! Started logfile: J0902-1415_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:27:51 2008 obs J0902-1415_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J0902-1415_S_2006_12_18_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J0902-1415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0902-1415_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.38718 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.395 mas, bpa=-4.184 degrees ! Estimated noise=2.33616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.10556 Jy ! Component: 100 - total flux cleaned = 1.39491 Jy ! Total flux subtracted in 100 components = 1.39491 Jy ! Clean residual min=-0.087664 max=0.192197 Jy/beam ! Clean residual mean=0.003747 rms=0.037525 Jy/beam ! Combined flux in latest and established models = 1.39491 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.39491 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.399576Jy sigma=7.201729 ! Fit after self-cal, rms=0.400037Jy sigma=7.185255 ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.395 mas, bpa=-4.184 degrees ! Estimated noise=2.33616 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.965 mas, bpa=-6.888 degrees ! Estimated noise=1.70621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.177762 Jy ! Component: 100 - total flux cleaned = 0.253465 Jy ! Component: 150 - total flux cleaned = 0.274756 Jy ! Component: 200 - total flux cleaned = 0.281225 Jy ! Total flux subtracted in 200 components = 0.281225 Jy ! Clean residual min=-0.101420 max=0.243702 Jy/beam ! Clean residual mean=0.002699 rms=0.049427 Jy/beam ! Combined flux in latest and established models = 1.67614 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 1.67614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350418Jy sigma=6.331453 ! Fit after self-cal, rms=0.350209Jy sigma=6.330287 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 7.965 at -6.888 degrees (North through East) ! Clean map min=-0.099478 max=1.1412 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01715 ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.00* HN 0.94 KP 0.91 ! LA 0.95 MK 1.03 NL 1.07 OV 0.92 ! PT 0.90 SC 0.80 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993688 ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* HN 1.06 KP 0.98 ! LA 0.93 MK 1.10 NL 1.08 OV 0.95 ! PT 0.91 SC 0.79 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.952185 ! Telescope amplitude corrections in sub-array 1: ! BR 1.69 FD 1.00* HN 1.03 KP 0.94 ! LA 0.90 MK 1.06 NL 1.19 OV 0.99 ! PT 0.93 SC 0.77 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02647 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 1.02 KP 0.94 ! LA 0.89 MK 1.08 NL 1.10 OV 0.93 ! PT 0.84 SC 0.80 ! ! ! Fit before self-cal, rms=0.350209Jy sigma=6.330287 ! Fit after self-cal, rms=0.330667Jy sigma=4.981518 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330667Jy sigma=4.981518 ! Fit after self-cal, rms=0.333052Jy sigma=4.965308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.742 mas, bpa=-0.9595 degrees ! Estimated noise=1.65861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -23). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.179825 Jy ! Component: 100 - total flux cleaned = 0.194657 Jy ! Component: 150 - total flux cleaned = 0.190754 Jy ! Component: 200 - total flux cleaned = 0.187572 Jy ! Total flux subtracted in 200 components = 0.187572 Jy ! Clean residual min=-0.044680 max=0.075225 Jy/beam ! Clean residual mean=-0.000172 rms=0.015751 Jy/beam ! Combined flux in latest and established models = 1.86371 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 1.86371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236976Jy sigma=3.333097 ! Fit after self-cal, rms=0.226788Jy sigma=3.206350 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226788Jy sigma=3.206350 ! Fit after self-cal, rms=0.222829Jy sigma=3.130421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, 34.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.065894 Jy ! Component: 100 - total flux cleaned = 0.0707233 Jy ! Component: 150 - total flux cleaned = 0.0693824 Jy ! Component: 200 - total flux cleaned = 0.0694097 Jy ! Total flux subtracted in 200 components = 0.0694097 Jy ! Clean residual min=-0.039134 max=0.036338 Jy/beam ! Clean residual mean=-0.000671 rms=0.011376 Jy/beam ! Combined flux in latest and established models = 1.93312 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 1.93312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186263Jy sigma=2.615894 ! Fit after self-cal, rms=0.185216Jy sigma=2.604595 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.742 at -0.9595 