jy ! Total flux subtracted in 200 components = 0.192759 Jy ! Clean residual min=-0.029511 max=0.041722 Jy/beam ! Clean residual mean=-0.000035 rms=0.007381 Jy/beam ! Combined flux in latest and established models = 1.03368 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 1.03368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109723Jy sigma=1.641314 ! Fit after self-cal, rms=0.107332Jy sigma=1.591883 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.743 x 1.936 at 0.9782 degrees (North through East) ! Clean map min=-0.024911 max=0.53303 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02889 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.05 KP 1.00* ! LA 0.97 MK 0.98 OV 0.96 PT 0.96 ! SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02618 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.08 KP 1.00* ! LA 0.95 MK 0.98 OV 0.95 PT 1.01 ! SC 0.86 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01814 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.98 KP 1.00* ! LA 0.95 MK 1.08 OV 1.00 PT 1.02 ! SC 0.75 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.994612 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.09 HN 1.02 KP 1.00* ! LA 0.97 MK 1.04 OV 1.01 PT 1.09 ! SC 0.80 ! ! ! Fit before self-cal, rms=0.107332Jy sigma=1.591883 ! Fit after self-cal, rms=0.098914Jy sigma=1.475075 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098914Jy sigma=1.475075 ! Fit after self-cal, rms=0.098912Jy sigma=1.474999 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7187 mas, bmaj=1.868 mas, bpa=4.991 degrees ! Estimated noise=2.37618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306773 Jy ! Component: 100 - total flux cleaned = 0.0492652 Jy ! Component: 150 - total flux cleaned = 0.0541756 Jy ! Component: 200 - total flux cleaned = 0.0587818 Jy ! Total flux subtracted in 200 components = 0.0587818 Jy ! Clean residual min=-0.022122 max=0.021858 Jy/beam ! Clean residual mean=-0.000007 rms=0.005377 Jy/beam ! Combined flux in latest and established models = 1.09246 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 1.09246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089393Jy sigma=1.308094 ! Fit after self-cal, rms=0.089237Jy sigma=1.301328 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089237Jy sigma=1.301328 ! Fit after self-cal, rms=0.085631Jy sigma=1.247860 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737993 Jy ! Component: 100 - total flux cleaned = 0.0112162 Jy ! Component: 150 - total flux cleaned = 0.0131113 Jy ! Component: 200 - total flux cleaned = 0.0138043 Jy ! Total flux subtracted in 200 components = 0.0138043 Jy ! Clean residual min=-0.020778 max=0.019172 Jy/beam ! Clean residual mean=0.000010 rms=0.004978 Jy/beam ! Combined flux in latest and established models = 1.10626 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 1.10626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082904Jy sigma=1.200793 ! Fit after self-cal, rms=0.082482Jy sigma=1.194138 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7187 x 1.868 at 4.991 degrees (North through East) ! Clean map min=-0.018636 max=0.50921 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082482Jy sigma=1.194138 ! Fit after self-cal, rms=0.077789Jy sigma=1.148891 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077789Jy sigma=1.148891 ! Fit after self-cal, rms=0.077774Jy sigma=1.148373 ! Inverting map and beam ! Estimated beam: bmin=0.7066 mas, bmaj=1.847 mas, bpa=6.33 degrees ! Estimated noise=2.31227 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287506 Jy ! Component: 100 - total flux cleaned = 0.00419855 Jy ! Component: 150 - total flux cleaned = 0.00508196 Jy ! Component: 200 - total flux cleaned = 0.00562024 Jy ! Total flux subtracted in 200 components = 0.00562024 Jy ! Clean residual min=-0.017584 max=0.017873 Jy/beam ! Clean residual mean=-0.000026 rms=0.004413 Jy/beam ! Combined flux in latest and established models = 1.11188 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 1.11188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076036Jy sigma=1.114722 ! Fit after self-cal, rms=0.075947Jy sigma=1.113578 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075947Jy sigma=1.113578 ! Fit after self-cal, rms=0.074626Jy sigma=1.099463 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074626Jy sigma=1.099463 ! Fit after self-cal, rms=0.074627Jy sigma=1.099451 ! Inverting map and beam ! Estimated beam: bmin=0.7045 mas, bmaj=1.843 mas, bpa=6.6 degrees ! Estimated noise=2.2997 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186026 Jy ! Component: 100 - total flux cleaned = 0.00284897 Jy ! Component: 150 - total flux cleaned = 0.00307316 Jy ! Component: 200 - total flux cleaned = 0.00393102 Jy ! Total flux subtracted in 200 components = 0.00393102 Jy ! Clean residual min=-0.016320 max=0.017707 Jy/beam ! Clean residual mean=-0.000028 rms=0.004214 Jy/beam ! Combined flux in latest and established models = 1.11581 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 1.11581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073620Jy sigma=1.079013 ! Fit after self-cal, rms=0.073527Jy sigma=1.078134 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.939 mas, bmaj=4.367 mas, bpa=17.68 degrees ! Estimated noise=3.3928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110214 Jy ! Component: 100 - total flux cleaned = 0.0116071 Jy ! Component: 150 - total flux cleaned = 0.0120957 Jy ! Component: 200 - total flux cleaned = 0.0125087 Jy ! Total flux subtracted in 200 components = 0.0125087 Jy ! Clean residual min=-0.015980 max=0.022145 Jy/beam ! Clean residual mean=-0.000039 rms=0.005758 Jy/beam ! Combined flux in latest and established models = 1.12832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 1.12832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074065Jy sigma=1.099116 ! Fit after self-cal, rms=0.073935Jy sigma=1.096289 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5979 mas, bmaj=1.718 mas, bpa=2.986 degrees ! Estimated noise=2.81383 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.510823 Jy ! Component: 100 - total flux cleaned = 0.692107 Jy ! Component: 150 - total flux cleaned = 0.791422 Jy ! Component: 200 - total flux cleaned = 0.862196 Jy ! Total flux subtracted in 200 components = 0.862196 Jy ! Clean residual min=-0.032290 max=0.038338 Jy/beam ! Clean residual mean=-0.000108 rms=0.009381 Jy/beam ! Combined flux in latest and established models = 0.862196 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.862196 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7045 mas, bmaj=1.843 mas, bpa=6.6 degrees ! Estimated noise=2.2997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695086 Jy ! Component: 100 - total flux cleaned = 0.117055 Jy ! Component: 150 - total flux cleaned = 0.151803 Jy ! Component: 200 - total flux cleaned = 0.178017 Jy ! Total flux subtracted in 200 components = 0.178017 Jy ! Clean residual min=-0.021814 max=0.019940 Jy/beam ! Clean residual mean=-0.000094 rms=0.005799 Jy/beam ! Combined flux in latest and established models = 1.04021 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 1.04021 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.939 mas, bmaj=4.367 mas, bpa=17.68 degrees ! Estimated noise=3.3928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348773 Jy ! Component: 100 - total flux cleaned = 0.0564652 Jy ! Component: 150 - total flux cleaned = 0.0705578 Jy ! Component: 200 - total flux cleaned = 0.0792407 Jy ! Total flux subtracted in 200 components = 0.0792407 Jy ! Clean residual min=-0.017050 max=0.022716 Jy/beam ! Clean residual mean=-0.000061 rms=0.006028 Jy/beam ! Combined flux in latest and established models = 1.11945 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 1.11945 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7045 mas, bmaj=1.843 mas, bpa=6.6 degrees ! Estimated noise=2.2997 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208551 Jy ! Component: 100 - total flux cleaned = -0.0021166 Jy ! Component: 150 - total flux cleaned = -0.00207579 Jy ! Component: 200 - total flux cleaned = -0.00210325 Jy ! Total flux subtracted in 200 components = -0.00210325 Jy ! Clean residual min=-0.017244 