degrees (North through East) ! Clean map min=-0.04007 max=1.1021 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185216Jy sigma=2.604595 ! Fit after self-cal, rms=0.123370Jy sigma=1.918639 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123370Jy sigma=1.918639 ! Fit after self-cal, rms=0.123283Jy sigma=1.917896 ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=7.617 mas, bpa=-1.031 degrees ! Estimated noise=1.62164 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342649 Jy ! Component: 100 - total flux cleaned = 0.0335412 Jy ! Component: 150 - total flux cleaned = 0.0319297 Jy ! Component: 200 - total flux cleaned = 0.0284672 Jy ! Total flux subtracted in 200 components = 0.0284672 Jy ! Clean residual min=-0.025277 max=0.024199 Jy/beam ! Clean residual mean=-0.000200 rms=0.007583 Jy/beam ! Combined flux in latest and established models = 1.96158 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 1.96158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107112Jy sigma=1.645272 ! Fit after self-cal, rms=0.105271Jy sigma=1.625465 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105271Jy sigma=1.625465 ! Fit after self-cal, rms=0.101180Jy sigma=1.577520 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101180Jy sigma=1.577520 ! Fit after self-cal, rms=0.101175Jy sigma=1.577481 ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.597 mas, bpa=-1.294 degrees ! Estimated noise=1.61932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197938 Jy ! Component: 100 - total flux cleaned = 0.0210483 Jy ! Component: 150 - total flux cleaned = 0.0200003 Jy ! Component: 200 - total flux cleaned = 0.0190522 Jy ! Total flux subtracted in 200 components = 0.0190522 Jy ! Clean residual min=-0.021776 max=0.020322 Jy/beam ! Clean residual mean=-0.000186 rms=0.006367 Jy/beam ! Combined flux in latest and established models = 1.98064 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 117 components and 1.98064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094484Jy sigma=1.459431 ! Fit after self-cal, rms=0.093653Jy sigma=1.450372 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.911 mas, bmaj=16.48 mas, bpa=0.4737 degrees ! Estimated noise=2.12489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018114 Jy ! Component: 100 - total flux cleaned = -0.00119196 Jy ! Component: 150 - total flux cleaned = -0.001174 Jy ! Component: 200 - total flux cleaned = -0.00161704 Jy ! Total flux subtracted in 200 components = -0.00161704 Jy ! Clean residual min=-0.028552 max=0.026987 Jy/beam ! Clean residual mean=-0.000485 rms=0.008768 Jy/beam ! Combined flux in latest and established models = 1.97902 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 1.97902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092663Jy sigma=1.421739 ! Fit after self-cal, rms=0.091867Jy sigma=1.413071 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.249 mas, bpa=-1.416 degrees ! Estimated noise=2.17746 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.06542 Jy ! Component: 100 - total flux cleaned = 1.38381 Jy ! Component: 150 - total flux cleaned = 1.56102 Jy ! Component: 200 - total flux cleaned = 1.67854 Jy ! Total flux subtracted in 200 components = 1.67854 Jy ! Clean residual min=-0.044704 max=0.062065 Jy/beam ! Clean residual mean=0.001151 rms=0.015182 Jy/beam ! Combined flux in latest and established models = 1.67854 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 1.67854 Jy ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.597 mas, bpa=-1.294 degrees ! Estimated noise=1.61932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11351 Jy ! Component: 100 - total flux cleaned = 0.182079 Jy ! Component: 150 - total flux cleaned = 0.228063 Jy ! Component: 200 - total flux cleaned = 0.251914 Jy ! Total flux subtracted in 200 components = 0.251914 Jy ! Clean residual min=-0.026375 max=0.026412 Jy/beam ! Clean residual mean=-0.000021 rms=0.007804 Jy/beam ! Combined flux in latest and established models = 1.93045 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 86 components and 1.93045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.911 mas, bmaj=16.48 mas, bpa=0.4737 degrees ! Estimated noise=2.12489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094431 Jy ! Component: 100 - total flux cleaned = 0.0155741 Jy ! Component: 150 - total flux cleaned = 0.0201828 Jy ! Component: 200 - total flux cleaned = 0.0238355 Jy ! Total flux subtracted in 200 components = 0.0238355 Jy ! Clean residual min=-0.021548 max=0.026520 Jy/beam ! Clean residual mean=-0.000264 rms=0.007928 Jy/beam ! Combined flux in latest and established models = 1.95429 