max=0.020210 Jy/beam ! Clean residual mean=-0.000017 rms=0.004576 Jy/beam ! Combined flux in latest and established models = 1.11735 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 1.11735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075320Jy sigma=1.128069 ! Fit after self-cal, rms=0.074919Jy sigma=1.118241 wmodel J0902-1415_X_2007_01_11_yyk\_map.mod ! Writing 66 model components to file: J0902-1415_X_2007_01_11_yyk_map.mod wobs J0902-1415_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J0902-1415_X_2007_01_11_yyk_uvs.fits wwins J0902-1415_X_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J0902-1415_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501048 Jy ! Component: 100 - total flux cleaned = 0.00646464 Jy ! Component: 150 - total flux cleaned = 0.00751611 Jy ! Component: 200 - total flux cleaned = 0.00797077 Jy ! Component: 250 - total flux cleaned = 0.00796908 Jy ! Component: 300 - total flux cleaned = 0.00875816 Jy ! Component: 350 - total flux cleaned = 0.00857857 Jy ! Component: 400 - total flux cleaned = 0.00875321 Jy ! Component: 450 - total flux cleaned = 0.00843924 Jy ! Component: 500 - total flux cleaned = 0.00783522 Jy ! Component: 550 - total flux cleaned = 0.00754839 Jy ! Component: 600 - total flux cleaned = 0.00714059 Jy ! Component: 650 - total flux cleaned = 0.006884 Jy ! Component: 700 - total flux cleaned = 0.00663871 Jy ! Component: 750 - total flux cleaned = 0.00640315 Jy ! Component: 800 - total flux cleaned = 0.0064039 Jy ! Component: 850 - total flux cleaned = 0.00607895 Jy ! Component: 900 - total flux cleaned = 0.00597457 Jy ! Component: 950 - total flux cleaned = 0.00646633 Jy ! Component: 1000 - total flux cleaned = 0.00684293 Jy ! Component: 1050 - total flux cleaned = 0.00729803 Jy ! Component: 1100 - total flux cleaned = 0.00764956 Jy ! Component: 1150 - total flux cleaned = 0.00807347 Jy ! Component: 1200 - total flux cleaned = 0.00881132 Jy ! Component: 1250 - total flux cleaned = 0.00952474 Jy ! Component: 1300 - total flux cleaned = 0.0100645 Jy ! Component: 1350 - total flux cleaned = 0.0106624 Jy ! Component: 1400 - total flux cleaned = 0.0112439 Jy ! Component: 1450 - total flux cleaned = 0.011739 Jy ! Component: 1500 - total flux cleaned = 0.0124255 Jy ! Component: 1550 - total flux cleaned = 0.0126228 Jy ! Component: 1600 - total flux cleaned = 0.0128843 Jy ! Component: 1650 - total flux cleaned = 0.0132034 Jy ! Component: 1700 - total flux cleaned = 0.013454 Jy ! Component: 1750 - total flux cleaned = 0.0136981 Jy ! Component: 1800 - total flux cleaned = 0.0139978 Jy ! Component: 1850 - total flux cleaned = 0.014291 Jy ! Component: 1900 - total flux cleaned = 0.0146934 Jy ! Component: 1950 - total flux cleaned = 0.0149181 Jy ! Component: 2000 - total flux cleaned = 0.0151395 Jy ! Total flux subtracted in 2048 components = 0.0153568 Jy ! Clean residual min=-0.003005 max=0.002962 Jy/beam ! Clean residual mean=-0.000001 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.13271 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 208 components and 1.13271 Jy ![Exited script file: muppet] wmap "J0902-1415_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7045 x 1.843 at 6.6 degrees (North through East) ! Clean map min=-0.0073517 max=0.49788 Jy/beam ! Writing clean map to FITS file: J0902-1415_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.497878 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00094634 device "J0902-1415_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J0902-1415_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.570224 0.570224 1.14045 2.2809 4.56179 9.12358 18.2472 36.4943 72.9887 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.497 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7045 x 1.843 at 6.6 degrees (North through East) ! Clean map min=-0.0073517 max=0.49788 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0902-1415_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J0902-1415_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0902-1415_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:28:16 2008