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 112 components and 1.95429 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.597 mas, bpa=-1.294 degrees ! Estimated noise=1.61932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00391469 Jy ! Component: 100 - total flux cleaned = -0.00251944 Jy ! Component: 150 - total flux cleaned = -1.01163e-05 Jy ! Component: 200 - total flux cleaned = 0.00326234 Jy ! Total flux subtracted in 200 components = 0.00326234 Jy ! Clean residual min=-0.020305 max=0.019501 Jy/beam ! Clean residual mean=-0.000126 rms=0.005501 Jy/beam ! Combined flux in latest and established models = 1.95755 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 1.95755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085020Jy sigma=1.340452 ! Fit after self-cal, rms=0.082684Jy sigma=1.304687 wmodel J0902-1415_S_2006_12_18_yyk\_map.mod ! Writing 130 model components to file: J0902-1415_S_2006_12_18_yyk_map.mod wobs J0902-1415_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J0902-1415_S_2006_12_18_yyk_uvs.fits wwins J0902-1415_S_2006_12_18_yyk\_map.win ! wwins: Wrote 3 windows to J0902-1415_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00940285 Jy ! Component: 100 - total flux cleaned = -0.0130336 Jy ! Component: 150 - total flux cleaned = -0.01629 Jy ! Component: 200 - total flux cleaned = -0.0192867 Jy ! Component: 250 - total flux cleaned = -0.020676 Jy ! Component: 300 - total flux cleaned = -0.0219904 Jy ! Component: 350 - total flux cleaned = -0.0230265 Jy ! Component: 400 - total flux cleaned = -0.0232224 Jy ! Component: 450 - total flux cleaned = -0.0241544 Jy ! Component: 500 - total flux cleaned = -0.0243298 Jy ! Component: 550 - total flux cleaned = -0.0245075 Jy ! Component: 600 - total flux cleaned = -0.0245088 Jy ! Component: 650 - total flux cleaned = -0.0240345 Jy ! Component: 700 - total flux cleaned = -0.0232653 Jy ! Component: 750 - total flux cleaned = -0.0222318 Jy ! Component: 800 - total flux cleaned = -0.0219466 Jy ! Component: 850 - total flux cleaned = -0.0211146 Jy ! Component: 900 - total flux cleaned = -0.0200356 Jy ! Component: 950 - total flux cleaned = -0.0188632 Jy ! Component: 1000 - total flux cleaned = -0.01773 Jy ! Component: 1050 - total flux cleaned = -0.0167533 Jy ! Component: 1100 - total flux cleaned = -0.0156885 Jy ! Component: 1150 - total flux cleaned = -0.0147692 Jy ! Component: 1200 - total flux cleaned = -0.0139881 Jy ! Component: 1250 - total flux cleaned = -0.0134471 Jy ! Component: 1300 - total flux cleaned = -0.012707 Jy ! Component: 1350 - total flux cleaned = -0.0119857 Jy ! Component: 1400 - total flux cleaned = -0.0110857 Jy ! Component: 1450 - total flux cleaned = -0.0106969 Jy ! Component: 1500 - total flux cleaned = -0.0101243 Jy ! Component: 1550 - total flux cleaned = -0.00938332 Jy ! Component: 1600 - total flux cleaned = -0.00892976 Jy ! Component: 1650 - total flux cleaned = -0.00848866 Jy ! Component: 1700 - total flux cleaned = -0.00797317 Jy ! Component: 1750 - total flux cleaned = -0.00738717 Jy ! Component: 1800 - total flux cleaned = -0.00697552 Jy ! Component: 1850 - total flux cleaned = -0.00633155 Jy ! Component: 1900 - total flux cleaned = -0.00585999 Jy ! Component: 1950 - total flux cleaned = -0.00539702 Jy ! Component: 2000 - total flux cleaned = -0.00524365 Jy ! Total flux subtracted in 2048 components = -0.0050201 Jy ! Clean residual min=-0.003790 max=0.004058 Jy/beam ! Clean residual mean=0.000077 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 1.95253 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 265 components and 1.95253 Jy ![Exited script file: muppet] wmap "J0902-1415_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 7.597 at -1.294 degrees (North through East) ! Clean map min=-0.026511 max=1.1527 Jy/beam ! Writing clean map to FITS file: J0902-1415_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.15271 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00146901 device "J0902-1415_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J0902-1415_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.382316 0.382316 0.764633 1.52927 3.05853 6.11706 12.2341 24.4682 48.9365 97.873 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0044 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 7.597 at -1.294 degrees (North through East) ! Clean map min=-0.026511 max=1.1527 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0902-1415_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J0902-1415_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0902-1415_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:27:57 2008